1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Linux performance counter support for MIPS.
4 *
5 * Copyright (C) 2010 MIPS Technologies, Inc.
6 * Copyright (C) 2011 Cavium Networks, Inc.
7 * Author: Deng-Cheng Zhu
8 *
9 * This code is based on the implementation for ARM, which is in turn
10 * based on the sparc64 perf event code and the x86 code. Performance
11 * counter access is based on the MIPS Oprofile code. And the callchain
12 * support references the code of MIPS stacktrace.c.
13 */
14
15 #include <linux/cpumask.h>
16 #include <linux/interrupt.h>
17 #include <linux/smp.h>
18 #include <linux/kernel.h>
19 #include <linux/perf_event.h>
20 #include <linux/uaccess.h>
21
22 #include <asm/irq.h>
23 #include <asm/irq_regs.h>
24 #include <asm/stacktrace.h>
25 #include <asm/time.h> /* For perf_irq */
26
27 #define MIPS_MAX_HWEVENTS 4
28 #define MIPS_TCS_PER_COUNTER 2
29 #define MIPS_CPUID_TO_COUNTER_MASK (MIPS_TCS_PER_COUNTER - 1)
30
31 struct cpu_hw_events {
32 /* Array of events on this cpu. */
33 struct perf_event *events[MIPS_MAX_HWEVENTS];
34
35 /*
36 * Set the bit (indexed by the counter number) when the counter
37 * is used for an event.
38 */
39 unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
40
41 /*
42 * Software copy of the control register for each performance counter.
43 * MIPS CPUs vary in performance counters. They use this differently,
44 * and even may not use it.
45 */
46 unsigned int saved_ctrl[MIPS_MAX_HWEVENTS];
47 };
48 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
49 .saved_ctrl = {0},
50 };
51
52 /* The description of MIPS performance events. */
53 struct mips_perf_event {
54 unsigned int event_id;
55 /*
56 * MIPS performance counters are indexed starting from 0.
57 * CNTR_EVEN indicates the indexes of the counters to be used are
58 * even numbers.
59 */
60 unsigned int cntr_mask;
61 #define CNTR_EVEN 0x55555555
62 #define CNTR_ODD 0xaaaaaaaa
63 #define CNTR_ALL 0xffffffff
64 enum {
65 T = 0,
66 V = 1,
67 P = 2,
68 } range;
69 };
70
71 static struct mips_perf_event raw_event;
72 static DEFINE_MUTEX(raw_event_mutex);
73
74 #define C(x) PERF_COUNT_HW_CACHE_##x
75
76 struct mips_pmu {
77 u64 max_period;
78 u64 valid_count;
79 u64 overflow;
80 const char *name;
81 int irq;
82 u64 (*read_counter)(unsigned int idx);
83 void (*write_counter)(unsigned int idx, u64 val);
84 const struct mips_perf_event *(*map_raw_event)(u64 config);
85 const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
86 const struct mips_perf_event (*cache_event_map)
87 [PERF_COUNT_HW_CACHE_MAX]
88 [PERF_COUNT_HW_CACHE_OP_MAX]
89 [PERF_COUNT_HW_CACHE_RESULT_MAX];
90 unsigned int num_counters;
91 };
92
93 static int counter_bits;
94 static struct mips_pmu mipspmu;
95
96 #define M_PERFCTL_EVENT(event) (((event) << MIPS_PERFCTRL_EVENT_S) & \
97 MIPS_PERFCTRL_EVENT)
98 #define M_PERFCTL_VPEID(vpe) ((vpe) << MIPS_PERFCTRL_VPEID_S)
99
100 #ifdef CONFIG_CPU_BMIPS5000
101 #define M_PERFCTL_MT_EN(filter) 0
102 #else /* !CONFIG_CPU_BMIPS5000 */
103 #define M_PERFCTL_MT_EN(filter) (filter)
104 #endif /* CONFIG_CPU_BMIPS5000 */
105
106 #define M_TC_EN_ALL M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_ALL)
107 #define M_TC_EN_VPE M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_VPE)
108 #define M_TC_EN_TC M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_TC)
109
110 #define M_PERFCTL_COUNT_EVENT_WHENEVER (MIPS_PERFCTRL_EXL | \
111 MIPS_PERFCTRL_K | \
112 MIPS_PERFCTRL_U | \
113 MIPS_PERFCTRL_S | \
114 MIPS_PERFCTRL_IE)
115
116 #ifdef CONFIG_MIPS_MT_SMP
117 #define M_PERFCTL_CONFIG_MASK 0x3fff801f
118 #else
119 #define M_PERFCTL_CONFIG_MASK 0x1f
120 #endif
121
122 #define CNTR_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
123
124 #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
125 static DEFINE_RWLOCK(pmuint_rwlock);
126
127 #if defined(CONFIG_CPU_BMIPS5000)
128 #define vpe_id() (cpu_has_mipsmt_pertccounters ? \
129 0 : (smp_processor_id() & MIPS_CPUID_TO_COUNTER_MASK))
130 #else
131 #define vpe_id() (cpu_has_mipsmt_pertccounters ? \
132 0 : cpu_vpe_id(¤t_cpu_data))
133 #endif
134
135 /* Copied from op_model_mipsxx.c */
vpe_shift(void)136 static unsigned int vpe_shift(void)
137 {
138 if (num_possible_cpus() > 1)
139 return 1;
140
141 return 0;
142 }
143
counters_total_to_per_cpu(unsigned int counters)144 static unsigned int counters_total_to_per_cpu(unsigned int counters)
145 {
146 return counters >> vpe_shift();
147 }
148
149 #else /* !CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */
150 #define vpe_id() 0
151
152 #endif /* CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */
153
154 static void resume_local_counters(void);
155 static void pause_local_counters(void);
156 static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
157 static int mipsxx_pmu_handle_shared_irq(void);
158
159 /* 0: Not Loongson-3
160 * 1: Loongson-3A1000/3B1000/3B1500
161 * 2: Loongson-3A2000/3A3000
162 * 3: Loongson-3A4000+
163 */
164
165 #define LOONGSON_PMU_TYPE0 0
166 #define LOONGSON_PMU_TYPE1 1
167 #define LOONGSON_PMU_TYPE2 2
168 #define LOONGSON_PMU_TYPE3 3
169
get_loongson3_pmu_type(void)170 static inline int get_loongson3_pmu_type(void)
171 {
172 if (boot_cpu_type() != CPU_LOONGSON64)
173 return LOONGSON_PMU_TYPE0;
174 if ((boot_cpu_data.processor_id & PRID_COMP_MASK) == PRID_COMP_LEGACY)
175 return LOONGSON_PMU_TYPE1;
176 if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C)
177 return LOONGSON_PMU_TYPE2;
178 if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G)
179 return LOONGSON_PMU_TYPE3;
180
181 return LOONGSON_PMU_TYPE0;
182 }
183
mipsxx_pmu_swizzle_perf_idx(unsigned int idx)184 static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
185 {
186 if (vpe_id() == 1)
187 idx = (idx + 2) & 3;
188 return idx;
189 }
190
mipsxx_pmu_read_counter(unsigned int idx)191 static u64 mipsxx_pmu_read_counter(unsigned int idx)
192 {
193 idx = mipsxx_pmu_swizzle_perf_idx(idx);
194
195 switch (idx) {
196 case 0:
197 /*
198 * The counters are unsigned, we must cast to truncate
199 * off the high bits.
200 */
201 return (u32)read_c0_perfcntr0();
202 case 1:
203 return (u32)read_c0_perfcntr1();
204 case 2:
205 return (u32)read_c0_perfcntr2();
206 case 3:
207 return (u32)read_c0_perfcntr3();
208 default:
209 WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
210 return 0;
211 }
212 }
213
mipsxx_pmu_read_counter_64(unsigned int idx)214 static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
215 {
216 u64 mask = CNTR_BIT_MASK(counter_bits);
217 idx = mipsxx_pmu_swizzle_perf_idx(idx);
218
219 switch (idx) {
220 case 0:
221 return read_c0_perfcntr0_64() & mask;
222 case 1:
223 return read_c0_perfcntr1_64() & mask;
224 case 2:
225 return read_c0_perfcntr2_64() & mask;
226 case 3:
227 return read_c0_perfcntr3_64() & mask;
228 default:
229 WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
230 return 0;
231 }
232 }
233
mipsxx_pmu_write_counter(unsigned int idx,u64 val)234 static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
235 {
236 idx = mipsxx_pmu_swizzle_perf_idx(idx);
237
238 switch (idx) {
239 case 0:
240 write_c0_perfcntr0(val);
241 return;
242 case 1:
243 write_c0_perfcntr1(val);
244 return;
245 case 2:
246 write_c0_perfcntr2(val);
247 return;
248 case 3:
249 write_c0_perfcntr3(val);
250 return;
251 }
252 }
253
mipsxx_pmu_write_counter_64(unsigned int idx,u64 val)254 static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
255 {
256 val &= CNTR_BIT_MASK(counter_bits);
257 idx = mipsxx_pmu_swizzle_perf_idx(idx);
258
259 switch (idx) {
260 case 0:
261 write_c0_perfcntr0_64(val);
262 return;
263 case 1:
264 write_c0_perfcntr1_64(val);
265 return;
266 case 2:
267 write_c0_perfcntr2_64(val);
268 return;
269 case 3:
270 write_c0_perfcntr3_64(val);
271 return;
272 }
273 }
274
mipsxx_pmu_read_control(unsigned int idx)275 static unsigned int mipsxx_pmu_read_control(unsigned int idx)
276 {
277 idx = mipsxx_pmu_swizzle_perf_idx(idx);
278
279 switch (idx) {
280 case 0:
281 return read_c0_perfctrl0();
282 case 1:
283 return read_c0_perfctrl1();
284 case 2:
285 return read_c0_perfctrl2();
286 case 3:
287 return read_c0_perfctrl3();
288 default:
289 WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
290 return 0;
291 }
292 }
293
mipsxx_pmu_write_control(unsigned int idx,unsigned int val)294 static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
295 {
296 idx = mipsxx_pmu_swizzle_perf_idx(idx);
297
298 switch (idx) {
299 case 0:
300 write_c0_perfctrl0(val);
301 return;
302 case 1:
303 write_c0_perfctrl1(val);
304 return;
305 case 2:
306 write_c0_perfctrl2(val);
307 return;
308 case 3:
309 write_c0_perfctrl3(val);
310 return;
311 }
312 }
313
mipsxx_pmu_alloc_counter(struct cpu_hw_events * cpuc,struct hw_perf_event * hwc)314 static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
315 struct hw_perf_event *hwc)
316 {
317 int i;
318 unsigned long cntr_mask;
319
320 /*
321 * We only need to care the counter mask. The range has been
322 * checked definitely.
