1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Linaro Limited 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/clock/qcom,gcc-sm8450.h> 8#include <dt-bindings/clock/qcom,rpmh.h> 9#include <dt-bindings/clock/qcom,sm8450-camcc.h> 10#include <dt-bindings/clock/qcom,sm8450-dispcc.h> 11#include <dt-bindings/clock/qcom,sm8450-videocc.h> 12#include <dt-bindings/dma/qcom-gpi.h> 13#include <dt-bindings/gpio/gpio.h> 14#include <dt-bindings/mailbox/qcom-ipcc.h> 15#include <dt-bindings/phy/phy-qcom-qmp.h> 16#include <dt-bindings/power/qcom,rpmhpd.h> 17#include <dt-bindings/power/qcom-rpmpd.h> 18#include <dt-bindings/interconnect/qcom,icc.h> 19#include <dt-bindings/interconnect/qcom,sm8450.h> 20#include <dt-bindings/soc/qcom,gpr.h> 21#include <dt-bindings/soc/qcom,rpmh-rsc.h> 22#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> 23#include <dt-bindings/thermal/thermal.h> 24 25/ { 26 interrupt-parent = <&intc>; 27 28 #address-cells = <2>; 29 #size-cells = <2>; 30 31 chosen { }; 32 33 clocks { 34 xo_board: xo-board { 35 compatible = "fixed-clock"; 36 #clock-cells = <0>; 37 clock-frequency = <76800000>; 38 }; 39 40 sleep_clk: sleep-clk { 41 compatible = "fixed-clock"; 42 #clock-cells = <0>; 43 clock-frequency = <32000>; 44 }; 45 }; 46 47 cpus { 48 #address-cells = <2>; 49 #size-cells = <0>; 50 51 CPU0: cpu@0 { 52 device_type = "cpu"; 53 compatible = "qcom,kryo780"; 54 reg = <0x0 0x0>; 55 enable-method = "psci"; 56 next-level-cache = <&L2_0>; 57 power-domains = <&CPU_PD0>; 58 power-domain-names = "psci"; 59 qcom,freq-domain = <&cpufreq_hw 0>; 60 #cooling-cells = <2>; 61 clocks = <&cpufreq_hw 0>; 62 L2_0: l2-cache { 63 compatible = "cache"; 64 cache-level = <2>; 65 cache-unified; 66 next-level-cache = <&L3_0>; 67 L3_0: l3-cache { 68 compatible = "cache"; 69 cache-level = <3>; 70 cache-unified; 71 }; 72 }; 73 }; 74 75 CPU1: cpu@100 { 76 device_type = "cpu"; 77 compatible = "qcom,kryo780"; 78 reg = <0x0 0x100>; 79 enable-method = "psci"; 80 next-level-cache = <&L2_100>; 81 power-domains = <&CPU_PD1>; 82 power-domain-names = "psci"; 83 qcom,freq-domain = <&cpufreq_hw 0>; 84 #cooling-cells = <2>; 85 clocks = <&cpufreq_hw 0>; 86 L2_100: l2-cache { 87 compatible = "cache"; 88 cache-level = <2>; 89 cache-unified; 90 next-level-cache = <&L3_0>; 91 }; 92 }; 93 94 CPU2: cpu@200 { 95 device_type = "cpu"; 96 compatible = "qcom,kryo780"; 97 reg = <0x0 0x200>; 98 enable-method = "psci"; 99 next-level-cache = <&L2_200>; 100 power-domains = <&CPU_PD2>; 101 power-domain-names = "psci"; 102 qcom,freq-domain = <&cpufreq_hw 0>; 103 #cooling-cells = <2>; 104 clocks = <&cpufreq_hw 0>; 105 L2_200: l2-cache { 106 compatible = "cache"; 107 cache-level = <2>; 108 cache-unified; 109 next-level-cache = <&L3_0>; 110 }; 111 }; 112 113 CPU3: cpu@300 { 114 device_type = "cpu"; 115 compatible = "qcom,kryo780"; 116 reg = <0x0 0x300>; 117 enable-method = "psci"; 118 next-level-cache = <&L2_300>; 119 power-domains = <&CPU_PD3>; 120 power-domain-names = "psci"; 121 qcom,freq-domain = <&cpufreq_hw 0>; 122 #cooling-cells = <2>; 123 clocks = <&cpufreq_hw 0>; 124 L2_300: l2-cache { 125 compatible = "cache"; 126 cache-level = <2>; 127 cache-unified; 128 next-level-cache = <&L3_0>; 129 }; 130 }; 131 132 CPU4: cpu@400 { 133 device_type = "cpu"; 134 compatible = "qcom,kryo780"; 135 reg = <0x0 0x400>; 136 enable-method = "psci"; 137 next-level-cache = <&L2_400>; 138 power-domains = <&CPU_PD4>; 139 power-domain-names = "psci"; 140 qcom,freq-domain = <&cpufreq_hw 1>; 141 #cooling-cells = <2>; 142 clocks = <&cpufreq_hw 1>; 143 L2_400: l2-cache { 144 compatible = "cache"; 145 cache-level = <2>; 146 cache-unified; 147 next-level-cache = <&L3_0>; 148 }; 149 }; 150 151 CPU5: cpu@500 { 152 device_type = "cpu"; 153 compatible = "qcom,kryo780"; 154 reg = <0x0 0x500>; 155 enable-method = "psci"; 156 next-level-cache = <&L2_500>; 157 power-domains = <&CPU_PD5>; 158 power-domain-names = "psci"; 159 qcom,freq-domain = <&cpufreq_hw 1>; 160 #cooling-cells = <2>; 161 clocks = <&cpufreq_hw 1>; 162 L2_500: l2-cache { 163 compatible = "cache"; 164 cache-level = <2>; 165 cache-unified; 166 next-level-cache = <&L3_0>; 167 }; 168 }; 169 170 CPU6: cpu@600 { 171 device_type = "cpu"; 172 compatible = "qcom,kryo780"; 173 reg = <0x0 0x600>; 174 enable-method = "psci"; 175 next-level-cache = <&L2_600>; 176 power-domains = <&CPU_PD6>; 177 power-domain-names = "psci"; 178 qcom,freq-domain = <&cpufreq_hw 1>; 179 #cooling-cells = <2>; 180 clocks = <&cpufreq_hw 1>; 181 L2_600: l2-cache { 182 compatible = "cache"; 183 cache-level = <2>; 184 cache-unified; 185 next-level-cache = <&L3_0>; 186 }; 187 }; 188 189 CPU7: cpu@700 { 190 device_type = "cpu"; 191 compatible = "qcom,kryo780"; 192 reg = <0x0 0x700>; 193 enable-method = "psci"; 194 next-level-cache = <&L2_700>; 195 power-domains = <&CPU_PD7>; 196 power-domain-names = "psci"; 197 qcom,freq-domain = <&cpufreq_hw 2>; 198 #cooling-cells = <2>; 199 clocks = <&cpufreq_hw 2>; 200 L2_700: l2-cache { 201 compatible = "cache"; 202 cache-level = <2>; 203 cache-unified; 204 next-level-cache = <&L3_0>; 205 }; 206 }; 207 208 cpu-map { 209 cluster0 { 210 core0 { 211 cpu = <&CPU0>; 212 }; 213 214 core1 { 215 cpu = <&CPU1>; 216 }; 217 218 core2 { 219 cpu = <&CPU2>; 220 }; 221 222 core3 { 223 cpu = <&CPU3>; 224 }; 225 226 core4 { 227 cpu = <&CPU4>; 228 }; 229 230 core5 { 231 cpu = <&CPU5>; 232 }; 233 234 core6 { 235 cpu = <&CPU6>; 236 }; 237 238 core7 { 239 cpu = <&CPU7>; 240 }; 241 }; 242 }; 243 244 idle-states { 245 entry-method = "psci"; 246 247 LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { 248 compatible = "arm,idle-state"; 249 idle-state-name = "silver-rail-power-collapse"; 250 arm,psci-suspend-param = <0x40000004>; 251 entry-latency-us = <800>; 252 exit-latency-us = <750>; 253 min-residency-us = <4090>; 254 local-timer-stop; 255 }; 256 257 BIG_CPU_SLEEP_0: cpu-sleep-1-0 { 258 compatible = "arm,idle-state"; 259 idle-state-name = "gold-rail-power-collapse"; 260 arm,psci-suspend-param = <0x40000004>; 261 entry-latency-us = <600>; 262 exit-latency-us = <1550>; 263 min-residency-us = <4791>; 264 local-timer-stop; 265 }; 266 }; 267 268 domain-idle-states { 269 CLUSTER_SLEEP_0: cluster-sleep-0 { 270 compatible = "domain-idle-state"; 271 arm,psci-suspend-param = <0x41000044>; 272 entry-latency-us = <1050>; 273 exit-latency-us = <2500>; 274 min-residency-us = <5309>; 275 }; 276 277 CLUSTER_SLEEP_1: cluster-sleep-1 { 278 compatible = "domain-idle-state"; 279 arm,psci-suspend-param = <0x4100c344>; 280 entry-latency-us = <2700>; 281 exit-latency-us = <3500>; 282 min-residency-us = <13959>; 283 }; 284 }; 285 }; 286 287 firmware { 288 scm: scm { 289 compatible = "qcom,scm-sm8450", "qcom,scm"; 290 qcom,dload-mode = <&tcsr 0x13000>; 291 interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; 292 #reset-cells = <1>; 293 }; 294 }; 295 296 clk_virt: interconnect-0 { 297 compatible = "qcom,sm8450-clk-virt"; 298 #interconnect-cells = <2>; 299 qcom,bcm-voters = <&apps_bcm_voter>; 300 }; 301 302 mc_virt: interconnect-1 { 303 compatible = "qcom,sm8450-mc-virt"; 304 #interconnect-cells = <2>; 305 qcom,bcm-voters = <&apps_bcm_voter>; 306 }; 307 308 memory@a0000000 { 309 device_type = "memory"; 310 /* We expect the bootloader to fill in the size */ 311 reg = <0x0 0xa0000000 0x0 0x0>; 312 }; 313 314 pmu { 315 compatible = "arm,armv8-pmuv3"; 316 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 317 }; 318 319 psci { 320 compatible = "arm,psci-1.0"; 321 method = "smc"; 322 323 CPU_PD0: power-domain-cpu0 { 324 #power-domain-cells = <0>; 325 power-domains = <&CLUSTER_PD>; 326 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 327 }; 328 329 CPU_PD1: power-domain-cpu1 { 330 #power-domain-cells = <0>; 331 power-domains = <&CLUSTER_PD>; 332 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 333 }; 334 335 CPU_PD2: power-domain-cpu2 { 336 #power-domain-cells = <0>; 337 power-domains = <&CLUSTER_PD>; 338 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 339 }; 340 341 CPU_PD3: power-domain-cpu3 { 342 #power-domain-cells = <0>; 343 power-domains = <&CLUSTER_PD>; 344 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 345 }; 346 347 CPU_PD4: power-domain-cpu4 { 348 #power-domain-cells = <0>; 349 power-domains = <&CLUSTER_PD>; 350 domain-idle-states = <&BIG_CPU_SLEEP_0>; 351 }; 352 353 CPU_PD5: power-domain-cpu5 { 354 #power-domain-cells = <0>; 355 power-domains = <&CLUSTER_PD>; 356 domain-idle-states = <&BIG_CPU_SLEEP_0>; 357 }; 358 359 CPU_PD6: power-domain-cpu6 { 360 #power-domain-cells = <0>; 361 power-domains = <&CLUSTER_PD>; 362 domain-idle-states = <&BIG_CPU_SLEEP_0>; 363 }; 364 365 CPU_PD7: power-domain-cpu7 { 366 #power-domain-cells = <0>; 367 power-domains = <&CLUSTER_PD>; 368 domain-idle-states = <&BIG_CPU_SLEEP_0>; 369 }; 370 371 CLUSTER_PD: power-domain-cpu-cluster0 { 372 #power-domain-cells = <0>; 373 domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; 374 }; 375 }; 376 377 qup_opp_table_100mhz: opp-table-qup { 378 compatible = "operating-points-v2"; 379 380 opp-50000000 { 381 opp-hz = /bits/ 64 <50000000>; 382 required-opps = <&rpmhpd_opp_min_svs>; 383 }; 384 385 opp-75000000 { 386 opp-hz = /bits/ 64 <75000000>; 387 required-opps = <&rpmhpd_opp_low_svs>; 388 }; 389 390 opp-100000000 { 391 opp-hz = /bits/ 64 <100000000>; 392 required-opps = <&rpmhpd_opp_svs>; 393 }; 394 }; 395 396 reserved_memory: reserved-memory { 397 #address-cells = <2>; 398 #size-cells = <2>; 399 ranges; 400 401 hyp_mem: memory@80000000 { 402 reg = <0x0 0x80000000 0x0 0x600000>; 403 no-map; 404 }; 405 406 xbl_dt_log_mem: memory@80600000 { 407 reg = <0x0 0x80600000 0x0 0x40000>; 408 no-map; 409 }; 410 411 xbl_ramdump_mem: memory@80640000 { 412 reg = <0x0 0x80640000 0x0 0x180000>; 413 no-map; 414 }; 415 416 xbl_sc_mem: memory@807c0000 { 417 reg = <0x0 0x807c0000 0x0 0x40000>; 418 no-map; 419 }; 420 421 aop_image_mem: memory@80800000 { 422 reg = <0x0 0x80800000 0x0 0x60000>; 423 no-map; 424 }; 425 426 aop_cmd_db_mem: memory@80860000 { 427 compatible = "qcom,cmd-db"; 428 reg = <0x0 0x80860000 0x0 0x20000>; 429 no-map; 430 }; 431 432 aop_config_mem: memory@80880000 { 433 reg = <0x0 0x80880000 0x0 0x20000>; 434 no-map; 435 }; 436 437 tme_crash_dump_mem: memory@808a0000 { 438 reg = <0x0 0x808a0000 0x0 0x40000>; 439 no-map; 440 }; 441 442 tme_log_mem: memory@808e0000 { 443 reg = <0x0 0x808e0000 0x0 0x4000>; 444 no-map; 445 }; 446 447 uefi_log_mem: memory@808e4000 { 448 reg = <0x0 0x808e4000 0x0 0x10000>; 449 no-map; 450 }; 451 452 /* secdata region can be reused by apps */ 453 smem: memory@80900000 { 454 compatible = "qcom,smem"; 455 reg = <0x0 0x80900000 0x0 0x200000>; 456 hwlocks = <&tcsr_mutex 3>; 457 no-map; 458 }; 459 460 cpucp_fw_mem: memory@80b00000 { 461 reg = <0x0 0x80b00000 0x0 0x100000>; 462 no-map; 463 }; 464 465 cdsp_secure_heap: memory@80c00000 { 466 reg = <0x0 0x80c00000 0x0 0x4600000>; 467 no-map; 468 }; 469 470 video_mem: memory@85700000 { 471 reg = <0x0 0x85700000 0x0 0x700000>; 472 no-map; 473 }; 474 475 adsp_mem: memory@85e00000 { 476 reg = <0x0 0x85e00000 0x0 0x2100000>; 477 no-map; 478 }; 479 480 slpi_mem: memory@88000000 { 481 reg = <0x0 0x88000000 0x0 0x1900000>; 482 no-map; 483 }; 484 485 cdsp_mem: memory@89900000 { 486 reg = <0x0 0x89900000 0x0 0x2000000>; 487 no-map; 488 }; 489 490 ipa_fw_mem: memory@8b900000 { 491 reg = <0x0 0x8b900000 0x0 0x10000>; 492 no-map; 493 }; 494 495 ipa_gsi_mem: memory@8b910000 { 496 reg = <0x0 0x8b910000 0x0 0xa000>; 497 no-map; 498 }; 499 500 gpu_micro_code_mem: memory@8b91a000 { 501 reg = <0x0 0x8b91a000 0x0 0x2000>; 502 no-map; 503 }; 504 505 spss_region_mem: memory@8ba00000 { 506 reg = <0x0 0x8ba00000 0x0 0x180000>; 507 no-map; 508 }; 509 510 /* First part of the "SPU secure shared memory" region */ 511 spu_tz_shared_mem: memory@8bb80000 { 512 reg = <0x0 0x8bb80000 0x0 0x60000>; 513 no-map; 514 }; 515 516 /* Second part of the "SPU secure shared memory" region */ 517 spu_modem_shared_mem: memory@8bbe0000 { 518 reg = <0x0 0x8bbe0000 0x0 0x20000>; 519 no-map; 520 }; 521 522 mpss_mem: memory@8bc00000 { 523 reg = <0x0 0x8bc00000 0x0 0x13200000>; 524 no-map; 525 }; 526 527 cvp_mem: memory@9ee00000 { 528 reg = <0x0 0x9ee00000 0x0 0x700000>; 529 no-map; 530 }; 531 532 camera_mem: memory@9f500000 { 533 reg = <0x0 0x9f500000 0x0 0x800000>; 534 no-map; 535 }; 536 537 rmtfs_mem: memory@9fd00000 { 538 compatible = "qcom,rmtfs-mem"; 539 reg = <0x0 0x9fd00000 0x0 0x280000>; 540 no-map; 541 542 qcom,client-id = <1>; 543 qcom,vmid = <15>; 544 }; 545 546 xbl_sc_mem2: memory@a6e00000 { 547 reg = <0x0 0xa6e00000 0x0 0x40000>; 548 no-map; 549 }; 550 551 global_sync_mem: memory@a6f00000 { 552 reg = <0x0 0xa6f00000 0x0 0x100000>; 553 no-map; 554 }; 555 556 /* uefi region can be reused by APPS */ 557 558 /* Linux kernel image is loaded at 0xa0000000 */ 559 560 oem_vm_mem: memory@bb000000 { 561 reg = <0x0 0xbb000000 0x0 0x5000000>; 562 no-map; 563 }; 564 565 mte_mem: memory@c0000000 { 566 reg = <0x0 0xc0000000 0x0 0x20000000>; 567 no-map; 568 }; 569 570 qheebsp_reserved_mem: memory@e0000000 { 571 reg = <0x0 0xe0000000 0x0 0x600000>; 572 no-map; 573 }; 574 575 cpusys_vm_mem: memory@e0600000 { 576 reg = <0x0 0xe0600000 0x0 0x400000>; 577 no-map; 578 }; 579 580 hyp_reserved_mem: memory@e0a00000 { 581 reg = <0x0 0xe0a00000 0x0 0x100000>; 582 no-map; 583 }; 584 585 trust_ui_vm_mem: memory@e0b00000 { 586 reg = <0x0 0xe0b00000 0x0 0x4af3000>; 587 no-map; 588 }; 589 590 trust_ui_vm_qrtr: memory@e55f3000 { 591 reg = <0x0 0xe55f3000 0x0 0x9000>; 592 no-map; 593 }; 594 595 trust_ui_vm_vblk0_ring: memory@e55fc000 { 596 reg = <0x0 0xe55fc000 0x0 0x4000>; 597 no-map; 598 }; 599 600 trust_ui_vm_swiotlb: memory@e5600000 { 601 reg = <0x0 0xe5600000 0x0 0x100000>; 602 no-map; 603 }; 604 605 tz_stat_mem: memory@e8800000 { 606 reg = <0x0 0xe8800000 0x0 0x100000>; 607 no-map; 608 }; 609 610 tags_mem: memory@e8900000 { 611 reg = <0x0 0xe8900000 0x0 0x1200000>; 612 no-map; 613 }; 614 615 qtee_mem: memory@e9b00000 { 616 reg = <0x0 0xe9b00000 0x0 0x500000>; 617 no-map; 618 }; 619 620 trusted_apps_mem: memory@ea000000 { 621 reg = <0x0 0xea000000 0x0 0x3900000>; 622 no-map; 623 }; 624 625 trusted_apps_ext_mem: memory@ed900000 { 626 reg = <0x0 0xed900000 0x0 0x3b00000>; 627 no-map; 628 }; 629 }; 630 631 smp2p-adsp { 632 compatible = "qcom,smp2p"; 633 qcom,smem = <443>, <429>; 634 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 635 IPCC_MPROC_SIGNAL_SMP2P 636 IRQ_TYPE_EDGE_RISING>; 637 mboxes = <&ipcc IPCC_CLIENT_LPASS 638 IPCC_MPROC_SIGNAL_SMP2P>; 639 640 qcom,local-pid = <0>; 641 qcom,remote-pid = <2>; 642 643 smp2p_adsp_out: master-kernel { 644 qcom,entry-name = "master-kernel"; 645 #qcom,smem-state-cells = <1>; 646 }; 647 648 smp2p_adsp_in: slave-kernel { 649 qcom,entry-name = "slave-kernel"; 650 interrupt-controller; 651 #interrupt-cells = <2>; 652 }; 653 }; 654 655 smp2p-cdsp { 656 compatible = "qcom,smp2p"; 657 qcom,smem = <94>, <432>; 658 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP 659 IPCC_MPROC_SIGNAL_SMP2P 660 IRQ_TYPE_EDGE_RISING>; 661 mboxes = <&ipcc IPCC_CLIENT_CDSP 662 IPCC_MPROC_SIGNAL_SMP2P>; 663 664 qcom,local-pid = <0>; 665 qcom,remote-pid = <5>; 666 667 smp2p_cdsp_out: master-kernel { 668 qcom,entry-name = "master-kernel"; 669 #qcom,smem-state-cells = <1>; 670 }; 671 672 smp2p_cdsp_in: slave-kernel { 673 qcom,entry-name = "slave-kernel"; 674 interrupt-controller; 675 #interrupt-cells = <2>; 676 }; 677 }; 678 679 smp2p-modem { 680 compatible = "qcom,smp2p"; 681 qcom,smem = <435>, <428>; 682 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS 683 IPCC_MPROC_SIGNAL_SMP2P 684 IRQ_TYPE_EDGE_RISING>; 685 mboxes = <&ipcc IPCC_CLIENT_MPSS 686 IPCC_MPROC_SIGNAL_SMP2P>; 687 688 qcom,local-pid = <0>; 689 qcom,remote-pid = <1>; 690 691 smp2p_modem_out: master-kernel { 692 qcom,entry-name = "master-kernel"; 693 #qcom,smem-state-cells = <1>; 694 }; 695 696 smp2p_modem_in: slave-kernel { 697 qcom,entry-name = "slave-kernel"; 698 interrupt-controller; 699 #interrupt-cells = <2>; 700 }; 701 702 ipa_smp2p_out: ipa-ap-to-modem { 703 qcom,entry-name = "ipa"; 704 #qcom,smem-state-cells = <1>; 705 }; 706 707 ipa_smp2p_in: ipa-modem-to-ap { 708 qcom,entry-name = "ipa"; 709 interrupt-controller; 710 #interrupt-cells = <2>; 711 }; 712 }; 713 714 smp2p-slpi { 715 compatible = "qcom,smp2p"; 716 qcom,smem = <481>, <430>; 717 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI 718 IPCC_MPROC_SIGNAL_SMP2P 719 IRQ_TYPE_EDGE_RISING>; 720 mboxes = <&ipcc IPCC_CLIENT_SLPI 721 IPCC_MPROC_SIGNAL_SMP2P>; 722 723 qcom,local-pid = <0>; 724 qcom,remote-pid = <3>; 725 726 smp2p_slpi_out: master-kernel { 727 qcom,entry-name = "master-kernel"; 728 #qcom,smem-state-cells = <1>; 729 }; 730 731 smp2p_slpi_in: slave-kernel { 732 qcom,entry-name = "slave-kernel"; 733 interrupt-controller; 734 #interrupt-cells = <2>; 735 }; 736 }; 737 738 soc: soc@0 { 739 #address-cells = <2>; 740 #size-cells = <2>; 741 ranges = <0 0 0 0 0x10 0>; 742 dma-ranges = <0 0 0 0 0x10 0>; 743 compatible = "simple-bus"; 744 745 gcc: clock-controller@100000 { 746 compatible = "qcom,gcc-sm8450"; 747 reg = <0x0 0x00100000 0x0 0x1f4200>; 748 #clock-cells = <1>; 749 #reset-cells = <1>; 750 #power-domain-cells = <1>; 751 clocks = <&rpmhcc RPMH_CXO_CLK>, 752 <&sleep_clk>, 753 <&pcie0_lane>, 754 <&pcie1_lane>, 755 <0>, 756 <&ufs_mem_phy_lanes 0>, 757 <&ufs_mem_phy_lanes 1>, 758 <&ufs_mem_phy_lanes 2>, 759 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; 760 clock-names = "bi_tcxo", 761 "sleep_clk", 762 "pcie_0_pipe_clk", 763 "pcie_1_pipe_clk", 764 "pcie_1_phy_aux_clk", 765 "ufs_phy_rx_symbol_0_clk", 766 "ufs_phy_rx_symbol_1_clk", 767 "ufs_phy_tx_symbol_0_clk", 768 "usb3_phy_wrapper_gcc_usb30_pipe_clk"; 769 }; 770 771 gpi_dma2: dma-controller@800000 { 772 compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; 773 #dma-cells = <3>; 774 reg = <0 0x00800000 0 0x60000>; 775 interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, 776 <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, 777 <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, 778 <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, 779 <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, 780 <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, 781 <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, 782 <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, 783 <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, 784 <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, 