1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Samsung's Exynos4412 based Trats 2 board device tree source 4 * 5 * Copyright (c) 2013 Samsung Electronics Co., Ltd. 6 * http://www.samsung.com 7 * 8 * Device tree source file for Samsung's Trats 2 board which is based on 9 * Samsung's Exynos4412 SoC. 10 */ 11 12/dts-v1/; 13#include "exynos4412.dtsi" 14#include "exynos4412-ppmu-common.dtsi" 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/interrupt-controller/irq.h> 17#include <dt-bindings/clock/maxim,max77686.h> 18#include <dt-bindings/pinctrl/samsung.h> 19 20/ { 21 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; 22 23 aliases { 24 i2c11 = &i2c_max77693; 25 i2c12 = &i2c_max77693_fuel; 26 }; 27 28 chosen { 29 stdout-path = &serial_2; 30 }; 31 32 firmware@204f000 { 33 compatible = "samsung,secure-firmware"; 34 reg = <0x0204F000 0x1000>; 35 }; 36 37 fixed-rate-clocks { 38 xxti { 39 compatible = "samsung,clock-xxti", "fixed-clock"; 40 clock-frequency = <0>; 41 }; 42 43 xusbxti { 44 compatible = "samsung,clock-xusbxti", "fixed-clock"; 45 clock-frequency = <24000000>; 46 }; 47 }; 48 49 cam_io_reg: voltage-regulator-1 { 50 compatible = "regulator-fixed"; 51 regulator-name = "CAM_SENSOR_A"; 52 regulator-min-microvolt = <2800000>; 53 regulator-max-microvolt = <2800000>; 54 enable-active-high; 55 status = "disabled"; 56 }; 57 58 cam_af_reg: voltage-regulator-2 { 59 compatible = "regulator-fixed"; 60 regulator-name = "CAM_AF"; 61 regulator-min-microvolt = <2800000>; 62 regulator-max-microvolt = <2800000>; 63 enable-active-high; 64 status = "disabled"; 65 }; 66 67 vsil12: voltage-regulator-3 { 68 compatible = "regulator-fixed"; 69 regulator-name = "VSIL_1.2V"; 70 regulator-min-microvolt = <1200000>; 71 regulator-max-microvolt = <1200000>; 72 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; 73 enable-active-high; 74 vin-supply = <&buck7_reg>; 75 }; 76 77 vcc33mhl: voltage-regulator-4 { 78 compatible = "regulator-fixed"; 79 regulator-name = "VCC_3.3_MHL"; 80 regulator-min-microvolt = <3300000>; 81 regulator-max-microvolt = <3300000>; 82 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; 83 enable-active-high; 84 }; 85 86 vcc18mhl: voltage-regulator-5 { 87 compatible = "regulator-fixed"; 88 regulator-name = "VCC_1.8_MHL"; 89 regulator-min-microvolt = <1800000>; 90 regulator-max-microvolt = <1800000>; 91 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; 92 enable-active-high; 93 }; 94 95 gpio-keys { 96 compatible = "gpio-keys"; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&gpio_keys>; 99 100 key-down { 101 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; 102 linux,code = <114>; 103 label = "volume down"; 104 debounce-interval = <10>; 105 }; 106 107 key-up { 108 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; 109 linux,code = <115>; 110 label = "volume up"; 111 debounce-interval = <10>; 112 }; 113 114 key-power { 115 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; 116 linux,code = <116>; 117 label = "power"; 118 debounce-interval = <10>; 119 wakeup-source; 120 }; 121 122 key-ok { 123 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; 124 linux,code = <139>; 125 label = "ok"; 126 debounce-interval = <10>; 127 wakeup-source; 128 }; 129 }; 130 131 i2c_max77693: i2c-gpio-1 { 132 compatible = "i2c-gpio"; 133 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; 134 i2c-gpio,delay-us = <2>; 135 #address-cells = <1>; 136 #size-cells = <0>; 137 status = "okay"; 138 139 max77693@66 { 140 compatible = "maxim,max77693"; 141 interrupt-parent = <&gpx1>; 142 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 143 pinctrl-names = "default"; 144 pinctrl-0 = <&max77693_irq>; 145 reg = <0x66>; 146 147 regulators { 148 esafeout1_reg: ESAFEOUT1 { 149 regulator-name = "ESAFEOUT1"; 150 }; 151 esafeout2_reg: ESAFEOUT2 { 152 regulator-name = "ESAFEOUT2"; 153 }; 154 charger_reg: CHARGER { 155 regulator-name = "CHARGER"; 156 regulator-min-microamp = <60000>; 157 regulator-max-microamp = <2580000>; 158 }; 159 }; 160 161 max77693_haptic { 162 compatible = "maxim,max77693-haptic"; 163 haptic-supply = <&ldo26_reg>; 164 pwms = <&pwm 0 38022 0>; 165 }; 166 167 charger { 168 compatible = "maxim,max77693-charger"; 169 170 maxim,constant-microvolt = <4350000>; 171 maxim,min-system-microvolt = <3600000>; 172 maxim,thermal-regulation-celsius = <100>; 173 maxim,battery-overcurrent-microamp = <3500000>; 174 maxim,charge-input-threshold-microvolt = <4300000>; 175 }; 176 }; 177 }; 178 179 i2c_max77693_fuel: i2c-gpio-3 { 180 compatible = "i2c-gpio"; 181 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; 182 i2c-gpio,delay-us = <2>; 183 #address-cells = <1>; 184 #size-cells = <0>; 185 status = "okay"; 186 187 max77693-fuel-gauge@36 { 188 compatible = "maxim,max17047"; 189 interrupt-parent = <&gpx2>; 190 interrupts = <3 IRQ_TYPE_EDGE_FALLING>; 191 pinctrl-names = "default"; 192 pinctrl-0 = <&max77693_fuel_irq>; 193 reg = <0x36>; 194 195 maxim,over-heat-temp = <700>; 196 maxim,over-volt = <4500>; 197 }; 198 }; 199 200 i2c-mhl { 201 compatible = "i2c-gpio"; 202 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; 203 i2c-gpio,delay-us = <100>; 204 #address-cells = <1>; 205 #size-cells = <0>; 206 207 pinctrl-0 = <&i2c_mhl_bus>; 208 pinctrl-names = "default"; 209 status = "okay"; 210 211 sii9234: hdmi-bridge@39 { 212 compatible = "sil,sii9234"; 213 avcc33-supply = <&vcc33mhl>; 214 iovcc18-supply = <&vcc18mhl>; 215 avcc12-supply = <&vsil12>; 216 cvcc12-supply = <&vsil12>; 217 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; 218 interrupt-parent = <&gpf3>; 219 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; 220 reg = <0x39>; 221 222 port { 223 mhl_to_hdmi: endpoint { 224 remote-endpoint = <&hdmi_to_mhl>; 225 }; 226 }; 227 }; 228 }; 229 230 wlan_pwrseq: sdhci3-pwrseq { 231 compatible = "mmc-pwrseq-simple"; 232 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; 233 clocks = <&max77686 MAX77686_CLK_PMIC>; 234 clock-names = "ext_clock"; 235 }; 236 237 sound { 238 compatible = "samsung,trats2-audio"; 239 samsung,i2s-controller = <&i2s0>; 240 samsung,model = "Trats2"; 241 samsung,audio-codec = <&wm1811>; 242 samsung,audio-routing = 243 "SPK", "SPKOUTLN", 244 "SPK", "SPKOUTLP", 245 "SPK", "SPKOUTRN", 246 "SPK", "SPKOUTRP"; 247 }; 248 249 thermistor-ap { 250 compatible = "murata,ncp15wb473"; 251 pullup-uv = <1800000>; /* VCC_1.8V_AP */ 252 pullup-ohm = <100000>; /* 100K */ 253 pulldown-ohm = <100000>; /* 100K */ 254 io-channels = <&adc 1>; /* AP temperature */ 255 }; 256 257 thermistor-battery { 258 compatible = "murata,ncp15wb473"; 259 pullup-uv = <1800000>; /* VCC_1.8V_AP */ 260 pullup-ohm = <100000>; /* 100K */ 261 pulldown-ohm = <100000>; /* 100K */ 262 io-channels = <&adc 2>; /* Battery temperature */ 263 }; 264 265 thermal-zones { 266 cpu_thermal: cpu-thermal { 267 cooling-maps { 268 map0 { 269 /* Corresponds to 800MHz at freq_table */ 270 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, 271 <&cpu2 7 7>, <&cpu3 7 7>; 272 }; 273 map1 { 274 /* Corresponds to 200MHz at freq_table */ 275 cooling-device = <&cpu0 13 13>, 276 <&cpu1 13 13>, 277 <&cpu2 13 13>, 278 <&cpu3 13 13>; 279 }; 280 }; 281 }; 282 }; 283}; 284 285&adc { 286 vdd-supply = <&ldo3_reg>; 287 status = "okay"; 288}; 289 290&bus_dmc { 291 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; 292 vdd-supply = <&buck1_reg>; 293 status = "okay"; 294}; 295 296&bus_acp { 297 devfreq = <&bus_dmc>; 298 status = "okay"; 299}; 300 301&bus_c2c { 302 devfreq = <&bus_dmc>; 303 status = "okay"; 304}; 305 306&bus_leftbus { 307 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; 308 vdd-supply = <&buck3_reg>; 309 status = "okay"; 310}; 311 312&bus_rightbus { 313 devfreq = <&bus_leftbus>; 314 status = "okay"; 315}; 316 317&bus_display { 318 devfreq = <&bus_leftbus>; 319 status = "okay"; 320}; 321 322&bus_fsys { 323 devfreq = <&bus_leftbus>; 324 status = "okay"; 325}; 326 327&bus_peri { 328 devfreq = <&bus_leftbus>; 329 status = "okay"; 330}; 331 332&bus_mfc { 333 devfreq = <&bus_leftbus>; 334 status = "okay"; 335}; 336 337&camera { 338 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; 339 pinctrl-names = "default"; 340 status = "okay"; 341 assigned-clocks = <&clock CLK_MOUT_CAM0>, 342 <&clock CLK_MOUT_CAM1>; 343 assigned-clock-parents = <&clock CLK_XUSBXTI>, 344 <&clock CLK_XUSBXTI>; 345}; 346 347&cpu0 { 348 cpu0-supply = <&buck2_reg>; 349}; 350 351&csis_0 { 352 status = "okay"; 353 vddcore-supply = <&ldo8_reg>; 354 vddio-supply = <&ldo10_reg>; 355 assigned-clocks = <&clock CLK_MOUT_CSIS0>, 356 <&clock CLK_SCLK_CSIS0>; 357 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 358 assigned-clock-rates = <0>, <176000000>; 359 360 /* Camera C (3) MIPI CSI-2 (CSIS0) */ 361 port@3 { 362 reg = <3>; 363 csis0_ep: endpoint { 364 remote-endpoint = <&s5c73m3_ep>; 365 data-lanes = <1 2 3 4>; 366 samsung,csis-hs-settle = <12>; 367 }; 368 }; 369}; 370 371&csis_1 { 372 status = "okay"; 373 vddcore-supply = <&ldo8_reg>; 374 vddio-supply = <&ldo10_reg>; 375 assigned-clocks = <&clock CLK_MOUT_CSIS1>, 376 <&clock CLK_SCLK_CSIS1>; 377 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 378 assigned-clock-rates = <0>, <176000000>; 379 380 /* Camera D (4) MIPI CSI-2 (CSIS1) */ 381 port@4 { 382 reg = <4>; 383 csis1_ep: endpoint { 384 remote-endpoint = <&is_s5k6a3_ep>; 385 data-lanes = <1>; 386 samsung,csis-hs-settle = <18>; 387 samsung,csis-wclk; 388 }; 389 }; 390}; 391 392&dsi_0 { 393 vddcore-supply = <&ldo8_reg>; 394 vddio-supply = <&ldo10_reg>; 395 samsung,burst-clock-frequency = <500000000>; 396 samsung,esc-clock-frequency = <20000000>; 397 samsung,pll-clock-frequency = <24000000>; 398}; 399 400&exynos_usbphy { 401 vbus-supply = <&esafeout1_reg>; 402 status = "okay"; 403}; 404 405&fimc_0 { 406 status = "okay"; 407 assigned-clocks = <&clock CLK_MOUT_FIMC0>, 408 <&clock CLK_SCLK_FIMC0>; 409 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 410 assigned-clock-rates = <0>, <176000000>; 411}; 412 413&fimc_1 { 414 status = "okay"; 415 assigned-clocks = <&clock CLK_MOUT_FIMC1>, 416 <&clock CLK_SCLK_FIMC1>; 417 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 418 assigned-clock-rates = <0>, <176000000>; 419}; 420 421&fimc_2 { 422 status = "okay"; 423 assigned-clocks = <&clock CLK_MOUT_FIMC2>, 424 <&clock CLK_SCLK_FIMC2>; 425 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 426 assigned-clock-rates = <0>, <176000000>; 427}; 428 429&fimc_3 { 430 status = "okay"; 431 assigned-clocks = <&clock CLK_MOUT_FIMC3>, 432 <&clock CLK_SCLK_FIMC3>; 433 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; 434 assigned-clock-rates = <0>, <176000000>; 435}; 436 437&fimc_is { 438 pinctrl-0 = <&fimc_is_uart>; 439 pinctrl-names = "default"; 440 status = "okay"; 441 442 }; 443 444&fimc_lite_0 { 445 status = "okay"; 446}; 447 448&fimc_lite_1 { 449 status = "okay"; 450}; 451 452&fimd { 453 status = "okay"; 454}; 455 456&gpu { 457 mali-supply = <&buck4_reg>; 458 status = "okay"; 459}; 460 461&hdmi { 462 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; 463 pinctrl-names = "default"; 464 pinctrl-0 = <&hdmi_hpd>; 465 vdd-supply = <&ldo3_reg>; 466 vdd_osc-supply = <&ldo4_reg>; 467 vdd_pll-supply = <&ldo3_reg>; 468 ddc = <&i2c_5>; 469 status = "okay"; 470 471 ports { 472 #address-cells = <1>; 473 #size-cells = <0>; 474 475 port@1 { 476 reg = <1>; 477 hdmi_to_mhl: endpoint { 478 remote-endpoint = <&mhl_to_hdmi>; 479 }; 480 }; 481 }; 482}; 483 484&hsotg { 485 vusb_d-supply = <&ldo15_reg>; 486 vusb_a-supply = <&ldo12_reg>; 487 dr_mode = "peripheral"; 488 status = "okay"; 489}; 490 491&i2c_0 { 492 samsung,i2c-sda-delay = <100>; 493 samsung,i2c-slave-addr = <0x10>; 494 samsung,i2c-max-bus-freq = <400000>; 495 pinctrl-0 = <&i2c0_bus>; 496 pinctrl-names = "default"; 497 status = "okay"; 498 499 s5c73m3: s5c73m3@3c { 500 compatible = "samsung,s5c73m3"; 501 reg = <0x3c>; 502 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ 503 vdd-int-supply = <&buck9_reg>; 504 vddio-cis-supply = <&ldo9_reg>; 505 vddio-host-supply = <&ldo18_reg>; 506 vdd-af-supply = <&cam_af_reg>; 507 vdd-reg-supply = <&cam_io_reg>; 508 clock-frequency = <24000000>; 509 /* CAM_A_CLKOUT */ 510 clocks = <&camera 0>; 511 clock-names = "cis_extclk"; 512 status = "disabled"; 513 port { 514 s5c73m3_ep: endpoint { 515 remote-endpoint = <&csis0_ep>; 516 data-lanes = <1 2 3 4>; 517 }; 518 }; 519 }; 520}; 521 522&i2c1_isp { 523 pinctrl-0 = <&fimc_is_i2c1>; 524 pinctrl-names = "default"; 525 526 s5k6a3@10 { 527 compatible = "samsung,s5k6a3"; 528 reg = <0x10>; 529 svdda-supply = <&cam_io_reg>; 530 svddio-supply = <&ldo19_reg>; 531 afvdd-supply = <&ldo19_reg>; 532 clock-frequency = <24000000>; 533 /* CAM_B_CLKOUT */ 534 clocks = <&camera 1>; 535 clock-names = "extclk"; 536 samsung,camclk-out = <1>; 537 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; 538 539 port { 540 is_s5k6a3_ep: endpoint { 541 remote-endpoint = <&csis1_ep>; 542 data-lanes = <1>; 543 }; 544 }; 545 }; 546}; 547 548&i2c_3 { 549 samsung,i2c-sda-delay = <100>; 550 samsung,i2c-slave-addr = <0x10>; 551 samsung,i2c-max-bus-freq = <400000>; 552 pinctrl-0 = <&i2c3_bus>; 553 pinctrl-names = "default"; 554 status = "okay"; 555}; 556 557&i2c_4 { 558 samsung,i2c-sda-delay = <100>; 559 samsung,i2c-slave-addr = <0x10>; 560 samsung,i2c-max-bus-freq = <100000>; 561 pinctrl-0 = <&i2c4_bus>; 562 pinctrl-names = "default"; 563 status = "okay"; 564 565 wm1811: wm1811@1a { 566 compatible = "wlf,wm1811"; 567 reg = <0x1a>; 568 clocks = <&pmu_system_controller 0>; 569 clock-names = "MCLK1"; 570 DCVDD-supply = <&ldo3_reg>; 571 DBVDD1-supply = <&ldo3_reg>; 572 wlf,ldo1ena = <&gpj0 4 0>; 573 }; 574}; 575 576&i2c_5 { 577 status = "okay"; 578}; 579 580&i2c_7 { 581 samsung,i2c-sda-delay = <100>; 582 samsung,i2c-slave-addr = <0x10>; 583 samsung,i2c-max-bus-freq = <100000>; 584 pinctrl-0 = <&i2c7_bus>; 585 pinctrl-names = "default"; 586 status = "okay"; 587 588 max77686: max77686_pmic@9 { 589 compatible = "maxim,max77686"; 590 interrupt-parent = <&gpx0>; 591 interrupts = <7 IRQ_TYPE_NONE>; 592 pinctrl-0 = <&max77686_irq>; 593 pinctrl-names = "default"; 594 reg = <0x09>; 595 #clock-cells = <1>; 596 597 voltage-regulators { 598 ldo1_reg: LDO1 { 599 regulator-name = "VALIVE_1.0V_AP"; 600 regulator-min-microvolt = <1000000>; 601 regulator-max-microvolt = <1000000>; 602 regulator-always-on; 603 }; 604 605 ldo2_reg: LDO2 { 606 regulator-name = "VM1M2_1.2V_AP"; 607 regulator-min-microvolt = <1200000>; 608 regulator-max-microvolt = <1200000>; 609 regulator-always-on; 610 regulator-state-mem { 611 regulator-on-in-suspend; 612 }; 613 }; 614 615 ldo3_reg: LDO3 { 616 regulator-name = "VCC_1.8V_AP"; 617 regulator-min-microvolt = <1800000>; 618 regulator-max-microvolt = <1800000>; 619 regulator-always-on; 620 }; 621 622 ldo4_reg: LDO4 { 623 regulator-name = "VCC_2.8V_AP"; 624 regulator-min-microvolt = <2800000>; 625 regulator-max-microvolt = <2800000>; 626 regulator-always-on; 627 }; 628 629 ldo5_reg: LDO5 { 630 regulator-name = "VCC_1.8V_IO"; 631 regulator-min-microvolt = <1800000>; 632 regulator-max-microvolt = <1800000>; 633 regulator-always-on; 634 }; 635 636 ldo6_reg: LDO6 { 637 regulator-name = "VMPLL_1.0V_AP"; 638 regulator-min-microvolt = <1000000>; 639 regulator-max-microvolt = <1000000>; 640 regulator-always-on; 641 regulator-state-mem { 642 regulator-on-in-suspend; 643 }; 644 }; 645 646 ldo7_reg: LDO7 { 647 regulator-name = "VPLL_1.0V_AP"; 648 regulator-min-microvolt = <1000000>; 649 regulator-max-microvolt = <1000000>; 650 regulator-always-on; 651 regulator-state-mem { 652 regulator-on-in-suspend; 653 }; 654 }; 655 656 ldo8_reg: LDO8 { 657 regulator-name = "VMIPI_1.0V"; 658 regulator-min-microvolt = <1000000>; 659 regulator-max-microvolt = <1000000>; 660 regulator-state-mem { 661 regulator-off-in-suspend; 662 }; 663 }; 664 665 ldo9_reg: LDO9 { 666 regulator-name = "CAM_ISP_MIPI_1.2V"; 667 regulator-min-microvolt = <1200000>; 668 regulator-max-microvolt = <1200000>; 669 }; 670 671 ldo10_reg: LDO10 { 672 regulator-name = "VMIPI_1.8V"; 673 regulator-min-microvolt = <1800000>; 674 regulator-max-microvolt = <1800000>; 675 regulator-state-mem { 676 regulator-off-in-suspend; 677 }; 678 }; 679 680 ldo11_reg: LDO11 { 681 regulator-name = "VABB1_1.95V"; 682 regulator-min-microvolt = <1950000>; 683 regulator-max-microvolt = <1950000>; 684 regulator-always-on; 685 regulator-state-mem { 686 regulator-off-in-suspend; 687 }; 688 }; 689 690 ldo12_reg: LDO12 { 691 regulator-name = "VUOTG_3.0V"; 692 regulator-min-microvolt = <3000000>; 693 regulator-max-microvolt = <3000000>; 694 regulator-state-mem { 695 regulator-off-in-suspend; 696 }; 697 }; 698 699 ldo13_reg: LDO13 { 700 regulator-name = "NFC_AVDD_1.8V"; 701 regulator-min-microvolt = <1800000>; 702 regulator-max-microvolt = <1800000>; 703 }; 704 705 ldo14_reg: LDO14 { 706 regulator-name = "VABB2_1.95V"; 707 regulator-min-microvolt = <1950000>; 708 regulator-max-microvolt = <1950000>; 709 regulator-always-on; 710 regulator-state-mem { 711 regulator-off-in-suspend; 712 }; 713 }; 714 715 ldo15_reg: LDO15 { 716 regulator-name = "VHSIC_1.0V"; 717 regulator-min-microvolt = <1000000>; 718 regulator-max-microvolt = <1000000>; 719 regulator-state-mem { 720 regulator-on-in-suspend; 721 }; 722 }; 723 724 ldo16_reg: LDO16 { 725 regulator-name = "VHSIC_1.8V"; 726 regulator-min-microvolt = <1800000>; 727 regulator-max-microvolt = <1800000>; 728 regulator-state-mem { 729 regulator-on-in-suspend; 730 }; 731 }; 732 733 ldo17_reg: LDO17 { 734 regulator-name = "CAM_SENSOR_CORE_1.2V"; 735 regulator-min-microvolt = <1200000>; 736 regulator-max-microvolt = <1200000>; 737 }; 738 739 ldo18_reg: LDO18 { 740 regulator-name = "CAM_ISP_SEN_IO_1.8V"; 741 regulator-min-microvolt = <1800000>; 742 regulator-max-microvolt = <1800000>; 743 }; 744 745 ldo19_reg: LDO19 { 746 regulator-name = "VT_CAM_1.8V"; 747 regulator-min-microvolt = <1800000>; 748 regulator-max-microvolt = <1800000>; 749 }; 750 751 ldo20_reg: LDO20 { 752 regulator-name = "VDDQ_PRE_1.8V"; 753 regulator-min-microvolt = <1800000>; 754 regulator-max-microvolt = <1800000>; 755 }; 756 757 ldo21_reg: LDO21 { 758 regulator-name = "VTF_2.8V"; 759 regulator-min-microvolt = <2800000>; 760 regulator-max-microvolt = <2800000>; 761 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; 762 }; 763 764 ldo22_reg: LDO22 { 765 regulator-name = "VMEM_VDD_2.8V"; 766 regulator-min-microvolt = <2800000>; 767 regulator-max-microvolt = <2800000>; 768 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 769 }; 770 771 ldo23_reg: LDO23 { 772 regulator-name = "TSP_AVDD_3.3V"; 773 regulator-min-microvolt = <3300000>; 774 regulator-max-microvolt = <3300000>; 775 }; 776 777 ldo24_reg: LDO24 { 778 regulator-name = "TSP_VDD_1.8V"; 779 regulator-min-microvolt = <1800000>; 780 regulator-max-microvolt = <1800000>; 781 }; 782 783 ldo25_reg: LDO25 { 784 regulator-name = "LDO25"; 785 }; 786 787 ldo26_reg: LDO26 { 788 regulator-name = "MOTOR_VCC_3.0V"; 789 regulator-min-microvolt = <3000000>; 790 regulator-max-microvolt = <3000000>; 791 }; 792 793 buck1_reg: BUCK1 { 794 regulator-name = "vdd_mif"; 795 regulator-min-microvolt = <850000>; 796 regulator-max-microvolt = <1100000>; 797 regulator-always-on; 798 regulator-boot-on; 799 regulator-state-mem { 800 regulator-off-in-suspend; 801 }; 802 }; 803 804 buck2_reg: BUCK2 { 805 regulator-name = "vdd_arm"; 806 regulator-min-microvolt = <850000>; 807 regulator-max-microvolt = <1500000>; 808 regulator-always-on; 809 regulator-boot-on; 810 regulator-state-mem { 811 regulator-on-in-suspend; 812 }; 813 }; 814 815 buck3_reg: BUCK3 { 816 regulator-name = "vdd_int"; 817 regulator-min-microvolt = <850000>; 818 regulator-max-microvolt = <1150000>; 819 regulator-always-on; 820 regulator-boot-on; 821 regulator-state-mem { 822 regulator-off-in-suspend; 823 }; 824 }; 825 826 buck4_reg: BUCK4 { 827 regulator-name = "vdd_g3d"; 828 regulator-min-microvolt = <850000>; 829 regulator-max-microvolt = <1150000>; 830 regulator-boot-on; 831 regulator-state-mem { 832 regulator-off-in-suspend; 833 }; 834 }; 835 836 buck5_reg: BUCK5 { 837 regulator-name = "VMEM_1.2V_AP"; 838 regulator-min-microvolt = <1200000>; 839 regulator-max-microvolt = <1200000>; 840 regulator-always-on; 841 }; 842 843 buck6_reg: BUCK6 { 844 regulator-name = "VCC_SUB_1.35V"; 845 regulator-min-microvolt = <1350000>; 846 regulator-max-microvolt = <1350000>; 847 regulator-always-on; 848 }; 849 850 buck7_reg: BUCK7 { 851 regulator-name = "VCC_SUB_2.0V"; 852 regulator-min-microvolt = <2000000>; 853 regulator-max-microvolt = <2000000>; 854 regulator-always-on; 855 }; 856 857 buck8_reg: BUCK8 { 858 regulator-name = "VMEM_VDDF_3.0V"; 859 regulator-min-microvolt = <2850000>; 860 regulator-max-microvolt = <2850000>; 861 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; 862 }; 863 864 buck9_reg: BUCK9 { 865 regulator-name = "CAM_ISP_CORE_1.2V"; 866 regulator-min-microvolt = <1000000>; 867 regulator-max-microvolt = <1200000>; 868 }; 869 }; 870 }; 871}; 872 873&i2c_8 { 874 status = "okay"; 875}; 876 877&i2s0 { 878 pinctrl-0 = <&i2s0_bus>; 879 pinctrl-names = "default"; 880 status = "okay"; 881}; 882 883&mixer { 884 status = "okay"; 885}; 886 887&mshc_0 { 888 broken-cd; 889 non-removable; 890 card-detect-delay = <200>; 891 vmmc-supply = <&ldo22_reg>; 892 clock-frequency = <400000000>; 893 samsung,dw-mshc-ciu-div = <0>; 894 samsung,dw-mshc-sdr-timing = <2 3>; 895 samsung,dw-mshc-ddr-timing = <1 2>; 896 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; 897 pinctrl-names = "default"; 898 status = "okay"; 899 bus-width = <8>; 900 cap-mmc-highspeed; 901}; 902 903&pmu_system_controller { 904 assigned-clocks = <&pmu_system_controller 0>; 905 assigned-clock-parents = <&clock CLK_XUSBXTI>; 906}; 907 908&pinctrl_0 { 909 pinctrl-names = "default"; 910 pinctrl-0 = <&sleep0>; 911 912 mhl_int: mhl-int { 913 samsung,pins = "gpf3-5"; 914 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 915 }; 916 917 i2c_mhl_bus: i2c-mhl-bus { 918 samsung,pins = "gpf0-4", "gpf0-6"; 919 samsung,pin-function = <EXYNOS_PIN_FUNC_2>; 920 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; 921 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; 922 }; 923 924 sleep0: sleep-states { 925 PIN_SLP(gpa0-0, INPUT, NONE); 926 PIN_SLP(gpa0-1, OUT0, NONE); 927 PIN_SLP(gpa0-2, INPUT, NONE); 928 PIN_SLP(gpa0-3, INPUT, UP); 929 PIN_SLP(gpa0-4, INPUT, NONE); 930 PIN_SLP(gpa0-5, INPUT, DOWN); 931 PIN_SLP(gpa0-6, INPUT, DOWN); 932 PIN_SLP(gpa0-7, INPUT, UP); 933 934 PIN_SLP(gpa1-0, INPUT, DOWN); 935 PIN_SLP(gpa1-1, INPUT, DOWN); 936 PIN_SLP(gpa1-2, INPUT, DOWN); 937 PIN_SLP(gpa1-3, INPUT, DOWN); 938 PIN_SLP(gpa1-4, INPUT, DOWN); 939 PIN_SLP(gpa1-5, INPUT, DOWN); 940 941 PIN_SLP(gpb-0, INPUT, NONE); 942 PIN_SLP(gpb-1, INPUT, NONE); 943 PIN_SLP(gpb-2, INPUT, NONE); 944 PIN_SLP(gpb-3, INPUT, NONE); 945 PIN_SLP(gpb-4, INPUT, DOWN); 946 PIN_SLP(gpb-5, INPUT, UP); 947 PIN_SLP(gpb-6, INPUT, DOWN); 948 PIN_SLP(gpb-7, INPUT, DOWN); 949 950 PIN_SLP(gpc0-0, INPUT, DOWN); 951 PIN_SLP(gpc0-1, INPUT, DOWN); 952 PIN_SLP(gpc0-2, INPUT, DOWN); 953 PIN_SLP(gpc0-3, INPUT, DOWN); 954 PIN_SLP(gpc0-4, INPUT, DOWN); 955 956 PIN_SLP(gpc1-0, INPUT, NONE); 957 PIN_SLP(gpc1-1, PREV, NONE); 958 PIN_SLP(gpc1-2, INPUT, NONE); 959 PIN_SLP(gpc1-3, INPUT, NONE); 960 PIN_SLP(gpc1-4, INPUT, NONE); 961 962 PIN_SLP(gpd0-0, INPUT, DOWN); 963 PIN_SLP(gpd0-1, INPUT, DOWN); 964 PIN_SLP(gpd0-2, INPUT, NONE); 965 PIN_SLP(gpd0-3, INPUT, NONE); 966 967 PIN_SLP(gpd1-0, INPUT, DOWN); 968 PIN_SLP(gpd1-1, INPUT, DOWN); 969 PIN_SLP(gpd1-2, INPUT, NONE); 970 PIN_SLP(gpd1-3, INPUT, NONE); 971 972 PIN_SLP(gpf0-0, INPUT, NONE); 973 PIN_SLP(gpf0-1, INPUT, NONE); 974 PIN_SLP(gpf0-2, INPUT, DOWN); 975 PIN_SLP(gpf0-3, INPUT, DOWN); 976 PIN_SLP(gpf0-4, INPUT, NONE); 977 PIN_SLP(gpf0-5, INPUT, DOWN); 978 PIN_SLP(gpf0-6, INPUT, NONE); 979 PIN_SLP(gpf0-7, INPUT, DOWN); 980 981 PIN_SLP(gpf1-0, INPUT, DOWN); 982 PIN_SLP(gpf1-1, INPUT, DOWN); 983 PIN_SLP(gpf1-2, INPUT, DOWN); 984 PIN_SLP(gpf1-3, INPUT, DOWN); 985 PIN_SLP(gpf1-4, INPUT, NONE); 986 PIN_SLP(gpf1-5, INPUT, NONE); 987 PIN_SLP(gpf1-6, INPUT, DOWN); 988 PIN_SLP(gpf1-7, PREV, NONE); 989 990 PIN_SLP(gpf2-0, PREV, NONE); 991 PIN_SLP(gpf2-1, INPUT, DOWN); 992 PIN_SLP(gpf2-2, INPUT, DOWN); 993 PIN_SLP(gpf2-3, INPUT, DOWN); 994 PIN_SLP(gpf2-4, INPUT, DOWN); 995 PIN_SLP(gpf2-5, INPUT, DOWN); 996 PIN_SLP(gpf2-6, INPUT, NONE); 997 PIN_SLP(gpf2-7, INPUT, NONE); 998 999 PIN_SLP(gpf3-0, INPUT, NONE); 1000 PIN_SLP(gpf3-1, PREV, NONE); 1001 PIN_SLP(gpf3-2, PREV, NONE); 1002 PIN_SLP(gpf3-3, PREV, NONE); 1003 PIN_SLP(gpf3-4, OUT1, NONE); 1004 PIN_SLP(gpf3-5, INPUT, DOWN); 1005 1006 PIN_SLP(gpj0-0, PREV, NONE); 1007 PIN_SLP(gpj0-1, PREV, NONE); 1008 PIN_SLP(gpj0-2, PREV, NONE); 1009 PIN_SLP(gpj0-3, INPUT, DOWN); 1010 PIN_SLP(gpj0-4, PREV, NONE); 1011 PIN_SLP(gpj0-5, PREV, NONE); 1012 PIN_SLP(gpj0-6, INPUT, DOWN); 1013 PIN_SLP(gpj0-7, INPUT, DOWN); 1014 1015 PIN_SLP(gpj1-0, INPUT, DOWN); 1016 PIN_SLP(gpj1-1, PREV, NONE); 1017 PIN_SLP(gpj1-2, PREV, NONE); 1018 PIN_SLP(gpj1-3, INPUT, DOWN); 1019 PIN_SLP(gpj1-4, INPUT, DOWN); 1020 }; 1021}; 1022 1023&pinctrl_1 { 1024 pinctrl-names = "default"; 1025 pinctrl-0 = <&sleep1>; 1026 1027 gpio_keys: gpio-keys { 1028 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3"; 1029 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1030 }; 1031 1032 max77686_irq: max77686-irq { 1033 samsung,pins = "gpx0-7"; 1034 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1035 }; 1036 