323 */
324 if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
325 cntr_mask = (hwc->event_base >> 10) & 0xffff;
326 else
327 cntr_mask = (hwc->event_base >> 8) & 0xffff;
328
329 for (i = mipspmu.num_counters - 1; i >= 0; i--) {
330 /*
331 * Note that some MIPS perf events can be counted by both
332 * even and odd counters, whereas many other are only by
333 * even _or_ odd counters. This introduces an issue that
334 * when the former kind of event takes the counter the
335 * latter kind of event wants to use, then the "counter
336 * allocation" for the latter event will fail. In fact if
337 * they can be dynamically swapped, they both feel happy.
338 * But here we leave this issue alone for now.
339 */
340 if (test_bit(i, &cntr_mask) &&
341 !test_and_set_bit(i, cpuc->used_mask))
342 return i;
343 }
344
345 return -EAGAIN;
346 }
347
mipsxx_pmu_enable_event(struct hw_perf_event * evt,int idx)348 static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
349 {
350 struct perf_event *event = container_of(evt, struct perf_event, hw);
351 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
352 unsigned int range = evt->event_base >> 24;
353
354 WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
355
356 if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
357 cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0x3ff) |
358 (evt->config_base & M_PERFCTL_CONFIG_MASK) |
359 /* Make sure interrupt enabled. */
360 MIPS_PERFCTRL_IE;
361 else
362 cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
363 (evt->config_base & M_PERFCTL_CONFIG_MASK) |
364 /* Make sure interrupt enabled. */
365 MIPS_PERFCTRL_IE;
366
367 if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
368 /* enable the counter for the calling thread */
369 cpuc->saved_ctrl[idx] |=
370 (1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC;
371 } else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) {
372 /* The counter is processor wide. Set it up to count all TCs. */
373 pr_debug("Enabling perf counter for all TCs\n");
374 cpuc->saved_ctrl[idx] |= M_TC_EN_ALL;
375 } else {
376 unsigned int cpu, ctrl;
377
378 /*
379 * Set up the counter for a particular CPU when event->cpu is
380 * a valid CPU number. Otherwise set up the counter for the CPU
381 * scheduling this thread.
382 */
383 cpu = (event->cpu >= 0) ? event->cpu : smp_processor_id();
384
385 ctrl = M_PERFCTL_VPEID(cpu_vpe_id(&cpu_data[cpu]));
386 ctrl |= M_TC_EN_VPE;
387 cpuc->saved_ctrl[idx] |= ctrl;
388 pr_debug("Enabling perf counter for CPU%d\n", cpu);
389 }
390 /*
391 * We do not actually let the counter run. Leave it until start().
392 */
393 }
394
mipsxx_pmu_disable_event(int idx)395 static void mipsxx_pmu_disable_event(int idx)
396 {
397 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
398 unsigned long flags;
399
400 WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
401
402 local_irq_save(flags);
403 cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
404 ~M_PERFCTL_COUNT_EVENT_WHENEVER;
405 mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
406 local_irq_restore(flags);
407 }
408
mipspmu_event_set_period(struct perf_event * event,struct hw_perf_event * hwc,int idx)409 static int mipspmu_event_set_period(struct perf_event *event,
410 struct hw_perf_event *hwc,
411 int idx)
412 {
413 u64 left = local64_read(&hwc->period_left);
414 u64 period = hwc->sample_period;
415 int ret = 0;
416
417 if (unlikely((left + period) & (1ULL << 63))) {
418 /* left underflowed by more than period. */
419 left = period;
420 local64_set(&hwc->period_left, left);
421 hwc->last_period = period;
422 ret = 1;
423 } else if (unlikely((left + period) <= period)) {
424 /* left underflowed by less than period. */
425 left += period;
426 local64_set(&hwc->period_left, left);
427 hwc->last_period = period;
428 ret = 1;
429 }
430
431 if (left > mipspmu.max_period) {
432 left = mipspmu.max_period;
433 local64_set(&hwc->period_left, left);
434 }
435
436 local64_set(&hwc->prev_count, mipspmu.overflow - left);
437
438 if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
439 mipsxx_pmu_write_control(idx,
440 M_PERFCTL_EVENT(hwc->event_base & 0x3ff));
441
442 mipspmu.write_counter(idx, mipspmu.overflow - left);
443
444 perf_event_update_userpage(event);
445
446 return ret;
447 }
448
mipspmu_event_update(struct perf_event * event,struct hw_perf_event * hwc,int idx)449 static void mipspmu_event_update(struct perf_event *event,
450 struct hw_perf_event *hwc,
451 int idx)
452 {
453 u64 prev_raw_count, new_raw_count;
454 u64 delta;
455
456 again:
457 prev_raw_count = local64_read(&hwc->prev_count);
458 new_raw_count = mipspmu.read_counter(idx);
459
460 if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
461 new_raw_count) != prev_raw_count)
462 goto again;
463
464 delta = new_raw_count - prev_raw_count;
465
466 local64_add(delta, &event->count);
467 local64_sub(delta, &hwc->period_left);
468 }
469
mipspmu_start(struct perf_event * event,int flags)470 static void mipspmu_start(struct perf_event *event, int flags)
471 {
472 struct hw_perf_event *hwc = &event->hw;
473
474 if (flags & PERF_EF_RELOAD)
475 WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
476
477 hwc->state = 0;
478
479 /* Set the period for the event. */
480 mipspmu_event_set_period(event, hwc, hwc->idx);
481
482 /* Enable the event. */
483 mipsxx_pmu_enable_event(hwc, hwc->idx);
484 }
485
mipspmu_stop(struct perf_event * event,int flags)486 static void mipspmu_stop(struct perf_event *event, int flags)
487 {
488 struct hw_perf_event *hwc = &event->hw;
489
490 if (!(hwc->state & PERF_HES_STOPPED)) {
491 /* We are working on a local event. */
492 mipsxx_pmu_disable_event(hwc->idx);
493 barrier();
494 mipspmu_event_update(event, hwc, hwc->idx);
495 hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
496 }
497 }
498
mipspmu_add(struct perf_event * event,int flags)499 static int mipspmu_add(struct perf_event *event, int flags)
500 {
501 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
502 struct hw_perf_event *hwc = &event->hw;
503 int idx;
504 int err = 0;
505
506 perf_pmu_disable(event->pmu);
507
508 /* To look for a free counter for this event. */
509 idx = mipsxx_pmu_alloc_counter(cpuc, hwc);
510 if (idx < 0) {
511 err = idx;
512 goto out;
513 }
514
515 /*
516 * If there is an event in the counter we are going to use then
517 * make sure it is disabled.
518 */
519 event->hw.idx = idx;
520 mipsxx_pmu_disable_event(idx);
521 cpuc->events[idx] = event;
522
523 hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
524 if (flags & PERF_EF_START)
525 mipspmu_start(event, PERF_EF_RELOAD);
526
527 /* Propagate our changes to the userspace mapping. */
528 perf_event_update_userpage(event);
529
530 out:
531 perf_pmu_enable(event->pmu);
532 return err;
533 }
534
mipspmu_del(struct perf_event * event,int flags)535 static void mipspmu_del(struct perf_event *event, int flags)
536 {
537 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
538 struct hw_perf_event *hwc = &event->hw;
539 int idx = hwc->idx;
540
541 WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
542
543 mipspmu_stop(event, PERF_EF_UPDATE);
544 cpuc->events[idx] = NULL;
545 clear_bit(idx, cpuc->used_mask);
546
547 perf_event_update_userpage(event);
548 }
549
mipspmu_read(struct perf_event * event)550 static void mipspmu_read(struct perf_event *event)
551 {
552 struct hw_perf_event *hwc = &event->hw;
553
554 /* Don't read disabled counters! */
555 if (hwc->idx < 0)
556 return;
557
558 mipspmu_event_update(event, hwc, hwc->idx);
559 }
560
mipspmu_enable(struct pmu * pmu)561 static void mipspmu_enable(struct pmu *pmu)
562 {
563 #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
564 write_unlock(&pmuint_rwlock);
565 #endif
566 resume_local_counters();
567 }
568
569 /*
570 * MIPS performance counters can be per-TC. The control registers can
571 * not be directly accessed across CPUs. Hence if we want to do global
572 * control, we need cross CPU calls. on_each_cpu() can help us, but we
573 * can not make sure this function is called with interrupts enabled. So
574 * here we pause local counters and then grab a rwlock and leave the
575 * counters on other CPUs alone. If any counter interrupt raises while
576 * we own the write lock, simply pause local counters on that CPU and
577 * spin in the handler. Also we know we won't be switched to another
578 * CPU after pausing local counters and before grabbing the lock.
