1/* 2 * Copyright 2014 General Electric Company 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42/dts-v1/; 43 44#include "imx53.dtsi" 45#include <dt-bindings/input/input.h> 46 47/ { 48 model = "General Electric CS ONE"; 49 compatible = "ge,imx53-cpuvo", "fsl,imx53"; 50 51 aliases { 52 spi0 = &cspi; 53 spi1 = &ecspi1; 54 spi2 = &ecspi2; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 memory@70000000 { 62 device_type = "memory"; 63 reg = <0x70000000 0x20000000>, 64 <0xb0000000 0x20000000>; 65 }; 66 67 cko2_11M: sgtl-clock-cko2 { 68 compatible = "fixed-clock"; 69 #clock-cells = <0>; 70 clock-frequency = <11289600>; 71 }; 72 73 sgtlsound: sound { 74 compatible = "fsl,imx53-cpuvo-sgtl5000", 75 "fsl,imx-audio-sgtl5000"; 76 model = "imx53-cpuvo-sgtl5000"; 77 ssi-controller = <&ssi2>; 78 audio-codec = <&sgtl5000>; 79 audio-routing = 80 "MIC_IN", "Mic Jack", 81 "Mic Jack", "Mic Bias", 82 "Headphone Jack", "HP_OUT"; 83 mux-int-port = <2>; 84 mux-ext-port = <6>; 85 }; 86 87 reg_sgtl5k: regulator-sgtl5k { 88 compatible = "regulator-fixed"; 89 regulator-name = "regulator-sgtl5k"; 90 regulator-min-microvolt = <3300000>; 91 regulator-max-microvolt = <3300000>; 92 regulator-always-on; 93 }; 94 95 reg_usb_otg_vbus: regulator-usb-otg-vbus { 96 compatible = "regulator-fixed"; 97 regulator-name = "usbotg_vbus"; 98 regulator-min-microvolt = <5000000>; 99 regulator-max-microvolt = <5000000>; 100 pinctrl-0 = <&pinctrl_usb_otg_vbus>; 101 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; 102 enable-active-high; 103 }; 104 105 reg_usb_vbus: regulator-usb-vbus { 106 compatible = "regulator-fixed"; 107 regulator-name = "usbh1_vbus"; 108 regulator-min-microvolt = <5000000>; 109 regulator-max-microvolt = <5000000>; 110 regulator-always-on; 111 }; 112 113 reg_usbh2_vbus: regulator-usbh2-vbus { 114 compatible = "regulator-fixed"; 115 regulator-name = "usbh2_vbus"; 116 regulator-min-microvolt = <5000000>; 117 regulator-max-microvolt = <5000000>; 118 pinctrl-names = "default"; 119 pinctrl-0 = <&pinctrl_usbh2_vbus>; 120 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; 121 enable-active-high; 122 }; 123 124 reg_usbh3_vbus: regulator-usbh3-vbus { 125 compatible = "regulator-fixed"; 126 regulator-name = "usbh3_vbus"; 127 regulator-min-microvolt = <5000000>; 128 regulator-max-microvolt = <5000000>; 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_usbh3_vbus>; 131 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; 132 enable-active-high; 133 }; 134 135 reg_tsiref: regulator-tsiref { 136 compatible = "regulator-fixed"; 137 regulator-name = "tsiref"; 138 regulator-min-microvolt = <2500000>; 139 regulator-max-microvolt = <2500000>; 140 regulator-always-on; 141 }; 142 143 reg_3v3: regulator-3v3 { 144 /* TPS54320 */ 145 compatible = "regulator-fixed"; 146 regulator-name = "3V3"; 147 regulator-min-microvolt = <3300000>; 148 regulator-max-microvolt = <3300000>; 149 regulator-always-on; 150 }; 151 152 reg_3v3_lcd: regulator-3v3-lcd { 153 /* MIC2009 */ 154 compatible = "regulator-fixed"; 155 regulator-name = "LCD_3V3"; 156 vin-supply = <®_3v3>; 157 regulator-min-microvolt = <3300000>; 158 regulator-max-microvolt = <3300000>; 159 regulator-always-on; 160 }; 161 162 pwm_bl: backlight { 163 compatible = "pwm-backlight"; 164 pwms = <&pwm2 0 50000>; 165 brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 166 38 40 43 45 48 51 53 56 58 61 63 66 68 71 167 73 76 79 81 84 86 89 91 94 96 99 102 104 168 107 109 112 114 117 119 122 124 127 130 169 132 135 137 140 142 145 147 150 153 155 170 158 160 