1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Hardware definitions for the Toshiba eseries PDAs
4 *
5 * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
6 */
7
8 #include <linux/clkdev.h>
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/clk-provider.h>
12 #include <linux/gpio/machine.h>
13 #include <linux/gpio.h>
14 #include <linux/delay.h>
15 #include <linux/platform_device.h>
16 #include <linux/mfd/tc6387xb.h>
17 #include <linux/mfd/tc6393xb.h>
18 #include <linux/mfd/t7l66xb.h>
19 #include <linux/mtd/rawnand.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/memblock.h>
22 #include <linux/gpio/machine.h>
23
24 #include <video/w100fb.h>
25
26 #include <asm/setup.h>
27 #include <asm/mach/arch.h>
28 #include <asm/mach-types.h>
29
30 #include "pxa25x.h"
31 #include "eseries-gpio.h"
32 #include "eseries-irq.h"
33 #include <linux/platform_data/asoc-pxa.h>
34 #include <linux/platform_data/video-pxafb.h>
35 #include "udc.h"
36 #include <linux/platform_data/irda-pxaficp.h>
37
38 #include "devices.h"
39 #include "generic.h"
40
41 /* Only e800 has 128MB RAM */
eseries_fixup(struct tag * tags,char ** cmdline)42 void __init eseries_fixup(struct tag *tags, char **cmdline)
43 {
44 if (machine_is_e800())
45 memblock_add(0xa0000000, SZ_128M);
46 else
47 memblock_add(0xa0000000, SZ_64M);
48 }
49
50 static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
51 .dev_id = "gpio-vbus",
52 .table = {
53 GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
54 "vbus", GPIO_ACTIVE_HIGH),
55 GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
56 "pullup", GPIO_ACTIVE_LOW),
57 { },
58 },
59 };
60
61 static struct platform_device e7xx_gpio_vbus __maybe_unused = {
62 .name = "gpio-vbus",
63 .id = -1,
64 };
65
66 struct pxaficp_platform_data e7xx_ficp_platform_data = {
67 .gpio_pwdown = GPIO_E7XX_IR_OFF,
68 .transceiver_cap = IR_SIRMODE | IR_OFF,
69 };
70
eseries_tmio_enable(struct platform_device * dev)71 int eseries_tmio_enable(struct platform_device *dev)
72 {
73 /* Reset - bring SUSPEND high before PCLR */
74 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
75 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
76 msleep(1);
77 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
78 msleep(1);
79 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
80 msleep(1);
81 return 0;
82 }
83
eseries_tmio_disable(struct platform_device * dev)84 void eseries_tmio_disable(struct platform_device *dev)
85 {
86 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
87 gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
88 }
89
eseries_tmio_suspend(struct platform_device * dev)90 int eseries_tmio_suspend(struct platform_device *dev)
91 {
92 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
93 return 0;
94 }
95
eseries_tmio_resume(struct platform_device * dev)96 int eseries_tmio_resume(struct platform_device *dev)
97 {
98 gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
99 msleep(1);
100 return 0;
101 }
102
eseries_get_tmio_gpios(void)103 void eseries_get_tmio_gpios(void)
104 {
105 gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
106 gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
107 gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
108 gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
109 }
110
111 /* TMIO controller uses the same resources on all e-series machines. */
112 struct resource eseries_tmio_resources[] = {
113 [0] = {
114 .start = PXA_CS4_PHYS,