785 <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, 786 <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; 787 dma-channels = <12>; 788 dma-channel-mask = <0x7e>; 789 iommus = <&apps_smmu 0x496 0x0>; 790 status = "disabled"; 791 }; 792 793 qupv3_id_2: geniqup@8c0000 { 794 compatible = "qcom,geni-se-qup"; 795 reg = <0x0 0x008c0000 0x0 0x2000>; 796 clock-names = "m-ahb", "s-ahb"; 797 clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, 798 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; 799 iommus = <&apps_smmu 0x483 0x0>; 800 #address-cells = <2>; 801 #size-cells = <2>; 802 ranges; 803 status = "disabled"; 804 805 i2c15: i2c@880000 { 806 compatible = "qcom,geni-i2c"; 807 reg = <0x0 0x00880000 0x0 0x4000>; 808 clock-names = "se"; 809 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; 810 pinctrl-names = "default"; 811 pinctrl-0 = <&qup_i2c15_data_clk>; 812 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; 813 #address-cells = <1>; 814 #size-cells = <0>; 815 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 816 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 817 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 818 interconnect-names = "qup-core", "qup-config", "qup-memory"; 819 dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, 820 <&gpi_dma2 1 0 QCOM_GPI_I2C>; 821 dma-names = "tx", "rx"; 822 status = "disabled"; 823 }; 824 825 spi15: spi@880000 { 826 compatible = "qcom,geni-spi"; 827 reg = <0x0 0x00880000 0x0 0x4000>; 828 clock-names = "se"; 829 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; 830 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; 831 pinctrl-names = "default"; 832 pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; 833 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 834 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 835 interconnect-names = "qup-core", "qup-config"; 836 dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, 837 <&gpi_dma2 1 0 QCOM_GPI_SPI>; 838 dma-names = "tx", "rx"; 839 #address-cells = <1>; 840 #size-cells = <0>; 841 status = "disabled"; 842 }; 843 844 i2c16: i2c@884000 { 845 compatible = "qcom,geni-i2c"; 846 reg = <0x0 0x00884000 0x0 0x4000>; 847 clock-names = "se"; 848 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; 849 pinctrl-names = "default"; 850 pinctrl-0 = <&qup_i2c16_data_clk>; 851 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; 852 #address-cells = <1>; 853 #size-cells = <0>; 854 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 855 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 856 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 857 interconnect-names = "qup-core", "qup-config", "qup-memory"; 858 dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, 859 <&gpi_dma2 1 1 QCOM_GPI_I2C>; 860 dma-names = "tx", "rx"; 861 status = "disabled"; 862 }; 863 864 spi16: spi@884000 { 865 compatible = "qcom,geni-spi"; 866 reg = <0x0 0x00884000 0x0 0x4000>; 867 clock-names = "se"; 868 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; 869 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; 870 pinctrl-names = "default"; 871 pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; 872 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 873 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 874 interconnect-names = "qup-core", "qup-config"; 875 dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, 876 <&gpi_dma2 1 1 QCOM_GPI_SPI>; 877 dma-names = "tx", "rx"; 878 #address-cells = <1>; 879 #size-cells = <0>; 880 status = "disabled"; 881 }; 882 883 i2c17: i2c@888000 { 884 compatible = "qcom,geni-i2c"; 885 reg = <0x0 0x00888000 0x0 0x4000>; 886 clock-names = "se"; 887 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; 888 pinctrl-names = "default"; 889 pinctrl-0 = <&qup_i2c17_data_clk>; 890 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; 891 #address-cells = <1>; 892 #size-cells = <0>; 893 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 894 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 895 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 896 interconnect-names = "qup-core", "qup-config", "qup-memory"; 897 dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, 898 <&gpi_dma2 1 2 QCOM_GPI_I2C>; 899 dma-names = "tx", "rx"; 900 status = "disabled"; 901 }; 902 903 spi17: spi@888000 { 904 compatible = "qcom,geni-spi"; 905 reg = <0x0 0x00888000 0x0 0x4000>; 906 clock-names = "se"; 907 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; 908 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; 909 pinctrl-names = "default"; 910 pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; 911 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 912 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 913 interconnect-names = "qup-core", "qup-config"; 914 dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, 915 <&gpi_dma2 1 2 QCOM_GPI_SPI>; 916 dma-names = "tx", "rx"; 917 #address-cells = <1>; 918 #size-cells = <0>; 919 status = "disabled"; 920 }; 921 922 i2c18: i2c@88c000 { 923 compatible = "qcom,geni-i2c"; 924 reg = <0x0 0x0088c000 0x0 0x4000>; 925 clock-names = "se"; 926 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; 927 pinctrl-names = "default"; 928 pinctrl-0 = <&qup_i2c18_data_clk>; 929 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; 930 #address-cells = <1>; 931 #size-cells = <0>; 932 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 933 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 934 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 935 interconnect-names = "qup-core", "qup-config", "qup-memory"; 936 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, 937 <&gpi_dma2 1 3 QCOM_GPI_I2C>; 938 dma-names = "tx", "rx"; 939 status = "disabled"; 940 }; 941 942 spi18: spi@88c000 { 943 compatible = "qcom,geni-spi"; 944 reg = <0 0x0088c000 0 0x4000>; 945 clock-names = "se"; 946 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; 947 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; 948 pinctrl-names = "default"; 949 pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; 950 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 951 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 952 interconnect-names = "qup-core", "qup-config"; 953 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, 954 <&gpi_dma2 1 3 QCOM_GPI_I2C>; 955 dma-names = "tx", "rx"; 956 #address-cells = <1>; 957 #size-cells = <0>; 958 status = "disabled"; 959 }; 960 961 i2c19: i2c@890000 { 962 compatible = "qcom,geni-i2c"; 963 reg = <0x0 0x00890000 0x0 0x4000>; 964 clock-names = "se"; 965 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; 966 pinctrl-names = "default"; 967 pinctrl-0 = <&qup_i2c19_data_clk>; 968 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; 969 #address-cells = <1>; 970 #size-cells = <0>; 971 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 972 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 973 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 974 interconnect-names = "qup-core", "qup-config", "qup-memory"; 975 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, 976 <&gpi_dma2 1 4 QCOM_GPI_I2C>; 977 dma-names = "tx", "rx"; 978 status = "disabled"; 979 }; 980 981 spi19: spi@890000 { 982 compatible = "qcom,geni-spi"; 983 reg = <0 0x00890000 0 0x4000>; 984 clock-names = "se"; 985 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; 986 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; 987 pinctrl-names = "default"; 988 pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; 989 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 990 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 991 interconnect-names = "qup-core", "qup-config"; 992 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, 993 <&gpi_dma2 1 4 QCOM_GPI_I2C>; 994 dma-names = "tx", "rx"; 995 #address-cells = <1>; 996 #size-cells = <0>; 997 status = "disabled"; 998 }; 999 1000 i2c20: i2c@894000 { 1001 compatible = "qcom,geni-i2c"; 1002 reg = <0x0 0x00894000 0x0 0x4000>; 1003 clock-names = "se"; 1004 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; 1005 pinctrl-names = "default"; 1006 pinctrl-0 = <&qup_i2c20_data_clk>; 1007 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; 1008 #address-cells = <1>; 1009 #size-cells = <0>; 1010 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 1011 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1012 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 1013 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1014 dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, 1015 <&gpi_dma2 1 5 QCOM_GPI_I2C>; 1016 dma-names = "tx", "rx"; 1017 status = "disabled"; 1018 }; 1019 1020 uart20: serial@894000 { 1021 compatible = "qcom,geni-uart"; 1022 reg = <0 0x00894000 0 0x4000>; 1023 clock-names = "se"; 1024 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; 1025 pinctrl-names = "default"; 1026 pinctrl-0 = <&qup_uart20_default>; 1027 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; 1028 status = "disabled"; 1029 }; 1030 1031 spi20: spi@894000 { 1032 compatible = "qcom,geni-spi"; 1033 reg = <0 0x00894000 0 0x4000>; 1034 clock-names = "se"; 1035 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; 1036 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; 1037 pinctrl-names = "default"; 1038 pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; 1039 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 1040 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 1041 interconnect-names = "qup-core", "qup-config"; 1042 dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, 1043 <&gpi_dma2 1 5 QCOM_GPI_SPI>; 1044 dma-names = "tx", "rx"; 1045 #address-cells = <1>; 1046 #size-cells = <0>; 1047 status = "disabled"; 1048 }; 1049 1050 i2c21: i2c@898000 { 1051 compatible = "qcom,geni-i2c"; 1052 reg = <0x0 0x00898000 0x0 0x4000>; 1053 clock-names = "se"; 1054 clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; 1055 pinctrl-names = "default"; 1056 pinctrl-0 = <&qup_i2c21_data_clk>; 1057 interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; 1058 #address-cells = <1>; 1059 #size-cells = <0>; 1060 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 1061 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1062 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; 1063 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1064 dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, 1065 <&gpi_dma2 1 6 QCOM_GPI_I2C>; 1066 dma-names = "tx", "rx"; 1067 status = "disabled"; 1068 }; 1069 1070 spi21: spi@898000 { 1071 compatible = "qcom,geni-spi"; 1072 reg = <0 0x00898000 0 0x4000>; 1073 clock-names = "se"; 1074 clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; 1075 interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; 1076 pinctrl-names = "default"; 1077 pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; 1078 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, 1079 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; 1080 interconnect-names = "qup-core", "qup-config"; 1081 dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, 1082 <&gpi_dma2 1 6 QCOM_GPI_SPI>; 1083 dma-names = "tx", "rx"; 1084 #address-cells = <1>; 1085 #size-cells = <0>; 1086 status = "disabled"; 1087 }; 1088 }; 1089 1090 gpi_dma0: dma-controller@900000 { 1091 compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; 1092 #dma-cells = <3>; 1093 reg = <0 0x00900000 0 0x60000>; 1094 interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, 1095 <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, 1096 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, 1097 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, 1098 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, 1099 <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, 1100 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, 1101 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, 1102 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, 1103 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, 1104 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, 1105 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; 1106 dma-channels = <12>; 1107 dma-channel-mask = <0x7e>; 1108 iommus = <&apps_smmu 0x5b6 0x0>; 1109 status = "disabled"; 1110 }; 1111 1112 qupv3_id_0: geniqup@9c0000 { 1113 compatible = "qcom,geni-se-qup"; 1114 reg = <0x0 0x009c0000 0x0 0x2000>; 1115 clock-names = "m-ahb", "s-ahb"; 1116 clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, 1117 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; 1118 iommus = <&apps_smmu 0x5a3 0x0>; 1119 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; 1120 interconnect-names = "qup-core"; 1121 #address-cells = <2>; 1122 #size-cells = <2>; 1123 ranges; 1124 status = "disabled"; 1125 1126 i2c0: i2c@980000 { 1127 compatible = "qcom,geni-i2c"; 1128 reg = <0x0 0x00980000 0x0 0x4000>; 1129 clock-names = "se"; 1130 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; 1131 pinctrl-names = "default"; 1132 pinctrl-0 = <&qup_i2c0_data_clk>; 1133 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; 1134 #address-cells = <1>; 1135 #size-cells = <0>; 1136 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1137 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1138 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1139 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1140 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, 1141 <&gpi_dma0 1 0 QCOM_GPI_I2C>; 1142 dma-names = "tx", "rx"; 1143 status = "disabled"; 1144 }; 1145 1146 spi0: spi@980000 { 1147 compatible = "qcom,geni-spi"; 1148 reg = <0x0 0x00980000 0x0 0x4000>; 1149 clock-names = "se"; 1150 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; 1151 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; 1152 pinctrl-names = "default"; 1153 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; 1154 power-domains = <&rpmhpd RPMHPD_CX>; 1155 operating-points-v2 = <&qup_opp_table_100mhz>; 1156 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1157 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1158 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1159 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1160 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, 1161 <&gpi_dma0 1 0 QCOM_GPI_SPI>; 1162 dma-names = "tx", "rx"; 1163 #address-cells = <1>; 1164 #size-cells = <0>; 1165 status = "disabled"; 1166 }; 1167 1168 i2c1: i2c@984000 { 1169 compatible = "qcom,geni-i2c"; 1170 reg = <0x0 0x00984000 0x0 0x4000>; 1171 clock-names = "se"; 1172 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 1173 pinctrl-names = "default"; 1174 pinctrl-0 = <&qup_i2c1_data_clk>; 1175 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; 1176 #address-cells = <1>; 1177 #size-cells = <0>; 1178 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1179 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1180 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1181 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1182 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, 1183 <&gpi_dma0 1 1 QCOM_GPI_I2C>; 1184 dma-names = "tx", "rx"; 1185 status = "disabled"; 1186 }; 1187 1188 spi1: spi@984000 { 1189 compatible = "qcom,geni-spi"; 1190 reg = <0x0 0x00984000 0x0 0x4000>; 1191 clock-names = "se"; 1192 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 1193 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; 1194 pinctrl-names = "default"; 1195 pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; 1196 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1197 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1198 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1199 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1200 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, 1201 <&gpi_dma0 1 1 QCOM_GPI_SPI>; 1202 dma-names = "tx", "rx"; 1203 #address-cells = <1>; 1204 #size-cells = <0>; 1205 status = "disabled"; 1206 }; 1207 1208 i2c2: i2c@988000 { 1209 compatible = "qcom,geni-i2c"; 1210 reg = <0x0 0x00988000 0x0 0x4000>; 1211 clock-names = "se"; 1212 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; 1213 pinctrl-names = "default"; 1214 pinctrl-0 = <&qup_i2c2_data_clk>; 1215 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; 1216 #address-cells = <1>; 1217 #size-cells = <0>; 1218 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1219 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1220 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1221 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1222 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, 1223 <&gpi_dma0 1 2 QCOM_GPI_I2C>; 1224 dma-names = "tx", "rx"; 1225 status = "disabled"; 1226 }; 1227 1228 spi2: spi@988000 { 1229 compatible = "qcom,geni-spi"; 1230 reg = <0x0 0x00988000 0x0 0x4000>; 1231 clock-names = "se"; 1232 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; 1233 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; 1234 pinctrl-names = "default"; 1235 pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; 1236 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1237 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1238 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1239 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1240 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, 1241 <&gpi_dma0 1 2 QCOM_GPI_SPI>; 1242 dma-names = "tx", "rx"; 1243 #address-cells = <1>; 1244 #size-cells = <0>; 1245 status = "disabled"; 1246 }; 1247 1248 1249 i2c3: i2c@98c000 { 1250 compatible = "qcom,geni-i2c"; 1251 reg = <0x0 0x0098c000 0x0 0x4000>; 1252 clock-names = "se"; 1253 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; 1254 pinctrl-names = "default"; 1255 pinctrl-0 = <&qup_i2c3_data_clk>; 1256 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; 1257 #address-cells = <1>; 1258 #size-cells = <0>; 1259 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1260 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1261 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1262 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1263 dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, 1264 <&gpi_dma0 1 3 QCOM_GPI_I2C>; 1265 dma-names = "tx", "rx"; 1266 status = "disabled"; 1267 }; 1268 1269 spi3: spi@98c000 { 1270 compatible = "qcom,geni-spi"; 1271 reg = <0x0 0x0098c000 0x0 