1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Simple synchronous userspace interface to SPI devices
4 *
5 * Copyright (C) 2006 SWAPP
6 * Andrea Paterniani <a.paterniani@swapp-eng.it>
7 * Copyright (C) 2007 David Brownell (simplification, cleanup)
8 */
9
10 #include <linux/init.h>
11 #include <linux/module.h>
12 #include <linux/ioctl.h>
13 #include <linux/fs.h>
14 #include <linux/device.h>
15 #include <linux/err.h>
16 #include <linux/list.h>
17 #include <linux/errno.h>
18 #include <linux/mutex.h>
19 #include <linux/slab.h>
20 #include <linux/compat.h>
21 #include <linux/of.h>
22 #include <linux/of_device.h>
23 #include <linux/acpi.h>
24
25 #include <linux/spi/spi.h>
26 #include <linux/spi/spidev.h>
27
28 #include <linux/uaccess.h>
29
30
31 /*
32 * This supports access to SPI devices using normal userspace I/O calls.
33 * Note that while traditional UNIX/POSIX I/O semantics are half duplex,
34 * and often mask message boundaries, full SPI support requires full duplex
35 * transfers. There are several kinds of internal message boundaries to
36 * handle chipselect management and other protocol options.
37 *
38 * SPI has a character major number assigned. We allocate minor numbers
39 * dynamically using a bitmask. You must use hotplug tools, such as udev
40 * (or mdev with busybox) to create and destroy the /dev/spidevB.C device
41 * nodes, since there is no fixed association of minor numbers with any
42 * particular SPI bus or device.
43 */
44 #define SPIDEV_MAJOR 153 /* assigned */
45 #define N_SPI_MINORS 32 /* ... up to 256 */
46
47 static DECLARE_BITMAP(minors, N_SPI_MINORS);
48
49
50 /* Bit masks for spi_device.mode management. Note that incorrect
51 * settings for some settings can cause *lots* of trouble for other
52 * devices on a shared bus:
53 *
54 * - CS_HIGH ... this device will be active when it shouldn't be
55 * - 3WIRE ... when active, it won't behave as it should
56 * - NO_CS ... there will be no explicit message boundaries; this
57 * is completely incompatible with the shared bus model
58 * - READY ... transfers may proceed when they shouldn't.
59 *
60 * REVISIT should changing those flags be privileged?
61 */
62 #define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
63 | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
64 | SPI_NO_CS | SPI_READY | SPI_TX_DUAL \
65 | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)
66
67 struct spidev_data {
68 dev_t devt;
69 spinlock_t spi_lock;
70 struct spi_device *spi;
71 struct list_head device_entry;
72
73 /* TX/RX buffers are NULL unless this device is open (users > 0) */
74 struct mutex buf_lock;
75 unsigned users;
76 u8 *tx_buffer;
77 u8 *rx_buffer;
78 u32 speed_hz;
79 };
80
81 static LIST_HEAD(device_list);
82 static DEFINE_MUTEX(device_list_lock);
83
84 static unsigned bufsiz = 4096;
85 module_param(bufsiz, uint, S_IRUGO);
86 MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message");
87
88 /*-------------------------------------------------------------------------*/
89
90 static ssize_t
spidev_sync(struct spidev_data * spidev,struct spi_message * message)91 spidev_sync(struct spidev_data *spidev, struct spi_message *message)
92 {
93 int status;
94 struct spi_device *spi;
95
96 spin_lock_irq(&spidev->spi_lock);
97 spi = spidev->spi;
98 spin_unlock_irq(&spidev->spi_lock);
99
100 if (spi == NULL)
101 status = -ESHUTDOWN;
102 else
103 status = spi_sync(spi, message);
104
105 if (status == 0)
106 status = message->actual_length;
107
108 return status;
109 }
110
111 static inline ssize_t
spidev_sync_write(struct spidev_data * spidev,size_t len)112 spidev_sync_write(struct spidev_data *spidev, size_t len)