115 .end = PXA_CS4_PHYS + 0x1fffff,
116 .flags = IORESOURCE_MEM,
117 },
118 [1] = {
119 .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
120 .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
121 .flags = IORESOURCE_IRQ,
122 },
123 };
124
125 /* Some e-series hardware cannot control the 32K clock */
eseries_register_clks(void)126 static void __init __maybe_unused eseries_register_clks(void)
127 {
128 clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
129 }
130
131 #ifdef CONFIG_MACH_E330
132 /* -------------------- e330 tc6387xb parameters -------------------- */
133
134 static struct tc6387xb_platform_data e330_tc6387xb_info = {
135 .enable = &eseries_tmio_enable,
136 .suspend = &eseries_tmio_suspend,
137 .resume = &eseries_tmio_resume,
138 };
139
140 static struct platform_device e330_tc6387xb_device = {
141 .name = "tc6387xb",
142 .id = -1,
143 .dev = {
144 .platform_data = &e330_tc6387xb_info,
145 },
146 .num_resources = 2,
147 .resource = eseries_tmio_resources,
148 };
149
150 /* --------------------------------------------------------------- */
151
152 static struct platform_device *e330_devices[] __initdata = {
153 &e330_tc6387xb_device,
154 &e7xx_gpio_vbus,
155 };
156
e330_init(void)157 static void __init e330_init(void)
158 {
159 pxa_set_ffuart_info(NULL);
160 pxa_set_btuart_info(NULL);
161 pxa_set_stuart_info(NULL);
162 eseries_register_clks();
163 eseries_get_tmio_gpios();
164 gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
165 platform_add_devices(ARRAY_AND_SIZE(e330_devices));
166 }
167
168 MACHINE_START(E330, "Toshiba e330")
169 /* Maintainer: Ian Molton (spyro@f2s.com) */
170 .atag_offset = 0x100,
171 .map_io = pxa25x_map_io,
172 .nr_irqs = ESERIES_NR_IRQS,
173 .init_irq = pxa25x_init_irq,
174 .handle_irq = pxa25x_handle_irq,
175 .fixup = eseries_fixup,
176 .init_machine = e330_init,
177 .init_time = pxa_timer_init,
178 .restart = pxa_restart,
179 MACHINE_END
180 #endif
181
182 #ifdef CONFIG_MACH_E350
183 /* -------------------- e350 t7l66xb parameters -------------------- */
184
185 static struct t7l66xb_platform_data e350_t7l66xb_info = {
186 .irq_base = IRQ_BOARD_START,
187 .enable = &eseries_tmio_enable,
188 .suspend = &eseries_tmio_suspend,
189 .resume = &eseries_tmio_resume,
190 };
191
192 static struct platform_device e350_t7l66xb_device = {
193 .name = "t7l66xb",
194 .id = -1,
195 .dev = {
196 .platform_data = &e350_t7l66xb_info,
197 },
198 .num_resources = 2,
199 .resource = eseries_tmio_resources,
200 };
201
202 /* ---------------------------------------------------------- */
203
204 static struct platform_device *e350_devices[] __initdata = {
205 &e350_t7l66xb_device,
206 &e7xx_gpio_vbus,
207 };
208
e350_init(void)209 static void __init e350_init(void)
210 {
211 pxa_set_ffuart_info(NULL);
212 pxa_set_btuart_info(NULL);
213 pxa_set_stuart_info(NULL);
214 eseries_register_clks();
215 eseries_get_tmio_gpios();
216 gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
217 platform_add_devices(ARRAY_AND_SIZE(e350_devices));
218 }
219
220 MACHINE_START(E350, "Toshiba e350")
221 /* Maintainer: Ian Molton (spyro@f2s.com) */
222 .atag_offset = 0x100,
223 .map_io = pxa25x_map_io,
224 .nr_irqs = ESERIES_NR_IRQS,
225 .init_irq = pxa25x_init_irq,
226 .handle_irq = pxa25x_handle_irq,
227 .fixup = eseries_fixup,
228 .init_machine = e350_init,
229 .init_time = pxa_timer_init,
230 .restart = pxa_restart,
231 MACHINE_END
232 #endif
233