579 */
mipspmu_disable(struct pmu * pmu)580 static void mipspmu_disable(struct pmu *pmu)
581 {
582 pause_local_counters();
583 #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
584 write_lock(&pmuint_rwlock);
585 #endif
586 }
587
588 static atomic_t active_events = ATOMIC_INIT(0);
589 static DEFINE_MUTEX(pmu_reserve_mutex);
590 static int (*save_perf_irq)(void);
591
mipspmu_get_irq(void)592 static int mipspmu_get_irq(void)
593 {
594 int err;
595
596 if (mipspmu.irq >= 0) {
597 /* Request my own irq handler. */
598 err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
599 IRQF_PERCPU | IRQF_NOBALANCING |
600 IRQF_NO_THREAD | IRQF_NO_SUSPEND |
601 IRQF_SHARED,
602 "mips_perf_pmu", &mipspmu);
603 if (err) {
604 pr_warn("Unable to request IRQ%d for MIPS performance counters!\n",
605 mipspmu.irq);
606 }
607 } else if (cp0_perfcount_irq < 0) {
608 /*
609 * We are sharing the irq number with the timer interrupt.
610 */
611 save_perf_irq = perf_irq;
612 perf_irq = mipsxx_pmu_handle_shared_irq;
613 err = 0;
614 } else {
615 pr_warn("The platform hasn't properly defined its interrupt controller\n");
616 err = -ENOENT;
617 }
618
619 return err;
620 }
621
mipspmu_free_irq(void)622 static void mipspmu_free_irq(void)
623 {
624 if (mipspmu.irq >= 0)
625 free_irq(mipspmu.irq, &mipspmu);
626 else if (cp0_perfcount_irq < 0)
627 perf_irq = save_perf_irq;
628 }
629
630 /*
631 * mipsxx/rm9000/loongson2 have different performance counters, they have
632 * specific low-level init routines.
633 */
634 static void reset_counters(void *arg);
635 static int __hw_perf_event_init(struct perf_event *event);
636
hw_perf_event_destroy(struct perf_event * event)637 static void hw_perf_event_destroy(struct perf_event *event)
638 {
639 if (atomic_dec_and_mutex_lock(&active_events,
640 &pmu_reserve_mutex)) {
641 /*
642 * We must not call the destroy function with interrupts
643 * disabled.
644 */
645 on_each_cpu(reset_counters,
646 (void *)(long)mipspmu.num_counters, 1);
647 mipspmu_free_irq();
648 mutex_unlock(&pmu_reserve_mutex);
649 }
650 }
651
mipspmu_event_init(struct perf_event * event)652 static int mipspmu_event_init(struct perf_event *event)
653 {
654 int err = 0;
655
656 /* does not support taken branch sampling */
657 if (has_branch_stack(event))
658 return -EOPNOTSUPP;
659
660 switch (event->attr.type) {
661 case PERF_TYPE_RAW:
662 case PERF_TYPE_HARDWARE:
663 case PERF_TYPE_HW_CACHE:
664 break;
665
666 default:
667 return -ENOENT;
668 }
669
670 if (event->cpu >= 0 && !cpu_online(event->cpu))
671 return -ENODEV;
672
673 if (!atomic_inc_not_zero(&active_events)) {
674 mutex_lock(&pmu_reserve_mutex);
675 if (atomic_read(&active_events) == 0)
676 err = mipspmu_get_irq();
677
678 if (!err)
679 atomic_inc(&active_events);
680 mutex_unlock(&pmu_reserve_mutex);
681 }
682
683 if (err)
684 return err;
685
686 return __hw_perf_event_init(event);
687 }
688
689 static struct pmu pmu = {
690 .pmu_enable = mipspmu_enable,
691 .pmu_disable = mipspmu_disable,
692 .event_init = mipspmu_event_init,
693 .add = mipspmu_add,
694 .del = mipspmu_del,
695 .start = mipspmu_start,
696 .stop = mipspmu_stop,
697 .read = mipspmu_read,
698 };
699
mipspmu_perf_event_encode(const struct mips_perf_event * pev)700 static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
701 {
702 /*
703 * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
704 * event_id.
705 */
706 #ifdef CONFIG_MIPS_MT_SMP
707 if (num_possible_cpus() > 1)
708 return ((unsigned int)pev->range << 24) |
709 (pev->cntr_mask & 0xffff00) |
710 (pev->event_id & 0xff);
711 else
712 #endif /* CONFIG_MIPS_MT_SMP */
713 {
714 if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
715 return (pev->cntr_mask & 0xfffc00) |
716 (pev->event_id & 0x3ff);
717 else
718 return (pev->cntr_mask & 0xffff00) |
719 (pev->event_id & 0xff);
720 }
721 }
722
mipspmu_map_general_event(int idx)723 static const struct mips_perf_event *mipspmu_map_general_event(int idx)
724 {
725
726 if ((*mipspmu.general_event_map)[idx].cntr_mask == 0)
727 return ERR_PTR(-EOPNOTSUPP);
728 return &(*mipspmu.general_event_map)[idx];
729 }
730
mipspmu_map_cache_event(u64 config)731 static const struct mips_perf_event *mipspmu_map_cache_event(u64 config)
732 {
733 unsigned int cache_type, cache_op, cache_result;
734 const struct mips_perf_event *pev;
735
736 cache_type = (config >> 0) & 0xff;
737 if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
738 return ERR_PTR(-EINVAL);
739
740 cache_op = (config >> 8) & 0xff;
741 if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
742 return ERR_PTR(-EINVAL);
743
744 cache_result = (config >> 16) & 0xff;
745 if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
746 return ERR_PTR(-EINVAL);
747
748 pev = &((*mipspmu.cache_event_map)
749 [cache_type]
750 [cache_op]
751 [cache_result]);
752
753 if (pev->cntr_mask == 0)
754 return ERR_PTR(-EOPNOTSUPP);
755
756 return pev;
757
758 }
759
validate_group(struct perf_event * event)760 static int validate_group(struct perf_event *event)
761 {
762 struct perf_event *sibling, *leader = event->group_leader;
763 struct cpu_hw_events fake_cpuc;
764
765 memset(&fake_cpuc, 0, sizeof(fake_cpuc));
766
767 if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0)
768 return -EINVAL;
769
770 for_each_sibling_event(sibling, leader) {
771 if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0)
772 return -EINVAL;
773 }
774
775 if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0)
776 return -EINVAL;
777
778 return 0;
779 }
780
781 /* This is needed by specific irq handlers in perf_event_*.c */
handle_associated_event(struct cpu_hw_events * cpuc,int idx,struct perf_sample_data * data,struct pt_regs * regs)782 static void handle_associated_event(struct cpu_hw_events *cpuc,
783 int idx, struct perf_sample_data *data,
784 struct pt_regs *regs)
785 {
786 struct perf_event *event = cpuc->events[idx];
787 struct hw_perf_event *hwc = &event->hw;
788
789 mipspmu_event_update(event, hwc, idx);
790 data->period = event->hw.last_period;
791 if (!mipspmu_event_set_period(event, hwc, idx))
792 return;
793
794 if (perf_event_overflow(event, data, regs))
795 mipsxx_pmu_disable_event(idx);
796 }
797
798
__n_counters(void)799 static int __n_counters(void)
800 {
801 if (!cpu_has_perf)
802 return 0;
803 if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M))
804 return 1;
805 if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M))
806 return 2;
807 if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M))
808 return 3;
809
810 return 4;
811 }
812
n_counters(void)813 static int n_counters(void)
814 {
815 int counters;
816
817 switch (current_cpu_type()) {
818 case CPU_R10000:
819 counters = 2;
820 break;
821
822 case CPU_R12000:
823 case CPU_R14000:
824 case CPU_R16000:
825 counters = 4;
826 break;
827
828 default:
829 counters = __n_counters();
830 }
831
832 return counters;
833 }
834
loongson3_reset_counters(void * arg)835 static void loongson3_reset_counters(void *arg)
836 {
837 int counters = (int)(long)arg;
838
839 switch (counters) {
840 case 4:
841 mipsxx_pmu_write_control(3, 0);
842 mipspmu.write_counter(3, 0);
843 mipsxx_pmu_write_control(3, 127<<5);
844 mipspmu.write_counter(3, 0);
845 mipsxx_pmu_write_control(3, 191<<5);
846 mipspmu.write_counter(3, 0);
847 mipsxx_pmu_write_control(3, 255<<5);
848 mipspmu.write_counter(3, 0);
849 mipsxx_pmu_write_control(3, 319<<5);
850 mipspmu.write_counter(3, 0);
851 mipsxx_pmu_write_control(3, 383<<5);
852 mipspmu.write_counter(3, 0);
853 mipsxx_pmu_write_control(3, 575<<5);
854 mipspmu.write_counter(3, 0);
855 fallthrough;
856 case 3:
857 mipsxx_pmu_write_control(2, 0);
858 mipspmu.write_counter(2, 0);
859 mipsxx_pmu_write_control(2, 127<<5);
860 mipspmu.write_counter(2, 0);
861 mipsxx_pmu_write_control(2, 191<<5);
862 mipspmu.write_counter(2, 0);
863 mipsxx_pmu_write_control(2, 255<<5);
864 mipspmu.write_counter(2, 0);
865 mipsxx_pmu_write_control(2, 319<<5);
866 mipspmu.write_counter(2, 0);
867 mipsxx_pmu_write_control(2, 383<<5);
868 mipspmu.write_counter(2, 0);
869 mipsxx_pmu_write_control(2, 575<<5);
870 mipspmu.write_counter(2, 0);
871 fallthrough;
872 case 2:
873 mipsxx_pmu_write_control(1, 0);
874 mipspmu.write_counter(1, 0);
875 mipsxx_pmu_write_control(1, 127<<5);
876 mipspmu.write_counter(1, 0);
877 mipsxx_pmu_write_control(1, 191<<5);
878 mipspmu.write_counter(1, 0);
879 mipsxx_pmu_write_control(1, 255<<5);
880 mipspmu.write_counter(1, 0);
881 mipsxx_pmu_write_control(1, 319<<5);
882 mipspmu.write_counter(1, 0);
883 mipsxx_pmu_write_control(1, 383<<5);
884 mipspmu.write_counter(1, 0);
885 mipsxx_pmu_write_control(1, 575<<5);
886 mipspmu.write_counter(1, 0);
887 fallthrough;
888 case 1:
889 mipsxx_pmu_write_control(0, 0);
890 mipspmu.write_counter(0, 0);
891 mipsxx_pmu_write_control(0, 127<<5);