113 {
114 struct spi_transfer t = {
115 .tx_buf = spidev->tx_buffer,
116 .len = len,
117 .speed_hz = spidev->speed_hz,
118 };
119 struct spi_message m;
120
121 spi_message_init(&m);
122 spi_message_add_tail(&t, &m);
123 return spidev_sync(spidev, &m);
124 }
125
126 static inline ssize_t
spidev_sync_read(struct spidev_data * spidev,size_t len)127 spidev_sync_read(struct spidev_data *spidev, size_t len)
128 {
129 struct spi_transfer t = {
130 .rx_buf = spidev->rx_buffer,
131 .len = len,
132 .speed_hz = spidev->speed_hz,
133 };
134 struct spi_message m;
135
136 spi_message_init(&m);
137 spi_message_add_tail(&t, &m);
138 return spidev_sync(spidev, &m);
139 }
140
141 /*-------------------------------------------------------------------------*/
142
143 /* Read-only message with current device setup */
144 static ssize_t
spidev_read(struct file * filp,char __user * buf,size_t count,loff_t * f_pos)145 spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
146 {
147 struct spidev_data *spidev;
148 ssize_t status = 0;
149
150 /* chipselect only toggles at start or end of operation */
151 if (count > bufsiz)
152 return -EMSGSIZE;
153
154 spidev = filp->private_data;
155
156 mutex_lock(&spidev->buf_lock);
157 status = spidev_sync_read(spidev, count);
158 if (status > 0) {
159 unsigned long missing;
160
161 missing = copy_to_user(buf, spidev->rx_buffer, status);
162 if (missing == status)
163 status = -EFAULT;
164 else
165 status = status - missing;
166 }
167 mutex_unlock(&spidev->buf_lock);
168
169 return status;
170 }
171
172 /* Write-only message with current device setup */
173 static ssize_t
spidev_write(struct file * filp,const char __user * buf,size_t count,loff_t * f_pos)174 spidev_write(struct file *filp, const char __user *buf,
175 size_t count, loff_t *f_pos)
176 {
177 struct spidev_data *spidev;
178 ssize_t status = 0;
179 unsigned long missing;
180
181 /* chipselect only toggles at start or end of operation */
182 if (count > bufsiz)
183 return -EMSGSIZE;
184
185 spidev = filp->private_data;
186
187 mutex_lock(&spidev->buf_lock);
188 missing = copy_from_user(spidev->tx_buffer, buf, count);
189 if (missing == 0)
190 status = spidev_sync_write(spidev, count);
191 else
192 status = -EFAULT;
193 mutex_unlock(&spidev->buf_lock);
194
195 return status;
196 }
197
spidev_message(struct spidev_data * spidev,struct spi_ioc_transfer * u_xfers,unsigned n_xfers)198 static int spidev_message(struct spidev_data *spidev,
199 struct spi_ioc_transfer *u_xfers, unsigned n_xfers)
200 {
201 struct spi_message msg;
202 struct spi_transfer *k_xfers;
203 struct spi_transfer *k_tmp;
204 struct spi_ioc_transfer *u_tmp;
205 unsigned n, total, tx_total, rx_total;
206 u8 *tx_buf, *rx_buf;
207 int status = -EFAULT;
208
209 spi_message_init(&msg);
210 k_xfers = kcalloc(n_xfers, sizeof(*k_tmp), GFP_KERNEL);
211 if (k_xfers == NULL)
212 return -ENOMEM;
213
214 /* Construct spi_message, copying any tx data to bounce buffer.
215 * We walk the array of user-provided transfers, using each one
216 * to initialize a kernel version of the same transfer.
217 */
218 tx_buf = spidev->tx_buffer;
219 rx_buf = spidev->rx_buffer;
220 total = 0;
221 tx_total = 0;
222 rx_total = 0;
223 for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
224 n;
225 n--, k_tmp++, u_tmp++) {
226 k_tmp->len = u_tmp->len;
227
228 total += k_tmp->len;
229 /* Since the function returns the total length of transfers
230 * on success, restrict the total to positive int values to
231 * avoid the return value looking like an error. Also check
232 * each transfer length to avoid arithmetic overflow.