234 #ifdef CONFIG_MACH_E400
235 /* ------------------------ E400 LCD definitions ------------------------ */
236
237 static struct pxafb_mode_info e400_pxafb_mode_info = {
238 .pixclock = 140703,
239 .xres = 240,
240 .yres = 320,
241 .bpp = 16,
242 .hsync_len = 4,
243 .left_margin = 28,
244 .right_margin = 8,
245 .vsync_len = 3,
246 .upper_margin = 5,
247 .lower_margin = 6,
248 .sync = 0,
249 };
250
251 static struct pxafb_mach_info e400_pxafb_mach_info = {
252 .modes = &e400_pxafb_mode_info,
253 .num_modes = 1,
254 .lcd_conn = LCD_COLOR_TFT_16BPP,
255 .lccr3 = 0,
256 .pxafb_backlight_power = NULL,
257 };
258
259 /* ------------------------ E400 MFP config ----------------------------- */
260
261 static unsigned long e400_pin_config[] __initdata = {
262 /* Chip selects */
263 GPIO15_nCS_1, /* CS1 - Flash */
264 GPIO80_nCS_4, /* CS4 - TMIO */
265
266 /* Clocks */
267 GPIO12_32KHz,
268
269 /* BTUART */
270 GPIO42_BTUART_RXD,
271 GPIO43_BTUART_TXD,
272 GPIO44_BTUART_CTS,
273
274 /* TMIO controller */
275 GPIO19_GPIO, /* t7l66xb #PCLR */
276 GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
277
278 /* wakeup */
279 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
280 };
281
282 /* ---------------------------------------------------------------------- */
283
284 static struct mtd_partition partition_a = {
285 .name = "Internal NAND flash",
286 .offset = 0,
287 .size = MTDPART_SIZ_FULL,
288 };
289
290 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
291
292 static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
293 .options = 0,
294 .offs = 4,
295 .len = 2,
296 .pattern = scan_ff_pattern
297 };
298
299 static struct tmio_nand_data e400_t7l66xb_nand_config = {
300 .num_partitions = 1,
301 .partition = &partition_a,
302 .badblock_pattern = &e400_t7l66xb_nand_bbt,
303 };
304
305 static struct t7l66xb_platform_data e400_t7l66xb_info = {
306 .irq_base = IRQ_BOARD_START,
307 .enable = &eseries_tmio_enable,
308 .suspend = &eseries_tmio_suspend,
309 .resume = &eseries_tmio_resume,
310
311 .nand_data = &e400_t7l66xb_nand_config,
312 };
313
314 static struct platform_device e400_t7l66xb_device = {
315 .name = "t7l66xb",
316 .id = -1,
317 .dev = {
318 .platform_data = &e400_t7l66xb_info,
319 },
320 .num_resources = 2,
321 .resource = eseries_tmio_resources,
322 };
323
324 /* ---------------------------------------------------------- */
325
326 static struct platform_device *e400_devices[] __initdata = {
327 &e400_t7l66xb_device,
328 &e7xx_gpio_vbus,
329 };
330
e400_init(void)331 static void __init e400_init(void)
332 {
333 pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
334 pxa_set_ffuart_info(NULL);
335 pxa_set_btuart_info(NULL);
336 pxa_set_stuart_info(NULL);
337 /* Fixme - e400 may have a switched clock */
338 eseries_register_clks();
339 eseries_get_tmio_gpios();
340 pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
341 gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
342 platform_add_devices(ARRAY_AND_SIZE(e400_devices));
343 }
344
345 MACHINE_START(E400, "Toshiba e400")
346 /* Maintainer: Ian Molton (spyro@f2s.com) */
347 .atag_offset = 0x100,
348 .map_io = pxa25x_map_io,
349 .nr_irqs = ESERIES_NR_IRQS,
350 .init_irq = pxa25x_init_irq,
351 .handle_irq = pxa25x_handle_irq,
352 .fixup = eseries_fixup,
353 .init_machine = e400_init,
354 .init_time = pxa_timer_init,
355 .restart = pxa_restart,
356 MACHINE_END
357 #endif
358
359 #ifdef CONFIG_MACH_E740
