1/* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * Copyright 2011 Linaro Ltd. 4 * 5 * This file is dual-licensed: you can use it either under the terms 6 * of the GPL or the X11 license, at your option. Note that this dual 7 * licensing only applies to this file, and not this project as a 8 * whole. 9 * 10 * a) This file is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * version 2 as published by the Free Software Foundation. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include <dt-bindings/clock/imx6qdl-clock.h> 44#include <dt-bindings/gpio/gpio.h> 45#include <dt-bindings/input/input.h> 46 47/ { 48 chosen { 49 stdout-path = &uart2; 50 }; 51 52 memory@10000000 { 53 device_type = "memory"; 54 reg = <0x10000000 0x40000000>; 55 }; 56 57 regulators { 58 compatible = "simple-bus"; 59 #address-cells = <1>; 60 #size-cells = <0>; 61 62 reg_2p5v: regulator@0 { 63 compatible = "regulator-fixed"; 64 reg = <0>; 65 regulator-name = "2P5V"; 66 regulator-min-microvolt = <2500000>; 67 regulator-max-microvolt = <2500000>; 68 regulator-always-on; 69 }; 70 71 reg_3p3v: regulator@1 { 72 compatible = "regulator-fixed"; 73 reg = <1>; 74 regulator-name = "3P3V"; 75 regulator-min-microvolt = <3300000>; 76 regulator-max-microvolt = <3300000>; 77 regulator-always-on; 78 }; 79 80 reg_usb_otg_vbus: regulator@2 { 81 compatible = "regulator-fixed"; 82 reg = <2>; 83 regulator-name = "usb_otg_vbus"; 84 regulator-min-microvolt = <5000000>; 85 regulator-max-microvolt = <5000000>; 86 gpio = <&gpio3 22 0>; 87 enable-active-high; 88 }; 89 90 reg_can_xcvr: regulator@3 { 91 compatible = "regulator-fixed"; 92 reg = <3>; 93 regulator-name = "CAN XCVR"; 94 regulator-min-microvolt = <3300000>; 95 regulator-max-microvolt = <3300000>; 96 pinctrl-names = "default"; 97 pinctrl-0 = <&pinctrl_can_xcvr>; 98 gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; 99 }; 100 101 reg_1p5v: regulator@4 { 102 compatible = "regulator-fixed"; 103 reg = <4>; 104 regulator-name = "1P5V"; 105 regulator-min-microvolt = <1500000>; 106 regulator-max-microvolt = <1500000>; 107 regulator-always-on; 108 }; 109 110 reg_1p8v: regulator@5 { 111 compatible = "regulator-fixed"; 112 reg = <5>; 113 regulator-name = "1P8V"; 114 regulator-min-microvolt = <1800000>; 115 regulator-max-microvolt = <1800000>; 116 regulator-always-on; 117 }; 118 119 reg_2p8v: regulator@6 { 120 compatible = "regulator-fixed"; 121 reg = <6>; 122 regulator-name = "2P8V"; 123 regulator-min-microvolt = <2800000>; 124 regulator-max-microvolt = <2800000>; 125 regulator-always-on; 126 }; 127 128 reg_usb_h1_vbus: regulator@7 { 129 compatible = "regulator-fixed"; 130 reg = <7>; 131 pinctrl-names = "default"; 132 pinctrl-0 = <&pinctrl_usbh1>; 133 regulator-name = "usb_h1_vbus"; 134 regulator-min-microvolt = <3300000>; 135 regulator-max-microvolt = <3300000>; 136 gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; 137 enable-active-high; 138 }; 139 }; 140 141 mipi_xclk: mipi_xclk { 142 compatible = "pwm-clock"; 143 #clock-cells = <0>; 144 clock-frequency = <22000000>; 145 clock-output-names = "mipi_pwm3"; 146 pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */ 147 status = "okay"; 148 }; 149 150 gpio-keys { 151 compatible = "gpio-keys"; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&pinctrl_gpio_keys>; 154 155 power { 156 label = "Power Button"; 157 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; 158 linux,code = <KEY_POWER>; 159 wakeup-source; 160 }; 161 162 menu { 163 label = "Menu"; 164 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 165 linux,code = <KEY_MENU>; 166 }; 167 168 home { 169 label = "Home"; 170 gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; 171 linux,code = <KEY_HOME>; 172 }; 173 174 back { 175 label = "Back"; 176 gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; 177 linux,code = <KEY_BACK>; 178 }; 179 180 volume-up { 181 label = "Volume Up"; 182 gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; 183 linux,code = <KEY_VOLUMEUP>; 184 }; 185 186 volume-down { 187 label = "Volume Down"; 188 gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; 189 linux,code = <KEY_VOLUMEDOWN>; 190 }; 191 }; 192 193 sound { 194 compatible = "fsl,imx6q-sabrelite-sgtl5000", 195 "fsl,imx-audio-sgtl5000"; 196 model = "imx6q-sabrelite-sgtl5000"; 197 ssi-controller = <&ssi1>; 198 audio-codec = <&codec>; 199 audio-routing = 200 "MIC_IN", "Mic Jack", 201 "Mic Jack", "Mic Bias", 202 "Headphone Jack", "HP_OUT"; 203 mux-int-port = <1>; 204 mux-ext-port = <4>; 205 }; 206 207 backlight_lcd: backlight-lcd { 208 compatible = "pwm-backlight"; 209 pwms = <&pwm1 0 5000000>; 210 brightness-levels = <0 4 8 16 32 64 128 255>; 211 default-brightness-level = <7>; 212 power-supply = <®_3p3v>; 213 status = "okay"; 214 }; 215 216 backlight_lvds: backlight-lvds { 217 compatible = "pwm-backlight"; 218 pwms = <&pwm4 0 5000000>; 219 brightness-levels = <0 4 8 16 32 64 128 