892 mipspmu.write_counter(0, 0);
893 mipsxx_pmu_write_control(0, 191<<5);
894 mipspmu.write_counter(0, 0);
895 mipsxx_pmu_write_control(0, 255<<5);
896 mipspmu.write_counter(0, 0);
897 mipsxx_pmu_write_control(0, 319<<5);
898 mipspmu.write_counter(0, 0);
899 mipsxx_pmu_write_control(0, 383<<5);
900 mipspmu.write_counter(0, 0);
901 mipsxx_pmu_write_control(0, 575<<5);
902 mipspmu.write_counter(0, 0);
903 break;
904 }
905 }
906
reset_counters(void * arg)907 static void reset_counters(void *arg)
908 {
909 int counters = (int)(long)arg;
910
911 if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) {
912 loongson3_reset_counters(arg);
913 return;
914 }
915
916 switch (counters) {
917 case 4:
918 mipsxx_pmu_write_control(3, 0);
919 mipspmu.write_counter(3, 0);
920 fallthrough;
921 case 3:
922 mipsxx_pmu_write_control(2, 0);
923 mipspmu.write_counter(2, 0);
924 fallthrough;
925 case 2:
926 mipsxx_pmu_write_control(1, 0);
927 mipspmu.write_counter(1, 0);
928 fallthrough;
929 case 1:
930 mipsxx_pmu_write_control(0, 0);
931 mipspmu.write_counter(0, 0);
932 break;
933 }
934 }
935
936 /* 24K/34K/1004K/interAptiv/loongson1 cores share the same event map. */
937 static const struct mips_perf_event mipsxxcore_event_map
938 [PERF_COUNT_HW_MAX] = {
939 [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P },
940 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
941 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_EVEN, T },
942 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
943 };
944
945 /* 74K/proAptiv core has different branch event code. */
946 static const struct mips_perf_event mipsxxcore_event_map2
947 [PERF_COUNT_HW_MAX] = {
948 [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P },
949 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
950 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x27, CNTR_EVEN, T },
951 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T },
952 };
953
954 static const struct mips_perf_event i6x00_event_map[PERF_COUNT_HW_MAX] = {
955 [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD },
956 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD },
957 /* These only count dcache, not icache */
958 [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x45, CNTR_EVEN | CNTR_ODD },
959 [PERF_COUNT_HW_CACHE_MISSES] = { 0x48, CNTR_EVEN | CNTR_ODD },
960 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x15, CNTR_EVEN | CNTR_ODD },
961 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x16, CNTR_EVEN | CNTR_ODD },
962 };
963
964 static const struct mips_perf_event loongson3_event_map1[PERF_COUNT_HW_MAX] = {
965 [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN },
966 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD },
967 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN },
968 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD },
969 };
970
971 static const struct mips_perf_event loongson3_event_map2[PERF_COUNT_HW_MAX] = {
972 [PERF_COUNT_HW_CPU_CYCLES] = { 0x80, CNTR_ALL },
973 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x81, CNTR_ALL },
974 [PERF_COUNT_HW_CACHE_MISSES] = { 0x18, CNTR_ALL },
975 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x94, CNTR_ALL },
976 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x9c, CNTR_ALL },
977 };
978
979 static const struct mips_perf_event loongson3_event_map3[PERF_COUNT_HW_MAX] = {
980 [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_ALL },
981 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_ALL },
982 [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x1c, CNTR_ALL },
983 [PERF_COUNT_HW_CACHE_MISSES] = { 0x1d, CNTR_ALL },
984 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_ALL },
985 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x08, CNTR_ALL },
986 };
987
988 static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
989 [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
990 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
991 [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
992 [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL },
993 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
994 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
995 [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
996 };
997
998 static const struct mips_perf_event bmips5000_event_map
999 [PERF_COUNT_HW_MAX] = {
1000 [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, T },
1001 [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T },
1002 [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T },
1003 };
1004
1005 /* 24K/34K/1004K/interAptiv/loongson1 cores share the same cache event map. */
1006 static const struct mips_perf_event mipsxxcore_cache_map
1007 [PERF_COUNT_HW_CACHE_MAX]
1008 [PERF_COUNT_HW_CACHE_OP_MAX]
1009 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1010 [C(L1D)] = {
1011 /*
1012 * Like some other architectures (e.g. ARM), the performance
1013 * counters don't differentiate between read and write
1014 * accesses/misses, so this isn't strictly correct, but it's the
1015 * best we can do. Writes and reads get combined.
1016 */
1017 [C(OP_READ)] = {
1018 [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T },
1019 [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T },
1020 },
1021 [C(OP_WRITE)] = {
1022 [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T },
1023 [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T },
1024 },
1025 },
1026 [C(L1I)] = {
1027 [C(OP_READ)] = {
1028 [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T },
1029 [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T },
1030 },
1031 [C(OP_WRITE)] = {
1032 [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T },
1033 [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T },
1034 },
1035 [C(OP_PREFETCH)] = {
1036 [C(RESULT_ACCESS)] = { 0x14, CNTR_EVEN, T },
1037 /*
1038 * Note that MIPS has only "hit" events countable for
1039 * the prefetch operation.
1040 */
1041 },
1042 },
1043 [C(LL)] = {
1044 [C(OP_READ)] = {
1045 [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P },
1046 [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P },
1047 },
1048 [C(OP_WRITE)] = {
1049 [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P },
1050 [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P },
1051 },
1052 },
1053 [C(DTLB)] = {
1054 [C(OP_READ)] = {
1055 [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T },
1056 [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T },
1057 },
1058 [C(OP_WRITE)] = {
1059 [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T },
1060 [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T },
1061 },
1062 },
1063 [C(ITLB)] = {
1064 [C(OP_READ)] = {
1065 [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T },
1066 [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T },
1067 },
1068 [C(OP_WRITE)] = {
1069 [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T },
1070 [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T },
1071 },
1072 },
1073 [C(BPU)] = {
1074 /* Using the same code for *HW_BRANCH* */
1075 [C(OP_READ)] = {
1076 [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T },
1077 [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T },
1078 },
1079 [C(OP_WRITE)] = {
1080 [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T },
1081 [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T },
1082 },
1083 },
1084 };
1085
1086 /* 74K/proAptiv core has completely different cache event map. */
1087 static const struct mips_perf_event mipsxxcore_cache_map2
1088 [PERF_COUNT_HW_CACHE_MAX]
1089 [PERF_COUNT_HW_CACHE_OP_MAX]
1090 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1091 [C(L1D)] = {
1092 /*
1093 * Like some other architectures (e.g. ARM), the performance
1094 * counters don't differentiate between read and write
1095 * accesses/misses, so this isn't strictly correct, but it's the
1096 * best we can do. Writes and reads get combined.
1097 */
1098 [C(OP_READ)] = {
1099 [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T },
1100 [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T },
1101 },
1102 [C(OP_WRITE)] = {
1103 [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T },
1104 [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T },
1105 },
1106 },
1107 [C(L1I)] = {
1108 [C(OP_READ)] = {
1109 [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T },
1110 [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T },
1111 },
1112 [C(OP_WRITE)] = {
1113 [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T },
1114 [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T },
1115 },
1116 [C(OP_PREFETCH)] = {
1117 [C(RESULT_ACCESS)] = { 0x34, CNTR_EVEN, T },
1118 /*
1119 * Note that MIPS has only "hit" events countable for
1120 * the prefetch operation.