163 165 168 170 173 175 178 181 171 183 186 188 191 193 196 198 201 204 206 172 209 211 214 216 219 221 224 226 229 232 173 234 237 239 242 244 247 249 252 255>; 174 default-brightness-level = <0>; 175 enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; 176 power-supply = <®_3v3_lcd>; 177 }; 178 179 leds { 180 compatible = "pwm-leds"; 181 182 alarm-brightness { 183 pwms = <&pwm1 0 100000>; 184 max-brightness = <255>; 185 }; 186 }; 187 188 gpio-poweroff { 189 compatible = "gpio-poweroff"; 190 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 191 }; 192 193 gpio-restart { 194 compatible = "gpio-restart"; 195 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 196 active-delay = <100>; 197 inactive-delay = <10>; 198 wait-delay = <100>; 199 }; 200 201 power-gpio-keys { 202 compatible = "gpio-keys"; 203 204 power-button { 205 label = "Power button"; 206 gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; 207 linux,code = <KEY_POWER>; 208 }; 209 }; 210 211 touch-lock-key { 212 compatible = "gpio-keys"; 213 214 touch-lock-button { 215 label = "Touch lock button"; 216 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 217 linux,code = <KEY_F12>; 218 }; 219 }; 220 221 usbphy2: usbphy-2 { 222 compatible = "usb-nop-xceiv"; 223 vcc-supply = <®_3v3>; 224 reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; 225 clock-names = "main_clk"; 226 clock-frequency = <24000000>; 227 clocks = <&clks IMX5_CLK_CKO2>; 228 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; 229 assigned-clock-parents = <&clks IMX5_CLK_OSC>; 230 }; 231 232 usbphy3: usbphy-3 { 233 compatible = "usb-nop-xceiv"; 234 vcc-supply = <®_3v3>; 235 reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; 236 clock-names = "main_clk"; 237 238 clock-frequency = <24000000>; 239 clocks = <&clks IMX5_CLK_CKO2>; 240 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; 241 assigned-clock-parents = <&clks IMX5_CLK_OSC>; 242 }; 243 244 panel-lvds0 { 245 compatible = "nvd,9128"; 246 power-supply = <®_3v3_lcd>; 247 248 port { 249 panel_in_lvds0: endpoint { 250 remote-endpoint = <&lvds0_out>; 251 }; 252 }; 253 }; 254}; 255 256&usbphy0 { 257 vcc-supply = <®_3v3>; 258}; 259 260&usbphy1 { 261 vcc-supply = <®_3v3>; 262}; 263 264&audmux { 265 pinctrl-names = "default"; 266 pinctrl-0 = <&pinctrl_audmux>; 267 status = "okay"; 268}; 269 270&cpu0 { 271 /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ 272 operating-points = < 273 /* kHz uV */ 274 166666 850000 275 400000 900000 276 800000 1050000 277 1000000 1200000 278 >; 279}; 280 281&ecspi1 { 282 pinctrl-names = "default"; 283 pinctrl-0 = <&pinctrl_ecspi1>; 284 cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW 285 &gpio4 10 GPIO_ACTIVE_LOW 286 &gpio4 11 GPIO_ACTIVE_LOW 287 &gpio4 12 GPIO_ACTIVE_LOW>; 288 status = "okay"; 289 290 spidev0: spi@0 { 291 compatible = "ge,achc"; 292 reg = <0>; 293 spi-max-frequency = <1000000>; 294 }; 295 296 spidev1: spi@1 { 297 compatible = "ge,achc"; 298 reg = <1>; 299 spi-max-frequency = <1000000>; 300 }; 301 302 gpioxra0: gpio@2 { 303 compatible = "exar,xra1403"; 304 reg = <2>; 305 gpio-controller; 306 #gpio-cells = <2>; 307 spi-max-frequency = <1000000>; 308 }; 309 310 gpioxra1: gpio@3 { 311 compatible = "exar,xra1403"; 312 reg = <3>; 313 gpio-controller; 314 #gpio-cells = <2>; 315 spi-max-frequency = <1000000>; 316 }; 317}; 318 319&ecspi2 { 320 pinctrl-names = "default"; 321 pinctrl-0 = <&pinctrl_ecspi2>; 322 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; 323 status = "okay"; 324 325 da9053@0 { 326 compatible = "dlg,da9053-aa"; 327 reg = <0>; 328 interrupt-parent = <&gpio3>; 329 interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 330 spi-max-frequency = <1000000>; 331 dlg,tsi-as-adc; 332 tsiref-supply = <®_tsiref>; 333 334 regulators { 335 buck1_reg: buck1 { 336 regulator-name = "BUCKCORE"; 337 regulator-min-microvolt = <500000>; 338 regulator-max-microvolt = <2075000>; 339 regulator-always-on; 340 }; 341 342 buck2_reg: buck2 { 343 regulator-name = "BUCKPRO"; 344 regulator-min-microvolt = <500000>; 345 regulator-max-microvolt = <2075000>; 346 regulator-always-on; 347 }; 348 349 buck3_reg: buck3 { 350 regulator-name = "BUCKMEM"; 351 regulator-min-microvolt = <925000>; 352 regulator-max-microvolt = <2500000>; 353 regulator-always-on; 354 }; 355 356 buck4_reg: buck4 { 357 regulator-name = "BUCKPERI"; 358 regulator-min-microvolt = <1800000>; 359 regulator-max-microvolt = <3600000>; 360 regulator-always-on; 361 }; 362 363 ldo1_reg: ldo1 { 364 regulator-name = "ldo1_1v3"; 365 regulator-min-microvolt = <600000>; 366 regulator-max-microvolt = <1800000>; 367 regulator-always-on; 368 }; 369 370 ldo2_reg: ldo2 { 371 regulator-name = "ldo2_1v3"; 372 regulator-min-microvolt = <600000>; 373 regulator-max-microvolt = <1800000>; 374 regulator-always-on; 375 }; 376 377 ldo3_reg: ldo3 { 378 regulator-name = "ldo3_3v3"; 379 regulator-min-microvolt = <1725000>; 380 regulator-max-microvolt = <3300000>; 381 regulator-always-on; 382 }; 383 384 ldo4_reg: ldo4 { 385 regulator-name = "ldo4_2v775"; 386 regulator-min-microvolt = <1725000>; 387 regulator-max-microvolt = <3300000>; 388 regulator-always-on; 389 }; 390 391 ldo5_reg: ldo5 { 392 regulator-name = "ldo5_3v3"; 393 regulator-min-microvolt = <1200000>; 394 regulator-max-microvolt = <3600000>; 395 regulator-always-on; 396 }; 397 398 ldo6_reg: ldo6 { 399 regulator-name = "ldo6_1v3"; 400 regulator-min-microvolt = <1200000>; 401 regulator-max-microvolt = <3600000>; 402 regulator-always-on; 403 }; 404 405 ldo7_reg: ldo7 { 406 regulator-name = "ldo7_2v75"; 407 regulator-min-microvolt = <1200000>; 408 regulator-max-microvolt = <3600000>; 409 regulator-always-on; 410 }; 411 412 ldo8_reg: ldo8 { 413 regulator-name = "ldo8_1v8"; 414 regulator-min-microvolt = <1200000>; 415 regulator-max-microvolt = <3600000>; 416 regulator-always-on; 417 }; 418 419 ldo9_reg: ldo9 { 420 regulator-name = "ldo9_1v5"; 421 regulator-min-microvolt = <1250000>; 422 regulator-max-microvolt = <3650000>; 423 regulator-always-on; 424 }; 425 426 ldo10_reg: ldo10 { 427 regulator-name = "ldo10_1v3"; 428 regulator-min-microvolt = <1200000>; 429 regulator-max-microvolt = <3600000>; 430 regulator-always-on; 431 }; 432 }; 433 }; 434 435}; 436 437&esdhc3 { 438 pinctrl-names = "default"; 439 pinctrl-0 = <&pinctrl_esdhc3>; 440 bus-width = <8>; 441 status = "okay"; 442}; 443 444&fec { 445 pinctrl-names = "default"; 446 pinctrl-0 = <&pinctrl_fec>; 447 phy-supply = <®_3v3>; 448 phy-mode = "rmii"; 449 phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; 450 status = "okay"; 451}; 452 453&i2c1 { 454 pinctrl-names = "default", "gpio"; 455 pinctrl-0 = <&pinctrl_i2c1>; 456 pinctrl-1 = <&pinctrl_i2c1_gpio>; 457 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 458 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 459 status = "okay"; 460 461 i2c-switch@70 { 462 compatible = "nxp,pca9547"; 463 #address-cells = <1>; 464 #size-cells = <0>; 465 reg = <0x70>; 466 reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; 467 468 i2c4: i2c@0 { 469 #address-cells = <1>; 470 #size-cells = <0>; 471 reg = <0>; 