1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Copyright 2015-2017 Google, Inc 4 */ 5 6 #ifndef __LINUX_USB_TCPM_H 7 #define __LINUX_USB_TCPM_H 8 9 #include <linux/bitops.h> 10 #include <linux/usb/typec.h> 11 #include "pd.h" 12 13 enum typec_cc_status { 14 TYPEC_CC_OPEN, 15 TYPEC_CC_RA, 16 TYPEC_CC_RD, 17 TYPEC_CC_RP_DEF, 18 TYPEC_CC_RP_1_5, 19 TYPEC_CC_RP_3_0, 20 }; 21 22 enum typec_cc_polarity { 23 TYPEC_POLARITY_CC1, 24 TYPEC_POLARITY_CC2, 25 }; 26 27 /* Time to wait for TCPC to complete transmit */ 28 #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ 29 #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) 30 #define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10) 31 32 enum tcpm_transmit_status { 33 TCPC_TX_SUCCESS = 0, 34 TCPC_TX_DISCARDED = 1, 35 TCPC_TX_FAILED = 2, 36 }; 37 38 enum tcpm_transmit_type { 39 TCPC_TX_SOP = 0, 40 TCPC_TX_SOP_PRIME = 1, 41 TCPC_TX_SOP_PRIME_PRIME = 2, 42 TCPC_TX_SOP_DEBUG_PRIME = 3, 43 TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4, 44 TCPC_TX_HARD_RESET = 5, 45 TCPC_TX_CABLE_RESET = 6, 46 TCPC_TX_BIST_MODE_2 = 7 47 }; 48 49 /** 50 * struct tcpc_config - Port configuration 51 * @src_pdo: PDO parameters sent to port partner as response to 52 * PD_CTRL_GET_SOURCE_CAP message 53 * @nr_src_pdo: Number of entries in @src_pdo 54 * @snk_pdo: PDO parameters sent to partner as response to 55 * PD_CTRL_GET_SINK_CAP message 56 * @nr_snk_pdo: Number of entries in @snk_pdo 57 * @operating_snk_mw: 58 * Required operating sink power in mW 59 * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or 60 * TYPEC_PORT_DRP) 61 * @default_role: 62 * Default port role (TYPEC_SINK or TYPEC_SOURCE). 63 * Set to TYPEC_NO_PREFERRED_ROLE if no default role. 64 * @try_role_hw:True if try.{Src,Snk} is implemented in hardware 65 * @alt_modes: List of supported alternate modes 66 */ 67 struct tcpc_config { 68 const u32 *src_pdo; 69 unsigned int nr_src_pdo; 70 71 const u32 *snk_pdo; 72 unsigned int nr_snk_pdo; 73 74 const u32 *snk_vdo; 75 unsigned int nr_snk_vdo; 76 77 unsigned int operating_snk_mw; 78 79 enum typec_port_type type; 80 enum typec_port_data data; 81 enum typec_role default_role; 82 bool try_role_hw; /* try.{src,snk} implemented in hardware */ 83 bool self_powered; /* port belongs to a self powered device */ 84 85 const struct typec_altmode_desc *alt_modes; 86 }; 87 88 /* Mux state attributes */ 89 #define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */ 90 #define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */ 91 #define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */ 92 93 /** 94 * struct tcpc_dev - Port configuration and callback functions 95 * @config: Pointer to port configuration 96 * @fwnode: Pointer to port fwnode 97 * @get_vbus: Called to read current VBUS state 98 * @get_current_limit: 99 * Optional; called by the tcpm core when configured as a snk 100 * and cc=Rp-def. This allows the tcpm to provide a fallback 101 * current-limit detection method for the cc=Rp-def case. 102 * For example, some tcpcs may include BC1.2 charger detection 103 * and use that in this case. 104 * @set_cc: Called to set value of CC pins 105 * @get_cc: Called to read current CC pin values 106 * @set_polarity: 107 * Called to set polarity 108 * @set_vconn: Called to enable or disable VCONN 109 * @set_vbus: Called to enable or disable VBUS 110 * @set_current_limit: 111 * Optional; called to set current limit as negotiated 112 * with partner. 113 * @set_pd_rx: Called to enable or disable reception of PD messages 114 * @set_roles: Called to set power and data roles 115 * @start_toggling: 116 * Optional; if supported by hardware, called to start dual-role 117 * toggling or single-role connection detection. Toggling stops 118 * automatically if a connection is established. 119 * @try_role: Optional; called to set a preferred role 120 * @pd_transmit:Called to transmit PD message 121 * @mux: Pointer to multiplexer data 122 */ 123 struct tcpc_dev { 124 const struct tcpc_config *config; 125 struct fwnode_handle *fwnode; 126 127 int (*init)(struct tcpc_dev *dev); 128 int (*get_vbus)(struct tcpc_dev *dev); 129 int (*get_current_limit)(struct tcpc_dev *dev); 130 int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc); 131 int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1, 132 enum typec_cc_status *cc2); 133 int (*set_polarity)(struct tcpc_dev *dev, 134 enum typec_cc_polarity polarity); 135 int (*set_vconn)(struct tcpc_dev *dev, bool on); 136 int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); 137 int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); 138 int (*set_pd_rx)(struct tcpc_dev *dev, bool on); 139 int (*set_roles)(struct tcpc_dev *dev, bool attached, 140 enum typec_role role, enum typec_data_role data); 141 int (*start_toggling)(struct tcpc_dev *dev, 142 enum typec_port_type port_type, 143 enum typec_cc_status cc); 144 int (*try_role)(struct tcpc_dev *dev, int role); 145 int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, 146 const struct pd_message *msg); 147 }; 148 149 struct tcpm_port; 150 151 struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc); 152 void tcpm_unregister_port(struct tcpm_port *port); 153 154 void tcpm_vbus_change(struct tcpm_port *port); 155 void tcpm_cc_change(struct tcpm_port *port); 156 void tcpm_pd_receive(struct tcpm_port *port, 157 const struct pd_message *msg); 158 void tcpm_pd_transmit_complete(struct tcpm_port *port, 159 enum tcpm_transmit_status status); 160 void tcpm_pd_hard_reset(struct tcpm_port *port); 161 void tcpm_tcpc_reset(struct tcpm_port *port); 162 163 #endif /* __LINUX_USB_TCPM_H */ 164