1121 */
1122 },
1123 },
1124 [C(LL)] = {
1125 [C(OP_READ)] = {
1126 [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P },
1127 [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P },
1128 },
1129 [C(OP_WRITE)] = {
1130 [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P },
1131 [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P },
1132 },
1133 },
1134 /*
1135 * 74K core does not have specific DTLB events. proAptiv core has
1136 * "speculative" DTLB events which are numbered 0x63 (even/odd) and
1137 * not included here. One can use raw events if really needed.
1138 */
1139 [C(ITLB)] = {
1140 [C(OP_READ)] = {
1141 [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T },
1142 [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T },
1143 },
1144 [C(OP_WRITE)] = {
1145 [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T },
1146 [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T },
1147 },
1148 },
1149 [C(BPU)] = {
1150 /* Using the same code for *HW_BRANCH* */
1151 [C(OP_READ)] = {
1152 [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T },
1153 [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T },
1154 },
1155 [C(OP_WRITE)] = {
1156 [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T },
1157 [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T },
1158 },
1159 },
1160 };
1161
1162 static const struct mips_perf_event i6x00_cache_map
1163 [PERF_COUNT_HW_CACHE_MAX]
1164 [PERF_COUNT_HW_CACHE_OP_MAX]
1165 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1166 [C(L1D)] = {
1167 [C(OP_READ)] = {
1168 [C(RESULT_ACCESS)] = { 0x46, CNTR_EVEN | CNTR_ODD },
1169 [C(RESULT_MISS)] = { 0x49, CNTR_EVEN | CNTR_ODD },
1170 },
1171 [C(OP_WRITE)] = {
1172 [C(RESULT_ACCESS)] = { 0x47, CNTR_EVEN | CNTR_ODD },
1173 [C(RESULT_MISS)] = { 0x4a, CNTR_EVEN | CNTR_ODD },
1174 },
1175 },
1176 [C(L1I)] = {
1177 [C(OP_READ)] = {
1178 [C(RESULT_ACCESS)] = { 0x84, CNTR_EVEN | CNTR_ODD },
1179 [C(RESULT_MISS)] = { 0x85, CNTR_EVEN | CNTR_ODD },
1180 },
1181 },
1182 [C(DTLB)] = {
1183 /* Can't distinguish read & write */
1184 [C(OP_READ)] = {
1185 [C(RESULT_ACCESS)] = { 0x40, CNTR_EVEN | CNTR_ODD },
1186 [C(RESULT_MISS)] = { 0x41, CNTR_EVEN | CNTR_ODD },
1187 },
1188 [C(OP_WRITE)] = {
1189 [C(RESULT_ACCESS)] = { 0x40, CNTR_EVEN | CNTR_ODD },
1190 [C(RESULT_MISS)] = { 0x41, CNTR_EVEN | CNTR_ODD },
1191 },
1192 },
1193 [C(BPU)] = {
1194 /* Conditional branches / mispredicted */
1195 [C(OP_READ)] = {
1196 [C(RESULT_ACCESS)] = { 0x15, CNTR_EVEN | CNTR_ODD },
1197 [C(RESULT_MISS)] = { 0x16, CNTR_EVEN | CNTR_ODD },
1198 },
1199 },
1200 };
1201
1202 static const struct mips_perf_event loongson3_cache_map1
1203 [PERF_COUNT_HW_CACHE_MAX]
1204 [PERF_COUNT_HW_CACHE_OP_MAX]
1205 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1206 [C(L1D)] = {
1207 /*
1208 * Like some other architectures (e.g. ARM), the performance
1209 * counters don't differentiate between read and write
1210 * accesses/misses, so this isn't strictly correct, but it's the
1211 * best we can do. Writes and reads get combined.
1212 */
1213 [C(OP_READ)] = {
1214 [C(RESULT_MISS)] = { 0x04, CNTR_ODD },
1215 },
1216 [C(OP_WRITE)] = {
1217 [C(RESULT_MISS)] = { 0x04, CNTR_ODD },
1218 },
1219 },
1220 [C(L1I)] = {
1221 [C(OP_READ)] = {
1222 [C(RESULT_MISS)] = { 0x04, CNTR_EVEN },
1223 },
1224 [C(OP_WRITE)] = {
1225 [C(RESULT_MISS)] = { 0x04, CNTR_EVEN },
1226 },
1227 },
1228 [C(DTLB)] = {
1229 [C(OP_READ)] = {
1230 [C(RESULT_MISS)] = { 0x09, CNTR_ODD },
1231 },
1232 [C(OP_WRITE)] = {
1233 [C(RESULT_MISS)] = { 0x09, CNTR_ODD },
1234 },
1235 },
1236 [C(ITLB)] = {
1237 [C(OP_READ)] = {
1238 [C(RESULT_MISS)] = { 0x0c, CNTR_ODD },
1239 },
1240 [C(OP_WRITE)] = {
1241 [C(RESULT_MISS)] = { 0x0c, CNTR_ODD },
1242 },
1243 },
1244 [C(BPU)] = {
1245 /* Using the same code for *HW_BRANCH* */
1246 [C(OP_READ)] = {
1247 [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN },
1248 [C(RESULT_MISS)] = { 0x01, CNTR_ODD },
1249 },
1250 [C(OP_WRITE)] = {
1251 [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN },
1252 [C(RESULT_MISS)] = { 0x01, CNTR_ODD },
1253 },
1254 },
1255 };
1256
1257 static const struct mips_perf_event loongson3_cache_map2
1258 [PERF_COUNT_HW_CACHE_MAX]
1259 [PERF_COUNT_HW_CACHE_OP_MAX]
1260 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1261 [C(L1D)] = {
1262 /*
1263 * Like some other architectures (e.g. ARM), the performance
1264 * counters don't differentiate between read and write
1265 * accesses/misses, so this isn't strictly correct, but it's the
1266 * best we can do. Writes and reads get combined.
1267 */
1268 [C(OP_READ)] = {
1269 [C(RESULT_ACCESS)] = { 0x156, CNTR_ALL },
1270 },
1271 [C(OP_WRITE)] = {
1272 [C(RESULT_ACCESS)] = { 0x155, CNTR_ALL },
1273 [C(RESULT_MISS)] = { 0x153, CNTR_ALL },
1274 },
1275 },
1276 [C(L1I)] = {
1277 [C(OP_READ)] = {
1278 [C(RESULT_MISS)] = { 0x18, CNTR_ALL },
1279 },
1280 [C(OP_WRITE)] = {
1281 [C(RESULT_MISS)] = { 0x18, CNTR_ALL },
1282 },
1283 },
1284 [C(LL)] = {
1285 [C(OP_READ)] = {
1286 [C(RESULT_ACCESS)] = { 0x1b6, CNTR_ALL },
1287 },
1288 [C(OP_WRITE)] = {
1289 [C(RESULT_ACCESS)] = { 0x1b7, CNTR_ALL },
1290 },
1291 [C(OP_PREFETCH)] = {
1292 [C(RESULT_ACCESS)] = { 0x1bf, CNTR_ALL },
1293 },
1294 },
1295 [C(DTLB)] = {
1296 [C(OP_READ)] = {
1297 [C(RESULT_MISS)] = { 0x92, CNTR_ALL },
1298 },
1299 [C(OP_WRITE)] = {
1300 [C(RESULT_MISS)] = { 0x92, CNTR_ALL },
1301 },
1302 },
1303 [C(ITLB)] = {
1304 [C(OP_READ)] = {
1305 [C(RESULT_MISS)] = { 0x1a, CNTR_ALL },
1306 },
1307 [C(OP_WRITE)] = {
1308 [C(RESULT_MISS)] = { 0x1a, CNTR_ALL },
1309 },
1310 },
1311 [C(BPU)] = {
1312 /* Using the same code for *HW_BRANCH* */
1313 [C(OP_READ)] = {
1314 [C(RESULT_ACCESS)] = { 0x94, CNTR_ALL },
1315 [C(RESULT_MISS)] = { 0x9c, CNTR_ALL },
1316 },
1317 },
1318 };
1319
1320 static const struct mips_perf_event loongson3_cache_map3
1321 [PERF_COUNT_HW_CACHE_MAX]
1322 [PERF_COUNT_HW_CACHE_OP_MAX]
1323 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1324 [C(L1D)] = {
1325 /*
1326 * Like some other architectures (e.g. ARM), the performance
1327 * counters don't differentiate between read and write
1328 * accesses/misses, so this isn't strictly correct, but it's the
1329 * best we can do. Writes and reads get combined.