472 473 sgtl5000: codec@a { 474 compatible = "fsl,sgtl5000"; 475 reg = <0xa>; 476 #sound-dai-cells = <0>; 477 VDDA-supply = <®_sgtl5k>; 478 VDDIO-supply = <®_sgtl5k>; 479 clocks = <&cko2_11M>; 480 status = "okay"; 481 }; 482 }; 483 484 i2c5: i2c@1 { 485 #address-cells = <1>; 486 #size-cells = <0>; 487 reg = <1>; 488 489 rtc@30 { 490 compatible = "sii,s35390a"; 491 reg = <0x30>; 492 }; 493 494 temp@48 { 495 compatible = "ti,tmp112"; 496 reg = <0x48>; 497 }; 498 499 mma8453q: accelerometer@1c { 500 compatible = "fsl,mma8453"; 501 reg = <0x1c>; 502 interrupt-parent = <&gpio1>; 503 interrupts = <6 IRQ_TYPE_NONE>; 504 interrupt-names = "INT1"; 505 }; 506 507 mpl3115: pressure-sensor@60 { 508 compatible = "fsl,mpl3115"; 509 reg = <0x60>; 510 }; 511 512 eeprom: eeprom@50 { 513 compatible = "atmel,24c08"; 514 reg = <0x50>; 515 }; 516 }; 517 518 i2c6: i2c@2 { 519 #address-cells = <1>; 520 #size-cells = <0>; 521 reg = <2>; 522 }; 523 524 i2c7: i2c@3 { 525 #address-cells = <1>; 526 #size-cells = <0>; 527 reg = <3>; 528 }; 529 530 i2c8: i2c@4 { 531 #address-cells = <1>; 532 #size-cells = <0>; 533 reg = <4>; 534 }; 535 536 i2c9: i2c@5 { 537 #address-cells = <1>; 538 #size-cells = <0>; 539 reg = <5>; 540 }; 541 542 i2c10: i2c@6 { 543 #address-cells = <1>; 544 #size-cells = <0>; 545 reg = <6>; 546 }; 547 548 i2c11: i2c@7 { 549 #address-cells = <1>; 550 #size-cells = <0>; 551 reg = <7>; 552 }; 553 }; 554}; 555 556&i2c2 { 557 pinctrl-names = "default", "gpio"; 558 pinctrl-0 = <&pinctrl_i2c2>; 559 pinctrl-1 = <&pinctrl_i2c2_gpio>; 560 sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 561 scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; 562 status = "okay"; 563 564 touchscreen@4b { 565 compatible = "atmel,maxtouch"; 566 reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; 567 reg = <0x4b>; 568 interrupt-parent = <&gpio5>; 569 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 570 }; 571}; 572 573&i2c3 { 574 pinctrl-names = "default", "gpio"; 575 pinctrl-0 = <&pinctrl_i2c3>; 576 pinctrl-1 = <&pinctrl_i2c3_gpio>; 577 sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 578 scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 579 status = "okay"; 580}; 581 582&ldb { 583 status = "okay"; 584 585 lvds0: lvds-channel@0 { 586 status = "okay"; 587 588 port@2 { 589 lvds0_out: endpoint { 590 remote-endpoint = <&panel_in_lvds0>; 591 }; 592 }; 593 }; 594}; 595 596&pmu { 597 secure-reg-access; 598}; 599 600&pwm1 { 601 pinctrl-names = "default"; 602 pinctrl-0 = <&pinctrl_pwm1>; 603 status = "okay"; 604}; 605 606&pwm2 { 607 pinctrl-names = "default"; 608 pinctrl-0 = <&pinctrl_pwm2>; 609 status = "okay"; 610}; 611 612&ssi2 { 613 status = "okay"; 614}; 615 616&uart1 { 617 pinctrl-names = "default"; 618 pinctrl-0 = <&pinctrl_uart1>; 619 status = "okay"; 620}; 621 622&uart2 { 623 pinctrl-names = "default"; 624 pinctrl-0 = <&pinctrl_uart2>; 625 status = "okay"; 626}; 627 628&uart3 { 629 pinctrl-names = "default"; 630 pinctrl-0 = <&pinctrl_uart3>; 631 uart-has-rtscts; 632 status = "okay"; 633}; 634 635&uart4 { 636 pinctrl-names = "default"; 637 pinctrl-0 = <&pinctrl_uart4>; 638 status = "okay"; 639}; 640 641&uart5 { 642 pinctrl-names = "default"; 643 pinctrl-0 = <&pinctrl_uart5>; 644 status = "okay"; 645}; 646 647&usbotg { 648 dr_mode = "otg"; 649 phy_type = "utmi"; 650 vbus-supply = <®_usb_otg_vbus>; 651 pinctrl-0 = <&pinctrl_usb_otg>; 652 status = "okay"; 653}; 654 655&usbh1 { 656 vbus-supply = <®_usb_vbus>; 657 phy_type = "utmi"; 658 dr_mode = "host"; 659 status = "okay"; 660}; 661 