360 /* ------------------------ e740 video support --------------------------- */
361
362 static struct w100_gen_regs e740_lcd_regs = {
363 .lcd_format = 0x00008023,
364 .lcdd_cntl1 = 0x0f000000,
365 .lcdd_cntl2 = 0x0003ffff,
366 .genlcd_cntl1 = 0x00ffff03,
367 .genlcd_cntl2 = 0x003c0f03,
368 .genlcd_cntl3 = 0x000143aa,
369 };
370
371 static struct w100_mode e740_lcd_mode = {
372 .xres = 240,
373 .yres = 320,
374 .left_margin = 20,
375 .right_margin = 28,
376 .upper_margin = 9,
377 .lower_margin = 8,
378 .crtc_ss = 0x80140013,
379 .crtc_ls = 0x81150110,
380 .crtc_gs = 0x80050005,
381 .crtc_vpos_gs = 0x000a0009,
382 .crtc_rev = 0x0040010a,
383 .crtc_dclk = 0xa906000a,
384 .crtc_gclk = 0x80050108,
385 .crtc_goe = 0x80050108,
386 .pll_freq = 57,
387 .pixclk_divider = 4,
388 .pixclk_divider_rotated = 4,
389 .pixclk_src = CLK_SRC_XTAL,
390 .sysclk_divider = 1,
391 .sysclk_src = CLK_SRC_PLL,
392 .crtc_ps1_active = 0x41060010,
393 };
394
395 static struct w100_gpio_regs e740_w100_gpio_info = {
396 .init_data1 = 0x21002103,
397 .gpio_dir1 = 0xffffdeff,
398 .gpio_oe1 = 0x03c00643,
399 .init_data2 = 0x003f003f,
400 .gpio_dir2 = 0xffffffff,
401 .gpio_oe2 = 0x000000ff,
402 };
403
404 static struct w100fb_mach_info e740_fb_info = {
405 .modelist = &e740_lcd_mode,
406 .num_modes = 1,
407 .regs = &e740_lcd_regs,
408 .gpio = &e740_w100_gpio_info,
409 .xtal_freq = 14318000,
410 .xtal_dbl = 1,
411 };
412
413 static struct resource e740_fb_resources[] = {
414 [0] = {
415 .start = 0x0c000000,
416 .end = 0x0cffffff,
417 .flags = IORESOURCE_MEM,
418 },
419 };
420
421 static struct platform_device e740_fb_device = {
422 .name = "w100fb",
423 .id = -1,
424 .dev = {
425 .platform_data = &e740_fb_info,
426 },
427 .num_resources = ARRAY_SIZE(e740_fb_resources),
428 .resource = e740_fb_resources,
429 };
430
431 /* --------------------------- MFP Pin config -------------------------- */
432
433 static unsigned long e740_pin_config[] __initdata = {
434 /* Chip selects */
435 GPIO15_nCS_1, /* CS1 - Flash */
436 GPIO79_nCS_3, /* CS3 - IMAGEON */
437 GPIO80_nCS_4, /* CS4 - TMIO */
438
439 /* Clocks */
440 GPIO12_32KHz,
441
442 /* BTUART */
443 GPIO42_BTUART_RXD,
444 GPIO43_BTUART_TXD,
445 GPIO44_BTUART_CTS,
446
447 /* TMIO controller */
448 GPIO19_GPIO, /* t7l66xb #PCLR */
449 GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
450
451 /* UDC */
452 GPIO13_GPIO,
453 GPIO3_GPIO,
454
455 /* IrDA */
456 GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
457
458 /* AC97 */
459 GPIO28_AC97_BITCLK,
460 GPIO29_AC97_SDATA_IN_0,
461 GPIO30_AC97_SDATA_OUT,
462 GPIO31_AC97_SYNC,
463
464 /* Audio power control */
465 GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
466 GPIO40_GPIO, /* Mic amp power */
467 GPIO41_GPIO, /* Headphone amp power */
468
469 /* PC Card */
470 GPIO8_GPIO, /* CD0 */
471 GPIO44_GPIO, /* CD1 */
472 GPIO11_GPIO, /* IRQ0 */
473 GPIO6_GPIO, /* IRQ1 */
474 GPIO27_GPIO, /* RST0 */
475 GPIO24_GPIO, /* RST1 */
476 GPIO20_GPIO, /* PWR0 */
477 GPIO23_GPIO, /* PWR1 */
478 GPIO48_nPOE,
479 GPIO49_nPWE,
480 GPIO50_nPIOR,
481 GPIO51_nPIOW,
482 GPIO52_nPCE_1,
483 GPIO53_nPCE_2,
484 GPIO54_nPSKTSEL,
485 GPIO55_nPREG,
486 GPIO56_nPWAIT,
487 GPIO57_nIOIS16,
488
489 /* wakeup */
490 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
491 };
492
493 /* -------------------- e740 t7l66xb parameters -------------------- */
494
495 static struct t7l66xb_platform_data e740_t7l66xb_info = {
496 .irq_base = IRQ_BOARD_START,