0x4000>; 1272 clock-names = "se"; 1273 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; 1274 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; 1275 pinctrl-names = "default"; 1276 pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; 1277 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1278 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1279 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1280 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1281 dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, 1282 <&gpi_dma0 1 3 QCOM_GPI_SPI>; 1283 dma-names = "tx", "rx"; 1284 #address-cells = <1>; 1285 #size-cells = <0>; 1286 status = "disabled"; 1287 }; 1288 1289 i2c4: i2c@990000 { 1290 compatible = "qcom,geni-i2c"; 1291 reg = <0x0 0x00990000 0x0 0x4000>; 1292 clock-names = "se"; 1293 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; 1294 pinctrl-names = "default"; 1295 pinctrl-0 = <&qup_i2c4_data_clk>; 1296 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; 1297 #address-cells = <1>; 1298 #size-cells = <0>; 1299 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1300 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1301 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1302 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1303 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, 1304 <&gpi_dma0 1 4 QCOM_GPI_I2C>; 1305 dma-names = "tx", "rx"; 1306 status = "disabled"; 1307 }; 1308 1309 spi4: spi@990000 { 1310 compatible = "qcom,geni-spi"; 1311 reg = <0x0 0x00990000 0x0 0x4000>; 1312 clock-names = "se"; 1313 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; 1314 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; 1315 pinctrl-names = "default"; 1316 pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; 1317 power-domains = <&rpmhpd RPMHPD_CX>; 1318 operating-points-v2 = <&qup_opp_table_100mhz>; 1319 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1320 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1321 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1322 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1323 dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, 1324 <&gpi_dma0 1 4 QCOM_GPI_SPI>; 1325 dma-names = "tx", "rx"; 1326 #address-cells = <1>; 1327 #size-cells = <0>; 1328 status = "disabled"; 1329 }; 1330 1331 i2c5: i2c@994000 { 1332 compatible = "qcom,geni-i2c"; 1333 reg = <0x0 0x00994000 0x0 0x4000>; 1334 clock-names = "se"; 1335 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; 1336 pinctrl-names = "default"; 1337 pinctrl-0 = <&qup_i2c5_data_clk>; 1338 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; 1339 #address-cells = <1>; 1340 #size-cells = <0>; 1341 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1342 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1343 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1344 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1345 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, 1346 <&gpi_dma0 1 5 QCOM_GPI_I2C>; 1347 dma-names = "tx", "rx"; 1348 status = "disabled"; 1349 }; 1350 1351 spi5: spi@994000 { 1352 compatible = "qcom,geni-spi"; 1353 reg = <0x0 0x00994000 0x0 0x4000>; 1354 clock-names = "se"; 1355 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; 1356 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; 1357 pinctrl-names = "default"; 1358 pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; 1359 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1360 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1361 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1362 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1363 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, 1364 <&gpi_dma0 1 5 QCOM_GPI_SPI>; 1365 dma-names = "tx", "rx"; 1366 #address-cells = <1>; 1367 #size-cells = <0>; 1368 status = "disabled"; 1369 }; 1370 1371 1372 i2c6: i2c@998000 { 1373 compatible = "qcom,geni-i2c"; 1374 reg = <0x0 0x00998000 0x0 0x4000>; 1375 clock-names = "se"; 1376 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; 1377 pinctrl-names = "default"; 1378 pinctrl-0 = <&qup_i2c6_data_clk>; 1379 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; 1380 #address-cells = <1>; 1381 #size-cells = <0>; 1382 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1383 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1384 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1385 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1386 dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, 1387 <&gpi_dma0 1 6 QCOM_GPI_I2C>; 1388 dma-names = "tx", "rx"; 1389 status = "disabled"; 1390 }; 1391 1392 spi6: spi@998000 { 1393 compatible = "qcom,geni-spi"; 1394 reg = <0x0 0x00998000 0x0 0x4000>; 1395 clock-names = "se"; 1396 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; 1397 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; 1398 pinctrl-names = "default"; 1399 pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; 1400 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, 1401 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1402 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; 1403 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1404 dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, 1405 <&gpi_dma0 1 6 QCOM_GPI_SPI>; 1406 dma-names = "tx", "rx"; 1407 #address-cells = <1>; 1408 #size-cells = <0>; 1409 status = "disabled"; 1410 }; 1411 1412 uart7: serial@99c000 { 1413 compatible = "qcom,geni-debug-uart"; 1414 reg = <0 0x0099c000 0 0x4000>; 1415 clock-names = "se"; 1416 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; 1417 pinctrl-names = "default"; 1418 pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; 1419 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; 1420 status = "disabled"; 1421 }; 1422 }; 1423 1424 gpi_dma1: dma-controller@a00000 { 1425 compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; 1426 #dma-cells = <3>; 1427 reg = <0 0x00a00000 0 0x60000>; 1428 interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, 1429 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, 1430 <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, 1431 <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, 1432 <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, 1433 <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, 1434 <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, 1435 <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, 1436 <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, 1437 <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, 1438 <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, 1439 <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; 1440 dma-channels = <12>; 1441 dma-channel-mask = <0x7e>; 1442 iommus = <&apps_smmu 0x56 0x0>; 1443 status = "disabled"; 1444 }; 1445 1446 qupv3_id_1: geniqup@ac0000 { 1447 compatible = "qcom,geni-se-qup"; 1448 reg = <0x0 0x00ac0000 0x0 0x6000>; 1449 clock-names = "m-ahb", "s-ahb"; 1450 clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, 1451 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; 1452 iommus = <&apps_smmu 0x43 0x0>; 1453 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; 1454 interconnect-names = "qup-core"; 1455 #address-cells = <2>; 1456 #size-cells = <2>; 1457 ranges; 1458 status = "disabled"; 1459 1460 i2c8: i2c@a80000 { 1461 compatible = "qcom,geni-i2c"; 1462 reg = <0x0 0x00a80000 0x0 0x4000>; 1463 clock-names = "se"; 1464 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; 1465 pinctrl-names = "default"; 1466 pinctrl-0 = <&qup_i2c8_data_clk>; 1467 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; 1468 #address-cells = <1>; 1469 #size-cells = <0>; 1470 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1471 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1472 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1473 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1474 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, 1475 <&gpi_dma1 1 0 QCOM_GPI_I2C>; 1476 dma-names = "tx", "rx"; 1477 status = "disabled"; 1478 }; 1479 1480 spi8: spi@a80000 { 1481 compatible = "qcom,geni-spi"; 1482 reg = <0x0 0x00a80000 0x0 0x4000>; 1483 clock-names = "se"; 1484 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; 1485 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; 1486 pinctrl-names = "default"; 1487 pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; 1488 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1489 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1490 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1491 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1492 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, 1493 <&gpi_dma1 1 0 QCOM_GPI_SPI>; 1494 dma-names = "tx", "rx"; 1495 #address-cells = <1>; 1496 #size-cells = <0>; 1497 status = "disabled"; 1498 }; 1499 1500 i2c9: i2c@a84000 { 1501 compatible = "qcom,geni-i2c"; 1502 reg = <0x0 0x00a84000 0x0 0x4000>; 1503 clock-names = "se"; 1504 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; 1505 pinctrl-names = "default"; 1506 pinctrl-0 = <&qup_i2c9_data_clk>; 1507 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; 1508 #address-cells = <1>; 1509 #size-cells = <0>; 1510 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1511 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1512 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1513 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1514 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, 1515 <&gpi_dma1 1 1 QCOM_GPI_I2C>; 1516 dma-names = "tx", "rx"; 1517 status = "disabled"; 1518 }; 1519 1520 spi9: spi@a84000 { 1521 compatible = "qcom,geni-spi"; 1522 reg = <0x0 0x00a84000 0x0 0x4000>; 1523 clock-names = "se"; 1524 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; 1525 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; 1526 pinctrl-names = "default"; 1527 pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; 1528 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1529 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1530 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1531 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1532 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, 1533 <&gpi_dma1 1 1 QCOM_GPI_SPI>; 1534 dma-names = "tx", "rx"; 1535 #address-cells = <1>; 1536 #size-cells = <0>; 1537 status = "disabled"; 1538 }; 1539 1540 i2c10: i2c@a88000 { 1541 compatible = "qcom,geni-i2c"; 1542 reg = <0x0 0x00a88000 0x0 0x4000>; 1543 clock-names = "se"; 1544 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; 1545 pinctrl-names = "default"; 1546 pinctrl-0 = <&qup_i2c10_data_clk>; 1547 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; 1548 #address-cells = <1>; 1549 #size-cells = <0>; 1550 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1551 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1552 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1553 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1554 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, 1555 <&gpi_dma1 1 2 QCOM_GPI_I2C>; 1556 dma-names = "tx", "rx"; 1557 status = "disabled"; 1558 }; 1559 1560 spi10: spi@a88000 { 1561 compatible = "qcom,geni-spi"; 1562 reg = <0x0 0x00a88000 0x0 0x4000>; 1563 clock-names = "se"; 1564 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; 1565 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; 1566 pinctrl-names = "default"; 1567 pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; 1568 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1569 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1570 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1571 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1572 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, 1573 <&gpi_dma1 1 2 QCOM_GPI_SPI>; 1574 dma-names = "tx", "rx"; 1575 #address-cells = <1>; 1576 #size-cells = <0>; 1577 status = "disabled"; 1578 }; 1579 1580 i2c11: i2c@a8c000 { 1581 compatible = "qcom,geni-i2c"; 1582 reg = <0x0 0x00a8c000 0x0 0x4000>; 1583 clock-names = "se"; 1584 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; 1585 pinctrl-names = "default"; 1586 pinctrl-0 = <&qup_i2c11_data_clk>; 1587 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; 1588 #address-cells = <1>; 1589 #size-cells = <0>; 1590 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1591 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1592 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1593 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1594 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, 1595 <&gpi_dma1 1 3 QCOM_GPI_I2C>; 1596 dma-names = "tx", "rx"; 1597 status = "disabled"; 1598 }; 1599 1600 spi11: spi@a8c000 { 1601 compatible = "qcom,geni-spi"; 1602 reg = <0x0 0x00a8c000 0x0 0x4000>; 1603 clock-names = "se"; 1604 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; 1605 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; 1606 pinctrl-names = "default"; 1607 pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; 1608 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1609 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1610 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1611 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1612 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, 1613 <&gpi_dma1 1 3 QCOM_GPI_SPI>; 1614 dma-names = "tx", "rx"; 1615 #address-cells = <1>; 1616 #size-cells = <0>; 1617 status = "disabled"; 1618 }; 1619 1620 i2c12: i2c@a90000 { 1621 compatible = "qcom,geni-i2c"; 1622 reg = <0x0 0x00a90000 0x0 0x4000>; 1623 clock-names = "se"; 1624 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; 1625 pinctrl-names = "default"; 1626 pinctrl-0 = <&qup_i2c12_data_clk>; 1627 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; 1628 #address-cells = <1>; 1629 #size-cells = <0>; 1630 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1631 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1632 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1633 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1634 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, 1635 <&gpi_dma1 1 4 QCOM_GPI_I2C>; 1636 dma-names = "tx", "rx"; 1637 status = "disabled"; 1638 }; 1639 1640 spi12: spi@a90000 { 1641 compatible = "qcom,geni-spi"; 1642 reg = <0x0 0x00a90000 0x0 0x4000>; 1643 clock-names = "se"; 1644 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; 1645 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; 1646 pinctrl-names = "default"; 1647 pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; 1648 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1649 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1650 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1651 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1652 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, 1653 <&gpi_dma1 1 4 QCOM_GPI_SPI>; 1654 dma-names = "tx", "rx"; 1655 #address-cells = <1>; 1656 #size-cells = <0>; 1657 status = "disabled"; 1658 }; 1659 1660 i2c13: i2c@a94000 { 1661 compatible = "qcom,geni-i2c"; 1662 reg = <0 0x00a94000 0 0x4000>; 1663 clock-names = "se"; 1664 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; 1665 pinctrl-names = "default"; 1666 pinctrl-0 = <&qup_i2c13_data_clk>; 1667 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; 1668 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1669 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1670 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1671 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1672 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, 1673 <&gpi_dma1 1 5 QCOM_GPI_I2C>; 1674 dma-names = "tx", "rx"; 1675 #address-cells = <1>; 1676 #size-cells = <0>; 1677 status = "disabled"; 1678 }; 1679 1680 spi13: spi@a94000 { 1681 compatible = "qcom,geni-spi"; 1682 reg = <0x0 0x00a94000 0x0 0x4000>; 1683 clock-names = "se"; 1684 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; 1685 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; 1686 pinctrl-names = "default"; 1687 pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; 1688 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1689 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1690 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1691 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1692 dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, 1693 <&gpi_dma1 1 5 QCOM_GPI_SPI>; 1694 dma-names = "tx", "rx"; 1695 #address-cells = <1>; 1696 #size-cells = <0>; 1697 status = "disabled"; 1698 }; 1699 1700 i2c14: i2c@a98000 { 1701 compatible = "qcom,geni-i2c"; 1702 reg = <0 0x00a98000 0 0x4000>; 1703 clock-names = "se"; 1704 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; 1705 pinctrl-names = "default"; 1706 pinctrl-0 = <&qup_i2c14_data_clk>; 1707 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; 1708 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1709 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1710 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1711 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1712 dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, 1713 <&gpi_dma1 1 6 QCOM_GPI_I2C>; 1714 dma-names = "tx", "rx"; 1715 #address-cells = <1>; 1716 #size-cells = <0>; 1717 status = "disabled"; 1718 }; 1719 1720 spi14: spi@a98000 { 1721 compatible = "qcom,geni-spi"; 1722 reg = <0x0 0x00a98000 0x0 0x4000>; 1723 clock-names = "se"; 1724 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; 1725 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; 1726 pinctrl-names = "default"; 1727 pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; 1728 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, 1729 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, 1730 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; 1731 interconnect-names = "qup-core", "qup-config", "qup-memory"; 1732 dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, 1733 <&gpi_dma1 1 6 QCOM_GPI_SPI>; 1734 dma-names = "tx", "rx"; 1735 #address-cells = <1>; 1736 #size-cells = <0>; 1737 status = "disabled"; 1738 }; 1739 }; 1740 1741 rng: rng@10c3000 { 1742 compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee"; 1743 reg = <0 0x010c3000 0 0x1000>; 1744 }; 1745 1746 pcie0: pci@1c00000 { 1747 compatible = "qcom,pcie-sm8450-pcie0"; 1748 reg = <0 0x01c00000 0 0x3000>, 1749 <0 0x60000000 0 0xf1d>, 1750 <0 0x60000f20 0 0xa8>, 1751 <0 0x60001000 0 0x1000>, 1752 <0 0x60100000 0 0x100000>; 1753 reg-names = "parf", "dbi", "elbi", "atu", "config"; 1754 device_type = "pci"; 1755 linux,pci-domain = <0>; 1756 bus-range = <0x00 0xff>; 1757 num-lanes = <1>; 1758 1759 #address-cells = <3>; 1760 #size-cells = <2>; 1761 1762 ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, 1763 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; 1764 1765 /* 1766 * MSIs for BDF (1:0.0) only works with Device ID 0x5980. 