233 */
234 if (total > INT_MAX || k_tmp->len > INT_MAX) {
235 status = -EMSGSIZE;
236 goto done;
237 }
238
239 if (u_tmp->rx_buf) {
240 /* this transfer needs space in RX bounce buffer */
241 rx_total += k_tmp->len;
242 if (rx_total > bufsiz) {
243 status = -EMSGSIZE;
244 goto done;
245 }
246 k_tmp->rx_buf = rx_buf;
247 rx_buf += k_tmp->len;
248 }
249 if (u_tmp->tx_buf) {
250 /* this transfer needs space in TX bounce buffer */
251 tx_total += k_tmp->len;
252 if (tx_total > bufsiz) {
253 status = -EMSGSIZE;
254 goto done;
255 }
256 k_tmp->tx_buf = tx_buf;
257 if (copy_from_user(tx_buf, (const u8 __user *)
258 (uintptr_t) u_tmp->tx_buf,
259 u_tmp->len))
260 goto done;
261 tx_buf += k_tmp->len;
262 }
263
264 k_tmp->cs_change = !!u_tmp->cs_change;
265 k_tmp->tx_nbits = u_tmp->tx_nbits;
266 k_tmp->rx_nbits = u_tmp->rx_nbits;
267 k_tmp->bits_per_word = u_tmp->bits_per_word;
268 k_tmp->delay_usecs = u_tmp->delay_usecs;
269 k_tmp->speed_hz = u_tmp->speed_hz;
270 k_tmp->word_delay_usecs = u_tmp->word_delay_usecs;
271 if (!k_tmp->speed_hz)
272 k_tmp->speed_hz = spidev->speed_hz;
273 #ifdef VERBOSE
274 dev_dbg(&spidev->spi->dev,
275 " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n",
276 u_tmp->len,
277 u_tmp->rx_buf ? "rx " : "",
278 u_tmp->tx_buf ? "tx " : "",
279 u_tmp->cs_change ? "cs " : "",
280 u_tmp->bits_per_word ? : spidev->spi->bits_per_word,
281 u_tmp->delay_usecs,
282 u_tmp->word_delay_usecs,
283 u_tmp->speed_hz ? : spidev->spi->max_speed_hz);
284 #endif
285 spi_message_add_tail(k_tmp, &msg);
286 }
287
288 status = spidev_sync(spidev, &msg);
289 if (status < 0)
290 goto done;
291
292 /* copy any rx data out of bounce buffer */
293 rx_buf = spidev->rx_buffer;
294 for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
295 if (u_tmp->rx_buf) {
296 if (copy_to_user((u8 __user *)
297 (uintptr_t) u_tmp->rx_buf, rx_buf,
298 u_tmp->len)) {
299 status = -EFAULT;
300 goto done;
301 }
302 rx_buf += u_tmp->len;
303 }
304 }
305 status = total;
306
307 done:
308 kfree(k_xfers);
309 return status;
310 }
311
312 static struct spi_ioc_transfer *
spidev_get_ioc_message(unsigned int cmd,struct spi_ioc_transfer __user * u_ioc,unsigned * n_ioc)313 spidev_get_ioc_message(unsigned int cmd, struct spi_ioc_transfer __user *u_ioc,
314 unsigned *n_ioc)
315 {
316 u32 tmp;
317
318 /* Check type, command number and direction */
319 if (_IOC_TYPE(cmd) != SPI_IOC_MAGIC
320 || _IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
321 || _IOC_DIR(cmd) != _IOC_WRITE)
322 return ERR_PTR(-ENOTTY);
323
324 tmp = _IOC_SIZE(cmd);
325 if ((tmp % sizeof(struct spi_ioc_transfer)) != 0)
326 return ERR_PTR(-EINVAL);
327 *n_ioc = tmp / sizeof(struct spi_ioc_transfer);
328 if (*n_ioc == 0)
329 return NULL;
330
331 /* copy into scratch area */
332 return memdup_user(u_ioc, tmp);
333 }
334
335 static long
spidev_ioctl(struct file * filp,unsigned int cmd,unsigned long arg)336 spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
337 {
338 int retval = 0;
339 struct spidev_data *spidev;
340 struct spi_device *spi;
341 u32 tmp;
342 unsigned n_ioc;
343 struct spi_ioc_transfer *ioc;
344
345 /* Check type and command number */
346 if (_IOC_TYPE(cmd) != SPI_IOC_MAGIC)
347 return -ENOTTY;
348
349 /* guard against device removal before, or while,
350 * we issue this ioctl.