497 .enable = &eseries_tmio_enable,
498 .suspend = &eseries_tmio_suspend,
499 .resume = &eseries_tmio_resume,
500 };
501
502 static struct platform_device e740_t7l66xb_device = {
503 .name = "t7l66xb",
504 .id = -1,
505 .dev = {
506 .platform_data = &e740_t7l66xb_info,
507 },
508 .num_resources = 2,
509 .resource = eseries_tmio_resources,
510 };
511
512 static struct platform_device e740_audio_device = {
513 .name = "e740-audio",
514 .id = -1,
515 };
516
517 static struct gpiod_lookup_table e740_audio_gpio_table = {
518 .dev_id = "e740-audio",
519 .table = {
520 GPIO_LOOKUP("gpio-pxa", GPIO_E740_WM9705_nAVDD2, "Audio power", GPIO_ACTIVE_HIGH),
521 GPIO_LOOKUP("gpio-pxa", GPIO_E740_AMP_ON, "Output amp", GPIO_ACTIVE_HIGH),
522 GPIO_LOOKUP("gpio-pxa", GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
523 { },
524 },
525 };
526
527 /* ----------------------------------------------------------------------- */
528
529 static struct platform_device *e740_devices[] __initdata = {
530 &e740_fb_device,
531 &e740_t7l66xb_device,
532 &e7xx_gpio_vbus,
533 &e740_audio_device,
534 };
535
e740_init(void)536 static void __init e740_init(void)
537 {
538 pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
539 pxa_set_ffuart_info(NULL);
540 pxa_set_btuart_info(NULL);
541 pxa_set_stuart_info(NULL);
542 eseries_register_clks();
543 clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
544 "UDCCLK", &pxa25x_device_udc.dev),
545 eseries_get_tmio_gpios();
546 gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
547 gpiod_add_lookup_table(&e740_audio_gpio_table);
548 platform_add_devices(ARRAY_AND_SIZE(e740_devices));
549 pxa_set_ac97_info(NULL);
550 pxa_set_ficp_info(&e7xx_ficp_platform_data);
551 }
552
553 MACHINE_START(E740, "Toshiba e740")
554 /* Maintainer: Ian Molton (spyro@f2s.com) */
555 .atag_offset = 0x100,
556 .map_io = pxa25x_map_io,
557 .nr_irqs = ESERIES_NR_IRQS,
558 .init_irq = pxa25x_init_irq,
559 .handle_irq = pxa25x_handle_irq,
560 .fixup = eseries_fixup,
561 .init_machine = e740_init,
562 .init_time = pxa_timer_init,
563 .restart = pxa_restart,
564 MACHINE_END
565 #endif
566
567 #ifdef CONFIG_MACH_E750
568 /* ---------------------- E750 LCD definitions -------------------- */
569
570 static struct w100_gen_regs e750_lcd_regs = {
571 .lcd_format = 0x00008003,
572 .lcdd_cntl1 = 0x00000000,
573 .lcdd_cntl2 = 0x0003ffff,
574 .genlcd_cntl1 = 0x00fff003,
575 .genlcd_cntl2 = 0x003c0f03,
576 .genlcd_cntl3 = 0x000143aa,
577 };
578
579 static struct w100_mode e750_lcd_mode = {
580 .xres = 240,
581 .yres = 320,
582 .left_margin = 21,
583 .right_margin = 22,
584 .upper_margin = 5,
585 .lower_margin = 4,
586 .crtc_ss = 0x80150014,
587 .crtc_ls = 0x8014000d,
588 .crtc_gs = 0xc1000005,
589 .crtc_vpos_gs = 0x00020147,
590 .crtc_rev = 0x0040010a,
591 .crtc_dclk = 0xa1700030,
592 .crtc_gclk = 0x80cc0015,
593 .crtc_goe = 0x80cc0015,
594 .crtc_ps1_active = 0x61060017,
595 .pll_freq = 57,
596 .pixclk_divider = 4,
597 .pixclk_divider_rotated = 4,
598 .pixclk_src = CLK_SRC_XTAL,
599 .sysclk_divider = 1,
600 .sysclk_src = CLK_SRC_PLL,
601 };
602
603 static struct w100_gpio_regs e750_w100_gpio_info = {
604 .init_data1 = 0x01192f1b,
605 .gpio_dir1 = 0xd5ffdeff,
606 .gpio_oe1 = 0x000020bf,
607 .init_data2 = 0x010f010f,
608 .gpio_dir2 = 0xffffffff,
609 .gpio_oe2 = 0x000001cf,
610 };
611
612 static struct w100fb_mach_info e750_fb_info = {
613 .modelist = &e750_lcd_mode,
614 .num_modes = 1,