1767 * Hence, the IDs are swapped. 1768 */ 1769 msi-map = <0x0 &gic_its 0x5981 0x1>, 1770 <0x100 &gic_its 0x5980 0x1>; 1771 msi-map-mask = <0xff00>; 1772 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; 1773 interrupt-names = "msi"; 1774 #interrupt-cells = <1>; 1775 interrupt-map-mask = <0 0 0 0x7>; 1776 interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1777 <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1778 <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1779 <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1780 1781 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, 1782 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, 1783 <&pcie0_lane>, 1784 <&rpmhcc RPMH_CXO_CLK>, 1785 <&gcc GCC_PCIE_0_AUX_CLK>, 1786 <&gcc GCC_PCIE_0_CFG_AHB_CLK>, 1787 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, 1788 <&gcc GCC_PCIE_0_SLV_AXI_CLK>, 1789 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, 1790 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, 1791 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, 1792 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; 1793 clock-names = "pipe", 1794 "pipe_mux", 1795 "phy_pipe", 1796 "ref", 1797 "aux", 1798 "cfg", 1799 "bus_master", 1800 "bus_slave", 1801 "slave_q2a", 1802 "ddrss_sf_tbu", 1803 "aggre0", 1804 "aggre1"; 1805 1806 iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, 1807 <0x100 &apps_smmu 0x1c01 0x1>; 1808 1809 resets = <&gcc GCC_PCIE_0_BCR>; 1810 reset-names = "pci"; 1811 1812 power-domains = <&gcc PCIE_0_GDSC>; 1813 1814 phys = <&pcie0_lane>; 1815 phy-names = "pciephy"; 1816 1817 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 1818 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 1819 1820 pinctrl-names = "default"; 1821 pinctrl-0 = <&pcie0_default_state>; 1822 1823 status = "disabled"; 1824 }; 1825 1826 pcie0_phy: phy@1c06000 { 1827 compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; 1828 reg = <0 0x01c06000 0 0x200>; 1829 #address-cells = <2>; 1830 #size-cells = <2>; 1831 ranges; 1832 clocks = <&gcc GCC_PCIE_0_AUX_CLK>, 1833 <&gcc GCC_PCIE_0_CFG_AHB_CLK>, 1834 <&gcc GCC_PCIE_0_CLKREF_EN>, 1835 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; 1836 clock-names = "aux", "cfg_ahb", "ref", "refgen"; 1837 1838 resets = <&gcc GCC_PCIE_0_PHY_BCR>; 1839 reset-names = "phy"; 1840 1841 assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; 1842 assigned-clock-rates = <100000000>; 1843 1844 status = "disabled"; 1845 1846 pcie0_lane: phy@1c06200 { 1847 reg = <0 0x01c06e00 0 0x200>, /* tx */ 1848 <0 0x01c07000 0 0x200>, /* rx */ 1849 <0 0x01c06200 0 0x200>, /* pcs */ 1850 <0 0x01c06600 0 0x200>; /* pcs_pcie */ 1851 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; 1852 clock-names = "pipe0"; 1853 1854 #clock-cells = <0>; 1855 #phy-cells = <0>; 1856 clock-output-names = "pcie_0_pipe_clk"; 1857 }; 1858 }; 1859 1860 pcie1: pci@1c08000 { 1861 compatible = "qcom,pcie-sm8450-pcie1"; 1862 reg = <0 0x01c08000 0 0x3000>, 1863 <0 0x40000000 0 0xf1d>, 1864 <0 0x40000f20 0 0xa8>, 1865 <0 0x40001000 0 0x1000>, 1866 <0 0x40100000 0 0x100000>; 1867 reg-names = "parf", "dbi", "elbi", "atu", "config"; 1868 device_type = "pci"; 1869 linux,pci-domain = <1>; 1870 bus-range = <0x00 0xff>; 1871 num-lanes = <2>; 1872 1873 #address-cells = <3>; 1874 #size-cells = <2>; 1875 1876 ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, 1877 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; 1878 1879 /* 1880 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. 1881 * Hence, the IDs are swapped. 1882 */ 1883 msi-map = <0x0 &gic_its 0x5a01 0x1>, 1884 <0x100 &gic_its 0x5a00 0x1>; 1885 msi-map-mask = <0xff00>; 1886 interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; 1887 interrupt-names = "msi"; 1888 #interrupt-cells = <1>; 1889 interrupt-map-mask = <0 0 0 0x7>; 1890 interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 1891 <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 1892 <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 1893 <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 1894 1895 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, 1896 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, 1897 <&pcie1_lane>, 1898 <&rpmhcc RPMH_CXO_CLK>, 1899 <&gcc GCC_PCIE_1_AUX_CLK>, 1900 <&gcc GCC_PCIE_1_CFG_AHB_CLK>, 1901 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, 1902 <&gcc GCC_PCIE_1_SLV_AXI_CLK>, 1903 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, 1904 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, 1905 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; 1906 clock-names = "pipe", 1907 "pipe_mux", 1908 "phy_pipe", 1909 "ref", 1910 "aux", 1911 "cfg", 1912 "bus_master", 1913 "bus_slave", 1914 "slave_q2a", 1915 "ddrss_sf_tbu", 1916 "aggre1"; 1917 1918 iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, 1919 <0x100 &apps_smmu 0x1c81 0x1>; 1920 1921 resets = <&gcc GCC_PCIE_1_BCR>; 1922 reset-names = "pci"; 1923 1924 power-domains = <&gcc PCIE_1_GDSC>; 1925 1926 phys = <&pcie1_lane>; 1927 phy-names = "pciephy"; 1928 1929 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 1930 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 1931 1932 pinctrl-names = "default"; 1933 pinctrl-0 = <&pcie1_default_state>; 1934 1935 status = "disabled"; 1936 }; 1937 1938 pcie1_phy: phy@1c0f000 { 1939 compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; 1940 reg = <0 0x01c0f000 0 0x200>; 1941 #address-cells = <2>; 1942 #size-cells = <2>; 1943 ranges; 1944 clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, 1945 <&gcc GCC_PCIE_1_CFG_AHB_CLK>, 1946 <&gcc GCC_PCIE_1_CLKREF_EN>, 1947 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; 1948 clock-names = "aux", "cfg_ahb", "ref", "refgen"; 1949 1950 resets = <&gcc GCC_PCIE_1_PHY_BCR>; 1951 reset-names = "phy"; 1952 1953 assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; 1954 assigned-clock-rates = <100000000>; 1955 1956 status = "disabled"; 1957 1958 pcie1_lane: phy@1c0e000 { 1959 reg = <0 0x01c0e000 0 0x200>, /* tx */ 1960 <0 0x01c0e200 0 0x300>, /* rx */ 1961 <0 0x01c0f200 0 0x200>, /* pcs */ 1962 <0 0x01c0e800 0 0x200>, /* tx */ 1963 <0 0x01c0ea00 0 0x300>, /* rx */ 1964 <0 0x01c0f400 0 0xc00>; /* pcs_pcie */ 1965 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; 1966 clock-names = "pipe0"; 1967 1968 #clock-cells = <0>; 1969 #phy-cells = <0>; 1970 clock-output-names = "pcie_1_pipe_clk"; 1971 }; 1972 }; 1973 1974 config_noc: interconnect@1500000 { 1975 compatible = "qcom,sm8450-config-noc"; 1976 reg = <0 0x01500000 0 0x1c000>; 1977 #interconnect-cells = <2>; 1978 qcom,bcm-voters = <&apps_bcm_voter>; 1979 }; 1980 1981 system_noc: interconnect@1680000 { 1982 compatible = "qcom,sm8450-system-noc"; 1983 reg = <0 0x01680000 0 0x1e200>; 1984 #interconnect-cells = <2>; 1985 qcom,bcm-voters = <&apps_bcm_voter>; 1986 }; 1987 1988 pcie_noc: interconnect@16c0000 { 1989 compatible = "qcom,sm8450-pcie-anoc"; 1990 reg = <0 0x016c0000 0 0xe280>; 1991 #interconnect-cells = <2>; 1992 qcom,bcm-voters = <&apps_bcm_voter>; 1993 }; 1994 1995 aggre1_noc: interconnect@16e0000 { 1996 compatible = "qcom,sm8450-aggre1-noc"; 1997 reg = <0 0x016e0000 0 0x1c080>; 1998 #interconnect-cells = <2>; 1999 clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, 2000 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; 2001 qcom,bcm-voters = <&apps_bcm_voter>; 2002 }; 2003 2004 aggre2_noc: interconnect@1700000 { 2005 compatible = "qcom,sm8450-aggre2-noc"; 2006 reg = <0 0x01700000 0 0x31080>; 2007 #interconnect-cells = <2>; 2008 qcom,bcm-voters = <&apps_bcm_voter>; 2009 clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, 2010 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, 2011 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, 2012 <&rpmhcc RPMH_IPA_CLK>; 2013 }; 2014 2015 mmss_noc: interconnect@1740000 { 2016 compatible = "qcom,sm8450-mmss-noc"; 2017 reg = <0 0x01740000 0 0x1f080>; 2018 #interconnect-cells = <2>; 2019 qcom,bcm-voters = <&apps_bcm_voter>; 2020 }; 2021 2022 tcsr_mutex: hwlock@1f40000 { 2023 compatible = "qcom,tcsr-mutex"; 2024 reg = <0x0 0x01f40000 0x0 0x40000>; 2025 #hwlock-cells = <1>; 2026 }; 2027 2028 tcsr: syscon@1fc0000 { 2029 compatible = "qcom,sm8450-tcsr", "syscon"; 2030 reg = <0x0 0x1fc0000 0x0 0x30000>; 2031 }; 2032 2033 usb_1_hsphy: phy@88e3000 { 2034 compatible = "qcom,sm8450-usb-hs-phy", 2035 "qcom,usb-snps-hs-7nm-phy"; 2036 reg = <0 0x088e3000 0 0x400>; 2037 status = "disabled"; 2038 #phy-cells = <0>; 2039 2040 clocks = <&rpmhcc RPMH_CXO_CLK>; 2041 clock-names = "ref"; 2042 2043 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; 2044 }; 2045 2046 usb_1_qmpphy: phy@88e8000 { 2047 compatible = "qcom,sm8450-qmp-usb3-dp-phy"; 2048 reg = <0 0x088e8000 0 0x3000>; 2049 2050 clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, 2051 <&rpmhcc RPMH_CXO_CLK>, 2052 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, 2053 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; 2054 clock-names = "aux", "ref", "com_aux", "usb3_pipe"; 2055 2056 resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, 2057 <&gcc GCC_USB3_PHY_PRIM_BCR>; 2058 reset-names = "phy", "common"; 2059 2060 #clock-cells = <1>; 2061 #phy-cells = <1>; 2062 2063 status = "disabled"; 2064 2065 ports { 2066 #address-cells = <1>; 2067 #size-cells = <0>; 2068 2069 port@0 { 2070 reg = <0>; 2071 2072 usb_1_qmpphy_out: endpoint { 2073 }; 2074 }; 2075 2076 port@1 { 2077 reg = <1>; 2078 2079 usb_1_qmpphy_usb_ss_in: endpoint { 2080 }; 2081 }; 2082 2083 port@2 { 2084 reg = <2>; 2085 2086 usb_1_qmpphy_dp_in: endpoint { 2087 }; 2088 }; 2089 }; 2090 }; 2091 2092 remoteproc_slpi: remoteproc@2400000 { 2093 compatible = "qcom,sm8450-slpi-pas"; 2094 reg = <0 0x02400000 0 0x4000>; 2095 2096 interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, 2097 <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, 2098 <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, 2099 <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, 2100 <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; 2101 interrupt-names = "wdog", "fatal", "ready", 2102 "handover", "stop-ack"; 2103 2104 clocks = <&rpmhcc RPMH_CXO_CLK>; 2105 clock-names = "xo"; 2106 2107 power-domains = <&rpmhpd RPMHPD_LCX>, 2108 <&rpmhpd RPMHPD_LMX>; 2109 power-domain-names = "lcx", "lmx"; 2110 2111 memory-region = <&slpi_mem>; 2112 2113 qcom,qmp = <&aoss_qmp>; 2114 2115 qcom,smem-states = <&smp2p_slpi_out 0>; 2116 qcom,smem-state-names = "stop"; 2117 2118 status = "disabled"; 2119 2120 glink-edge { 2121 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI 2122 IPCC_MPROC_SIGNAL_GLINK_QMP 2123 IRQ_TYPE_EDGE_RISING>; 2124 mboxes = <&ipcc IPCC_CLIENT_SLPI 2125 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2126 2127 label = "slpi"; 2128 qcom,remote-pid = <3>; 2129 2130 fastrpc { 2131 compatible = "qcom,fastrpc"; 2132 qcom,glink-channels = "fastrpcglink-apps-dsp"; 2133 label = "sdsp"; 2134 #address-cells = <1>; 2135 #size-cells = <0>; 2136 2137 compute-cb@1 { 2138 compatible = "qcom,fastrpc-compute-cb"; 2139 reg = <1>; 2140 iommus = <&apps_smmu 0x0541 0x0>; 2141 }; 2142 2143 compute-cb@2 { 2144 compatible = "qcom,fastrpc-compute-cb"; 2145 reg = <2>; 2146 iommus = <&apps_smmu 0x0542 0x0>; 2147 }; 2148 2149 compute-cb@3 { 2150 compatible = "qcom,fastrpc-compute-cb"; 2151 reg = <3>; 2152 iommus = <&apps_smmu 0x0543 0x0>; 2153 /* note: shared-cb = <4> in downstream */ 2154 }; 2155 }; 2156 }; 2157 }; 2158 2159 wsa2macro: codec@31e0000 { 2160 compatible = "qcom,sm8450-lpass-wsa-macro"; 2161 reg = <0 0x031e0000 0 0x1000>; 2162 clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2163 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2164 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2165 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2166 <&vamacro>; 2167 clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; 2168 assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2169 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 2170 assigned-clock-rates = <19200000>, <19200000>; 2171 2172 #clock-cells = <0>; 2173 clock-output-names = "wsa2-mclk"; 2174 pinctrl-names = "default"; 2175 pinctrl-0 = <&wsa2_swr_active>; 2176 #sound-dai-cells = <1>; 2177 }; 2178 2179 swr4: soundwire-controller@31f0000 { 2180 compatible = "qcom,soundwire-v1.7.0"; 2181 reg = <0 0x031f0000 0 0x2000>; 2182 interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; 2183 clocks = <&wsa2macro>; 2184 clock-names = "iface"; 2185 label = "WSA2"; 2186 2187 qcom,din-ports = <2>; 2188 qcom,dout-ports = <6>; 2189 2190 qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; 2191 qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; 2192 qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; 2193 qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2194 qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2195 qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2196 qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; 2197 qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2198 qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2199 2200 #address-cells = <2>; 2201 #size-cells = <0>; 2202 #sound-dai-cells = <1>; 2203 status = "disabled"; 2204 }; 2205 2206 rxmacro: codec@3200000 { 2207 compatible = "qcom,sm8450-lpass-rx-macro"; 2208 reg = <0 0x03200000 0 0x1000>; 2209 clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2210 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2211 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2212 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2213 <&vamacro>; 2214 clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; 2215 2216 assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2217 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 2218 assigned-clock-rates = <19200000>, <19200000>; 2219 2220 #clock-cells = <0>; 2221 clock-output-names = "mclk"; 2222 pinctrl-names = "default"; 2223 pinctrl-0 = <&rx_swr_active>; 2224 #sound-dai-cells = <1>; 2225 }; 2226 2227 swr1: soundwire-controller@3210000 { 2228 compatible = "qcom,soundwire-v1.7.0"; 2229 reg = <0 0x03210000 0 0x2000>; 2230 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; 2231 clocks = <&rxmacro>; 2232 clock-names = "iface"; 2233 label = "RX"; 2234 qcom,din-ports = <0>; 2235 qcom,dout-ports = <5>; 2236 2237 qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; 2238 qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; 2239 qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; 2240 qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; 2241 qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; 2242 qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; 2243 qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; 2244 qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; 2245 qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; 2246 2247 #address-cells = <2>; 2248 #size-cells = <0>; 2249 #sound-dai-cells = <1>; 2250 status = "disabled"; 2251 }; 2252 2253 txmacro: codec@3220000 { 2254 compatible = "qcom,sm8450-lpass-tx-macro"; 2255 reg = <0 0x03220000 0 0x1000>; 2256 clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2257 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2258 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2259 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2260 <&vamacro>; 2261 clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; 2262 assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2263 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 2264 assigned-clock-rates = <19200000>, <19200000>; 2265 2266 #clock-cells = <0>; 2267 clock-output-names = "mclk"; 2268 pinctrl-names = "default"; 2269 pinctrl-0 = <&tx_swr_active>; 2270 #sound-dai-cells = <1>; 2271 }; 2272 2273 wsamacro: codec@3240000 { 2274 compatible = "qcom,sm8450-lpass-wsa-macro"; 2275 reg = <0 0x03240000 0 0x1000>; 2276 clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2277 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2278 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2279 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2280 <&vamacro>; 2281 clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; 2282 2283 assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2284 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 2285 assigned-clock-rates = <19200000>, <19200000>; 2286 2287 #clock-cells = <0>; 2288 clock-output-names = "mclk"; 2289 pinctrl-names = "default"; 2290 pinctrl-0 = <&wsa_swr_active>; 2291 #sound-dai-cells = <1>; 2292 }; 2293 2294 swr0: soundwire-controller@3250000 { 2295 compatible = "qcom,soundwire-v1.7.0"; 2296 reg = <0 0x03250000 0 0x2000>; 2297 interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; 2298 clocks = <&wsamacro>; 2299 clock-names = "iface"; 2300 label = "WSA"; 2301 2302 qcom,din-ports = <2>; 2303 qcom,dout-ports = <6>; 2304 2305 qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; 2306 qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; 2307 qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; 2308 qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2309 qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2310 qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2311 qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; 2312 qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2313 qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; 2314 2315 #address-cells = <2>; 2316 #size-cells = <0>; 2317 #sound-dai-cells = <1>; 2318 status = "disabled"; 2319 }; 2320 2321 swr2: soundwire-controller@33b0000 { 2322 compatible = "qcom,soundwire-v1.7.0"; 2323 reg = <0 0x033b0000 0 0x2000>; 2324 interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, 2325 <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; 2326 interrupt-names = "core", "wakeup"; 2327 2328 