1330 */
1331 [C(OP_READ)] = {
1332 [C(RESULT_ACCESS)] = { 0x1e, CNTR_ALL },
1333 [C(RESULT_MISS)] = { 0x1f, CNTR_ALL },
1334 },
1335 [C(OP_PREFETCH)] = {
1336 [C(RESULT_ACCESS)] = { 0xaa, CNTR_ALL },
1337 [C(RESULT_MISS)] = { 0xa9, CNTR_ALL },
1338 },
1339 },
1340 [C(L1I)] = {
1341 [C(OP_READ)] = {
1342 [C(RESULT_ACCESS)] = { 0x1c, CNTR_ALL },
1343 [C(RESULT_MISS)] = { 0x1d, CNTR_ALL },
1344 },
1345 },
1346 [C(LL)] = {
1347 [C(OP_READ)] = {
1348 [C(RESULT_ACCESS)] = { 0x2e, CNTR_ALL },
1349 [C(RESULT_MISS)] = { 0x2f, CNTR_ALL },
1350 },
1351 },
1352 [C(DTLB)] = {
1353 [C(OP_READ)] = {
1354 [C(RESULT_ACCESS)] = { 0x14, CNTR_ALL },
1355 [C(RESULT_MISS)] = { 0x1b, CNTR_ALL },
1356 },
1357 },
1358 [C(ITLB)] = {
1359 [C(OP_READ)] = {
1360 [C(RESULT_MISS)] = { 0x1a, CNTR_ALL },
1361 },
1362 },
1363 [C(BPU)] = {
1364 /* Using the same code for *HW_BRANCH* */
1365 [C(OP_READ)] = {
1366 [C(RESULT_ACCESS)] = { 0x02, CNTR_ALL },
1367 [C(RESULT_MISS)] = { 0x08, CNTR_ALL },
1368 },
1369 },
1370 };
1371
1372 /* BMIPS5000 */
1373 static const struct mips_perf_event bmips5000_cache_map
1374 [PERF_COUNT_HW_CACHE_MAX]
1375 [PERF_COUNT_HW_CACHE_OP_MAX]
1376 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1377 [C(L1D)] = {
1378 /*
1379 * Like some other architectures (e.g. ARM), the performance
1380 * counters don't differentiate between read and write
1381 * accesses/misses, so this isn't strictly correct, but it's the
1382 * best we can do. Writes and reads get combined.
1383 */
1384 [C(OP_READ)] = {
1385 [C(RESULT_ACCESS)] = { 12, CNTR_EVEN, T },
1386 [C(RESULT_MISS)] = { 12, CNTR_ODD, T },
1387 },
1388 [C(OP_WRITE)] = {
1389 [C(RESULT_ACCESS)] = { 12, CNTR_EVEN, T },
1390 [C(RESULT_MISS)] = { 12, CNTR_ODD, T },
1391 },
1392 },
1393 [C(L1I)] = {
1394 [C(OP_READ)] = {
1395 [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T },
1396 [C(RESULT_MISS)] = { 10, CNTR_ODD, T },
1397 },
1398 [C(OP_WRITE)] = {
1399 [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T },
1400 [C(RESULT_MISS)] = { 10, CNTR_ODD, T },
1401 },
1402 [C(OP_PREFETCH)] = {
1403 [C(RESULT_ACCESS)] = { 23, CNTR_EVEN, T },
1404 /*
1405 * Note that MIPS has only "hit" events countable for
1406 * the prefetch operation.
1407 */
1408 },
1409 },
1410 [C(LL)] = {
1411 [C(OP_READ)] = {
1412 [C(RESULT_ACCESS)] = { 28, CNTR_EVEN, P },
1413 [C(RESULT_MISS)] = { 28, CNTR_ODD, P },
1414 },
1415 [C(OP_WRITE)] = {
1416 [C(RESULT_ACCESS)] = { 28, CNTR_EVEN, P },
1417 [C(RESULT_MISS)] = { 28, CNTR_ODD, P },
1418 },
1419 },
1420 [C(BPU)] = {
1421 /* Using the same code for *HW_BRANCH* */
1422 [C(OP_READ)] = {
1423 [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T },
1424 },
1425 [C(OP_WRITE)] = {
1426 [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T },
1427 },
1428 },
1429 };
1430
1431 static const struct mips_perf_event octeon_cache_map
1432 [PERF_COUNT_HW_CACHE_MAX]
1433 [PERF_COUNT_HW_CACHE_OP_MAX]
1434 [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1435 [C(L1D)] = {
1436 [C(OP_READ)] = {
1437 [C(RESULT_ACCESS)] = { 0x2b, CNTR_ALL },
1438 [C(RESULT_MISS)] = { 0x2e, CNTR_ALL },
1439 },
1440 [C(OP_WRITE)] = {
1441 [C(RESULT_ACCESS)] = { 0x30, CNTR_ALL },
1442 },
1443 },
1444 [C(L1I)] = {
1445 [C(OP_READ)] = {
1446 [C(RESULT_ACCESS)] = { 0x18, CNTR_ALL },
1447 },
1448 [C(OP_PREFETCH)] = {
1449 [C(RESULT_ACCESS)] = { 0x19, CNTR_ALL },
1450 },
1451 },
1452 [C(DTLB)] = {
1453 /*
1454 * Only general DTLB misses are counted use the same event for
1455 * read and write.
1456 */
1457 [C(OP_READ)] = {
1458 [C(RESULT_MISS)] = { 0x35, CNTR_ALL },
1459 },
1460 [C(OP_WRITE)] = {
1461 [C(RESULT_MISS)] = { 0x35, CNTR_ALL },
1462 },
1463 },
1464 [C(ITLB)] = {
1465 [C(OP_READ)] = {
1466 [C(RESULT_MISS)] = { 0x37, CNTR_ALL },
1467 },
1468 },
1469 };
1470
__hw_perf_event_init(struct perf_event * event)1471 static int __hw_perf_event_init(struct perf_event *event)
1472 {
1473 struct perf_event_attr *attr = &event->attr;
1474 struct hw_perf_event *hwc = &event->hw;
1475 const struct mips_perf_event *pev;
1476 int err;
1477
1478 /* Returning MIPS event descriptor for generic perf event. */
1479 if (PERF_TYPE_HARDWARE == event->attr.type) {
1480 if (event->attr.config >= PERF_COUNT_HW_MAX)
1481 return -EINVAL;
1482 pev = mipspmu_map_general_event(event->attr.config);
1483 } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
1484 pev = mipspmu_map_cache_event(event->attr.config);
1485 } else if (PERF_TYPE_RAW == event->attr.type) {
1486 /* We are working on the global raw event. */
1487 mutex_lock(&raw_event_mutex);
1488 pev = mipspmu.map_raw_event(event->attr.config);
1489 } else {
1490 /* The event type is not (yet) supported. */
1491 return -EOPNOTSUPP;
1492 }
1493
1494 if (IS_ERR(pev)) {
1495 if (PERF_TYPE_RAW == event->attr.type)
1496 mutex_unlock(&raw_event_mutex);
1497 return PTR_ERR(pev);
1498 }
1499
1500 /*
1501 * We allow max flexibility on how each individual counter shared
1502 * by the single CPU operates (the mode exclusion and the range).
1503 */
1504 hwc->config_base = MIPS_PERFCTRL_IE;
1505
1506 hwc->event_base = mipspmu_perf_event_encode(pev);
1507 if (PERF_TYPE_RAW == event->attr.type)
1508 mutex_unlock(&raw_event_mutex);
1509
1510 if (!attr->exclude_user)
1511 hwc->config_base |= MIPS_PERFCTRL_U;
1512 if (!attr->exclude_kernel) {
1513 hwc->config_base |= MIPS_PERFCTRL_K;
1514 /* MIPS kernel mode: KSU == 00b || EXL == 1 || ERL == 1 */
1515 hwc->config_base |= MIPS_PERFCTRL_EXL;
1516 }
1517 if (!attr->exclude_hv)
1518 hwc->config_base |= MIPS_PERFCTRL_S;
1519
1520 hwc->config_base &= M_PERFCTL_CONFIG_MASK;
1521 /*
1522 * The event can belong to another cpu. We do not assign a local
1523 * counter for it for now.
1524 */
1525 hwc->idx = -1;
1526 hwc->config = 0;
1527
1528 if (!hwc->sample_period) {
1529 hwc->sample_period = mipspmu.max_period;
1530 hwc->last_period = hwc->sample_period;
1531 local64_set(&hwc->period_left, hwc->sample_period);
1532 }
1533
1534 err = 0;
1535 if (event->group_leader != event)
1536 err = validate_group(event);
1537
1538 event->destroy = hw_perf_event_destroy;
1539
1540 if (err)
1541 event->destroy(event);
1542
1543 return err;
1544 }
1545
pause_local_counters(void)1546 static void pause_local_counters(void)
1547 {
1548 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
1549 int ctr = mipspmu.num_counters;
1550 unsigned long flags;
1551
1552 local_irq_save(flags);
1553 do {
1554 ctr--;
1555 cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr);
1556 mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] &
1557 ~M_PERFCTL_COUNT_EVENT_WHENEVER);
1558 } while (ctr > 0);
1559 local_irq_restore(flags);
1560 }
1561
resume_local_counters(void)1562 static void resume_local_counters(void)
1563 {
1564 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
1565 int ctr = mipspmu.num_counters;
1566
1567 do {
1568 ctr--;
1569 mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]);
1570 } while (ctr > 0);
1571 }
1572
mipsxx_pmu_handle_shared_irq(void)1573 static int mipsxx_pmu_handle_shared_irq(void)
1574 {
1575 struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
1576 struct perf_sample_data data;
1577 unsigned int counters = mipspmu.num_counters;
1578 u64 counter;
1579 int n, handled = IRQ_NONE;
1580 struct pt_regs *regs;
1581
1582 if (cpu_has_perf_cntr_intr_bit && !(read_c0_cause() & CAUSEF_PCI))
1583 return handled;
1584 /*
1585 * First we pause the local counters, so that when we are locked
1586 * here, the counters are all paused. When it gets locked due to
1587 * perf_disable(), the timer interrupt handler will be delayed.
1588 *
1589 * See also mipsxx_pmu_start().
