1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2014 Broadcom Corporation
3
4 #include <linux/kernel.h>
5 #include <linux/err.h>
6 #include <linux/clk-provider.h>
7 #include <linux/io.h>
8 #include <linux/of.h>
9 #include <linux/clkdev.h>
10 #include <linux/of_address.h>
11 #include <linux/delay.h>
12
13 #include <dt-bindings/clock/bcm-cygnus.h>
14 #include "clk-iproc.h"
15
16 #define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
17
18 #define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
19 .pwr_shift = ps, .iso_shift = is }
20
21 #define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
22
23 #define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
24 { .offset = o, .en_shift = es, .high_shift = hs, \
25 .high_width = hw, .low_shift = ls, .low_width = lw }
26
27 #define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
28 .p_reset_shift = prs }
29
30 #define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
31 .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
32 .ka_width = kaw }
33
34 #define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
35
36 #define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
37 .hold_shift = hs, .bypass_shift = bs }
38
39 #define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
40
cygnus_armpll_init(struct device_node * node)41 static void __init cygnus_armpll_init(struct device_node *node)
42 {
43 iproc_armpll_setup(node);
44 }
45 CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
46
47 static const struct iproc_pll_ctrl genpll = {
48 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
49 IPROC_CLK_PLL_NEEDS_SW_CFG,
50 .aon = AON_VAL(0x0, 2, 1, 0),
51 .reset = RESET_VAL(0x0, 11, 10),
52 .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
53 .sw_ctrl = SW_CTRL_VAL(0x10, 31),
54 .ndiv_int = REG_VAL(0x10, 20, 10),
55 .ndiv_frac = REG_VAL(0x10, 0, 20),
56 .pdiv = REG_VAL(0x14, 0, 4),
57 .vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
58 .status = REG_VAL(0x28, 12, 1),
59 };
60
61 static const struct iproc_clk_ctrl genpll_clk[] = {
62 [BCM_CYGNUS_GENPLL_AXI21_CLK] = {
63 .channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
64 .flags = IPROC_CLK_AON,
65 .enable = ENABLE_VAL(0x4, 6, 0, 12),
66 .mdiv = REG_VAL(0x20, 0, 8),
67 },
68 [BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
69 .channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
70 .flags = IPROC_CLK_AON,
71 .enable = ENABLE_VAL(0x4, 7, 1, 13),
72 .mdiv = REG_VAL(0x20, 10, 8),
73 },
74 [BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
75 .channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
76 .flags = IPROC_CLK_AON,
77 .enable = ENABLE_VAL(0x4, 8, 2, 14),
78 .mdiv = REG_VAL(0x20, 20, 8),
79 },
80 [BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
81 .channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
82 .flags = IPROC_CLK_AON,
83 .enable = ENABLE_VAL(0x4, 9, 3, 15),
84 .mdiv = REG_VAL(0x24, 0, 8),
85 },
86 [BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
87 .channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
88 .flags = IPROC_CLK_AON,
89 .enable = ENABLE_VAL(0x4, 10, 4, 16),
90 .mdiv = REG_VAL(0x24, 10, 8),
91 },
92 [BCM_CYGNUS_GENPLL_CAN_CLK] = {
93 .channel = BCM_CYGNUS_GENPLL_CAN_CLK,
94 .flags = IPROC_CLK_AON,
95 .enable = ENABLE_VAL(0x4, 11, 5, 17),
96 .mdiv = REG_VAL(0x24, 20, 8),
97 },
98 };
99
cygnus_genpll_clk_init(struct device_node * node)100 static void __init cygnus_genpll_clk_init(struct device_node *node)
101 {
102 iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
103 ARRAY_SIZE(genpll_clk));
104 }
105 CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
106
107 static const struct iproc_pll_ctrl lcpll0 = {