615 .regs = &e750_lcd_regs,
616 .gpio = &e750_w100_gpio_info,
617 .xtal_freq = 14318000,
618 .xtal_dbl = 1,
619 };
620
621 static struct resource e750_fb_resources[] = {
622 [0] = {
623 .start = 0x0c000000,
624 .end = 0x0cffffff,
625 .flags = IORESOURCE_MEM,
626 },
627 };
628
629 static struct platform_device e750_fb_device = {
630 .name = "w100fb",
631 .id = -1,
632 .dev = {
633 .platform_data = &e750_fb_info,
634 },
635 .num_resources = ARRAY_SIZE(e750_fb_resources),
636 .resource = e750_fb_resources,
637 };
638
639 /* -------------------- e750 MFP parameters -------------------- */
640
641 static unsigned long e750_pin_config[] __initdata = {
642 /* Chip selects */
643 GPIO15_nCS_1, /* CS1 - Flash */
644 GPIO79_nCS_3, /* CS3 - IMAGEON */
645 GPIO80_nCS_4, /* CS4 - TMIO */
646
647 /* Clocks */
648 GPIO11_3_6MHz,
649
650 /* BTUART */
651 GPIO42_BTUART_RXD,
652 GPIO43_BTUART_TXD,
653 GPIO44_BTUART_CTS,
654
655 /* TMIO controller */
656 GPIO19_GPIO, /* t7l66xb #PCLR */
657 GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
658
659 /* UDC */
660 GPIO13_GPIO,
661 GPIO3_GPIO,
662
663 /* IrDA */
664 GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
665
666 /* AC97 */
667 GPIO28_AC97_BITCLK,
668 GPIO29_AC97_SDATA_IN_0,
669 GPIO30_AC97_SDATA_OUT,
670 GPIO31_AC97_SYNC,
671
672 /* Audio power control */
673 GPIO4_GPIO, /* Headphone amp power */
674 GPIO7_GPIO, /* Speaker amp power */
675 GPIO37_GPIO, /* Headphone detect */
676
677 /* PC Card */
678 GPIO8_GPIO, /* CD0 */
679 GPIO44_GPIO, /* CD1 */
680 /* GPIO11_GPIO, IRQ0 */
681 GPIO6_GPIO, /* IRQ1 */
682 GPIO27_GPIO, /* RST0 */
683 GPIO24_GPIO, /* RST1 */
684 GPIO20_GPIO, /* PWR0 */
685 GPIO23_GPIO, /* PWR1 */
686 GPIO48_nPOE,
687 GPIO49_nPWE,
688 GPIO50_nPIOR,
689 GPIO51_nPIOW,
690 GPIO52_nPCE_1,
691 GPIO53_nPCE_2,
692 GPIO54_nPSKTSEL,
693 GPIO55_nPREG,
694 GPIO56_nPWAIT,
695 GPIO57_nIOIS16,
696
697 /* wakeup */
698 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
699 };
700
701 /* ----------------- e750 tc6393xb parameters ------------------ */
702
703 static struct tc6393xb_platform_data e750_tc6393xb_info = {
704 .irq_base = IRQ_BOARD_START,
705 .scr_pll2cr = 0x0cc1,
706 .scr_gper = 0,
707 .suspend = &eseries_tmio_suspend,
708 .resume = &eseries_tmio_resume,
709 .enable = &eseries_tmio_enable,
710 .disable = &eseries_tmio_disable,
711 };
712
713 static struct platform_device e750_tc6393xb_device = {
714 .name = "tc6393xb",
715 .id = -1,
716 .dev = {
717 .platform_data = &e750_tc6393xb_info,
718 },
719 .num_resources = 2,
720 .resource = eseries_tmio_resources,
721 };
722
723 static struct gpiod_lookup_table e750_audio_gpio_table = {
724 .dev_id = "e750-audio",
725 .table = {
726 GPIO_LOOKUP("gpio-pxa", GPIO_E750_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW),
727 GPIO_LOOKUP("gpio-pxa", GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
728 { },
729 },
730 };
731
732 static struct platform_device e750_audio_device = {
733 .name = "e750-audio",
734 .id = -1,
735 };
736
737 /* ------------------------------------------------------------- */
738
739 static struct platform_device *e750_devices[] __initdata = {
740 &e750_fb_device,
741 &e750_tc6393xb_device,
742 &e7xx_gpio_vbus,
743 &e750_audio_device,
744 };
745
e750_init(void)746 static void __init e750_init(void)
747 {
748 pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
749 pxa_set_ffuart_info(NULL);
750 pxa_set_btuart_info(NULL);
751 pxa_set_stuart_info(NULL);