1037 max77693_irq: max77693-irq { 1038 samsung,pins = "gpx1-5"; 1039 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1040 }; 1041 1042 max77693_fuel_irq: max77693-fuel-irq { 1043 samsung,pins = "gpx2-3"; 1044 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1045 }; 1046 1047 sdhci2_cd: sdhci2-cd-irq { 1048 samsung,pins = "gpx3-4"; 1049 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; 1050 }; 1051 1052 hdmi_hpd: hdmi-hpd { 1053 samsung,pins = "gpx3-7"; 1054 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; 1055 }; 1056 1057 sleep1: sleep-states { 1058 PIN_SLP(gpk0-0, PREV, NONE); 1059 PIN_SLP(gpk0-1, PREV, NONE); 1060 PIN_SLP(gpk0-2, OUT0, NONE); 1061 PIN_SLP(gpk0-3, PREV, NONE); 1062 PIN_SLP(gpk0-4, PREV, NONE); 1063 PIN_SLP(gpk0-5, PREV, NONE); 1064 PIN_SLP(gpk0-6, PREV, NONE); 1065 1066 PIN_SLP(gpk1-0, INPUT, DOWN); 1067 PIN_SLP(gpk1-1, INPUT, DOWN); 1068 PIN_SLP(gpk1-2, INPUT, DOWN); 1069 PIN_SLP(gpk1-3, PREV, NONE); 1070 PIN_SLP(gpk1-4, PREV, NONE); 1071 PIN_SLP(gpk1-5, PREV, NONE); 1072 PIN_SLP(gpk1-6, PREV, NONE); 1073 1074 PIN_SLP(gpk2-0, INPUT, DOWN); 1075 PIN_SLP(gpk2-1, INPUT, DOWN); 1076 PIN_SLP(gpk2-2, INPUT, DOWN); 1077 PIN_SLP(gpk2-3, INPUT, DOWN); 1078 PIN_SLP(gpk2-4, INPUT, DOWN); 1079 PIN_SLP(gpk2-5, INPUT, DOWN); 1080 PIN_SLP(gpk2-6, INPUT, DOWN); 1081 1082 PIN_SLP(gpk3-0, OUT0, NONE); 1083 PIN_SLP(gpk3-1, INPUT, NONE); 1084 PIN_SLP(gpk3-2, INPUT, DOWN); 1085 PIN_SLP(gpk3-3, INPUT, NONE); 1086 PIN_SLP(gpk3-4, INPUT, NONE); 1087 PIN_SLP(gpk3-5, INPUT, NONE); 1088 PIN_SLP(gpk3-6, INPUT, NONE); 1089 1090 PIN_SLP(gpl0-0, INPUT, DOWN); 1091 PIN_SLP(gpl0-1, INPUT, DOWN); 1092 PIN_SLP(gpl0-2, INPUT, DOWN); 1093 PIN_SLP(gpl0-3, INPUT, DOWN); 1094 PIN_SLP(gpl0-4, PREV, NONE); 1095 PIN_SLP(gpl0-6, PREV, NONE); 1096 1097 PIN_SLP(gpl1-0, INPUT, DOWN); 1098 PIN_SLP(gpl1-1, INPUT, DOWN); 1099 PIN_SLP(gpl2-0, INPUT, DOWN); 1100 PIN_SLP(gpl2-1, INPUT, DOWN); 1101 PIN_SLP(gpl2-2, INPUT, DOWN); 1102 PIN_SLP(gpl2-3, INPUT, DOWN); 1103 PIN_SLP(gpl2-4, INPUT, DOWN); 1104 PIN_SLP(gpl2-5, INPUT, DOWN); 1105 PIN_SLP(gpl2-6, PREV, NONE); 1106 PIN_SLP(gpl2-7, INPUT, DOWN); 1107 1108 PIN_SLP(gpm0-0, INPUT, DOWN); 1109 PIN_SLP(gpm0-1, INPUT, DOWN); 1110 PIN_SLP(gpm0-2, INPUT, DOWN); 1111 PIN_SLP(gpm0-3, INPUT, DOWN); 1112 PIN_SLP(gpm0-4, INPUT, DOWN); 1113 PIN_SLP(gpm0-5, INPUT, DOWN); 1114 PIN_SLP(gpm0-6, INPUT, DOWN); 1115 PIN_SLP(gpm0-7, INPUT, DOWN); 1116 1117 PIN_SLP(gpm1-0, INPUT, DOWN); 1118 PIN_SLP(gpm1-1, INPUT, DOWN); 1119 PIN_SLP(gpm1-2, INPUT, NONE); 1120 PIN_SLP(gpm1-3, INPUT, NONE); 1121 PIN_SLP(gpm1-4, INPUT, NONE); 1122 PIN_SLP(gpm1-5, INPUT, NONE); 1123 PIN_SLP(gpm1-6, INPUT, DOWN); 1124 1125 PIN_SLP(gpm2-0, INPUT, NONE); 1126 PIN_SLP(gpm2-1, INPUT, NONE); 1127 PIN_SLP(gpm2-2, INPUT, DOWN); 1128 PIN_SLP(gpm2-3, INPUT, DOWN); 1129 PIN_SLP(gpm2-4, INPUT, DOWN); 1130 1131 PIN_SLP(gpm3-0, PREV, NONE); 1132 PIN_SLP(gpm3-1, PREV, NONE); 1133 PIN_SLP(gpm3-2, PREV, NONE); 1134 PIN_SLP(gpm3-3, OUT1, NONE); 1135 PIN_SLP(gpm3-4, INPUT, DOWN); 1136 PIN_SLP(gpm3-5, INPUT, DOWN); 1137 PIN_SLP(gpm3-6, INPUT, DOWN); 1138 PIN_SLP(gpm3-7, INPUT, DOWN); 1139 1140 PIN_SLP(gpm4-0, INPUT, DOWN); 1141 PIN_SLP(gpm4-1, INPUT, DOWN); 1142 PIN_SLP(gpm4-2, INPUT, DOWN); 1143 PIN_SLP(gpm4-3, INPUT, DOWN); 1144 PIN_SLP(gpm4-4, INPUT, DOWN); 1145 PIN_SLP(gpm4-5, INPUT, DOWN); 1146 PIN_SLP(gpm4-6, INPUT, DOWN); 1147 PIN_SLP(gpm4-7, INPUT, DOWN); 1148 1149 PIN_SLP(gpy0-0, INPUT, DOWN); 1150 PIN_SLP(gpy0-1, INPUT, DOWN); 1151 PIN_SLP(gpy0-2, INPUT, DOWN); 1152 PIN_SLP(gpy0-3, INPUT, DOWN); 1153 PIN_SLP(gpy0-4, INPUT, DOWN); 1154 PIN_SLP(gpy0-5, INPUT, DOWN); 1155 1156 PIN_SLP(gpy1-0, INPUT, DOWN); 1157 PIN_SLP(gpy1-1, INPUT, DOWN); 1158 PIN_SLP(gpy1-2, INPUT, DOWN); 1159 PIN_SLP(gpy1-3, INPUT, DOWN); 1160 1161 PIN_SLP(gpy2-0, PREV, NONE); 1162 PIN_SLP(gpy2-1, INPUT, DOWN); 1163 PIN_SLP(gpy2-2, INPUT, NONE); 1164 PIN_SLP(gpy2-3, INPUT, NONE); 1165 PIN_SLP(gpy2-4, INPUT, NONE); 1166 PIN_SLP(gpy2-5, INPUT, NONE); 1167 1168 PIN_SLP(gpy3-0, INPUT, DOWN); 1169 PIN_SLP(gpy3-1, INPUT, DOWN); 1170 PIN_SLP(gpy3-2, INPUT, DOWN); 1171 PIN_SLP(gpy3-3, INPUT, DOWN); 1172 PIN_SLP(gpy3-4, INPUT, DOWN); 1173 PIN_SLP(gpy3-5, INPUT, DOWN); 1174 PIN_SLP(gpy3-6, INPUT, DOWN); 1175 