108 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
109 .aon = AON_VAL(0x0, 2, 5, 4),
110 .reset = RESET_VAL(0x0, 31, 30),
111 .dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
112 .sw_ctrl = SW_CTRL_VAL(0x4, 31),
113 .ndiv_int = REG_VAL(0x4, 16, 10),
114 .pdiv = REG_VAL(0x4, 26, 4),
115 .vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
116 .status = REG_VAL(0x18, 12, 1),
117 };
118
119 static const struct iproc_clk_ctrl lcpll0_clk[] = {
120 [BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
121 .channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
122 .flags = IPROC_CLK_AON,
123 .enable = ENABLE_VAL(0x0, 7, 1, 13),
124 .mdiv = REG_VAL(0x8, 0, 8),
125 },
126 [BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
127 .channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
128 .flags = IPROC_CLK_AON,
129 .enable = ENABLE_VAL(0x0, 8, 2, 14),
130 .mdiv = REG_VAL(0x8, 10, 8),
131 },
132 [BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
133 .channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
134 .flags = IPROC_CLK_AON,
135 .enable = ENABLE_VAL(0x0, 9, 3, 15),
136 .mdiv = REG_VAL(0x8, 20, 8),
137 },
138 [BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
139 .channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
140 .flags = IPROC_CLK_AON,
141 .enable = ENABLE_VAL(0x0, 10, 4, 16),
142 .mdiv = REG_VAL(0xc, 0, 8),
143 },
144 [BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
145 .channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
146 .flags = IPROC_CLK_AON,
147 .enable = ENABLE_VAL(0x0, 11, 5, 17),
148 .mdiv = REG_VAL(0xc, 10, 8),
149 },
150 [BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
151 .channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
152 .flags = IPROC_CLK_AON,
153 .enable = ENABLE_VAL(0x0, 12, 6, 18),
154 .mdiv = REG_VAL(0xc, 20, 8),
155 },
156 };
157
cygnus_lcpll0_clk_init(struct device_node * node)158 static void __init cygnus_lcpll0_clk_init(struct device_node *node)
159 {
160 iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
161 ARRAY_SIZE(lcpll0_clk));
162 }
163 CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
164
165 /*
166 * MIPI PLL VCO frequency parameter table
167 */
168 static const struct iproc_pll_vco_param mipipll_vco_params[] = {
169 /* rate (Hz) ndiv_int ndiv_frac pdiv */
170 { 750000000UL, 30, 0, 1 },
171 { 1000000000UL, 40, 0, 1 },
172 { 1350000000ul, 54, 0, 1 },
173 { 2000000000UL, 80, 0, 1 },
174 { 2100000000UL, 84, 0, 1 },
175 { 2250000000UL, 90, 0, 1 },
176 { 2500000000UL, 100, 0, 1 },
177 { 2700000000UL, 54, 0, 0 },
178 { 2975000000UL, 119, 0, 1 },
179 { 3100000000UL, 124, 0, 1 },
180 { 3150000000UL, 126, 0, 1 },
181 };
182
183 static const struct iproc_pll_ctrl mipipll = {
184 .flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
185 IPROC_CLK_NEEDS_READ_BACK,
186 .aon = AON_VAL(0x0, 4, 17, 16),
187 .asiu = ASIU_GATE_VAL(0x0, 3),
188 .reset = RESET_VAL(0x0, 11, 10),
189 .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
190 .ndiv_int = REG_VAL(0x10, 20, 10),
191 .ndiv_frac = REG_VAL(0x10, 0, 20),
192 .pdiv = REG_VAL(0x14, 0, 4),
193 .vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
194 .status = REG_VAL(0x28, 12, 1),
195 };
196
197 static const struct iproc_clk_ctrl mipipll_clk[] = {
198 [BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
199 .channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
200 .flags = IPROC_CLK_NEEDS_READ_BACK,
201 .enable = ENABLE_VAL(0x4, 12, 6, 18),
202 .mdiv = REG_VAL(0x20, 0, 8),
203 },
204 [BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
205 .channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
206 .flags = IPROC_CLK_NEEDS_READ_BACK,
207 .enable = ENABLE_VAL(0x4, 13, 7, 19),