662&usbh2 { 663 pinctrl-names = "default"; 664 pinctrl-0 = <&pinctrl_usbh2>; 665 phy_type = "ulpi"; 666 dr_mode = "host"; 667 fsl,usbphy = <&usbphy2>; 668 vbus-supply = <®_usbh2_vbus>; 669 status = "okay"; 670}; 671 672&usbh3 { 673 pinctrl-names = "default"; 674 pinctrl-0 = <&pinctrl_usbh3>; 675 phy_type = "ulpi"; 676 dr_mode = "host"; 677 vbus-supply = <®_usbh3_vbus>; 678 fsl,usbphy = <&usbphy3>; 679 status = "okay"; 680}; 681 682&iomuxc { 683 pinctrl-names = "default"; 684 pinctrl-0 = <&pinctrl_hog_rev6>; 685 686 pinctrl_audmux: audmuxgrp { 687 fsl,pins = < 688 MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400 689 MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400 690 MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400 691 MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400 692 MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400 693 MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400 694 MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400 695 MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400 696 >; 697 }; 698 699 pinctrl_ecspi1: ecspi1grp { 700 fsl,pins = < 701 MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400 702 MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400 703 MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400 704 /* ECSPI1_SS0, must treat as GPIO for EzPort */ 705 MX53_PAD_DISP0_DAT23__GPIO5_17 0x400 706 MX53_PAD_KEY_COL2__GPIO4_10 0x0 707 MX53_PAD_KEY_ROW2__GPIO4_11 0x0 708 MX53_PAD_KEY_COL3__GPIO4_12 0x0 709 >; 710 }; 711 712 pinctrl_ecspi2: ecspi2grp { 713 fsl,pins = < 714 MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0 715 MX53_PAD_EIM_OE__ECSPI2_MISO 0x0 716 MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0 717 MX53_PAD_EIM_RW__GPIO2_26 0x0 718 >; 719 }; 720 721 pinctrl_esdhc1: esdhc1grp { 722 fsl,pins = < 723 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 724 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 725 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 726 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 727 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 728 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 729 >; 730 }; 731 732 pinctrl_esdhc3: esdhc3grp { 733 fsl,pins = < 734 MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 735 MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 736 MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 737 MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 738 MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 739 MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 740 MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 741 MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 742 MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 743 MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 744 >; 745 }; 746 747 pinctrl_fec: fecgrp { 748 fsl,pins = < 749 MX53_PAD_FEC_MDC__FEC_MDC 0x0 750 MX53_PAD_FEC_MDIO__FEC_MDIO 0x0 751 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0 752 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0 753 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0 754 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0 755 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0 756 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0 757 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0 758 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0 759 >; 760 }; 761 762 pinctrl_hog_rev6: hoggrp { 763 fsl,pins = < 764 /* CKO2 */ 765 