1/*
2 *  BSD LICENSE
3 *
4 *  Copyright(c) 2016 Broadcom.  All rights reserved.
5 *
6 *  Redistribution and use in source and binary forms, with or without
7 *  modification, are permitted provided that the following conditions
8 *  are met:
9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom Corporation nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39	model = "NorthStar Plus SVK (BCM958525ER)";
40	compatible = "brcm,bcm58525", "brcm,nsp";
41
42	chosen {
43		stdout-path = "serial0:115200n8";
44	};
45
46	memory@60000000 {
47		device_type = "memory";
48		reg = <0x60000000 0x80000000>;
49	};
50
51	gpio-restart {
52		compatible = "gpio-restart";
53		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54		open-source;
55		priority = <200>;
56	};
57};
58
59/* USB 3 support needed to be complete */
60
61&amac0 {
62	status = "okay";
63};
64
65&amac1 {
66	status = "okay";
67};
68
69&ehci0 {
70	status = "okay";
71};
72
73&nand {
74	nandcs@0 {
75		compatible = "brcm,nandcs";
76		reg = <0>;
77		nand-on-flash-bbt;
78
79		#address-cells = <1>;
80		#size-cells = <1>;
81
82		nand-ecc-strength = <24>;
83		nand-ecc-step-size = <1024>;
84
85		brcm,nand-oob-sector-size = <27>;
86
87		partition@0 {
88			label = "nboot";
89			reg = <0x00000000 0x00200000>;
90			read-only;
91		};
92		partition@200000 {
93			label = "nenv";
94			reg = <0x00200000 0x00400000>;
95		};
96		partition@600000 {
97			label = "nsystem";
98			reg = <0x00600000 0x00a00000>;
99		};
100		partition@1000000 {
101			label = "nrootfs";
102			reg = <0x01000000 0x03000000>;
103		};
104		partition@4000000 {
105			label = "ncustfs";
106			reg = <0x04000000 0x3c000000>;
107		};
108	};
109};
110
111&ohci0 {
112	status = "okay";
113};
114
115&pcie0 {
116	status = "okay";
117};
118
119&pcie1 {
120	status = "okay";
121};
122
123&pinctrl {
124	pinctrl-names = "default";
125	pinctrl-0 = <&nand_sel>;
126	nand_sel: nand_sel {
127		function = "nand";
128		groups = "nand_grp";
129	};
130};
131
132&qspi {
133	bspi-sel = <0>;
134	flash: m25p80@0 {
135		#address-cells = <1>;
136		#size-cells = <1>;
137		compatible = "m25p80";
138		reg = <0x0>;
139		spi-max-frequency = <12500000>;
140		m25p,fast-read;
141		spi-cpol;
142		spi-cpha;
143
144		partition@0 {
145			label = "boot";
146			reg = <0x00000000 0x000a0000>;
147		};
148
149		partition@a0000 {
150			label = "env";
151			reg = <0x000a0000 0x00060000>;
152		};
153
154		partition@100000 {
155			label = "system";
156			reg = <0x00100000 0x00600000>;
157		};
158
159		partition@700000 {
160			label = "rootfs";
161			reg = <0x00700000 0x01900000>;
162		};
163	};
164};
165
166&sata_phy0 {
167	status = "okay";
168};
169
170&sata_phy1 {
171	status = "okay";
172};
173
174&sata {
175	status = "okay";
176};
177
178&uart0 {
179	status = "okay";
180};
181
182&usb3_phy {
183	status = "okay";
184};
185
186&xhci {
187	status = "okay";
188};
189