208 .mdiv = REG_VAL(0x20, 10, 8),
209 },
210 [BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
211 .channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
212 .flags = IPROC_CLK_NEEDS_READ_BACK,
213 .enable = ENABLE_VAL(0x4, 14, 8, 20),
214 .mdiv = REG_VAL(0x20, 20, 8),
215 },
216 [BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
217 .channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
218 .flags = IPROC_CLK_NEEDS_READ_BACK,
219 .enable = ENABLE_VAL(0x4, 15, 9, 21),
220 .mdiv = REG_VAL(0x24, 0, 8),
221 },
222 [BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
223 .channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
224 .flags = IPROC_CLK_NEEDS_READ_BACK,
225 .enable = ENABLE_VAL(0x4, 16, 10, 22),
226 .mdiv = REG_VAL(0x24, 10, 8),
227 },
228 [BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
229 .channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
230 .flags = IPROC_CLK_NEEDS_READ_BACK,
231 .enable = ENABLE_VAL(0x4, 17, 11, 23),
232 .mdiv = REG_VAL(0x24, 20, 8),
233 },
234 };
235
cygnus_mipipll_clk_init(struct device_node * node)236 static void __init cygnus_mipipll_clk_init(struct device_node *node)
237 {
238 iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
239 ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
240 ARRAY_SIZE(mipipll_clk));
241 }
242 CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
243
244 static const struct iproc_asiu_div asiu_div[] = {
245 [BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
246 [BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
247 [BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
248 };
249
250 static const struct iproc_asiu_gate asiu_gate[] = {
251 [BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
252 [BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
253 [BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
254 };
255
cygnus_asiu_init(struct device_node * node)256 static void __init cygnus_asiu_init(struct device_node *node)
257 {
258 iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
259 }
260 CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
261
262 static const struct iproc_pll_ctrl audiopll = {
263 .flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
264 IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW |
265 IPROC_CLK_PLL_CALC_PARAM,
266 .reset = RESET_VAL(0x5c, 0, 1),
267 .dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
268 .sw_ctrl = SW_CTRL_VAL(0x4, 0),
269 .ndiv_int = REG_VAL(0x8, 0, 10),
270 .ndiv_frac = REG_VAL(0x8, 10, 20),
271 .pdiv = REG_VAL(0x44, 0, 4),
272 .vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10),
273 .status = REG_VAL(0x54, 0, 1),
274 .macro_mode = REG_VAL(0x0, 0, 3),
275 };
276
277 static const struct iproc_clk_ctrl audiopll_clk[] = {
278 [BCM_CYGNUS_AUDIOPLL_CH0] = {
279 .channel = BCM_CYGNUS_AUDIOPLL_CH0,
280 .flags = IPROC_CLK_AON | IPROC_CLK_MCLK_DIV_BY_2,
281 .enable = ENABLE_VAL(0x14, 8, 10, 9),
282 .mdiv = REG_VAL(0x14, 0, 8),
283 },
284 [BCM_CYGNUS_AUDIOPLL_CH1] = {
285 .channel = BCM_CYGNUS_AUDIOPLL_CH1,
286 .flags = IPROC_CLK_AON,
287 .enable = ENABLE_VAL(0x18, 8, 10, 9),
288 .mdiv = REG_VAL(0x18, 0, 8),
289 },
290 [BCM_CYGNUS_AUDIOPLL_CH2] = {
291 .channel = BCM_CYGNUS_AUDIOPLL_CH2,
292 .flags = IPROC_CLK_AON,
293 .enable = ENABLE_VAL(0x1c, 8, 10, 9),
294 .mdiv = REG_VAL(0x1c, 0, 8),
295 },
296 };
297
cygnus_audiopll_clk_init(struct device_node * node)298 static void __init cygnus_audiopll_clk_init(struct device_node *node)
299 {
300 iproc_pll_clk_setup(node, &audiopll, NULL, 0,
301 audiopll_clk, ARRAY_SIZE(audiopll_clk));
302 }
303 CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
304 cygnus_audiopll_clk_init);
305