MX53_PAD_GPIO_3__CCM_CLKO2 0x4 766 /* DEFIB_SYNC_MARKER_IN_IRQ */ 767 MX53_PAD_GPIO_5__GPIO1_5 0x0 768 /* ACCELEROMETER_DATA_RDY_N */ 769 MX53_PAD_GPIO_6__GPIO1_6 0x0 770 /* TEMPERATURE_ALERT_N */ 771 MX53_PAD_GPIO_7__GPIO1_7 0x0 772 /* BAROMETRIC_PRESSURE_DATA_RDY_N */ 773 MX53_PAD_GPIO_8__GPIO1_8 0x0 774 /* DOCKING_I2C_INTERFACE_IRQ_N */ 775 MX53_PAD_PATA_DATA4__GPIO2_4 0x0 776 /* PWR_OUT_TO_DOCK_FAULT_N */ 777 MX53_PAD_PATA_DATA5__GPIO2_5 0x0 778 /* ENABLE_PWR_TO_DOCK_N */ 779 MX53_PAD_PATA_DATA6__GPIO2_6 0x0 780 /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */ 781 MX53_PAD_PATA_DATA7__GPIO2_7 0x0 782 /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */ 783 MX53_PAD_PATA_DATA12__GPIO2_12 0x0 784 /* DOCK_PRESENT_N */ 785 MX53_PAD_PATA_DATA13__GPIO2_13 0x0 786 /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */ 787 MX53_PAD_PATA_DATA14__GPIO2_14 0x0 788 /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */ 789 MX53_PAD_PATA_DATA15__GPIO2_15 0x0 790 /* RESET_IMX535_ETHERNET_PHY_N */ 791 MX53_PAD_EIM_A22__GPIO2_16 0x0 792 /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */ 793 MX53_PAD_EIM_A21__GPIO2_17 0x0 794 /* RESET_I2C1_BUS_SEGMENT_MUX_N */ 795 MX53_PAD_EIM_A20__GPIO2_18 0x0 796 /* RESET_IMX535_USB_HOST3_PHY_N */ 797 MX53_PAD_EIM_A19__GPIO2_19 0x0 798 /* ESDHC3_EMMC_NAND_RST_N */ 799 MX53_PAD_EIM_A18__GPIO2_20 0x0 800 /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */ 801 MX53_PAD_EIM_A17__GPIO2_21 0x0 802 /* POWER_DOWN_LVDS0_DESERIALIZER_N */ 803 MX53_PAD_EIM_A16__GPIO2_22 0x0 804 /* POWER_DOWN_LVDS1_DESERIALIZER_N */ 805 MX53_PAD_EIM_LBA__GPIO2_27 0x0 806 /* RESET_DP0_TRANSMITTER_N */ 807 MX53_PAD_EIM_EB0__GPIO2_28 0x0 808 /* RESET_DP1_TRANSMITTER_N */ 809 MX53_PAD_EIM_EB1__GPIO2_29 0x0 810 /* ENABLE_SPDIF_AUDIO_TO_DP0 */ 811 MX53_PAD_EIM_DA0__GPIO3_0 0x0 812 /* ENABLE_SPDIF_AUDIO_TO_DP1 */ 813 MX53_PAD_EIM_DA1__GPIO3_1 0x0 814 /* LVDS1_MUX_CTRL */ 815 MX53_PAD_EIM_DA2__GPIO3_2 0x0 816 /* LVDS0_MUX_CTRL */ 817 MX53_PAD_EIM_DA3__GPIO3_3 0x0 818 /* DP1_TRANSMITTER_IRQ */ 819 MX53_PAD_EIM_DA4__GPIO3_4 0x0 820 /* DP0_TRANSMITTER_IRQ */ 821 MX53_PAD_EIM_DA5__GPIO3_5 0x0 822 /* USB_RESET_N */ 823 MX53_PAD_EIM_DA6__GPIO3_6 0x0 824 /* ENABLE_BATTERY_CHARGER */ 825 MX53_PAD_EIM_DA7__GPIO3_7 0x0 826 /* SOFTWARE_CONTROLLED_PWR_CYCLE */ 827 MX53_PAD_EIM_DA8__GPIO3_8 0x0 828 /* SOFTWARE_CONTROLLED_POWERDOWN */ 829 MX53_PAD_EIM_DA9__GPIO3_9 0x0 830 /* DC_PWR_IN_OK */ 831 MX53_PAD_EIM_DA10__GPIO3_10 0x0 832 /* BATT_PRESENT_N */ 833 MX53_PAD_EIM_DA11__GPIO3_11 0xe4 834 /* PMIC_IRQ_N */ 835 MX53_PAD_EIM_DA12__GPIO3_12 0x0 836 /* PMIC_VDD_FAULT_STATUS_N */ 837 MX53_PAD_EIM_DA13__GPIO3_13 0x0 838 /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */ 839 MX53_PAD_EIM_DA14__GPIO3_14 0x0 840 /* NOT USED - AVAILABLE 3.3V GPIO */ 841 MX53_PAD_EIM_DA15__GPIO3_15 0x0 842 /* NOT USED - AVAILABLE 3.3V GPIO */ 843 MX53_PAD_EIM_D22__GPIO3_22 0x0 844 /* NOT USED - AVAILABLE 3.3V GPIO */ 845 MX53_PAD_EIM_D24__GPIO3_24 0x0 846 /* NBP_PUMP_VALVE_PWR_ENABLE */ 847 MX53_PAD_EIM_D25__GPIO3_25 0x0 848 /* NIBP_RESET_N */ 849 MX53_PAD_EIM_D26__GPIO3_26 0x0 850 /* LATCHED_OVERPRESSURE_N */ 851 MX53_PAD_EIM_D27__GPIO3_27 0x0 852 /* NBP_SBWTCLK */ 853 MX53_PAD_EIM_D29__GPIO3_29 0x0 854 /* ENABLE_WIFI_MODULE */ 855 MX53_PAD_GPIO_11__GPIO4_1 0x400 856 /* WIFI_MODULE_IRQ_N */ 857 MX53_PAD_GPIO_12__GPIO4_2 0x400 858 /* ENABLE_BLUETOOTH_MODULE */ 859 MX53_PAD_GPIO_13__GPIO4_3 0x400 860 /* RESET_IMX535_USB_HOST2_PHY_N */ 861 MX53_PAD_GPIO_14__GPIO4_4 0x400 862 /* ONKEY_IS_DEPRESSED */ 863 