1590 */
1591 pause_local_counters();
1592 #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
1593 read_lock(&pmuint_rwlock);
1594 #endif
1595
1596 regs = get_irq_regs();
1597
1598 perf_sample_data_init(&data, 0, 0);
1599
1600 for (n = counters - 1; n >= 0; n--) {
1601 if (!test_bit(n, cpuc->used_mask))
1602 continue;
1603
1604 counter = mipspmu.read_counter(n);
1605 if (!(counter & mipspmu.overflow))
1606 continue;
1607
1608 handle_associated_event(cpuc, n, &data, regs);
1609 handled = IRQ_HANDLED;
1610 }
1611
1612 #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
1613 read_unlock(&pmuint_rwlock);
1614 #endif
1615 resume_local_counters();
1616
1617 /*
1618 * Do all the work for the pending perf events. We can do this
1619 * in here because the performance counter interrupt is a regular
1620 * interrupt, not NMI.
1621 */
1622 if (handled == IRQ_HANDLED)
1623 irq_work_run();
1624
1625 return handled;
1626 }
1627
mipsxx_pmu_handle_irq(int irq,void * dev)1628 static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
1629 {
1630 return mipsxx_pmu_handle_shared_irq();
1631 }
1632
1633 /* 24K */
1634 #define IS_BOTH_COUNTERS_24K_EVENT(b) \
1635 ((b) == 0 || (b) == 1 || (b) == 11)
1636
1637 /* 34K */
1638 #define IS_BOTH_COUNTERS_34K_EVENT(b) \
1639 ((b) == 0 || (b) == 1 || (b) == 11)
1640 #ifdef CONFIG_MIPS_MT_SMP
1641 #define IS_RANGE_P_34K_EVENT(r, b) \
1642 ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \
1643 (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 || \
1644 (r) == 176 || ((b) >= 50 && (b) <= 55) || \
1645 ((b) >= 64 && (b) <= 67))
1646 #define IS_RANGE_V_34K_EVENT(r) ((r) == 47)
1647 #endif
1648
1649 /* 74K */
1650 #define IS_BOTH_COUNTERS_74K_EVENT(b) \
1651 ((b) == 0 || (b) == 1)
1652
1653 /* proAptiv */
1654 #define IS_BOTH_COUNTERS_PROAPTIV_EVENT(b) \
1655 ((b) == 0 || (b) == 1)
1656 /* P5600 */
1657 #define IS_BOTH_COUNTERS_P5600_EVENT(b) \
1658 ((b) == 0 || (b) == 1)
1659
1660 /* 1004K */
1661 #define IS_BOTH_COUNTERS_1004K_EVENT(b) \
1662 ((b) == 0 || (b) == 1 || (b) == 11)
1663 #ifdef CONFIG_MIPS_MT_SMP
1664 #define IS_RANGE_P_1004K_EVENT(r, b) \
1665 ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \
1666 (b) == 25 || (b) == 36 || (b) == 39 || (r) == 44 || \
1667 (r) == 174 || (r) == 176 || ((b) >= 50 && (b) <= 59) || \
1668 (r) == 188 || (b) == 61 || (b) == 62 || \
1669 ((b) >= 64 && (b) <= 67))
1670 #define IS_RANGE_V_1004K_EVENT(r) ((r) == 47)
1671 #endif
1672
1673 /* interAptiv */
1674 #define IS_BOTH_COUNTERS_INTERAPTIV_EVENT(b) \
1675 ((b) == 0 || (b) == 1 || (b) == 11)
1676 #ifdef CONFIG_MIPS_MT_SMP
1677 /* The P/V/T info is not provided for "(b) == 38" in SUM, assume P. */
1678 #define IS_RANGE_P_INTERAPTIV_EVENT(r, b) \
1679 ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \
1680 (b) == 25 || (b) == 36 || (b) == 38 || (b) == 39 || \
1681 (r) == 44 || (r) == 174 || (r) == 176 || ((b) >= 50 && \
1682 (b) <= 59) || (r) == 188 || (b) == 61 || (b) == 62 || \
1683 ((b) >= 64 && (b) <= 67))
1684 #define IS_RANGE_V_INTERAPTIV_EVENT(r) ((r) == 47 || (r) == 175)
1685 #endif
1686
1687 /* BMIPS5000 */
1688 #define IS_BOTH_COUNTERS_BMIPS5000_EVENT(b) \
1689 ((b) == 0 || (b) == 1)
1690
1691
1692 /*
1693 * For most cores the user can use 0-255 raw events, where 0-127 for the events
1694 * of even counters, and 128-255 for odd counters. Note that bit 7 is used to
1695 * indicate the even/odd bank selector. So, for example, when user wants to take
1696 * the Event Num of 15 for odd counters (by referring to the user manual), then
1697 * 128 needs to be added to 15 as the input for the event config, i.e., 143 (0x8F)
1698 * to be used.
1699 *
1700 * Some newer cores have even more events, in which case the user can use raw
1701 * events 0-511, where 0-255 are for the events of even counters, and 256-511
1702 * are for odd counters, so bit 8 is used to indicate the even/odd bank selector.
1703 */
mipsxx_pmu_map_raw_event(u64 config)1704 static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
1705 {
1706 /* currently most cores have 7-bit event numbers */
1707 int pmu_type;
1708 unsigned int raw_id = config & 0xff;
1709 unsigned int base_id = raw_id & 0x7f;
1710
1711 switch (current_cpu_type()) {
1712 case CPU_24K:
1713 if (IS_BOTH_COUNTERS_24K_EVENT(base_id))
1714 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1715 else
1716 raw_event.cntr_mask =
1717 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1718 #ifdef CONFIG_MIPS_MT_SMP
1719 /*
1720 * This is actually doing nothing. Non-multithreading
1721 * CPUs will not check and calculate the range.
1722 */
1723 raw_event.range = P;
1724 #endif
1725 break;
1726 case CPU_34K:
1727 if (IS_BOTH_COUNTERS_34K_EVENT(base_id))
1728 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1729 else
1730 raw_event.cntr_mask =
1731 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1732 #ifdef CONFIG_MIPS_MT_SMP
1733 if (IS_RANGE_P_34K_EVENT(raw_id, base_id))
1734 raw_event.range = P;
1735 else if (unlikely(IS_RANGE_V_34K_EVENT(raw_id)))
1736 raw_event.range = V;
1737 else
1738 raw_event.range = T;
1739 #endif
1740 break;
1741 case CPU_74K:
1742 case CPU_1074K:
1743 if (IS_BOTH_COUNTERS_74K_EVENT(base_id))
1744 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1745 else
1746 raw_event.cntr_mask =
1747 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1748 #ifdef CONFIG_MIPS_MT_SMP
1749 raw_event.range = P;
1750 #endif
1751 break;
1752 case CPU_PROAPTIV:
1753 if (IS_BOTH_COUNTERS_PROAPTIV_EVENT(base_id))
1754 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1755 else
1756 raw_event.cntr_mask =
1757 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1758 #ifdef CONFIG_MIPS_MT_SMP
1759 raw_event.range = P;
1760 #endif
1761 break;
1762 case CPU_P5600:
1763 case CPU_P6600:
1764 /* 8-bit event numbers */
1765 raw_id = config & 0x1ff;
1766 base_id = raw_id & 0xff;
1767 if (IS_BOTH_COUNTERS_P5600_EVENT(base_id))
1768 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1769 else
1770 raw_event.cntr_mask =
1771 raw_id > 255 ? CNTR_ODD : CNTR_EVEN;
1772 #ifdef CONFIG_MIPS_MT_SMP
1773 raw_event.range = P;
1774 #endif
1775 break;
1776 case CPU_I6400:
1777 case CPU_I6500:
1778 /* 8-bit event numbers */
1779 base_id = config & 0xff;
1780 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1781 break;
1782 case CPU_1004K:
1783 if (IS_BOTH_COUNTERS_1004K_EVENT(base_id))
1784 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1785 else
1786 raw_event.cntr_mask =
1787 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1788 #ifdef CONFIG_MIPS_MT_SMP
1789 if (IS_RANGE_P_1004K_EVENT(raw_id, base_id))
1790 raw_event.range = P;
1791 else if (unlikely(IS_RANGE_V_1004K_EVENT(raw_id)))
1792 raw_event.range = V;
1793 else
1794 raw_event.range = T;
1795 #endif
1796 break;
1797 case CPU_INTERAPTIV:
1798 if (IS_BOTH_COUNTERS_INTERAPTIV_EVENT(base_id))
1799 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1800 else
1801 raw_event.cntr_mask =
1802 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1803 #ifdef CONFIG_MIPS_MT_SMP
1804 if (IS_RANGE_P_INTERAPTIV_EVENT(raw_id, base_id))
1805 raw_event.range = P;
1806 else if (unlikely(IS_RANGE_V_INTERAPTIV_EVENT(raw_id)))
1807 raw_event.range = V;
1808 else
1809 raw_event.range = T;
1810 #endif
1811 break;
1812 case CPU_BMIPS5000:
1813 if (IS_BOTH_COUNTERS_BMIPS5000_EVENT(base_id))