PIN_SLP(gpy3-7, INPUT, DOWN); 1176 1177 PIN_SLP(gpy4-0, INPUT, DOWN); 1178 PIN_SLP(gpy4-1, INPUT, DOWN); 1179 PIN_SLP(gpy4-2, INPUT, DOWN); 1180 PIN_SLP(gpy4-3, INPUT, DOWN); 1181 PIN_SLP(gpy4-4, INPUT, DOWN); 1182 PIN_SLP(gpy4-5, INPUT, DOWN); 1183 PIN_SLP(gpy4-6, INPUT, DOWN); 1184 PIN_SLP(gpy4-7, INPUT, DOWN); 1185 1186 PIN_SLP(gpy5-0, INPUT, DOWN); 1187 PIN_SLP(gpy5-1, INPUT, DOWN); 1188 PIN_SLP(gpy5-2, INPUT, DOWN); 1189 PIN_SLP(gpy5-3, INPUT, DOWN); 1190 PIN_SLP(gpy5-4, INPUT, DOWN); 1191 PIN_SLP(gpy5-5, INPUT, DOWN); 1192 PIN_SLP(gpy5-6, INPUT, DOWN); 1193 PIN_SLP(gpy5-7, INPUT, DOWN); 1194 1195 PIN_SLP(gpy6-0, INPUT, DOWN); 1196 PIN_SLP(gpy6-1, INPUT, DOWN); 1197 PIN_SLP(gpy6-2, INPUT, DOWN); 1198 PIN_SLP(gpy6-3, INPUT, DOWN); 1199 PIN_SLP(gpy6-4, INPUT, DOWN); 1200 PIN_SLP(gpy6-5, INPUT, DOWN); 1201 PIN_SLP(gpy6-6, INPUT, DOWN); 1202 PIN_SLP(gpy6-7, INPUT, DOWN); 1203 }; 1204}; 1205 1206&pinctrl_2 { 1207 pinctrl-names = "default"; 1208 pinctrl-0 = <&sleep2>; 1209 1210 sleep2: sleep-states { 1211 PIN_SLP(gpz-0, INPUT, DOWN); 1212 PIN_SLP(gpz-1, INPUT, DOWN); 1213 PIN_SLP(gpz-2, INPUT, DOWN); 1214 PIN_SLP(gpz-3, INPUT, DOWN); 1215 PIN_SLP(gpz-4, INPUT, DOWN); 1216 PIN_SLP(gpz-5, INPUT, DOWN); 1217 PIN_SLP(gpz-6, INPUT, DOWN); 1218 }; 1219}; 1220 1221&pinctrl_3 { 1222 pinctrl-names = "default"; 1223 pinctrl-0 = <&sleep3>; 1224 1225 sleep3: sleep-states { 1226 PIN_SLP(gpv0-0, INPUT, DOWN); 1227 PIN_SLP(gpv0-1, INPUT, DOWN); 1228 PIN_SLP(gpv0-2, INPUT, DOWN); 1229 PIN_SLP(gpv0-3, INPUT, DOWN); 1230 PIN_SLP(gpv0-4, INPUT, DOWN); 1231 PIN_SLP(gpv0-5, INPUT, DOWN); 1232 PIN_SLP(gpv0-6, INPUT, DOWN); 1233 PIN_SLP(gpv0-7, INPUT, DOWN); 1234 1235 PIN_SLP(gpv1-0, INPUT, DOWN); 1236 PIN_SLP(gpv1-1, INPUT, DOWN); 1237 PIN_SLP(gpv1-2, INPUT, DOWN); 1238 PIN_SLP(gpv1-3, INPUT, DOWN); 1239 PIN_SLP(gpv1-4, INPUT, DOWN); 1240 PIN_SLP(gpv1-5, INPUT, DOWN); 1241 PIN_SLP(gpv1-6, INPUT, DOWN); 1242 PIN_SLP(gpv1-7, INPUT, DOWN); 1243 1244 PIN_SLP(gpv2-0, INPUT, DOWN); 1245 PIN_SLP(gpv2-1, INPUT, DOWN); 1246 PIN_SLP(gpv2-2, INPUT, DOWN); 1247 PIN_SLP(gpv2-3, INPUT, DOWN); 1248 PIN_SLP(gpv2-4, INPUT, DOWN); 1249 PIN_SLP(gpv2-5, INPUT, DOWN); 1250 PIN_SLP(gpv2-6, INPUT, DOWN); 1251 PIN_SLP(gpv2-7, INPUT, DOWN); 1252 1253 PIN_SLP(gpv3-0, INPUT, DOWN); 1254 PIN_SLP(gpv3-1, INPUT, DOWN); 1255 PIN_SLP(gpv3-2, INPUT, DOWN); 1256 PIN_SLP(gpv3-3, INPUT, DOWN); 1257 PIN_SLP(gpv3-4, INPUT, DOWN); 1258 PIN_SLP(gpv3-5, INPUT, DOWN); 1259 PIN_SLP(gpv3-6, INPUT, DOWN); 1260 PIN_SLP(gpv3-7, INPUT, DOWN); 1261 1262 PIN_SLP(gpv4-0, INPUT, DOWN); 1263 }; 1264}; 1265 1266&pwm { 1267 pinctrl-0 = <&pwm0_out>; 1268 pinctrl-names = "default"; 1269 samsung,pwm-outputs = <0>; 1270 status = "okay"; 1271}; 1272 1273&rtc { 1274 status = "okay"; 1275 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; 1276 clock-names = "rtc", "rtc_src"; 1277}; 1278 1279&sdhci_2 { 1280 bus-width = <4>; 1281 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; 1282 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; 1283 pinctrl-names = "default"; 1284 vmmc-supply = <&ldo21_reg>; 1285 status = "okay"; 1286}; 1287 1288&sdhci_3 { 1289 #address-cells = <1>; 1290 #size-cells = <0>; 1291 non-removable; 1292 bus-width = <4>; 1293 1294 mmc-pwrseq = <&wlan_pwrseq>; 1295 pinctrl-names = "default"; 1296 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; 1297 status = "okay"; 1298 1299 brcmf: wifi@1 { 1300 reg = <1>; 1301 compatible = "brcm,bcm4329-fmac"; 1302 interrupt-parent = <&gpx2>; 1303 interrupts = <5 IRQ_TYPE_NONE>; 1304 interrupt-names = "host-wake"; 1305 }; 1306}; 1307 1308&serial_0 { 1309 status = "okay"; 1310}; 1311 1312&serial_1 { 1313 status = "okay"; 1314}; 1315 1316&serial_2 { 1317 status = "okay"; 1318}; 1319 1320&serial_3 { 1321 status = "okay"; 1322}; 1323 1324&spi_1 { 1325 pinctrl-names = "default"; 1326 pinctrl-0 = <&spi1_bus>; 1327 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; 1328 status = "okay"; 1329 1330 s5c73m3_spi: s5c73m3@0 { 1331 compatible = "samsung,s5c73m3"; 1332 spi-max-frequency = <50000000>; 1333 reg = <0>; 1334 controller-data { 1335 samsung,spi-feedback-delay = <2>; 1336 }; 1337 }; 1338}; 1339 1340&tmu { 1341 vtmu-supply = <&ldo10_reg>; 1342 status = "okay"; 1343}; 1344