MX53_PAD_KEY_ROW3__GPIO4_13 0x0 864 /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */ 865 MX53_PAD_EIM_WAIT__GPIO5_0 0x0 866 /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */ 867 MX53_PAD_EIM_A25__GPIO5_2 0x0 868 /* I2C_PCAP_TOUCHSCREEN_IRQ_N */ 869 MX53_PAD_EIM_A24__GPIO5_4 0x0 870 /* NOT USED - AVAILABLE 1.8V GPIO */ 871 MX53_PAD_DISP0_DAT13__GPIO5_7 0x400 872 /* NOT USED - AVAILABLE 1.8V GPIO */ 873 MX53_PAD_DISP0_DAT14__GPIO5_8 0x400 874 /* NOT USED - AVAILABLE 1.8V GPIO */ 875 MX53_PAD_DISP0_DAT15__GPIO5_9 0x400 876 /* HOST_CONTROLLED_RESET_TO_LCD_N */ 877 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0 878 /* HOST_CONTROLLED_RESET_TO_PCAP_N */ 879 MX53_PAD_CSI0_MCLK__GPIO5_19 0x0 880 /* LR_SCAN_CTRL */ 881 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0 882 /* UD_SCAN_CTRL */ 883 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0 884 /* DATA_WIDTH_CTRL */ 885 MX53_PAD_CSI0_DAT10__GPIO5_28 0x0 886 /* BACKLIGHT_ENABLE */ 887 MX53_PAD_CSI0_DAT11__GPIO5_29 0x0 888 /* MED_USB_PORT_1_HOST_SELECT */ 889 MX53_PAD_EIM_A23__GPIO6_6 0x0 890 /* MED_USB_PORT_2_HOST_SELECT */ 891 MX53_PAD_NANDF_CLE__GPIO6_7 0x0 892 /* MED_USB_PORT_3_HOST_SELECT */ 893 MX53_PAD_NANDF_ALE__GPIO6_8 0x0 894 /* MED_USB_PORT_4_HOST_SELECT */ 895 MX53_PAD_NANDF_WP_B__GPIO6_9 0x0 896 /* MED_USB_PORT_5_HOST_SELECT */ 897 MX53_PAD_NANDF_RB0__GPIO6_10 0x0 898 /* MED_USB_PORT_6_HOST_SELECT */ 899 MX53_PAD_NANDF_CS0__GPIO6_11 0x0 900 /* MED_USB_PORT_7_HOST_SELECT */ 901 MX53_PAD_NANDF_WE_B__GPIO6_12 0x0 902 /* MED_USB_PORT_8_HOST_SELECT */ 903 MX53_PAD_NANDF_RE_B__GPIO6_13 0x0 904 /* MED_USB_PORT_TO_IMX_SELECT_0 */ 905 MX53_PAD_NANDF_CS1__GPIO6_14 0x0 906 /* MED_USB_PORT_TO_IMX_SELECT_1 */ 907 MX53_PAD_NANDF_CS2__GPIO6_15 0x0 908 /* MED_USB_PORT_TO_IMX_SELECT_2 */ 909 MX53_PAD_NANDF_CS3__GPIO6_16 0x0 910 /* POWER_AND_BOOT_STATUS_INDICATOR */ 911 MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 912 /* ACTIVATE_ALARM_LIGHT_RED */ 913 MX53_PAD_PATA_DIOR__GPIO7_3 0x0 914 /* ACTIVATE_ALARM_LIGHT_YELLOW */ 915 MX53_PAD_PATA_DA_1__GPIO7_7 0x0 916 /* ACTIVATE_ALARM_LIGHT_CYAN */ 917 MX53_PAD_PATA_DA_2__GPIO7_8 0x0 918 /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ 919 MX53_PAD_GPIO_16__GPIO7_11 0x0 920 /* BATTERY_STATUS_INDICATOR_AMBER */ 921 MX53_PAD_GPIO_17__GPIO7_12 0x0 922 /* AUDIO_ALARMS_SILENCED_INDICATOR */ 923 MX53_PAD_GPIO_18__GPIO7_13 0x0 924 >; 925 }; 926 927 pinctrl_i2c1: i2c1grp { 928 fsl,pins = < 929 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 930 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 931 >; 932 }; 933 934 pinctrl_i2c1_gpio: i2c1gpiogrp { 935 fsl,pins = < 936 MX53_PAD_EIM_D28__GPIO3_28 0x1e4 937 MX53_PAD_EIM_D21__GPIO3_21 0x1e4 938 >; 939 }; 940 941 pinctrl_i2c2: i2c2grp { 942 fsl,pins = < 943 MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4 944 MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4 945 >; 946 }; 947 948 pinctrl_i2c2_gpio: i2c2gpiogrp { 949 fsl,pins = < 950 MX53_PAD_EIM_D16__GPIO3_16 0x1e4 951 MX53_PAD_EIM_EB2__GPIO2_30 0x1e4 952 >; 953 }; 954 955 pinctrl_i2c3: i2c3grp { 956 fsl,pins = < 957 MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4 958 MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4 959 >; 960 }; 961 962 pinctrl_i2c3_gpio: i2c3gpiogrp { 963 fsl,pins = < 964 MX53_PAD_EIM_D18__GPIO3_18 0x1e4 965 MX53_PAD_EIM_D17__GPIO3_17 0x1e4 966 >; 967 }; 968 969 pinctrl_pwm1: pwm1grp { 970 fsl,pins = < 971 MX53_PAD_GPIO_9__PWM1_PWMO 0x5 972 >; 973 }; 974 975 pinctrl_pwm2: pwm2grp { 976 fsl,pins = < 977 MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5 978 >; 979 }; 980 981 pinctrl_uart1: uart1grp { 982 fsl,pins = < 983 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 984 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 985 >; 986 }; 987 988 pinctrl_uart2: uart2grp { 989 fsl,pins = < 990 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 991 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 992 >; 993 }; 994 995 pinctrl_uart3: uart3grp { 996 fsl,pins = < 997 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 998 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 999 MX53_PAD_EIM_D23__UART3_CTS 0x1e4 1000 MX53_PAD_EIM_EB3__UART3_RTS 0x1e4 1001 >; 1002 }; 1003 1004 pinctrl_uart4: uart4grp { 1005 fsl,pins = < 1006 MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 1007 MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 1008 >; 1009 }; 1010 1011 pinctrl_uart5: uart5grp { 1012 fsl,pins = < 1013 MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 1014 MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 1015 >; 1016 }; 1017 1018 pinctrl_usb_otg_vbus: usb-otg-vbusgrp { 1019 fsl,pins = < 1020 /* USB_HS_OTG_VBUS_ENABLE */ 1021 MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4 1022 >; 1023 }; 1024 1025 pinctrl_usbh2: usbh2grp { 1026 fsl,pins = < 1027 /* USB H2 */ 1028 MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180 1029 MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180 1030 MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180 1031 MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180 1032 MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180 1033 MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180 1034 MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180 1035 MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180 1036 MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180 1037 MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180 1038 MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180 1039 MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5 1040 MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180 1041 >; 1042 }; 1043 1044 pinctrl_usbh2_vbus: usbh2-vbusgrp { 1045 fsl,pins = < 1046 /* USB_HS_HOST2_VBUS_ENABLE */ 1047 MX53_PAD_EIM_D31__GPIO3_31 0x0 1048 >; 1049 }; 1050 1051 pinctrl_usbh3_vbus: usbh3-vbusgrp { 1052 fsl,pins = < 1053 /* USB_HS_HOST3_VBUS_ENABLE */ 1054 MX53_PAD_CSI0_DAT9__GPIO5_27 0x0 1055 >; 1056 }; 1057 1058 pinctrl_usbh3: usbh3grp { 1059 fsl,pins = < 1060 /* USB H3 */ 1061 MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180 1062 MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180 1063 MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180 1064 MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180 1065 MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180 1066 MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180 1067 MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180 1068 MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180 1069 MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5 1070 MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180 1071 MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180 1072 MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180 1073 MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180 1074 >; 1075 }; 1076 1077 pinctrl_usb_otg: usbotggrp { 1078 fsl,pins = < 1079 /* USB_OTG_FAULT_N */ 1080 MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 1081 >; 1082 }; 1083}; 1084