1814 raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
1815 else
1816 raw_event.cntr_mask =
1817 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1818 break;
1819 case CPU_LOONGSON64:
1820 pmu_type = get_loongson3_pmu_type();
1821
1822 switch (pmu_type) {
1823 case LOONGSON_PMU_TYPE1:
1824 raw_event.cntr_mask =
1825 raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
1826 break;
1827 case LOONGSON_PMU_TYPE2:
1828 base_id = config & 0x3ff;
1829 raw_event.cntr_mask = CNTR_ALL;
1830
1831 if ((base_id >= 1 && base_id < 28) ||
1832 (base_id >= 64 && base_id < 90) ||
1833 (base_id >= 128 && base_id < 164) ||
1834 (base_id >= 192 && base_id < 200) ||
1835 (base_id >= 256 && base_id < 275) ||
1836 (base_id >= 320 && base_id < 361) ||
1837 (base_id >= 384 && base_id < 574))
1838 break;
1839
1840 return ERR_PTR(-EOPNOTSUPP);
1841 case LOONGSON_PMU_TYPE3:
1842 base_id = raw_id;
1843 raw_event.cntr_mask = CNTR_ALL;
1844 break;
1845 }
1846 break;
1847 }
1848
1849 raw_event.event_id = base_id;
1850
1851 return &raw_event;
1852 }
1853
octeon_pmu_map_raw_event(u64 config)1854 static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
1855 {
1856 unsigned int base_id = config & 0x7f;
1857 unsigned int event_max;
1858
1859
1860 raw_event.cntr_mask = CNTR_ALL;
1861 raw_event.event_id = base_id;
1862
1863 if (current_cpu_type() == CPU_CAVIUM_OCTEON3)
1864 event_max = 0x5f;
1865 else if (current_cpu_type() == CPU_CAVIUM_OCTEON2)
1866 event_max = 0x42;
1867 else
1868 event_max = 0x3a;
1869
1870 if (base_id > event_max) {
1871 return ERR_PTR(-EOPNOTSUPP);
1872 }
1873
1874 switch (base_id) {
1875 case 0x00:
1876 case 0x0f:
1877 case 0x1e:
1878 case 0x1f:
1879 case 0x2f:
1880 case 0x34:
1881 case 0x3e ... 0x3f:
1882 return ERR_PTR(-EOPNOTSUPP);
1883 default:
1884 break;
1885 }
1886
1887 return &raw_event;
1888 }
1889
1890 static int __init
init_hw_perf_events(void)1891 init_hw_perf_events(void)
1892 {
1893 int counters, irq, pmu_type;
1894
1895 pr_info("Performance counters: ");
1896
1897 counters = n_counters();
1898 if (counters == 0) {
1899 pr_cont("No available PMU.\n");
1900 return -ENODEV;
1901 }
1902
1903 #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
1904 if (!cpu_has_mipsmt_pertccounters)
1905 counters = counters_total_to_per_cpu(counters);
1906 #endif
1907
1908 if (get_c0_perfcount_int)
1909 irq = get_c0_perfcount_int();
1910 else if (cp0_perfcount_irq >= 0)
1911 irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
1912 else
1913 irq = -1;
1914
1915 mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
1916
1917 switch (current_cpu_type()) {
1918 case CPU_24K:
1919 mipspmu.name = "mips/24K";
1920 mipspmu.general_event_map = &mipsxxcore_event_map;
1921 mipspmu.cache_event_map = &mipsxxcore_cache_map;
1922 break;
1923 case CPU_34K:
1924 mipspmu.name = "mips/34K";
1925 mipspmu.general_event_map = &mipsxxcore_event_map;
1926 mipspmu.cache_event_map = &mipsxxcore_cache_map;
1927 break;
1928 case CPU_74K:
1929 mipspmu.name = "mips/74K";
1930 mipspmu.general_event_map = &mipsxxcore_event_map2;
1931 mipspmu.cache_event_map = &mipsxxcore_cache_map2;
1932 break;
1933 case CPU_PROAPTIV:
1934 mipspmu.name = "mips/proAptiv";
1935 mipspmu.general_event_map = &mipsxxcore_event_map2;
1936 mipspmu.cache_event_map = &mipsxxcore_cache_map2;
1937 break;
1938 case CPU_P5600:
1939 mipspmu.name = "mips/P5600";
1940 mipspmu.general_event_map = &mipsxxcore_event_map2;
1941 mipspmu.cache_event_map = &mipsxxcore_cache_map2;
1942 break;
1943 case CPU_P6600:
1944 mipspmu.name = "mips/P6600";
1945 mipspmu.general_event_map = &mipsxxcore_event_map2;
1946 mipspmu.cache_event_map = &mipsxxcore_cache_map2;
1947 break;
1948 case CPU_I6400:
1949 mipspmu.name = "mips/I6400";
1950 mipspmu.general_event_map = &i6x00_event_map;
1951 mipspmu.cache_event_map = &i6x00_cache_map;
1952 break;
1953 case CPU_I6500:
1954 mipspmu.name = "mips/I6500";
1955 mipspmu.general_event_map = &i6x00_event_map;
1956 mipspmu.cache_event_map = &i6x00_cache_map;
1957 break;
1958 case CPU_1004K:
1959 mipspmu.name = "mips/1004K";
1960 mipspmu.general_event_map = &mipsxxcore_event_map;
1961 mipspmu.cache_event_map = &mipsxxcore_cache_map;
1962 break;
1963 case CPU_1074K:
1964 mipspmu.name = "mips/1074K";
1965 mipspmu.general_event_map = &mipsxxcore_event_map;
1966 mipspmu.cache_event_map = &mipsxxcore_cache_map;
1967 break;
1968 case CPU_INTERAPTIV:
1969 mipspmu.name = "mips/interAptiv";
1970 mipspmu.general_event_map = &mipsxxcore_event_map;
1971 mipspmu.cache_event_map = &mipsxxcore_cache_map;
1972 break;
1973 case CPU_LOONGSON32:
1974 mipspmu.name = "mips/loongson1";
1975 mipspmu.general_event_map = &mipsxxcore_event_map;
1976 mipspmu.cache_event_map = &mipsxxcore_cache_map;
1977 break;
1978 case CPU_LOONGSON64:
1979 mipspmu.name = "mips/loongson3";
1980 pmu_type = get_loongson3_pmu_type();
1981
1982 switch (pmu_type) {
1983 case LOONGSON_PMU_TYPE1:
1984 counters = 2;
1985 mipspmu.general_event_map = &loongson3_event_map1;
1986 mipspmu.cache_event_map = &loongson3_cache_map1;
1987 break;
1988 case LOONGSON_PMU_TYPE2:
1989 counters = 4;
1990 mipspmu.general_event_map = &loongson3_event_map2;
1991 mipspmu.cache_event_map = &loongson3_cache_map2;
1992 break;
1993 case LOONGSON_PMU_TYPE3:
1994 counters = 4;
1995 mipspmu.general_event_map = &loongson3_event_map3;
1996 mipspmu.cache_event_map = &loongson3_cache_map3;
1997 break;
1998 }
1999 break;
2000 case CPU_CAVIUM_OCTEON:
2001 case CPU_CAVIUM_OCTEON_PLUS:
2002 case CPU_CAVIUM_OCTEON2:
2003 case CPU_CAVIUM_OCTEON3:
2004 mipspmu.name = "octeon";
2005 mipspmu.general_event_map = &octeon_event_map;
2006 mipspmu.cache_event_map = &octeon_cache_map;
2007 mipspmu.map_raw_event = octeon_pmu_map_raw_event;
2008 break;
2009 case CPU_BMIPS5000:
2010 mipspmu.name = "BMIPS5000";
2011 mipspmu.general_event_map = &bmips5000_event_map;
2012 mipspmu.cache_event_map = &bmips5000_cache_map;
2013 break;
2014 default:
2015 pr_cont("Either hardware does not support performance "
2016 "counters, or not yet implemented.\n");
2017 return -ENODEV;
2018 }
2019
2020 mipspmu.num_counters = counters;
2021 mipspmu.irq = irq;
2022
2023 if (read_c0_perfctrl0() & MIPS_PERFCTRL_W) {
2024 if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) {
2025 counter_bits = 48;
2026 mipspmu.max_period = (1ULL << 47) - 1;
2027 mipspmu.valid_count = (1ULL << 47) - 1;
2028 mipspmu.overflow = 1ULL << 47;
2029 } else {
2030 counter_bits = 64;
2031 mipspmu.max_period = (1ULL << 63) - 1;
2032 mipspmu.valid_count = (1ULL << 63) - 1;
2033 mipspmu.overflow = 1ULL << 63;
2034 }
2035 mipspmu.read_counter = mipsxx_pmu_read_counter_64;
2036 mipspmu.write_counter = mipsxx_pmu_write_counter_64;
2037 } else {
2038 counter_bits = 32;
2039 mipspmu.max_period = (1ULL << 31) - 1;
2040 mipspmu.valid_count = (1ULL << 31) - 1;
2041 mipspmu.overflow = 1ULL << 31;
2042 mipspmu.read_counter = mipsxx_pmu_read_counter;
2043 mipspmu.write_counter = mipsxx_pmu_write_counter;
2044 }
2045
2046 on_each_cpu(reset_counters, (void *)(long)counters, 1);
2047
2048 pr_cont("%s PMU enabled, %d %d-bit counters available to each "
2049 "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq,
2050 irq < 0 ? " (share with timer interrupt)" : "");
2051
2052 perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
2053
2054 return 0;
2055 }
2056 early_initcall(init_hw_perf_events);
2057