752 clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
753 "GPIO11_CLK", NULL),
754 eseries_get_tmio_gpios();
755 gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
756 gpiod_add_lookup_table(&e750_audio_gpio_table);
757 platform_add_devices(ARRAY_AND_SIZE(e750_devices));
758 pxa_set_ac97_info(NULL);
759 pxa_set_ficp_info(&e7xx_ficp_platform_data);
760 }
761
762 MACHINE_START(E750, "Toshiba e750")
763 /* Maintainer: Ian Molton (spyro@f2s.com) */
764 .atag_offset = 0x100,
765 .map_io = pxa25x_map_io,
766 .nr_irqs = ESERIES_NR_IRQS,
767 .init_irq = pxa25x_init_irq,
768 .handle_irq = pxa25x_handle_irq,
769 .fixup = eseries_fixup,
770 .init_machine = e750_init,
771 .init_time = pxa_timer_init,
772 .restart = pxa_restart,
773 MACHINE_END
774 #endif
775
776 #ifdef CONFIG_MACH_E800
777 /* ------------------------ e800 LCD definitions ------------------------- */
778
779 static unsigned long e800_pin_config[] __initdata = {
780 /* AC97 */
781 GPIO28_AC97_BITCLK,
782 GPIO29_AC97_SDATA_IN_0,
783 GPIO30_AC97_SDATA_OUT,
784 GPIO31_AC97_SYNC,
785
786 /* tc6393xb */
787 GPIO11_3_6MHz,
788 };
789
790 static struct w100_gen_regs e800_lcd_regs = {
791 .lcd_format = 0x00008003,
792 .lcdd_cntl1 = 0x02a00000,
793 .lcdd_cntl2 = 0x0003ffff,
794 .genlcd_cntl1 = 0x000ff2a3,
795 .genlcd_cntl2 = 0x000002a3,
796 .genlcd_cntl3 = 0x000102aa,
797 };
798
799 static struct w100_mode e800_lcd_mode[2] = {
800 [0] = {
801 .xres = 480,
802 .yres = 640,
803 .left_margin = 52,
804 .right_margin = 148,
805 .upper_margin = 2,
806 .lower_margin = 6,
807 .crtc_ss = 0x80350034,
808 .crtc_ls = 0x802b0026,
809 .crtc_gs = 0x80160016,
810 .crtc_vpos_gs = 0x00020003,
811 .crtc_rev = 0x0040001d,
812 .crtc_dclk = 0xe0000000,
813 .crtc_gclk = 0x82a50049,
814 .crtc_goe = 0x80ee001c,
815 .crtc_ps1_active = 0x00000000,
816 .pll_freq = 128,
817 .pixclk_divider = 4,
818 .pixclk_divider_rotated = 6,
819 .pixclk_src = CLK_SRC_PLL,
820 .sysclk_divider = 0,
821 .sysclk_src = CLK_SRC_PLL,
822 },
823 [1] = {
824 .xres = 240,
825 .yres = 320,
826 .left_margin = 15,
827 .right_margin = 88,
828 .upper_margin = 0,
829 .lower_margin = 7,
830 .crtc_ss = 0xd010000f,
831 .crtc_ls = 0x80070003,
832 .crtc_gs = 0x80000000,
833 .crtc_vpos_gs = 0x01460147,
834 .crtc_rev = 0x00400003,
835 .crtc_dclk = 0xa1700030,
836 .crtc_gclk = 0x814b0008,
837 .crtc_goe = 0x80cc0015,
838 .crtc_ps1_active = 0x00000000,
839 .pll_freq = 100,
840 .pixclk_divider = 6, /* Wince uses 14 which gives a */
841 .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
842 .pixclk_src = CLK_SRC_PLL,
843 .sysclk_divider = 0,
844 .sysclk_src = CLK_SRC_PLL,
845 }
846 };
847
848
849 static struct w100_gpio_regs e800_w100_gpio_info = {
850 .init_data1 = 0xc13fc019,
851 .gpio_dir1 = 0x3e40df7f,
852 .gpio_oe1 = 0x003c3000,
853 .init_data2 = 0x00000000,
854 .gpio_dir2 = 0x00000000,
855 .gpio_oe2 = 0x00000000,
856 };
857
858 static struct w100_mem_info e800_w100_mem_info = {
859 .ext_cntl = 0x09640011,
860 .sdram_mode_reg = 0x00600021,
861 .ext_timing_cntl = 0x10001545,
862 .io_cntl = 0x7ddd7333,
863 .size = 0x1fffff,
864 };
865
e800_tg_change(struct w100fb_par * par)866 static void e800_tg_change(struct w100fb_par *par)
867 {
868 unsigned long tmp;
869
870 tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
871 if (par->mode->xres == 480)
872 tmp |= 0x100;
873 else
874 tmp &= ~0x100;
875 w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
876 }
877
878 static struct w100_tg_info e800_tg_info = {