clocks = <&vamacro>; 2329 clock-names = "iface"; 2330 label = "TX"; 2331 2332 qcom,din-ports = <4>; 2333 qcom,dout-ports = <0>; 2334 qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; 2335 qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; 2336 qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; 2337 qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; 2338 qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; 2339 qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; 2340 qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; 2341 qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; 2342 qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; 2343 2344 #address-cells = <2>; 2345 #size-cells = <0>; 2346 #sound-dai-cells = <1>; 2347 status = "disabled"; 2348 }; 2349 2350 vamacro: codec@33f0000 { 2351 compatible = "qcom,sm8450-lpass-va-macro"; 2352 reg = <0 0x033f0000 0 0x1000>; 2353 clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2354 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2355 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 2356 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 2357 clock-names = "mclk", "macro", "dcodec", "npl"; 2358 assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 2359 assigned-clock-rates = <19200000>; 2360 2361 #clock-cells = <0>; 2362 clock-output-names = "fsgen"; 2363 #sound-dai-cells = <1>; 2364 status = "disabled"; 2365 }; 2366 2367 remoteproc_adsp: remoteproc@30000000 { 2368 compatible = "qcom,sm8450-adsp-pas"; 2369 reg = <0 0x30000000 0 0x100>; 2370 2371 interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, 2372 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, 2373 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, 2374 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, 2375 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; 2376 interrupt-names = "wdog", "fatal", "ready", 2377 "handover", "stop-ack"; 2378 2379 clocks = <&rpmhcc RPMH_CXO_CLK>; 2380 clock-names = "xo"; 2381 2382 power-domains = <&rpmhpd RPMHPD_LCX>, 2383 <&rpmhpd RPMHPD_LMX>; 2384 power-domain-names = "lcx", "lmx"; 2385 2386 memory-region = <&adsp_mem>; 2387 2388 qcom,qmp = <&aoss_qmp>; 2389 2390 qcom,smem-states = <&smp2p_adsp_out 0>; 2391 qcom,smem-state-names = "stop"; 2392 2393 status = "disabled"; 2394 2395 remoteproc_adsp_glink: glink-edge { 2396 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 2397 IPCC_MPROC_SIGNAL_GLINK_QMP 2398 IRQ_TYPE_EDGE_RISING>; 2399 mboxes = <&ipcc IPCC_CLIENT_LPASS 2400 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2401 2402 label = "lpass"; 2403 qcom,remote-pid = <2>; 2404 2405 gpr { 2406 compatible = "qcom,gpr"; 2407 qcom,glink-channels = "adsp_apps"; 2408 qcom,domain = <GPR_DOMAIN_ID_ADSP>; 2409 qcom,intents = <512 20>; 2410 #address-cells = <1>; 2411 #size-cells = <0>; 2412 2413 q6apm: service@1 { 2414 compatible = "qcom,q6apm"; 2415 reg = <GPR_APM_MODULE_IID>; 2416 #sound-dai-cells = <0>; 2417 qcom,protection-domain = "avs/audio", 2418 "msm/adsp/audio_pd"; 2419 2420 q6apmdai: dais { 2421 compatible = "qcom,q6apm-dais"; 2422 iommus = <&apps_smmu 0x1801 0x0>; 2423 }; 2424 2425 q6apmbedai: bedais { 2426 compatible = "qcom,q6apm-lpass-dais"; 2427 #sound-dai-cells = <1>; 2428 }; 2429 }; 2430 2431 q6prm: service@2 { 2432 compatible = "qcom,q6prm"; 2433 reg = <GPR_PRM_MODULE_IID>; 2434 qcom,protection-domain = "avs/audio", 2435 "msm/adsp/audio_pd"; 2436 2437 q6prmcc: clock-controller { 2438 compatible = "qcom,q6prm-lpass-clocks"; 2439 #clock-cells = <2>; 2440 }; 2441 }; 2442 }; 2443 2444 fastrpc { 2445 compatible = "qcom,fastrpc"; 2446 qcom,glink-channels = "fastrpcglink-apps-dsp"; 2447 label = "adsp"; 2448 #address-cells = <1>; 2449 #size-cells = <0>; 2450 2451 compute-cb@3 { 2452 compatible = "qcom,fastrpc-compute-cb"; 2453 reg = <3>; 2454 iommus = <&apps_smmu 0x1803 0x0>; 2455 }; 2456 2457 compute-cb@4 { 2458 compatible = "qcom,fastrpc-compute-cb"; 2459 reg = <4>; 2460 iommus = <&apps_smmu 0x1804 0x0>; 2461 }; 2462 2463 compute-cb@5 { 2464 compatible = "qcom,fastrpc-compute-cb"; 2465 reg = <5>; 2466 iommus = <&apps_smmu 0x1805 0x0>; 2467 }; 2468 }; 2469 }; 2470 }; 2471 2472 remoteproc_cdsp: remoteproc@32300000 { 2473 compatible = "qcom,sm8450-cdsp-pas"; 2474 reg = <0 0x32300000 0 0x1400000>; 2475 2476 interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, 2477 <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, 2478 <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, 2479 <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, 2480 <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; 2481 interrupt-names = "wdog", "fatal", "ready", 2482 "handover", "stop-ack"; 2483 2484 clocks = <&rpmhcc RPMH_CXO_CLK>; 2485 clock-names = "xo"; 2486 2487 power-domains = <&rpmhpd RPMHPD_CX>, 2488 <&rpmhpd RPMHPD_MXC>; 2489 power-domain-names = "cx", "mxc"; 2490 2491 memory-region = <&cdsp_mem>; 2492 2493 qcom,qmp = <&aoss_qmp>; 2494 2495 qcom,smem-states = <&smp2p_cdsp_out 0>; 2496 qcom,smem-state-names = "stop"; 2497 2498 status = "disabled"; 2499 2500 glink-edge { 2501 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP 2502 IPCC_MPROC_SIGNAL_GLINK_QMP 2503 IRQ_TYPE_EDGE_RISING>; 2504 mboxes = <&ipcc IPCC_CLIENT_CDSP 2505 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2506 2507 label = "cdsp"; 2508 qcom,remote-pid = <5>; 2509 2510 fastrpc { 2511 compatible = "qcom,fastrpc"; 2512 qcom,glink-channels = "fastrpcglink-apps-dsp"; 2513 label = "cdsp"; 2514 #address-cells = <1>; 2515 #size-cells = <0>; 2516 2517 compute-cb@1 { 2518 compatible = "qcom,fastrpc-compute-cb"; 2519 reg = <1>; 2520 iommus = <&apps_smmu 0x2161 0x0400>, 2521 <&apps_smmu 0x1021 0x1420>; 2522 }; 2523 2524 compute-cb@2 { 2525 compatible = "qcom,fastrpc-compute-cb"; 2526 reg = <2>; 2527 iommus = <&apps_smmu 0x2162 0x0400>, 2528 <&apps_smmu 0x1022 0x1420>; 2529 }; 2530 2531 compute-cb@3 { 2532 compatible = "qcom,fastrpc-compute-cb"; 2533 reg = <3>; 2534 iommus = <&apps_smmu 0x2163 0x0400>, 2535 <&apps_smmu 0x1023 0x1420>; 2536 }; 2537 2538 compute-cb@4 { 2539 compatible = "qcom,fastrpc-compute-cb"; 2540 reg = <4>; 2541 iommus = <&apps_smmu 0x2164 0x0400>, 2542 <&apps_smmu 0x1024 0x1420>; 2543 }; 2544 2545 compute-cb@5 { 2546 compatible = "qcom,fastrpc-compute-cb"; 2547 reg = <5>; 2548 iommus = <&apps_smmu 0x2165 0x0400>, 2549 <&apps_smmu 0x1025 0x1420>; 2550 }; 2551 2552 compute-cb@6 { 2553 compatible = "qcom,fastrpc-compute-cb"; 2554 reg = <6>; 2555 iommus = <&apps_smmu 0x2166 0x0400>, 2556 <&apps_smmu 0x1026 0x1420>; 2557 }; 2558 2559 compute-cb@7 { 2560 compatible = "qcom,fastrpc-compute-cb"; 2561 reg = <7>; 2562 iommus = <&apps_smmu 0x2167 0x0400>, 2563 <&apps_smmu 0x1027 0x1420>; 2564 }; 2565 2566 compute-cb@8 { 2567 compatible = "qcom,fastrpc-compute-cb"; 2568 reg = <8>; 2569 iommus = <&apps_smmu 0x2168 0x0400>, 2570 <&apps_smmu 0x1028 0x1420>; 2571 }; 2572 2573 /* note: secure cb9 in downstream */ 2574 }; 2575 }; 2576 }; 2577 2578 remoteproc_mpss: remoteproc@4080000 { 2579 compatible = "qcom,sm8450-mpss-pas"; 2580 reg = <0x0 0x04080000 0x0 0x4040>; 2581 2582 interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, 2583 <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, 2584 <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, 2585 <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, 2586 <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, 2587 <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; 2588 interrupt-names = "wdog", "fatal", "ready", "handover", 2589 "stop-ack", "shutdown-ack"; 2590 2591 clocks = <&rpmhcc RPMH_CXO_CLK>; 2592 clock-names = "xo"; 2593 2594 power-domains = <&rpmhpd RPMHPD_CX>, 2595 <&rpmhpd RPMHPD_MSS>; 2596 power-domain-names = "cx", "mss"; 2597 2598 memory-region = <&mpss_mem>; 2599 2600 qcom,qmp = <&aoss_qmp>; 2601 2602 qcom,smem-states = <&smp2p_modem_out 0>; 2603 qcom,smem-state-names = "stop"; 2604 2605 status = "disabled"; 2606 2607 glink-edge { 2608 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS 2609 IPCC_MPROC_SIGNAL_GLINK_QMP 2610 IRQ_TYPE_EDGE_RISING>; 2611 mboxes = <&ipcc IPCC_CLIENT_MPSS 2612 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2613 label = "modem"; 2614 qcom,remote-pid = <1>; 2615 }; 2616 }; 2617 2618 videocc: clock-controller@aaf0000 { 2619 compatible = "qcom,sm8450-videocc"; 2620 reg = <0 0x0aaf0000 0 0x10000>; 2621 clocks = <&rpmhcc RPMH_CXO_CLK>, 2622 <&gcc GCC_VIDEO_AHB_CLK>; 2623 power-domains = <&rpmhpd RPMHPD_MMCX>; 2624 required-opps = <&rpmhpd_opp_low_svs>; 2625 #clock-cells = <1>; 2626 #reset-cells = <1>; 2627 #power-domain-cells = <1>; 2628 }; 2629 2630 cci0: cci@ac15000 { 2631 compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; 2632 reg = <0 0x0ac15000 0 0x1000>; 2633 interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; 2634 power-domains = <&camcc TITAN_TOP_GDSC>; 2635 2636 clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, 2637 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, 2638 <&camcc CAM_CC_CPAS_AHB_CLK>, 2639 <&camcc CAM_CC_CCI_0_CLK>, 2640 <&camcc CAM_CC_CCI_0_CLK_SRC>; 2641 clock-names = "camnoc_axi", 2642 "slow_ahb_src", 2643 "cpas_ahb", 2644 "cci", 2645 "cci_src"; 2646 pinctrl-0 = <&cci0_default &cci1_default>; 2647 pinctrl-1 = <&cci0_sleep &cci1_sleep>; 2648 pinctrl-names = "default", "sleep"; 2649 2650 status = "disabled"; 2651 #address-cells = <1>; 2652 #size-cells = <0>; 2653 2654 cci0_i2c0: i2c-bus@0 { 2655 reg = <0>; 2656 clock-frequency = <1000000>; 2657 #address-cells = <1>; 2658 #size-cells = <0>; 2659 }; 2660 2661 cci0_i2c1: i2c-bus@1 { 2662 reg = <1>; 2663 clock-frequency = <1000000>; 2664 #address-cells = <1>; 2665 #size-cells = <0>; 2666 }; 2667 }; 2668 2669 cci1: cci@ac16000 { 2670 compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; 2671 reg = <0 0x0ac16000 0 0x1000>; 2672 interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; 2673 power-domains = <&camcc TITAN_TOP_GDSC>; 2674 2675 clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, 2676 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, 2677 <&camcc CAM_CC_CPAS_AHB_CLK>, 2678 <&camcc CAM_CC_CCI_1_CLK>, 2679 <&camcc CAM_CC_CCI_1_CLK_SRC>; 2680 clock-names = "camnoc_axi", 2681 "slow_ahb_src", 2682 "cpas_ahb", 2683 "cci", 2684 "cci_src"; 2685 pinctrl-0 = <&cci2_default &cci3_default>; 2686 pinctrl-1 = <&cci2_sleep &cci3_sleep>; 2687 pinctrl-names = "default", "sleep"; 2688 2689 status = "disabled"; 2690 #address-cells = <1>; 2691 #size-cells = <0>; 2692 2693 cci1_i2c0: i2c-bus@0 { 2694 reg = <0>; 2695 clock-frequency = <1000000>; 2696 #address-cells = <1>; 2697 #size-cells = <0>; 2698 }; 2699 2700 cci1_i2c1: i2c-bus@1 { 2701 reg = <1>; 2702 clock-frequency = <1000000>; 2703 #address-cells = <1>; 2704 #size-cells = <0>; 2705 }; 2706 }; 2707 2708 camcc: clock-controller@ade0000 { 2709 compatible = "qcom,sm8450-camcc"; 2710 reg = <0 0x0ade0000 0 0x20000>; 2711 clocks = <&gcc GCC_CAMERA_AHB_CLK>, 2712 <&rpmhcc RPMH_CXO_CLK>, 2713 <&rpmhcc RPMH_CXO_CLK_A>, 2714 <&sleep_clk>; 2715 power-domains = <&rpmhpd RPMHPD_MMCX>; 2716 required-opps = <&rpmhpd_opp_low_svs>; 2717 #clock-cells = <1>; 2718 #reset-cells = <1>; 2719 #power-domain-cells = <1>; 2720 status = "disabled"; 2721 }; 2722 2723 mdss: display-subsystem@ae00000 { 2724 compatible = "qcom,sm8450-mdss"; 2725 reg = <0 0x0ae00000 0 0x1000>; 2726 reg-names = "mdss"; 2727 2728 /* same path used twice */ 2729 interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, 2730 <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, 2731 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY 2732 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; 2733 interconnect-names = "mdp0-mem", 2734 "mdp1-mem", 2735 "cpu-cfg"; 2736 2737 resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; 2738 2739 power-domains = <&dispcc MDSS_GDSC>; 2740 2741 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, 2742 <&gcc GCC_DISP_HF_AXI_CLK>, 2743 <&gcc GCC_DISP_SF_AXI_CLK>, 2744 <&dispcc DISP_CC_MDSS_MDP_CLK>; 2745 2746 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 2747 interrupt-controller; 2748 #interrupt-cells = <1>; 2749 2750 iommus = <&apps_smmu 0x2800 0x402>; 2751 2752 #address-cells = <2>; 2753 #size-cells = <2>; 2754 ranges; 2755 2756 status = "disabled"; 2757 2758 mdss_mdp: display-controller@ae01000 { 2759 compatible = "qcom,sm8450-dpu"; 2760 reg = <0 0x0ae01000 0 0x8f000>, 2761 <0 0x0aeb0000 0 0x2008>; 2762 reg-names = "mdp", "vbif"; 2763 2764 clocks = <&gcc GCC_DISP_HF_AXI_CLK>, 2765 <&gcc GCC_DISP_SF_AXI_CLK>, 2766 <&dispcc DISP_CC_MDSS_AHB_CLK>, 2767 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, 2768 <&dispcc DISP_CC_MDSS_MDP_CLK>, 2769 <&dispcc DISP_CC_MDSS_VSYNC_CLK>; 2770 clock-names = "bus", 2771 "nrt_bus", 2772 "iface", 2773 "lut", 2774 "core", 2775 "vsync"; 2776 2777 assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; 2778 assigned-clock-rates = <19200000>; 2779 2780 operating-points-v2 = <&mdp_opp_table>; 2781 power-domains = <&rpmhpd RPMHPD_MMCX>; 2782 2783 interrupt-parent = <&mdss>; 2784 interrupts = <0>; 2785 2786 ports { 2787 #address-cells = <1>; 2788 #size-cells = <0>; 2789 2790 port@0 { 2791 reg = <0>; 2792 dpu_intf1_out: endpoint { 2793 remote-endpoint = <&mdss_dsi0_in>; 2794 }; 2795 }; 2796 2797 port@1 { 2798 reg = <1>; 2799 dpu_intf2_out: endpoint { 2800 remote-endpoint = <&mdss_dsi1_in>; 2801 }; 2802 }; 2803 2804 port@2 { 2805 reg = <2>; 2806 dpu_intf0_out: endpoint { 2807 remote-endpoint = <&mdss_dp0_in>; 2808 }; 2809 }; 2810 }; 2811 2812 mdp_opp_table: opp-table { 2813 compatible = "operating-points-v2"; 2814 2815 opp-172000000 { 2816 opp-hz = /bits/ 64 <172000000>; 2817 required-opps = <&rpmhpd_opp_low_svs_d1>; 2818 }; 2819 2820 opp-200000000 { 2821 opp-hz = /bits/ 64 <200000000>; 2822 required-opps = <&rpmhpd_opp_low_svs>; 2823 }; 2824 2825 opp-325000000 { 2826 opp-hz = /bits/ 64 <325000000>; 2827 required-opps = <&rpmhpd_opp_svs>; 2828 }; 2829 2830 opp-375000000 { 2831 opp-hz = /bits/ 64 <375000000>; 2832 required-opps = <&rpmhpd_opp_svs_l1>; 2833 }; 2834 2835 opp-500000000 { 2836 opp-hz = /bits/ 64 <500000000>; 2837 required-opps = <&rpmhpd_opp_nom>; 2838 }; 2839 }; 2840 }; 2841 2842 mdss_dp0: displayport-controller@ae90000 { 2843 compatible = "qcom,sm8450-dp", "qcom,sm8350-dp"; 2844 reg = <0 0xae90000 0 0x200>, 2845 <0 0xae90200 0 0x200>, 2846 <0 0xae90400 0 0xc00>, 2847 <0 0xae91000 0 0x400>, 2848 <0 0xae91400 0 0x400>; 2849 interrupt-parent = <&mdss>; 2850 interrupts = <12>; 2851 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, 2852 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, 2853 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, 2854 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, 2855 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; 2856 clock-names = "core_iface", 2857 "core_aux", 2858 "ctrl_link", 2859 "ctrl_link_iface", 2860 "stream_pixel"; 2861 2862 assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, 2863 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; 2864 assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, 2865 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; 2866 2867 phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; 2868 phy-names = "dp"; 2869 2870 #sound-dai-cells = <0>; 2871 2872 operating-points-v2 = <&dp_opp_table>; 2873 power-domains = <&rpmhpd RPMHPD_MMCX>; 2874 2875 status = "disabled"; 2876 2877 ports { 2878 #address-cells = <1>; 2879 #size-cells = <0>; 2880 2881 port@0 { 2882 reg = <0>; 2883 mdss_dp0_in: endpoint { 2884 remote-endpoint = <&dpu_intf0_out>; 2885 }; 2886 }; 2887 }; 2888 2889 dp_opp_table: opp-table { 2890 compatible = "operating-points-v2"; 2891 2892 opp-160000000 { 2893 opp-hz = /bits/ 64 <160000000>; 2894 required-opps = <&rpmhpd_opp_low_svs>; 2895 }; 2896 2897 opp-270000000 { 2898 opp-hz = /bits/ 64 <270000000>; 2899 required-opps = <&rpmhpd_opp_svs>; 2900 }; 2901 2902 opp-540000000 { 2903 opp-hz = /bits/ 64 <540000000>; 2904 required-opps = <&rpmhpd_opp_svs_l1>; 2905 }; 2906 2907 opp-810000000 { 2908 opp-hz = /bits/ 64 <810000000>; 2909 required-opps = <&rpmhpd_opp_nom>; 2910 }; 2911 }; 2912 }; 2913 2914 mdss_dsi0: dsi@ae94000 { 2915 compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; 2916 reg = <0 0x0ae94000 0 0x400>; 2917 reg-names = "dsi_ctrl"; 2918 2919 interrupt-parent = <&mdss>; 2920 interrupts = <4>; 2921 2922 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, 2923 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, 2924 <&dispcc DISP_CC_MDSS_PCLK0_CLK>, 2925 <&dispcc DISP_CC_MDSS_ESC0_CLK>, 2926 <&dispcc DISP_CC_MDSS_AHB_CLK>, 2927 <&gcc GCC_DISP_HF_AXI_CLK>; 2928 clock-names = "byte", 2929 "byte_intf", 2930 "pixel", 2931 "core", 2932 "iface", 2933 "bus"; 2934 2935 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; 2936 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; 2937 2938 operating-points-v2 = <&mdss_dsi_opp_table>; 2939 power-domains = <&rpmhpd RPMHPD_MMCX>; 2940 2941 phys = <&mdss_dsi0_phy>; 2942 phy-names = "dsi"; 2943 2944 #address-cells = <1>; 2945 #size-cells = <0>; 2946 2947 status = "disabled"; 2948 2949 ports { 2950 #address-cells = <1>; 2951 #size-cells = <0>; 2952 2953 port@0 { 2954 reg = <0>; 2955 mdss_dsi0_in: endpoint { 2956 remote-endpoint = <&dpu_intf1_out>; 2957 }; 2958 }; 2959 2960 port@1 { 2961 reg = <1>; 2962 mdss_dsi0_out: endpoint { 2963 }; 2964 }; 2965 }; 2966 2967 mdss_dsi_opp_table: opp-table { 2968 compatible = "operating-points-v2"; 2969 2970 opp-187500000 { 2971 opp-hz = /bits/ 64 <187500000>; 2972 required-opps = <&rpmhpd_opp_low_svs>; 2973 }; 2974 2975 opp-300000000 { 2976 opp-hz = /bits/ 64 <300000000>; 2977 required-opps = <&rpmhpd_opp_svs>; 2978 }; 2979 2980 opp-358000000 { 2981 opp-hz = /bits/ 64 <358000000>; 2982 required-opps = <&rpmhpd_opp_svs_l1>; 2983 }; 2984 }; 2985 }; 2986 2987 mdss_dsi0_phy: phy@ae94400 { 2988 compatible = "qcom,sm8450-dsi-phy-5nm"; 2989 reg = <0 0x0ae94400 0 0x200>, 2990 <0 0x0ae94600 0 0x280>, 2991 <0 0x0ae94900 0 0x260>; 2992 reg-names = "dsi_phy", 2993 "dsi_phy_lane", 2994 "dsi_pll"; 2995 2996 #clock-cells = <1>; 2997 #phy-cells = <0>; 2998 2999 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, 3000 <&rpmhcc RPMH_CXO_CLK>; 3001 clock-names = "iface", "ref"; 3002 3003 status = "disabled"; 3004 }; 3005 3006 mdss_dsi1: dsi@ae96000 { 3007 compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; 3008 reg = <0 0x0ae96000 0 0x400>; 3009 reg-names = "dsi_ctrl"; 3010 3011 interrupt-parent = <&mdss>; 3012 interrupts = <5>; 3013 3014 clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, 3015 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, 3016 <&dispcc DISP_CC_MDSS_PCLK1_CLK>, 3017 <&dispcc DISP_CC_MDSS_ESC1_CLK>, 3018 <&dispcc DISP_CC_MDSS_AHB_CLK>, 3019 <&gcc GCC_DISP_HF_AXI_CLK>; 3020 clock-names = "byte", 3021 "byte_intf", 3022 "pixel", 3023 "core", 3024 "iface", 3025 "bus"; 3026 3027 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; 3028 assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; 3029 3030 operating-points-v2 = <&mdss_dsi_opp_table>; 3031 power-domains = <&rpmhpd RPMHPD_MMCX>; 3032 3033 phys = <&mdss_dsi1_phy>; 3034 phy-names = "dsi"; 3035 3036 #address-cells = <1>; 3037 #size-cells = <0>; 3038 3039 status = "disabled"; 3040 3041 ports { 3042 #address-cells = <1>; 3043 #size-cells = <0>; 3044 3045 port@0 { 3046 reg = <0>; 3047 mdss_dsi1_in: endpoint { 3048 remote-endpoint = <&dpu_intf2_out>; 3049 }; 3050 }; 3051 3052 port@1 { 3053 reg = <1>; 3054 mdss_dsi1_out: endpoint { 3055 }; 3056 }; 3057 }; 3058 }; 3059 3060 mdss_dsi1_phy: phy@ae96400 { 3061 compatible = "qcom,sm8450-dsi-phy-5nm"; 3062 reg = <0 0x0ae96400 0 0x200>, 3063 <0 0x0ae96600 0 0x280>, 3064 <0 0x0ae96900 0 0x260>; 3065 reg-names = "dsi_phy", 3066 "dsi_phy_lane", 3067 "dsi_pll"; 3068 3069 #clock-cells = <1>; 3070 #phy-cells = <0>; 3071 3072 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, 3073 <&rpmhcc RPMH_CXO_CLK>; 3074 clock-names = "iface", "ref"; 3075 3076 status = "disabled"; 3077 }; 3078 }; 3079 3080 dispcc: clock-controller@af00000 { 3081 compatible = "qcom,sm8450-dispcc"; 3082 reg = <0 0x0af00000 0 0x20000>; 3083 clocks = <&rpmhcc RPMH_CXO_CLK>, 3084 <&rpmhcc RPMH_CXO_CLK_A>, 3085 <&gcc GCC_DISP_AHB_CLK>, 3086 <&sleep_clk>, 3087 <&mdss_dsi0_phy 0>, 3088 <&mdss_dsi0_phy 1>, 3089 <&mdss_dsi1_phy 0>, 3090 <&mdss_dsi1_phy 1>, 3091 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, 3092 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, 3093 <0>, /* dp1 */ 3094 <0>, 3095 <0>, /* dp2 */ 3096 <0>, 3097 <0>, /* dp3 */ 3098 <0>; 3099 power-domains = <&rpmhpd RPMHPD_MMCX>; 3100 required-opps = <&rpmhpd_opp_low_svs>; 3101 #clock-cells = <1>; 3102 #reset-cells = <1>; 3103 #power-domain-cells = <1>; 3104 status = "disabled"; 3105 }; 3106 3107 pdc: interrupt-controller@b220000 { 3108 compatible = "qcom,sm8450-pdc", "qcom,pdc"; 3109 reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; 3110 qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, 3111 <94 609 31>, <125 63 1>, <126 716 12>; 3112 #interrupt-cells = <2>; 3113 interrupt-parent = <&intc>; 3114 interrupt-controller; 3115 }; 3116 3117 tsens0: thermal-sensor@c263000 { 3118 compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; 3119 reg = <0 0x0c263000 0 0x1000>, /* TM */ 3120 <0 0x0c222000 0 0x1000>; /* SROT */ 3121 #qcom,sensors = <16>; 3122 interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, 3123 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; 3124 interrupt-names = "uplow", "critical"; 3125 #thermal-sensor-cells = <1>; 3126 }; 3127 3128 tsens1: thermal-sensor@c265000 { 3129 compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; 3130 reg = <0 0x0c265000 0 0x1000>, /* TM */ 3131 <0 0x0c223000 0 0x1000>; /* SROT */ 3132 #qcom,sensors = <16>; 3133 interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, 3134 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; 3135 interrupt-names = "uplow", "critical"; 3136 #thermal-sensor-cells = <1>; 3137 }; 3138 3139 aoss_qmp: power-management@c300000 { 3140 compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; 3141 reg = <0 0x0c300000 0 0x400>; 3142 interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP 3143 IRQ_TYPE_EDGE_RISING>; 3144 mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; 3145 3146 #clock-cells = <0>; 3147 }; 3148 3149 sram@c3f0000 { 3150 compatible = "qcom,rpmh-stats"; 3151 reg = <0 0x0c3f0000 0 0x400>; 3152 }; 3153 3154 spmi_bus: spmi@c400000 { 3155 compatible = "qcom,spmi-pmic-arb"; 3156 reg = <0 0x0c400000 0 0x00003000>, 3157 <0 0x0c500000 0 0x00400000>, 3158 <0 0x0c440000 0 0x00080000>, 3159 <0 0x0c4c0000 0 0x00010000>, 3160 <0 0x0c42d000 0 0x00010000>; 3161 reg-names = "core", 3162 "chnls", 3163 "obsrvr", 3164 "intr", 3165 "cnfg"; 3166 interrupt-names = "periph_irq"; 3167 interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; 3168 qcom,ee = <0>; 3169 qcom,channel = <0>; 3170 interrupt-controller; 3171 #interrupt-cells = <4>; 3172 #address-cells = <2>; 3173 #size-cells = <0>; 3174 }; 3175 3176 ipcc: mailbox@ed18000 { 3177 compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; 3178 reg = <0 0x0ed18000 0 0x1000>; 3179 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; 3180 interrupt-controller; 3181 #interrupt-cells = <3>; 3182 #mbox-cells = <2>; 3183 }; 3184 3185 tlmm: pinctrl@f100000 { 3186 compatible = "qcom,sm8450-tlmm"; 3187 reg = <0 0x0f100000 0 0x300000>; 3188 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 3189 gpio-controller; 3190 #gpio-cells = <2>; 3191 interrupt-controller; 3192 #interrupt-cells = <2>; 3193 gpio-ranges = <&tlmm 0 0 211>; 3194 wakeup-parent = <&pdc>; 3195 3196 sdc2_default_state: sdc2-default-state { 3197 clk-pins { 3198 pins = "sdc2_clk"; 3199 drive-strength = <16>; 3200 bias-disable; 3201 }; 3202 3203 cmd-pins { 3204 pins = "sdc2_cmd"; 3205 drive-strength = <16>; 3206 bias-pull-up; 3207 }; 3208 3209 data-pins { 3210 pins = "sdc2_data"; 3211 drive-strength = <16>; 3212 bias-pull-up; 3213 }; 3214 }; 3215 3216 sdc2_sleep_state: sdc2-sleep-state { 3217 clk-pins { 3218 pins = "sdc2_clk"; 3219 drive-strength = <2>; 3220 bias-disable; 3221 }; 3222 3223 cmd-pins { 3224 pins = "sdc2_cmd"; 3225 drive-strength = <2>; 3226 bias-pull-up; 3227 }; 3228 3229 data-pins { 3230 pins = "sdc2_data"; 3231 drive-strength = <2>; 3232 bias-pull-up; 3233 }; 3234 }; 3235 3236 cci0_default: cci0-default-state { 3237 /* SDA, SCL */ 3238 pins = "gpio110", "gpio111"; 3239 function = "cci_i2c"; 3240 drive-strength = <2>; 3241 bias-pull-up; 3242 }; 3243 3244 cci0_sleep: cci0-sleep-state { 3245 /* SDA, SCL */ 3246 pins = "gpio110", "gpio111"; 3247 function = "cci_i2c"; 3248 drive-strength = <2>; 3249 bias-pull-down; 3250 }; 3251 3252 cci1_default: cci1-default-state { 3253 /* SDA, SCL */ 3254 pins = "gpio112", "gpio113"; 3255 function = "cci_i2c"; 3256 drive-strength = <2>; 3257 bias-pull-up; 3258 }; 3259 3260 cci1_sleep: cci1-sleep-state { 3261 /* SDA, SCL */ 3262 pins = "gpio112", "gpio113"; 3263 function = "cci_i2c"; 3264 drive-strength = <2>; 3265 bias-pull-down; 3266 }; 3267 3268 cci2_default: cci2-default-state { 3269 /* SDA, SCL */ 3270 pins = "gpio114", "gpio115"; 3271 function = "cci_i2c"; 3272 drive-strength = <2>; 3273 bias-pull-up; 3274 }; 3275 3276 cci2_sleep: cci2-sleep-state { 3277 /* SDA, SCL */ 3278 pins = "gpio114", "gpio115"; 3279 function = "cci_i2c"; 3280 drive-strength = <2>; 3281 bias-pull-down; 3282 }; 3283 3284 cci3_default: cci3-default-state { 3285 /* SDA, SCL */ 3286 pins = "gpio208", "gpio209"; 3287 function = "cci_i2c"; 3288 drive-strength = <2>; 3289 bias-pull-up; 3290 }; 3291 3292 cci3_sleep: cci3-sleep-state { 3293 /* SDA, SCL */ 3294 pins = "gpio208", "gpio209"; 3295 function = "cci_i2c"; 3296 drive-strength = <2>; 3297 bias-pull-down; 3298 }; 3299 3300 pcie0_default_state: pcie0-default-state { 3301 perst-pins { 3302 pins = "gpio94"; 3303 function = "gpio"; 3304 drive-strength = <2>; 3305 bias-pull-down; 3306 }; 3307 3308 clkreq-pins { 3309 pins = "gpio95"; 3310 function = "pcie0_clkreqn"; 3311 drive-strength = <2>; 3312 bias-pull-up; 3313 }; 3314 3315 wake-pins { 3316 pins = "gpio96"; 3317 function = "gpio"; 3318 drive-strength = <2>; 3319 bias-pull-up; 3320 }; 3321 }; 3322 3323 pcie1_default_state: pcie1-default-state { 3324 perst-pins { 3325 pins = "gpio97"; 3326 function = "gpio"; 3327 drive-strength = <2>; 3328 bias-pull-down; 3329 }; 3330 3331 clkreq-pins { 3332 pins = "gpio98"; 3333 function = "pcie1_clkreqn"; 3334 drive-strength = <2>; 3335 bias-pull-up; 3336 }; 3337 3338 wake-pins { 3339 pins = "gpio99"; 3340 function = "gpio"; 3341 drive-strength = <2>; 3342 bias-pull-up; 3343 }; 3344 }; 3345 3346 qup_i2c0_data_clk: qup-i2c0-data-clk-state { 3347 pins = "gpio0", "gpio1"; 3348 function = "qup0"; 3349 }; 3350 3351 qup_i2c1_data_clk: qup-i2c1-data-clk-state { 3352 pins = "gpio4", "gpio5"; 3353 function = "qup1"; 3354 }; 3355 3356 qup_i2c2_data_clk: qup-i2c2-data-clk-state { 3357 pins = "gpio8", "gpio9"; 3358 function = "qup2"; 3359 }; 3360 3361 qup_i2c3_data_clk: qup-i2c3-data-clk-state { 3362 pins = "gpio12", "gpio13"; 3363 function = "qup3"; 3364 }; 3365 3366 qup_i2c4_data_clk: qup-i2c4-data-clk-state { 3367 pins = "gpio16", "gpio17"; 3368 function = "qup4"; 3369 }; 3370 3371 qup_i2c5_data_clk: qup-i2c5-data-clk-state { 3372 pins = "gpio206", "gpio207"; 3373 function = "qup5"; 3374 }; 3375 3376 qup_i2c6_data_clk: qup-i2c6-data-clk-state { 3377 pins = "gpio20", "gpio21"; 3378 function = "qup6"; 3379 }; 3380 3381 qup_i2c8_data_clk: qup-i2c8-data-clk-state { 3382 pins = "gpio28", "gpio29"; 3383 function = "qup8"; 3384 }; 3385 3386 qup_i2c9_data_clk: qup-i2c9-data-clk-state { 3387 pins = "gpio32", "gpio33"; 3388 function = "qup9"; 3389 }; 3390 3391 qup_i2c10_data_clk: qup-i2c10-data-clk-state { 3392 pins = "gpio36", "gpio37"; 3393 function = "qup10"; 3394 }; 3395 3396 qup_i2c11_data_clk: qup-i2c11-data-clk-state { 3397 pins = "gpio40", "gpio41"; 3398 function = "qup11"; 3399 }; 3400 3401 qup_i2c12_data_clk: qup-i2c12-data-clk-state { 3402 pins = "gpio44", "gpio45"; 3403 function = "qup12"; 3404 }; 3405 3406 qup_i2c13_data_clk: qup-i2c13-data-clk-state { 3407 pins = "gpio48", "gpio49"; 3408 function = "qup13"; 3409 drive-strength = <2>; 3410 bias-pull-up; 3411 }; 3412 3413 qup_i2c14_data_clk: qup-i2c14-data-clk-state { 3414 pins = "gpio52", "gpio53"; 3415 function = "qup14"; 3416 drive-strength = <2>; 3417 bias-pull-up; 3418 }; 3419 3420 qup_i2c15_data_clk: qup-i2c15-data-clk-state { 3421 pins = "gpio56", "gpio57"; 3422 function = "qup15"; 3423 }; 3424 3425 qup_i2c16_data_clk: qup-i2c16-data-clk-state { 3426 pins = "gpio60", "gpio61"; 3427 function = "qup16"; 3428 }; 3429 3430 qup_i2c17_data_clk: qup-i2c17-data-clk-state { 3431 pins = "gpio64", "gpio65"; 3432 function = "qup17"; 3433 }; 3434 3435 qup_i2c18_data_clk: qup-i2c18-data-clk-state { 3436 pins = "gpio68", "gpio69"; 3437 function = "qup18"; 3438 }; 3439 3440 qup_i2c19_data_clk: qup-i2c19-data-clk-state { 3441 pins = "gpio72", "gpio73"; 3442 function = "qup19"; 3443 }; 3444 3445 qup_i2c20_data_clk: qup-i2c20-data-clk-state { 3446 pins = "gpio76", "gpio77"; 3447 function = "qup20"; 3448 }; 3449 3450 qup_i2c21_data_clk: qup-i2c21-data-clk-state { 3451 pins = "gpio80", "gpio81"; 3452 function = "qup21"; 3453 }; 3454 3455 qup_spi0_cs: qup-spi0-cs-state { 3456 pins = "gpio3"; 3457 function = "qup0"; 3458 }; 3459 3460 qup_spi0_data_clk: qup-spi0-data-clk-state { 3461 pins = "gpio0", "gpio1", "gpio2"; 3462 function = "qup0"; 3463 }; 3464 3465 qup_spi1_cs: qup-spi1-cs-state { 3466 pins = "gpio7"; 3467 function = "qup1"; 3468 }; 3469 3470 qup_spi1_data_clk: qup-spi1-data-clk-state { 3471 pins = "gpio4", "gpio5", "gpio6"; 3472 function = "qup1"; 3473 }; 3474 3475 qup_spi2_cs: qup-spi2-cs-state { 3476 pins = "gpio11"; 3477 function = "qup2"; 3478 }; 3479 3480 qup_spi2_data_clk: qup-spi2-data-clk-state { 3481 pins = "gpio8", "gpio9", "gpio10"; 3482 function = "qup2"; 3483 }; 3484 3485 qup_spi3_cs: qup-spi3-cs-state { 3486 pins = "gpio15"; 3487 function = "qup3"; 3488 }; 3489 3490 qup_spi3_data_clk: qup-spi3-data-clk-state { 3491 pins = "gpio12", "gpio13", "gpio14"; 3492 function = "qup3"; 3493 }; 3494 3495 qup_spi4_cs: qup-spi4-cs-state { 3496 pins = "gpio19"; 3497 function = "qup4"; 3498 drive-strength = <6>; 3499 bias-disable; 3500 }; 3501 3502 qup_spi4_data_clk: qup-spi4-data-clk-state { 3503 pins = "gpio16", "gpio17", "gpio18"; 3504 function = "qup4"; 3505 }; 3506 3507 qup_spi5_cs: qup-spi5-cs-state { 3508 pins = "gpio85"; 3509 function = "qup5"; 3510 }; 3511 3512 qup_spi5_data_clk: qup-spi5-data-clk-state { 3513 pins = "gpio206", "gpio207", "gpio84"; 3514 function = "qup5"; 3515 }; 3516 3517 qup_spi6_cs: qup-spi6-cs-state { 3518 pins = "gpio23"; 3519 function = "qup6"; 3520 }; 3521 3522 qup_spi6_data_clk: qup-spi6-data-clk-state { 3523 pins = "gpio20", "gpio21", "gpio22"; 3524 function = "qup6"; 3525 }; 3526 3527 qup_spi8_cs: qup-spi8-cs-state { 3528 pins = "gpio31"; 3529 function = "qup8"; 3530 }; 3531 3532 qup_spi8_data_clk: qup-spi8-data-clk-state { 3533 pins = "gpio28", "gpio29", "gpio30"; 3534 function = "qup8"; 3535 }; 3536 3537 qup_spi9_cs: qup-spi9-cs-state { 3538 pins = "gpio35"; 3539 function = "qup9"; 3540 }; 3541 3542 qup_spi9_data_clk: qup-spi9-data-clk-state { 3543 pins = "gpio32", "gpio33", "gpio34"; 3544 function = "qup9"; 3545 }; 3546 3547 qup_spi10_cs: qup-spi10-cs-state { 3548 pins = "gpio39"; 3549 function = "qup10"; 3550 }; 3551 3552 qup_spi10_data_clk: qup-spi10-data-clk-state { 3553 pins = "gpio36", "gpio37", "gpio38"; 3554 function = "qup10"; 3555 }; 3556 3557 qup_spi11_cs: qup-spi11-cs-state { 3558 pins = "gpio43"; 3559 function = "qup11"; 3560 }; 3561 3562 qup_spi11_data_clk: qup-spi11-data-clk-state { 3563 pins = "gpio40", "gpio41", "gpio42"; 3564 function = "qup11"; 3565 }; 3566 3567 qup_spi12_cs: qup-spi12-cs-state { 3568 pins = "gpio47"; 3569 function = "qup12"; 3570 }; 3571 3572 qup_spi12_data_clk: qup-spi12-data-clk-state { 3573 pins = "gpio44", "gpio45", "gpio46"; 3574 function = "qup12"; 3575 }; 3576 3577 qup_spi13_cs: qup-spi13-cs-state { 3578 pins = "gpio51"; 3579 function = "qup13"; 3580 }; 3581 3582 qup_spi13_data_clk: qup-spi13-data-clk-state { 3583 pins = "gpio48", "gpio49", "gpio50"; 3584 function = "qup13"; 3585 }; 3586 3587 qup_spi14_cs: qup-spi14-cs-state { 3588 pins = "gpio55"; 3589 function = "qup14"; 3590 }; 3591 3592 qup_spi14_data_clk: qup-spi14-data-clk-state { 3593 pins = "gpio52", "gpio53", "gpio54"; 3594 function = "qup14"; 3595 }; 3596 3597 qup_spi15_cs: qup-spi15-cs-state { 3598 pins = "gpio59"; 3599 function = "qup15"; 3600 }; 3601 3602 qup_spi15_data_clk: qup-spi15-data-clk-state { 3603 pins = "gpio56", "gpio57", "gpio58"; 3604 function = "qup15"; 3605 }; 3606 3607 qup_spi16_cs: qup-spi16-cs-state { 3608 pins = "gpio63"; 3609 function = "qup16"; 3610 }; 3611 3612 qup_spi16_data_clk: qup-spi16-data-clk-state { 3613 pins = "gpio60", "gpio61", "gpio62"; 3614 function = "qup16"; 3615 }; 3616 3617 qup_spi17_cs: qup-spi17-cs-state { 3618 pins = "gpio67"; 3619 function = "qup17"; 3620 }; 3621 3622 qup_spi17_data_clk: qup-spi17-data-clk-state { 3623 pins = "gpio64", "gpio65", "gpio66"; 3624 function = "qup17"; 3625 }; 3626 3627 qup_spi18_cs: qup-spi18-cs-state { 3628 pins = "gpio71"; 3629 function = "qup18"; 3630 drive-strength = <6>; 3631 bias-disable; 3632 }; 3633 3634 qup_spi18_data_clk: qup-spi18-data-clk-state { 3635 pins = "gpio68", "gpio69", "gpio70"; 3636 function = "qup18"; 3637 drive-strength = <6>; 3638 bias-disable; 3639 }; 3640 3641 qup_spi19_cs: qup-spi19-cs-state { 3642 pins = "gpio75"; 3643 function = "qup19"; 3644 drive-strength = <6>; 3645 bias-disable; 3646 }; 3647 3648 qup_spi19_data_clk: qup-spi19-data-clk-state { 3649 pins = "gpio72", "gpio73", "gpio74"; 3650 function = "qup19"; 3651 drive-strength = <6>; 3652 bias-disable; 3653 }; 3654 3655 qup_spi20_cs: qup-spi20-cs-state { 3656 pins = "gpio79"; 3657 function = "qup20"; 3658 }; 3659 3660 qup_spi20_data_clk: qup-spi20-data-clk-state { 3661 pins = "gpio76", "gpio77", "gpio78"; 3662 function = "qup20"; 3663 }; 3664 3665 qup_spi21_cs: qup-spi21-cs-state { 3666 pins = "gpio83"; 3667 function = "qup21"; 3668 }; 3669 3670 qup_spi21_data_clk: qup-spi21-data-clk-state { 3671 pins = "gpio80", "gpio81", "gpio82"; 3672 function = "qup21"; 3673 }; 3674 3675 qup_uart7_rx: qup-uart7-rx-state { 3676 pins = "gpio26"; 3677 function = "qup7"; 3678 drive-strength = <2>; 3679 bias-disable; 3680 }; 3681 3682 qup_uart7_tx: qup-uart7-tx-state { 3683 pins = "gpio27"; 3684 function = "qup7"; 3685 drive-strength = <2>; 3686 bias-disable; 3687 }; 3688 3689 qup_uart20_default: qup-uart20-default-state { 3690 pins = "gpio76", "gpio77", "gpio78", "gpio79"; 3691 function = "qup20"; 3692 }; 3693 }; 3694 3695 lpass_tlmm: pinctrl@3440000 { 3696 compatible = "qcom,sm8450-lpass-lpi-pinctrl"; 3697 reg = <0 0x03440000 0x0 0x20000>, 3698 <0 0x034d0000 0x0 0x10000>; 3699 gpio-controller; 3700 #gpio-cells = <2>; 3701 gpio-ranges = <&lpass_tlmm 0 0 23>; 3702 3703 clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, 3704 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; 3705 clock-names = "core", "audio"; 3706 3707 tx_swr_active: tx-swr-active-state { 3708 clk-pins { 3709 pins = "gpio0"; 3710 function = "swr_tx_clk"; 3711 drive-strength = <2>; 3712 slew-rate = <1>; 3713 bias-disable; 3714 }; 3715 3716 data-pins { 3717 pins = "gpio1", "gpio2", "gpio14"; 3718 function = "swr_tx_data"; 3719 drive-strength = <2>; 3720 slew-rate = <1>; 3721 bias-bus-hold; 3722 }; 3723 }; 3724 3725 rx_swr_active: rx-swr-active-state { 3726 clk-pins { 3727 pins = "gpio3"; 3728 function = "swr_rx_clk"; 3729 drive-strength = <2>; 3730 slew-rate = <1>; 3731 bias-disable; 3732 }; 3733 3734 data-pins { 3735 pins = "gpio4", "gpio5"; 3736 function = "swr_rx_data"; 3737 drive-strength = <2>; 3738 slew-rate = <1>; 3739 bias-bus-hold; 3740 }; 3741 }; 3742 3743 dmic01_default: dmic01-default-state { 3744 clk-pins { 3745 pins = "gpio6"; 3746 function = "dmic1_clk"; 3747 drive-strength = <8>; 3748 output-high; 3749 }; 3750 3751 data-pins { 3752 pins = "gpio7"; 3753 function = "dmic1_data"; 3754 drive-strength = <8>; 3755 }; 3756 }; 3757 3758 dmic02_default: dmic02-default-state { 3759 clk-pins { 3760 pins = "gpio8"; 3761 function = "dmic2_clk"; 3762 drive-strength = <8>; 3763 output-high; 3764 }; 3765 3766 data-pins { 3767 pins = "gpio9"; 3768 function = "dmic2_data"; 3769 drive-strength = <8>; 3770 }; 3771 }; 3772 3773 wsa_swr_active: wsa-swr-active-state { 3774 clk-pins { 3775 pins = "gpio10"; 3776 function = "wsa_swr_clk"; 3777 drive-strength = <2>; 3778 slew-rate = <1>; 3779 bias-disable; 3780 }; 3781 3782 data-pins { 3783 pins = "gpio11"; 3784 function = "wsa_swr_data"; 3785 drive-strength = <2>; 3786 slew-rate = <1>; 3787 bias-bus-hold; 3788 }; 3789 }; 3790 3791 wsa2_swr_active: wsa2-swr-active-state { 3792 clk-pins { 3793 pins = "gpio15"; 3794 function = "wsa2_swr_clk"; 3795 drive-strength = <2>; 3796 slew-rate = <1>; 3797 bias-disable; 3798 }; 3799 3800 data-pins { 3801 pins = "gpio16"; 3802 function = "wsa2_swr_data"; 3803 drive-strength = <2>; 3804 slew-rate = <1>; 3805 bias-bus-hold; 3806 }; 3807 }; 3808 }; 3809 3810 sram@146aa000 { 3811 compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; 3812 reg = <0 0x146aa000 0 0x1000>; 3813 ranges = <0 0 0x146aa000 0x1000>; 3814 3815 #address-cells = <1>; 3816 #size-cells = <1>; 3817 3818 pil-reloc@94c { 3819 compatible = "qcom,pil-reloc-info"; 3820 reg = <0x94c 0xc8>; 3821 }; 3822 }; 3823 3824 apps_smmu: iommu@15000000 { 3825 compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; 3826 reg = <0 0x15000000 0 0x100000>; 3827 #iommu-cells = <2>; 3828 #global-interrupts = <1>; 3829 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, 3830 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, 3831 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 3832 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, 3833 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, 3834 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, 3835 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, 3836 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, 3837 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, 3838 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, 3839 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, 3840 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, 3841 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, 3842 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 3843 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 3844 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, 3845 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, 3846 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, 3847 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, 3848 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, 3849 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 3850 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, 3851 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 3852 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 3853 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, 3854 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, 3855 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 3856 <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, 3857 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, 3858 <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, 3859 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, 3860 <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 3861 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, 3862 <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, 3863 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, 3864 <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, 3865 <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, 3866 <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, 3867 <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, 3868 <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, 3869 <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, 3870 <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, 3871 <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, 3872 <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, 3873 <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, 3874 <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, 3875 <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, 3876 <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, 3877 <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, 3878 <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, 3879 <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, 3880 <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, 3881 <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, 3882 <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, 3883 <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, 3884 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, 3885 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, 3886 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, 3887 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, 3888 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, 3889 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, 3890 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, 3891 <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, 3892 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, 3893 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, 3894 <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, 3895 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, 3896 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, 3897 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, 3898 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, 3899 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, 3900 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, 3901 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, 3902 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, 3903 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, 3904 <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, 3905 <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, 3906 <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, 3907 <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, 3908 <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, 3909 <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, 3910 <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, 3911 <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, 3912 <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, 3913 <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, 3914 <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, 3915 <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, 3916 <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, 3917 <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, 3918 <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, 3919 <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, 3920 <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, 3921 <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, 3922 <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, 3923 <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, 3924 <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, 3925 <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; 3926 }; 3927 3928 intc: interrupt-controller@17100000 { 3929 compatible = "arm,gic-v3"; 3930 #interrupt-cells = <3>; 3931 interrupt-controller; 3932 #redistributor-regions = <1>; 3933 redistributor-stride = <0x0 0x40000>; 3934 reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */ 3935 <0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */ 3936 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 3937 #address-cells = <2>; 3938 #size-cells = <2>; 3939 ranges; 3940 3941 gic_its: msi-controller@17140000 { 3942 compatible = "arm,gic-v3-its"; 3943 reg = <0x0 0x17140000 0x0 0x20000>; 3944 msi-controller; 3945 #msi-cells = <1>; 3946 }; 3947 }; 3948 3949 timer@17420000 { 3950 compatible = "arm,armv7-timer-mem"; 3951 #address-cells = <1>; 3952 #size-cells = <1>; 3953 ranges = <0 0 0 0x20000000>; 3954 reg = <0x0 0x17420000 0x0 0x1000>; 3955 clock-frequency = <19200000>; 3956 3957 frame@17421000 { 3958 frame-number = <0>; 3959 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 3960 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 3961 reg = <0x17421000 0x1000>, 3962 <0x17422000 0x1000>; 3963 }; 3964 3965 frame@17423000 { 3966 frame-number = <1>; 3967 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 3968 reg = <0x17423000 0x1000>; 3969 status = "disabled"; 3970 }; 3971 3972 frame@17425000 { 3973 frame-number = <2>; 3974 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 3975 reg = <0x17425000 0x1000>; 3976 status = "disabled"; 3977 }; 3978 3979 frame@17427000 { 3980 frame-number = <3>; 3981 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 3982 reg = <0x17427000 0x1000>; 3983 status = "disabled"; 3984 }; 3985 3986 frame@17429000 { 3987 frame-number = <4>; 3988 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 3989 reg = <0x17429000 0x1000>; 3990 status = "disabled"; 3991 }; 3992 3993 frame@1742b000 { 3994 frame-number = <5>; 3995 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 3996 reg = <0x1742b000 0x1000>; 3997 status = "disabled"; 3998 }; 3999 4000 frame@1742d000 { 4001 frame-number = <6>; 4002 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 4003 reg = <0x1742d000 0x1000>; 4004 status = "disabled"; 4005 }; 4006 }; 4007 4008 apps_rsc: rsc@17a00000 { 4009 label = "apps_rsc"; 4010 compatible = "qcom,rpmh-rsc"; 4011 reg = <0x0 0x17a00000 0x0 0x10000>, 4012 <0x0 0x17a10000 0x0 0x10000>, 4013 <0x0 0x17a20000 0x0 0x10000>, 4014 <0x0 0x17a30000 0x0 0x10000>; 4015 reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; 4016 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, 4017 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, 4018 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 4019 qcom,tcs-offset = <0xd00>; 4020 qcom,drv-id = <2>; 4021 qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, 4022 <WAKE_TCS 2>, <CONTROL_TCS 0>; 4023 power-domains = <&CLUSTER_PD>; 4024 4025 apps_bcm_voter: bcm-voter { 4026 compatible = "qcom,bcm-voter"; 4027 }; 4028 4029 rpmhcc: clock-controller { 4030 compatible = "qcom,sm8450-rpmh-clk"; 4031 #clock-cells = <1>; 4032 clock-names = "xo"; 4033 clocks = <&xo_board>; 4034 }; 4035 4036 rpmhpd: power-controller { 4037 compatible = "qcom,sm8450-rpmhpd"; 4038 #power-domain-cells = <1>; 4039 operating-points-v2 = <&rpmhpd_opp_table>; 4040 4041 rpmhpd_opp_table: opp-table { 4042 compatible = "operating-points-v2"; 4043 4044 rpmhpd_opp_ret: opp1 { 4045 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; 4046 }; 4047 4048 rpmhpd_opp_min_svs: opp2 { 4049 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; 4050 }; 4051 4052 rpmhpd_opp_low_svs_d1: opp3 { 4053 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; 4054 }; 4055 4056 rpmhpd_opp_low_svs: opp4 { 4057 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; 4058 }; 4059 4060 rpmhpd_opp_low_svs_l1: opp5 { 4061 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; 4062 }; 4063 4064 rpmhpd_opp_svs: opp6 { 4065 opp-level = <RPMH_REGULATOR_LEVEL_SVS>; 4066 }; 4067 4068 rpmhpd_opp_svs_l0: opp7 { 4069 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; 4070 }; 4071 4072 rpmhpd_opp_svs_l1: opp8 { 4073 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; 4074 }; 4075 4076 rpmhpd_opp_svs_l2: opp9 { 4077 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; 4078 }; 4079 4080 rpmhpd_opp_nom: opp10 { 4081 opp-level = <RPMH_REGULATOR_LEVEL_NOM>; 4082 }; 4083 4084 rpmhpd_opp_nom_l1: opp11 { 4085 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; 4086 }; 4087 4088 rpmhpd_opp_nom_l2: opp12 { 4089 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; 4090 }; 4091 4092 rpmhpd_opp_turbo: opp13 { 4093 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; 4094 }; 4095 4096 rpmhpd_opp_turbo_l1: opp14 { 4097 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; 4098 }; 4099 }; 4100 }; 4101 }; 4102 4103 cpufreq_hw: cpufreq@17d91000 { 4104 compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss"; 4105 reg = <0 0x17d91000 0 0x1000>, 4106 <0 0x17d92000 0 0x1000>, 4107 <0 0x17d93000 0 0x1000>; 4108 reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; 4109 clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; 4110 clock-names = "xo", "alternate"; 4111 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, 4112 <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, 4113 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; 4114 interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; 4115 #freq-domain-cells = <1>; 4116 #clock-cells = <1>; 4117 }; 4118 4119 gem_noc: interconnect@19100000 { 4120 compatible = "qcom,sm8450-gem-noc"; 4121 reg = <0 0x19100000 0 0xbb800>; 4122 #interconnect-cells = <2>; 4123 qcom,bcm-voters = <&apps_bcm_voter>; 4124 }; 4125 4126 system-cache-controller@19200000 { 4127 compatible = "qcom,sm8450-llcc"; 4128 reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, 4129 <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, 4130 <0 0x19a00000 0 0x80000>; 4131 reg-names = "llcc0_base", "llcc1_base", "llcc2_base", 4132 "llcc3_base", "llcc_broadcast_base"; 4133 interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; 4134 }; 4135 4136 ufs_mem_hc: ufshc@1d84000 { 4137 compatible = "qcom,sm8450-ufshc", "qcom,ufshc", 4138 "jedec,ufs-2.0"; 4139 reg = <0 0x01d84000 0 0x3000>; 4140 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; 4141 phys = <&ufs_mem_phy_lanes>; 4142 phy-names = "ufsphy"; 4143 lanes-per-direction = <2>; 4144 #reset-cells = <1>; 4145 resets = <&gcc GCC_UFS_PHY_BCR>; 4146 reset-names = "rst"; 4147 4148 power-domains = <&gcc UFS_PHY_GDSC>; 4149 4150 iommus = <&apps_smmu 0xe0 0x0>; 4151 dma-coherent; 4152 4153 interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, 4154 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; 4155 interconnect-names = "ufs-ddr", "cpu-ufs"; 4156 clock-names = 4157 "core_clk", 4158 "bus_aggr_clk", 4159 "iface_clk", 4160 "core_clk_unipro", 4161 "ref_clk", 4162 "tx_lane0_sync_clk", 4163 "rx_lane0_sync_clk", 4164 "rx_lane1_sync_clk"; 4165 clocks = 4166 <&gcc GCC_UFS_PHY_AXI_CLK>, 4167 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, 4168 <&gcc GCC_UFS_PHY_AHB_CLK>, 4169 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, 4170 <&rpmhcc RPMH_CXO_CLK>, 4171 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, 4172 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, 4173 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; 4174 freq-table-hz = 4175 <75000000 300000000>, 4176 <0 0>, 4177 <0 0>, 4178 <75000000 300000000>, 4179 <75000000 300000000>, 4180 <0 0>, 4181 <0 0>, 4182 <0 0>; 4183 qcom,ice = <&ice>; 4184 4185 status = "disabled"; 4186 }; 4187 4188 ufs_mem_phy: phy@1d87000 { 4189 compatible = "qcom,sm8450-qmp-ufs-phy"; 4190 reg = <0 0x01d87000 0 0x1c4>; 4191 #address-cells = <2>; 4192 #size-cells = <2>; 4193 ranges; 4194 clock-names = "ref", "ref_aux", "qref"; 4195 clocks = <&rpmhcc RPMH_CXO_CLK>, 4196 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, 4197 <&gcc GCC_UFS_0_CLKREF_EN>; 4198 4199 resets = <&ufs_mem_hc 0>; 4200 reset-names = "ufsphy"; 4201 status = "disabled"; 4202 4203 ufs_mem_phy_lanes: phy@1d87400 { 4204 reg = <0 0x01d87400 0 0x188>, 4205 <0 0x01d87600 0 0x200>, 4206 <0 0x01d87c00 0 0x200>, 4207 <0 0x01d87800 0 0x188>, 4208 <0 0x01d87a00 0 0x200>; 4209 #clock-cells = <1>; 4210 #phy-cells = <0>; 4211 }; 4212 }; 4213 4214 ice: crypto@1d88000 { 4215 compatible = "qcom,sm8450-inline-crypto-engine", 4216 "qcom,inline-crypto-engine"; 4217 reg = <0 0x01d88000 0 0x8000>; 4218 clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; 4219 }; 4220 4221 cryptobam: dma-controller@1dc4000 { 4222 compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; 4223 reg = <0 0x01dc4000 0 0x28000>; 4224 interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; 4225 #dma-cells = <1>; 4226 qcom,ee = <0>; 4227 qcom,controlled-remotely; 4228 iommus = <&apps_smmu 0x584 0x11>, 4229 <&apps_smmu 0x588 0x0>, 4230 <&apps_smmu 0x598 0x5>, 4231 <&apps_smmu 0x59a 0x0>, 4232 <&apps_smmu 0x59f 0x0>; 4233 }; 4234 4235 crypto: crypto@1dfa000 { 4236 compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce"; 4237 reg = <0 0x01dfa000 0 0x6000>; 4238 dmas = <&cryptobam 4>, <&cryptobam 5>; 4239 dma-names = "rx", "tx"; 4240 iommus = <&apps_smmu 0x584 0x11>, 4241 <&apps_smmu 0x588 0x0>, 4242 <&apps_smmu 0x598 0x5>, 4243 <&apps_smmu 0x59a 0x0>, 4244 <&apps_smmu 0x59f 0x0>; 4245 interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; 4246 interconnect-names = "memory"; 4247 }; 4248 4249 sdhc_2: mmc@8804000 { 4250 compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; 4251 reg = <0 0x08804000 0 0x1000>; 4252 4253 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, 4254 <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; 4255 interrupt-names = "hc_irq", "pwr_irq"; 4256 4257 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 4258 <&gcc GCC_SDCC2_APPS_CLK>, 4259 <&rpmhcc RPMH_CXO_CLK>; 4260 clock-names = "iface", "core", "xo"; 4261 resets = <&gcc GCC_SDCC2_BCR>; 4262 interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, 4263 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; 4264 interconnect-names = "sdhc-ddr","cpu-sdhc"; 4265 iommus = <&apps_smmu 0x4a0 0x0>; 4266 power-domains = <&rpmhpd RPMHPD_CX>; 4267 operating-points-v2 = <&sdhc2_opp_table>; 4268 bus-width = <4>; 4269 dma-coherent; 4270 4271 /* Forbid SDR104/SDR50 - broken hw! */ 4272 sdhci-caps-mask = <0x3 0x0>; 4273 4274 status = "disabled"; 4275 4276 sdhc2_opp_table: opp-table { 4277 compatible = "operating-points-v2"; 4278 4279 opp-100000000 { 4280 opp-hz = /bits/ 64 <100000000>; 4281 required-opps = <&rpmhpd_opp_low_svs>; 4282 }; 4283 4284 opp-202000000 { 4285 opp-hz = /bits/ 64 <202000000>; 4286 required-opps = <&rpmhpd_opp_svs_l1>; 4287 }; 4288 }; 4289 }; 4290 4291 usb_1: usb@a6f8800 { 4292 compatible = "qcom,sm8450-dwc3", "qcom,dwc3"; 4293 reg = <0 0x0a6f8800 0 0x400>; 4294 status = "disabled"; 4295 #address-cells = <2>; 4296 #size-cells = <2>; 4297 ranges; 4298 4299 clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, 4300 <&gcc GCC_USB30_PRIM_MASTER_CLK>, 4301 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, 4302 <&gcc GCC_USB30_PRIM_SLEEP_CLK>, 4303 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, 4304 <&gcc GCC_USB3_0_CLKREF_EN>; 4305 clock-names = "cfg_noc", 4306 "core", 4307 "iface", 4308 "sleep", 4309 "mock_utmi", 4310 "xo"; 4311 4312 assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, 4313 <&gcc GCC_USB30_PRIM_MASTER_CLK>; 4314 assigned-clock-rates = <19200000>, <200000000>; 4315 4316 interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, 4317 <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, 4318 <&pdc 15 IRQ_TYPE_EDGE_BOTH>, 4319 <&pdc 14 IRQ_TYPE_EDGE_BOTH>; 4320 interrupt-names = "hs_phy_irq", 4321 "ss_phy_irq", 4322 "dm_hs_phy_irq", 4323 "dp_hs_phy_irq"; 4324 4325 power-domains = <&gcc USB30_PRIM_GDSC>; 4326 4327 resets = <&gcc GCC_USB30_PRIM_BCR>; 4328 4329 interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, 4330 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; 4331 interconnect-names = "usb-ddr", "apps-usb"; 4332 4333 usb_1_dwc3: usb@a600000 { 4334 compatible = "snps,dwc3"; 4335 reg = <0 0x0a600000 0 0xcd00>; 4336 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 4337 iommus = <&apps_smmu 0x0 0x0>; 4338 snps,dis_u2_susphy_quirk; 4339 snps,dis_enblslpm_quirk; 4340 phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; 4341 phy-names = "usb2-phy", "usb3-phy"; 4342 4343 ports { 4344 #address-cells = <1>; 4345 #size-cells = <0>; 4346 4347 port@0 { 4348 reg = <0>; 4349 4350 usb_1_dwc3_hs: endpoint { 4351 }; 4352 }; 4353 4354 port@1 { 4355 reg = <1>; 4356 4357 usb_1_dwc3_ss: endpoint { 4358 }; 4359 }; 4360 }; 4361 }; 4362 }; 4363 4364 nsp_noc: interconnect@320c0000 { 4365 compatible = "qcom,sm8450-nsp-noc"; 4366 reg = <0 0x320c0000 0 0x10000>; 4367 #interconnect-cells = <2>; 4368 qcom,bcm-voters = <&apps_bcm_voter>; 4369 }; 4370 4371 lpass_ag_noc: interconnect@3c40000 { 4372 compatible = "qcom,sm8450-lpass-ag-noc"; 4373 reg = <0 0x03c40000 0 0x17200>; 4374 #interconnect-cells = <2>; 4375 qcom,bcm-voters = <&apps_bcm_voter>; 4376 }; 4377 }; 4378 4379 sound: sound { 4380 }; 4381 4382 thermal-zones { 4383 aoss0-thermal { 4384 polling-delay-passive = <0>; 4385 polling-delay = <0>; 4386 thermal-sensors = <&tsens0 0>; 4387 4388 trips { 4389 thermal-engine-config { 4390 temperature = <125000>; 4391 hysteresis = <1000>; 4392 type = "passive"; 4393 }; 4394 4395 reset-mon-cfg { 4396 temperature = <115000>; 4397 hysteresis = <5000>; 4398 type = "passive"; 4399 }; 4400 }; 4401 }; 4402 4403 cpuss0-thermal { 4404 polling-delay-passive = <0>; 4405 polling-delay = <0>; 4406 thermal-sensors = <&tsens0 1>; 4407 4408 trips { 4409 thermal-engine-config { 4410 temperature = <125000>; 4411 hysteresis = <1000>; 4412 type = "passive"; 4413 }; 4414 4415 reset-mon-cfg { 4416 temperature = <115000>; 4417 hysteresis = <5000>; 4418 type = "passive"; 4419 }; 4420 }; 4421 }; 4422 4423 cpuss1-thermal { 4424 polling-delay-passive = <0>; 4425 polling-delay = <0>; 4426 thermal-sensors = <&tsens0 2>; 4427 4428 trips { 4429 thermal-engine-config { 4430 temperature = <125000>; 4431 hysteresis = <1000>; 4432 type = "passive"; 4433 }; 4434 4435 reset-mon-cfg { 4436 temperature = <115000>; 4437 hysteresis = <5000>; 4438 type = "passive"; 4439 }; 4440 }; 4441 }; 4442 4443 cpuss3-thermal { 4444 polling-delay-passive = <0>; 4445 polling-delay = <0>; 4446 thermal-sensors = <&tsens0 3>; 4447 4448 trips { 4449 thermal-engine-config { 4450 temperature = <125000>; 4451 hysteresis = <1000>; 4452 type = "passive"; 4453 }; 4454 4455 reset-mon-cfg { 4456 temperature = <115000>; 4457 hysteresis = <5000>; 4458 type = "passive"; 4459 }; 4460 }; 4461 }; 4462 4463 cpuss4-thermal { 4464 polling-delay-passive = <0>; 4465 polling-delay = <0>; 4466 thermal-sensors = <&tsens0 4>; 4467 4468 trips { 4469 thermal-engine-config { 4470 temperature = <125000>; 4471 hysteresis = <1000>; 4472 type = "passive"; 4473 }; 4474 4475 reset-mon-cfg { 4476 temperature = <115000>; 4477 hysteresis = <5000>; 4478 type = "passive"; 4479 }; 4480 }; 4481 }; 4482 4483 cpu4-top-thermal { 4484 polling-delay-passive = <0>; 4485 polling-delay = <0>; 4486 thermal-sensors = <&tsens0 5>; 4487 4488 trips { 4489 cpu4_top_alert0: trip-point0 { 4490 temperature = <90000>; 4491 hysteresis = <2000>; 4492 type = "passive"; 4493 }; 4494 4495 cpu4_top_alert1: trip-point1 { 4496 temperature = <95000>; 4497 hysteresis = <2000>; 4498 type = "passive"; 4499 }; 4500 4501 cpu4_top_crit: cpu-crit { 4502 temperature = <110000>; 4503 hysteresis = <1000>; 4504 type = "critical"; 4505 }; 4506 }; 4507 }; 4508 4509 cpu4-bottom-thermal { 4510 polling-delay-passive = <0>; 4511 polling-delay = <0>; 4512 thermal-sensors = <&tsens0 6>; 4513 4514 trips { 4515 cpu4_bottom_alert0: trip-point0 { 4516 temperature = <90000>; 4517 hysteresis = <2000>; 4518 type = "passive"; 4519 }; 4520 4521 cpu4_bottom_alert1: trip-point1 { 4522 temperature = <95000>; 4523 hysteresis = <2000>; 4524 type = "passive"; 4525 }; 4526 4527 cpu4_bottom_crit: cpu-crit { 4528 temperature = <110000>; 4529 hysteresis = <1000>; 4530 type = "critical"; 4531 }; 4532 }; 4533 }; 4534 4535 cpu5-top-thermal { 4536 polling-delay-passive = <0>; 4537 polling-delay = <0>; 4538 thermal-sensors = <&tsens0 7>; 4539 4540 trips { 4541 cpu5_top_alert0: trip-point0 { 4542 temperature = <90000>; 4543 hysteresis = <2000>; 4544 type = "passive"; 4545 }; 4546 4547 cpu5_top_alert1: trip-point1 { 4548 temperature = <95000>; 4549 hysteresis = <2000>; 4550 type = "passive"; 4551 }; 4552 4553 cpu5_top_crit: cpu-crit { 4554 temperature = <110000>; 4555 hysteresis = <1000>; 4556 type = "critical"; 4557 }; 4558 }; 4559 }; 4560 4561 cpu5-bottom-thermal { 4562 polling-delay-passive = <0>; 4563 polling-delay = <0>; 4564 thermal-sensors = <&tsens0 8>; 4565 4566 trips { 4567 cpu5_bottom_alert0: trip-point0 { 4568 temperature = <90000>; 4569 hysteresis = <2000>; 4570 type = "passive"; 4571 }; 4572 4573 cpu5_bottom_alert1: trip-point1 { 4574 temperature = <95000>; 4575 hysteresis = <2000>; 4576 type = "passive"; 4577 }; 4578 4579 cpu5_bottom_crit: cpu-crit { 4580 temperature = <110000>; 4581 hysteresis = <1000>; 4582 type = "critical"; 4583 }; 4584 }; 4585 }; 4586 4587 cpu6-top-thermal { 4588 polling-delay-passive = <0>; 4589 polling-delay = <0>; 4590 thermal-sensors = <&tsens0 9>; 4591 4592 trips { 4593 cpu6_top_alert0: trip-point0 { 4594 temperature = <90000>; 4595 hysteresis = <2000>; 4596 type = "passive"; 4597 }; 4598 4599 cpu6_top_alert1: trip-point1 { 4600 temperature = <95000>; 4601 hysteresis = <2000>; 4602 type = "passive"; 4603 }; 4604 4605 cpu6_top_crit: cpu-crit { 4606 temperature = <110000>; 4607 hysteresis = <1000>; 4608 type = "critical"; 4609 }; 4610 }; 4611 }; 4612 4613 cpu6-bottom-thermal { 4614 polling-delay-passive = <0>; 4615 polling-delay = <0>; 4616 thermal-sensors = <&tsens0 10>; 4617 4618 trips { 4619 cpu6_bottom_alert0: trip-point0 { 4620 temperature = <90000>; 4621 hysteresis = <2000>; 4622 type = "passive"; 4623 }; 4624 4625 cpu6_bottom_alert1: trip-point1 { 4626 temperature = <95000>; 4627 hysteresis = <2000>; 4628 type = "passive"; 4629 }; 4630 4631 cpu6_bottom_crit: cpu-crit { 4632 temperature = <110000>; 4633 hysteresis = <1000>; 4634 type = "critical"; 4635 }; 4636 }; 4637 }; 4638 4639 cpu7-top-thermal { 4640 polling-delay-passive = <0>; 4641 polling-delay = <0>; 4642 thermal-sensors = <&tsens0 11>; 4643 4644 trips { 4645 cpu7_top_alert0: trip-point0 { 4646 temperature = <90000>; 4647 hysteresis = <2000>; 4648 type = "passive"; 4649 }; 4650 4651 cpu7_top_alert1: trip-point1 { 4652 temperature = <95000>; 4653 hysteresis = <2000>; 4654 type = "passive"; 4655 }; 4656 4657 cpu7_top_crit: cpu-crit { 4658 temperature = <110000>; 4659 hysteresis = <1000>; 4660 type = "critical"; 4661 }; 4662 }; 4663 }; 4664 4665 cpu7-middle-thermal { 4666 polling-delay-passive = <0>; 4667 polling-delay = <0>; 4668 thermal-sensors = <&tsens0 12>; 4669 4670 trips { 4671 cpu7_middle_alert0: trip-point0 { 4672 temperature = <90000>; 4673 hysteresis = <2000>; 4674 type = "passive"; 4675 }; 4676 4677 cpu7_middle_alert1: trip-point1 { 4678 temperature = <95000>; 4679 hysteresis = <2000>; 4680 type = "passive"; 4681 }; 4682 4683 cpu7_middle_crit: cpu-crit { 4684 temperature = <110000>; 4685 hysteresis = <1000>; 4686 type = "critical"; 4687 }; 4688 }; 4689 }; 4690 4691 cpu7-bottom-thermal { 4692 polling-delay-passive = <0>; 4693 polling-delay = <0>; 4694 thermal-sensors = <&tsens0 13>; 4695 4696 trips { 4697 cpu7_bottom_alert0: trip-point0 { 4698 temperature = <90000>; 4699 hysteresis = <2000>; 4700 type = "passive"; 4701 }; 4702 4703 cpu7_bottom_alert1: trip-point1 { 4704 temperature = <95000>; 4705 hysteresis = <2000>; 4706 type = "passive"; 4707 }; 4708 4709 cpu7_bottom_crit: cpu-crit { 4710 temperature = <110000>; 4711 hysteresis = <1000>; 4712 type = "critical"; 4713 }; 4714 }; 4715 }; 4716 4717 gpu-top-thermal { 4718 polling-delay-passive = <10>; 4719 polling-delay = <0>; 4720 thermal-sensors = <&tsens0 14>; 4721 4722 trips { 4723 thermal-engine-config { 4724 temperature = <125000>; 4725 hysteresis = <1000>; 4726 type = "passive"; 4727 }; 4728 4729 thermal-hal-config { 4730 temperature = <125000>; 4731 hysteresis = <1000>; 4732 type = "passive"; 4733 }; 4734 4735 reset-mon-cfg { 4736 temperature = <115000>; 4737 hysteresis = <5000>; 4738 type = "passive"; 4739 }; 4740 4741 gpu0_tj_cfg: tj-cfg { 4742 temperature = <95000>; 4743 hysteresis = <5000>; 4744 type = "passive"; 4745 }; 4746 }; 4747 }; 4748 4749 gpu-bottom-thermal { 4750 polling-delay-passive = <10>; 4751 polling-delay = <0>; 4752 thermal-sensors = <&tsens0 15>; 4753 4754 trips { 4755 thermal-engine-config { 4756 temperature = <125000>; 4757 hysteresis = <1000>; 4758 type = "passive"; 4759 }; 4760 4761 thermal-hal-config { 4762 temperature = <125000>; 4763 hysteresis = <1000>; 4764 type = "passive"; 4765 }; 4766 4767 reset-mon-cfg { 4768 temperature = <115000>; 4769 hysteresis = <5000>; 4770 type = "passive"; 4771 }; 4772 4773 gpu1_tj_cfg: tj-cfg { 4774 temperature = <95000>; 4775 hysteresis = <5000>; 4776 type = "passive"; 4777 }; 4778 }; 4779 }; 4780 4781 aoss1-thermal { 4782 polling-delay-passive = <0>; 4783 polling-delay = <0>; 4784 thermal-sensors = <&tsens1 0>; 4785 4786 trips { 4787 thermal-engine-config { 4788 temperature = <125000>; 4789 hysteresis = <1000>; 4790 type = "passive"; 4791 }; 4792 4793 reset-mon-cfg { 4794 temperature = <115000>; 4795 hysteresis = <5000>; 4796 type = "passive"; 4797 }; 4798 }; 4799 }; 4800 4801 cpu0-thermal { 4802 polling-delay-passive = <0>; 4803 polling-delay = <0>; 4804 thermal-sensors = <&tsens1 1>; 4805 4806 trips { 4807 cpu0_alert0: trip-point0 { 4808 temperature = <90000>; 4809 hysteresis = <2000>; 4810 type = "passive"; 4811 }; 4812 4813 cpu0_alert1: trip-point1 { 4814 temperature = <95000>; 4815 hysteresis = <2000>; 4816 type = "passive"; 4817 }; 4818 4819 cpu0_crit: cpu-crit { 4820 temperature = <110000>; 4821 hysteresis = <1000>; 4822 type = "critical"; 4823 }; 4824 }; 4825 }; 4826 4827 cpu1-thermal { 4828 polling-delay-passive = <0>; 4829 polling-delay = <0>; 4830 thermal-sensors = <&tsens1 2>; 4831 4832 trips { 4833 cpu1_alert0: trip-point0 { 4834 temperature = <90000>; 4835 hysteresis = <2000>; 4836 type = "passive"; 4837 }; 4838 4839 cpu1_alert1: trip-point1 { 4840 temperature = <95000>; 4841 hysteresis = <2000>; 4842 type = "passive"; 4843 }; 4844 4845 cpu1_crit: cpu-crit { 4846 temperature = <110000>; 4847 hysteresis = <1000>; 4848 type = "critical"; 4849 }; 4850 }; 4851 }; 4852 4853 cpu2-thermal { 4854 polling-delay-passive = <0>; 4855 polling-delay = <0>; 4856 thermal-sensors = <&tsens1 3>; 4857 4858 trips { 4859 cpu2_alert0: trip-point0 { 4860 temperature = <90000>; 4861 hysteresis = <2000>; 4862 type = "passive"; 4863 }; 4864 4865 cpu2_alert1: trip-point1 { 4866 temperature = <95000>; 4867 hysteresis = <2000>; 4868 type = "passive"; 4869 }; 4870 4871 cpu2_crit: cpu-crit { 4872 temperature = <110000>; 4873 hysteresis = <1000>; 4874 type = "critical"; 4875 }; 4876 }; 4877 }; 4878 4879 cpu3-thermal { 4880 polling-delay-passive = <0>; 4881 polling-delay = <0>; 4882 thermal-sensors = <&tsens1 4>; 4883 4884 trips { 4885 cpu3_alert0: trip-point0 { 4886 temperature = <90000>; 4887 hysteresis = <2000>; 4888 type = "passive"; 4889 }; 4890 4891 cpu3_alert1: trip-point1 { 4892 temperature = <95000>; 4893 hysteresis = <2000>; 4894 type = "passive"; 4895 }; 4896 4897 cpu3_crit: cpu-crit { 4898 temperature = <110000>; 4899 hysteresis = <1000>; 4900 type = "critical"; 4901 }; 4902 }; 4903 }; 4904 4905 cdsp0-thermal { 4906 polling-delay-passive = <10>; 4907 polling-delay = <0>; 4908 thermal-sensors = <&tsens1 5>; 4909 4910 trips { 4911 thermal-engine-config { 4912 temperature = <125000>; 4913 hysteresis = <1000>; 4914 type = "passive"; 4915 }; 4916 4917 thermal-hal-config { 4918 temperature = <125000>; 4919 hysteresis = <1000>; 4920 type = "passive"; 4921 }; 4922 4923 reset-mon-cfg { 4924 temperature = <115000>; 4925 hysteresis = <5000>; 4926 type = "passive"; 4927 }; 4928 4929 cdsp_0_config: junction-config { 4930 temperature = <95000>; 4931 hysteresis = <5000>; 4932 type = "passive"; 4933 }; 4934 }; 4935 }; 4936 4937 cdsp1-thermal { 4938 polling-delay-passive = <10>; 4939 polling-delay = <0>; 4940 thermal-sensors = <&tsens1 6>; 4941 4942 trips { 4943 thermal-engine-config { 4944 temperature = <125000>; 4945 hysteresis = <1000>; 4946 type = "passive"; 4947 }; 4948 4949 thermal-hal-config { 4950 temperature = <125000>; 4951 hysteresis = <1000>; 4952 type = "passive"; 4953 }; 4954 4955 reset-mon-cfg { 4956 temperature = <115000>; 4957 hysteresis = <5000>; 4958 type = "passive"; 4959 }; 4960 4961 cdsp_1_config: junction-config { 4962 temperature = <95000>; 4963 hysteresis = <5000>; 4964 type = "passive"; 4965 }; 4966 }; 4967 }; 4968 4969 cdsp2-thermal { 4970 polling-delay-passive = <10>; 4971 polling-delay = <0>; 4972 thermal-sensors = <&tsens1 7>; 4973 4974 trips { 4975 thermal-engine-config { 4976 temperature = <125000>; 4977 hysteresis = <1000>; 4978 type = "passive"; 4979 }; 4980 4981 thermal-hal-config { 4982 temperature = <125000>; 4983 hysteresis = <1000>; 4984 type = "passive"; 4985 }; 4986 4987 reset-mon-cfg { 4988 temperature = <115000>; 4989 hysteresis = <5000>; 4990 type = "passive"; 4991 }; 4992 4993 cdsp_2_config: junction-config { 4994 temperature = <95000>; 4995 hysteresis = <5000>; 4996 type = "passive"; 4997 }; 4998 }; 4999 }; 5000 5001 video-thermal { 5002 polling-delay-passive = <0>; 5003 polling-delay = <0>; 5004 thermal-sensors = <&tsens1 8>; 5005 5006 trips { 5007 thermal-engine-config { 5008 temperature = <125000>; 5009 hysteresis = <1000>; 5010 type = "passive"; 5011 }; 5012 5013 reset-mon-cfg { 5014 temperature = <115000>; 5015 hysteresis = <5000>; 5016 type = "passive"; 5017 }; 5018 }; 5019 }; 5020 5021 mem-thermal { 5022 polling-delay-passive = <10>; 5023 polling-delay = <0>; 5024 thermal-sensors = <&tsens1 9>; 5025 5026 trips { 5027 thermal-engine-config { 5028 temperature = <125000>; 5029 hysteresis = <1000>; 5030 type = "passive"; 5031 }; 5032 5033 ddr_config0: ddr0-config { 5034 temperature = <90000>; 5035 hysteresis = <5000>; 5036 type = "passive"; 5037 }; 5038 5039 reset-mon-cfg { 5040 temperature = <115000>; 5041 hysteresis = <5000>; 5042 type = "passive"; 5043 }; 5044 }; 5045 }; 5046 5047 modem0-thermal { 5048 polling-delay-passive = <0>; 5049 polling-delay = <0>; 5050 thermal-sensors = <&tsens1 10>; 5051 5052 trips { 5053 thermal-engine-config { 5054 temperature = <125000>; 5055 hysteresis = <1000>; 5056 type = "passive"; 5057 }; 5058 5059 mdmss0_config0: mdmss0-config0 { 5060 temperature = <102000>; 5061 hysteresis = <3000>; 5062 type = "passive"; 5063 }; 5064 5065 mdmss0_config1: mdmss0-config1 { 5066 temperature = <105000>; 5067 hysteresis = <3000>; 5068 type = "passive"; 5069 }; 5070 5071 reset-mon-cfg { 5072 temperature = <115000>; 5073 hysteresis = <5000>; 5074 type = "passive"; 5075 }; 5076 }; 5077 }; 5078 5079 modem1-thermal { 5080 polling-delay-passive = <0>; 5081 polling-delay = <0>; 5082 thermal-sensors = <&tsens1 11>; 5083 5084 trips { 5085 thermal-engine-config { 5086 temperature = <125000>; 5087 hysteresis = <1000>; 5088 type = "passive"; 5089 }; 5090 5091 mdmss1_config0: mdmss1-config0 { 5092 temperature = <102000>; 5093 hysteresis = <3000>; 5094 type = "passive"; 5095 }; 5096 5097 mdmss1_config1: mdmss1-config1 { 5098 temperature = <105000>; 5099 hysteresis = <3000>; 5100 type = "passive"; 5101 }; 5102 5103 reset-mon-cfg { 5104 temperature = <115000>; 5105 hysteresis = <5000>; 5106 type = "passive"; 5107 }; 5108 }; 5109 }; 5110 5111 modem2-thermal { 5112 polling-delay-passive = <0>; 5113 polling-delay = <0>; 5114 thermal-sensors = <&tsens1 12>; 5115 5116 trips { 5117 thermal-engine-config { 5118 temperature = <125000>; 5119 hysteresis = <1000>; 5120 type = "passive"; 5121 }; 5122 5123 mdmss2_config0: mdmss2-config0 { 5124 temperature = <102000>; 5125 hysteresis = <3000>; 5126 type = "passive"; 5127 }; 5128 5129 mdmss2_config1: mdmss2-config1 { 5130 temperature = <105000>; 5131 hysteresis = <3000>; 5132 type = "passive"; 5133 }; 5134 5135 reset-mon-cfg { 5136 temperature = <115000>; 5137 hysteresis = <5000>; 5138 type = "passive"; 5139 }; 5140 }; 5141 }; 5142 5143 modem3-thermal { 5144 polling-delay-passive = <0>; 5145 polling-delay = <0>; 5146 thermal-sensors = <&tsens1 13>; 5147 5148 trips { 5149 thermal-engine-config { 5150 temperature = <125000>; 5151 hysteresis = <1000>; 5152 type = "passive"; 5153 }; 5154 5155 mdmss3_config0: mdmss3-config0 { 5156 temperature = <102000>; 5157 hysteresis = <3000>; 5158 type = "passive"; 5159 }; 5160 5161 mdmss3_config1: mdmss3-config1 { 5162 temperature = <105000>; 5163 hysteresis = <3000>; 5164 type = "passive"; 5165 }; 5166 5167 reset-mon-cfg { 5168 temperature = <115000>; 5169 hysteresis = <5000>; 5170 type = "passive"; 5171 }; 5172 }; 5173 }; 5174 5175 camera0-thermal { 5176 polling-delay-passive = <0>; 5177 polling-delay = <0>; 5178 thermal-sensors = <&tsens1 14>; 5179 5180 trips { 5181 thermal-engine-config { 5182 temperature = <125000>; 5183 hysteresis = <1000>; 5184 type = "passive"; 5185 }; 5186 5187 reset-mon-cfg { 5188 temperature = <115000>; 5189 hysteresis = <5000>; 5190 type = "passive"; 5191 }; 5192 }; 5193 }; 5194 5195 camera1-thermal { 5196 polling-delay-passive = <0>; 5197 polling-delay = <0>; 5198 thermal-sensors = <&tsens1 15>; 5199 5200 trips { 5201 thermal-engine-config { 5202 temperature = <125000>; 5203 hysteresis = <1000>; 5204 type = "passive"; 5205 }; 5206 5207 reset-mon-cfg { 5208 temperature = <115000>; 5209 hysteresis = <5000>; 5210 type = "passive"; 5211 }; 5212 }; 5213 }; 5214 }; 5215 5216 timer { 5217 compatible = "arm,armv8-timer"; 5218 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 5219 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 5220 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 5221 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; 5222 clock-frequency = <19200000>; 5223 }; 5224}; 5225