255>; 220 default-brightness-level = <7>; 221 power-supply = <®_3p3v>; 222 status = "okay"; 223 }; 224 225 lcd_display: disp0 { 226 compatible = "fsl,imx-parallel-display"; 227 #address-cells = <1>; 228 #size-cells = <0>; 229 interface-pix-fmt = "bgr666"; 230 pinctrl-names = "default"; 231 pinctrl-0 = <&pinctrl_j15>; 232 status = "okay"; 233 234 port@0 { 235 reg = <0>; 236 237 lcd_display_in: endpoint { 238 remote-endpoint = <&ipu1_di0_disp0>; 239 }; 240 }; 241 242 port@1 { 243 reg = <1>; 244 245 lcd_display_out: endpoint { 246 remote-endpoint = <&lcd_panel_in>; 247 }; 248 }; 249 }; 250 251 panel-lcd { 252 compatible = "okaya,rs800480t-7x0gp"; 253 backlight = <&backlight_lcd>; 254 255 port { 256 lcd_panel_in: endpoint { 257 remote-endpoint = <&lcd_display_out>; 258 }; 259 }; 260 }; 261 262 panel-lvds0 { 263 compatible = "hannstar,hsd100pxn1"; 264 backlight = <&backlight_lvds>; 265 266 port { 267 panel_in: endpoint { 268 remote-endpoint = <&lvds0_out>; 269 }; 270 }; 271 }; 272}; 273 274&ipu1_csi0_from_ipu1_csi0_mux { 275 bus-width = <8>; 276 data-shift = <12>; /* Lines 19:12 used */ 277 hsync-active = <1>; 278 vync-active = <1>; 279}; 280 281&ipu1_csi0_mux_from_parallel_sensor { 282 remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; 283}; 284 285&ipu1_csi0 { 286 pinctrl-names = "default"; 287 pinctrl-0 = <&pinctrl_ipu1_csi0>; 288}; 289 290&audmux { 291 pinctrl-names = "default"; 292 pinctrl-0 = <&pinctrl_audmux>; 293 status = "okay"; 294}; 295 296&can1 { 297 pinctrl-names = "default"; 298 pinctrl-0 = <&pinctrl_can1>; 299 xceiver-supply = <®_can_xcvr>; 300 status = "okay"; 301}; 302 303&clks { 304 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 305 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 306 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 307 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 308}; 309 310&ecspi1 { 311 cs-gpios = <&gpio3 19 0>; 312 pinctrl-names = "default"; 313 pinctrl-0 = <&pinctrl_ecspi1>; 314 status = "okay"; 315 316 flash: m25p80@0 { 317 compatible = "sst,sst25vf016b", "jedec,spi-nor"; 318 spi-max-frequency = <20000000>; 319 reg = <0>; 320 }; 321}; 322 323&fec { 324 pinctrl-names = "default"; 325 pinctrl-0 = <&pinctrl_enet>; 326 phy-mode = "rgmii"; 327 phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 328 txen-skew-ps = <0>; 329 txc-skew-ps = <3000>; 330 rxdv-skew-ps = <0>; 331 rxc-skew-ps = <3000>; 332 rxd0-skew-ps = <0>; 333 rxd1-skew-ps = <0>; 334 rxd2-skew-ps = <0>; 335 rxd3-skew-ps = <0>; 336 txd0-skew-ps = <0>; 337 txd1-skew-ps = <0>; 338 txd2-skew-ps = <0>; 339 txd3-skew-ps = <0>; 340 status = "okay"; 341}; 342 343&hdmi { 344 ddc-i2c-bus = <&i2c2>; 345 status = "okay"; 346}; 347 348&i2c1 { 349 clock-frequency = <100000>; 350 pinctrl-names = "default"; 351 pinctrl-0 = <&pinctrl_i2c1>; 352 status = "okay"; 353 354 codec: sgtl5000@a { 355 compatible = "fsl,sgtl5000"; 356 reg = <0x0a>; 357 clocks = <&clks IMX6QDL_CLK_CKO>; 358 VDDA-supply = <®_2p5v>; 359 VDDIO-supply = <®_3p3v>; 360 }; 361}; 362 363&i2c2 { 364 clock-frequency = <100000>; 365 pinctrl-names = "default"; 366 pinctrl-0 = <&pinctrl_i2c2>; 367 status = "okay"; 368 369 ov5640: camera@40 { 370 compatible = "ovti,ov5640"; 371 pinctrl-names = "default"; 372 pinctrl-0 = <&pinctrl_ov5640>; 373 reg = <0x40>; 374 clocks = <&mipi_xclk>; 375 clock-names = "xclk"; 376 DOVDD-supply = <®_1p8v>; 377 AVDD-supply = <®_2p8v>; 378 DVDD-supply = <®_1p5v>; 379 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */ 380 powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ 381 382 port { 383 ov5640_to_mipi_csi2: endpoint { 384 remote-endpoint = <&mipi_csi2_in>; 385 clock-lanes = <0>; 386 data-lanes = <1 2>; 387 }; 388 }; 389 }; 390 391 ov5642: camera@42 { 392 compatible = "ovti,ov5642"; 393 pinctrl-names = "default"; 394 pinctrl-0 = <&pinctrl_ov5642>; 395 clocks = <&clks IMX6QDL_CLK_CKO2>; 396 clock-names = "xclk"; 397 reg = <0x42>; 398 reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; 399 powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; 400 gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; 401 status = "disabled"; 402 403 port { 404 ov5642_to_ipu1_csi0_mux: endpoint { 405 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; 406 bus-width = <8>; 407 hsync-active = <1>; 408 vsync-active = <1>; 409 }; 410 }; 411 }; 412}; 413 414&i2c3 { 415 clock-frequency = <100000>; 416 pinctrl-names = "default"; 417 pinctrl-0 = <&pinctrl_i2c3>; 418 status = "okay"; 419}; 420 421&iomuxc { 422 pinctrl-names = "default"; 423 pinctrl-0 = <&pinctrl_hog>; 424 425 imx6q-sabrelite { 426 pinctrl_hog: hoggrp { 427 fsl,pins = < 428 /* SGTL5000 sys_mclk */ 429 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 430 >; 431 }; 432 433 pinctrl_audmux: audmuxgrp { 434 fsl,pins = < 435 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 436 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 437 