879 .change = e800_tg_change,
880 };
881
882 static struct w100fb_mach_info e800_fb_info = {
883 .modelist = e800_lcd_mode,
884 .num_modes = 2,
885 .regs = &e800_lcd_regs,
886 .gpio = &e800_w100_gpio_info,
887 .mem = &e800_w100_mem_info,
888 .tg = &e800_tg_info,
889 .xtal_freq = 16000000,
890 };
891
892 static struct resource e800_fb_resources[] = {
893 [0] = {
894 .start = 0x0c000000,
895 .end = 0x0cffffff,
896 .flags = IORESOURCE_MEM,
897 },
898 };
899
900 static struct platform_device e800_fb_device = {
901 .name = "w100fb",
902 .id = -1,
903 .dev = {
904 .platform_data = &e800_fb_info,
905 },
906 .num_resources = ARRAY_SIZE(e800_fb_resources),
907 .resource = e800_fb_resources,
908 };
909
910 /* --------------------------- UDC definitions --------------------------- */
911
912 static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
913 .dev_id = "gpio-vbus",
914 .table = {
915 GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
916 "vbus", GPIO_ACTIVE_HIGH),
917 GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
918 "pullup", GPIO_ACTIVE_LOW),
919 { },
920 },
921 };
922
923 static struct platform_device e800_gpio_vbus = {
924 .name = "gpio-vbus",
925 .id = -1,
926 };
927
928
929 /* ----------------- e800 tc6393xb parameters ------------------ */
930
931 static struct tc6393xb_platform_data e800_tc6393xb_info = {
932 .irq_base = IRQ_BOARD_START,
933 .scr_pll2cr = 0x0cc1,
934 .scr_gper = 0,
935 .suspend = &eseries_tmio_suspend,
936 .resume = &eseries_tmio_resume,
937 .enable = &eseries_tmio_enable,
938 .disable = &eseries_tmio_disable,
939 };
940
941 static struct platform_device e800_tc6393xb_device = {
942 .name = "tc6393xb",
943 .id = -1,
944 .dev = {
945 .platform_data = &e800_tc6393xb_info,
946 },
947 .num_resources = 2,
948 .resource = eseries_tmio_resources,
949 };
950
951 static struct gpiod_lookup_table e800_audio_gpio_table = {
952 .dev_id = "e800-audio",
953 .table = {
954 GPIO_LOOKUP("gpio-pxa", GPIO_E800_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW),
955 GPIO_LOOKUP("gpio-pxa", GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
956 { },
957 },
958 };
959
960 static struct platform_device e800_audio_device = {
961 .name = "e800-audio",
962 .id = -1,
963 };
964
965 /* ----------------------------------------------------------------------- */
966
967 static struct platform_device *e800_devices[] __initdata = {
968 &e800_fb_device,
969 &e800_tc6393xb_device,
970 &e800_gpio_vbus,
971 &e800_audio_device,
972 };
973
e800_init(void)974 static void __init e800_init(void)
975 {
976 pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
977 pxa_set_ffuart_info(NULL);
978 pxa_set_btuart_info(NULL);
979 pxa_set_stuart_info(NULL);
980 clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
981 "GPIO11_CLK", NULL),
982 eseries_get_tmio_gpios();
983 gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
984 gpiod_add_lookup_table(&e800_audio_gpio_table);
985 platform_add_devices(ARRAY_AND_SIZE(e800_devices));
986 pxa_set_ac97_info(NULL);
987 }
988
989 MACHINE_START(E800, "Toshiba e800")
990 /* Maintainer: Ian Molton (spyro@f2s.com) */
991 .atag_offset = 0x100,
992 .map_io = pxa25x_map_io,
993 .nr_irqs = ESERIES_NR_IRQS,
994 .init_irq = pxa25x_init_irq,
995 .handle_irq = pxa25x_handle_irq,
996 .fixup = eseries_fixup,
997 .init_machine = e800_init,
998 .init_time = pxa_timer_init,
999 .restart = pxa_restart,
1000 MACHINE_END
1001 #endif
1002
