1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
4 */
5
6/dts-v1/;
7
8#include "bcm4709.dtsi"
9
10/ {
11	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
12	model = "TP-LINK Archer C9 V1";
13
14	chosen {
15		bootargs = "console=ttyS0,115200 earlycon";
16	};
17
18	memory@0 {
19		device_type = "memory";
20		reg = <0x00000000 0x08000000>;
21	};
22
23	leds {
24		compatible = "gpio-leds";
25
26		lan {
27			label = "bcm53xx:blue:lan";
28			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
29		};
30
31		wps {
32			label = "bcm53xx:blue:wps";
33			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
34		};
35
36		2ghz {
37			label = "bcm53xx:blue:2ghz";
38			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
39		};
40
41		5ghz {
42			label = "bcm53xx:blue:5ghz";
43			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
44		};
45
46		usb3 {
47			label = "bcm53xx:blue:usb3";
48			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
49			trigger-sources = <&ohci_port1>, <&ehci_port1>,
50					  <&xhci_port1>;
51			linux,default-trigger = "usbport";
52		};
53
54		usb2 {
55			label = "bcm53xx:blue:usb2";
56			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
57			trigger-sources = <&ohci_port2>, <&ehci_port2>;
58			linux,default-trigger = "usbport";
59		};
60
61		wan-blue {
62			label = "bcm53xx:blue:wan";
63			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
64		};
65
66		wan-amber {
67			label = "bcm53xx:amber:wan";
68			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
69		};
70
71		power {
72			label = "bcm53xx:blue:power";
73			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
74			linux,default-trigger = "default-on";
75		};
76	};
77
78	gpio-keys {
79		compatible = "gpio-keys";
80
81		button-wps {
82			label = "WPS";
83			linux,code = <KEY_WPS_BUTTON>;
84			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
85		};
86
87		button-restart {
88			label = "Reset";
89			linux,code = <KEY_RESTART>;
90			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
91		};
92	};
93};
94
95&usb2 {
96	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
97};
98
99&usb3 {
100	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
101};
102
103&spi_nor {
104	status = "okay";
105
106	partitions {
107		compatible = "fixed-partitions";
108		#address-cells = <1>;
109		#size-cells = <1>;
110
111		boot@0 {
112			label = "boot";
113			reg = <0x000000 0x040000>;
114			read-only;
115		};
116
117		os-image@100000 {
118			label = "os-image";
119			reg = <0x040000 0x200000>;
120			compatible = "brcm,trx";
121		};
122
123		rootfs@240000 {
124			label = "rootfs";
125			reg = <0x240000 0xc00000>;
126		};
127
128		nvram@ff0000 {
129			label = "nvram";
130			reg = <0xff0000 0x010000>;
131		};
132	};
133};
134
135&usb3_phy {
136	status = "okay";
137};
138