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 438 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 439 >; 440 }; 441 442 pinctrl_can1: can1grp { 443 fsl,pins = < 444 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 445 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 446 >; 447 }; 448 449 pinctrl_can_xcvr: can-xcvrgrp { 450 fsl,pins = < 451 /* Flexcan XCVR enable */ 452 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 453 >; 454 }; 455 456 pinctrl_ecspi1: ecspi1grp { 457 fsl,pins = < 458 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 459 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 460 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 461 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ 462 >; 463 }; 464 465 pinctrl_enet: enetgrp { 466 fsl,pins = < 467 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 468 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 469 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 470 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 471 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 472 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 473 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 474 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 475 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 476 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 477 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 478 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 479 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 480 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 481 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 482 /* Phy reset */ 483 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 484 >; 485 }; 486 487 pinctrl_gpio_keys: gpio-keysgrp { 488 fsl,pins = < 489 /* Power Button */ 490 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 491 /* Menu Button */ 492 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 493 /* Home Button */ 494 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 495 /* Back Button */ 496 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 497 /* Volume Up Button */ 498 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 499 /* Volume Down Button */ 500 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 501 >; 502 }; 503 504 pinctrl_i2c1: i2c1grp { 505 fsl,pins = < 506 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 507 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 508 >; 509 }; 510 511 pinctrl_i2c2: i2c2grp { 512 fsl,pins = < 513 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 514 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 515 >; 516 }; 517 518 pinctrl_i2c3: i2c3grp { 519 fsl,pins = < 520 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 521 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 522 >; 523 }; 524 525 pinctrl_ipu1_csi0: ipu1csi0grp { 526 fsl,pins = < 527 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 528 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 529 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 530 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 531 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 532 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 533 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 534 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 535 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 536 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 537 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 538 MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 539 >; 540 }; 541 542 pinctrl_j15: j15grp { 543 fsl,pins = < 544 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 545 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 546 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 547 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 548 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 549 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 550 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 551 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 552 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 553 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 554 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 555 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 556 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 557 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 558 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 559 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 560 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 561 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 562 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 563 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 564 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 565 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 566 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 567 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 568 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 569 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 570 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 571 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 572 >; 573 }; 574 575 pinctrl_ov5640: ov5640grp { 576 fsl,pins = < 577 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 578 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 579 >; 580 }; 581 582 pinctrl_ov5642: ov5642grp { 583 fsl,pins = < 584 MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 585 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 586 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 587 MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 588 >; 589 }; 590 591 pinctrl_pwm1: pwm1grp { 592 fsl,pins = < 593 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 594 >; 595 }; 596 597 pinctrl_pwm3: pwm3grp { 598 fsl,pins = < 599 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 600 >; 601 }; 602 603 pinctrl_pwm4: pwm4grp { 604 fsl,pins = < 605 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 606 >; 607 }; 608 609 pinctrl_uart1: uart1grp { 610 fsl,pins = < 611 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 612 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 613 >; 614 }; 615 616 pinctrl_uart2: uart2grp { 617 fsl,pins = < 618 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 619 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 620 >; 621 }; 622 623 pinctrl_usbh1: usbh1grp { 624 fsl,pins = < 625 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 626 >; 627 }; 628 629 pinctrl_usbotg: usbotggrp { 630 fsl,pins = < 631 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 632 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 633 /* power enable, high active */ 634 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 635 >; 636 }; 637 638 pinctrl_usdhc3: usdhc3grp { 639 fsl,pins = < 640 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 641 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 642 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 643 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 644 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 645 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 646 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ 647 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */ 648 >; 649 }; 650 651 pinctrl_usdhc4: usdhc4grp { 652 fsl,pins = < 653 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 654 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 655 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 656 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 657 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 658 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 659 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ 660 >; 661 }; 662 }; 663}; 664 665&ipu1_di0_disp0 { 666 remote-endpoint = <&lcd_display_in>; 667}; 668 669&ldb { 670 status = "okay"; 671 672 lvds-channel@0 { 673 status = "okay"; 674 675 port@4 { 676 reg = <4>; 677 678 lvds0_out: endpoint { 679 remote-endpoint = <&panel_in>; 680 }; 681 }; 682 }; 683}; 684 685&pcie { 686 status = "okay"; 687}; 688 689&pwm1 { 690 pinctrl-names = "default"; 691 pinctrl-0 = <&pinctrl_pwm1>; 692 status = "okay"; 693}; 694 695&pwm3 { 696 pinctrl-names = "default"; 697 pinctrl-0 = <&pinctrl_pwm3>; 698 status = "okay"; 699}; 700 701&pwm4 { 702 pinctrl-names = "default"; 703 pinctrl-0 = <&pinctrl_pwm4>; 704 status = "okay"; 705}; 706 707&ssi1 { 708 status = "okay"; 709}; 710 711&uart1 { 712 pinctrl-names = "default"; 713 pinctrl-0 = <&pinctrl_uart1>; 714 status = "okay"; 715}; 716 717&uart2 { 718 pinctrl-names = "default"; 719 pinctrl-0 = <&pinctrl_uart2>; 720 status = "okay"; 721}; 722 723&usbh1 { 724 vbus-supply = <®_usb_h1_vbus>; 725 status = "okay"; 726}; 727 728&usbotg { 729 vbus-supply = <®_usb_otg_vbus>; 730 pinctrl-names = "default"; 731 pinctrl-0 = <&pinctrl_usbotg>; 732 disable-over-current; 733 status = "okay"; 734}; 735 736&usdhc3 { 737 pinctrl-names = "default"; 738 pinctrl-0 = <&pinctrl_usdhc3>; 739 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 740 wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 741 vmmc-supply = <®_3p3v>; 742 status = "okay"; 743}; 744 745&usdhc4 { 746 pinctrl-names = "default"; 747 pinctrl-0 = <&pinctrl_usdhc4>; 748 cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; 749 vmmc-supply = <®_3p3v>; 750 status = "okay"; 751}; 752 753&mipi_csi { 754 status = "okay"; 755 756 port@0 { 757 reg = <0>; 758 759 mipi_csi2_in: endpoint { 760 remote-endpoint = <&ov5640_to_mipi_csi2>; 761 clock-lanes = <0>; 762 data-lanes = <1 2>; 763 }; 764 }; 765}; 766