351 */
352 spidev = filp->private_data;
353 spin_lock_irq(&spidev->spi_lock);
354 spi = spi_dev_get(spidev->spi);
355 spin_unlock_irq(&spidev->spi_lock);
356
357 if (spi == NULL)
358 return -ESHUTDOWN;
359
360 /* use the buffer lock here for triple duty:
361 * - prevent I/O (from us) so calling spi_setup() is safe;
362 * - prevent concurrent SPI_IOC_WR_* from morphing
363 * data fields while SPI_IOC_RD_* reads them;
364 * - SPI_IOC_MESSAGE needs the buffer locked "normally".
365 */
366 mutex_lock(&spidev->buf_lock);
367
368 switch (cmd) {
369 /* read requests */
370 case SPI_IOC_RD_MODE:
371 retval = put_user(spi->mode & SPI_MODE_MASK,
372 (__u8 __user *)arg);
373 break;
374 case SPI_IOC_RD_MODE32:
375 retval = put_user(spi->mode & SPI_MODE_MASK,
376 (__u32 __user *)arg);
377 break;
378 case SPI_IOC_RD_LSB_FIRST:
379 retval = put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0,
380 (__u8 __user *)arg);
381 break;
382 case SPI_IOC_RD_BITS_PER_WORD:
383 retval = put_user(spi->bits_per_word, (__u8 __user *)arg);
384 break;
385 case SPI_IOC_RD_MAX_SPEED_HZ:
386 retval = put_user(spidev->speed_hz, (__u32 __user *)arg);
387 break;
388
389 /* write requests */
390 case SPI_IOC_WR_MODE:
391 case SPI_IOC_WR_MODE32:
392 if (cmd == SPI_IOC_WR_MODE)
393 retval = get_user(tmp, (u8 __user *)arg);
394 else
395 retval = get_user(tmp, (u32 __user *)arg);
396 if (retval == 0) {
397 u32 save = spi->mode;
398
399 if (tmp & ~SPI_MODE_MASK) {
400 retval = -EINVAL;
401 break;
402 }
403
404 tmp |= spi->mode & ~SPI_MODE_MASK;
405 spi->mode = (u16)tmp;
406 retval = spi_setup(spi);
407 if (retval < 0)
408 spi->mode = save;
409 else
410 dev_dbg(&spi->dev, "spi mode %x\n", tmp);
411 }
412 break;
413 case SPI_IOC_WR_LSB_FIRST:
414 retval = get_user(tmp, (__u8 __user *)arg);
415 if (retval == 0) {
416 u32 save = spi->mode;
417
418 if (tmp)
419 spi->mode |= SPI_LSB_FIRST;
420 else
421 spi->mode &= ~SPI_LSB_FIRST;
422 retval = spi_setup(spi);
423 if (retval < 0)
424 spi->mode = save;
425 else
426 dev_dbg(&spi->dev, "%csb first\n",
427 tmp ? 'l' : 'm');
428 }
429 break;
430 case SPI_IOC_WR_BITS_PER_WORD:
431 retval = get_user(tmp, (__u8 __user *)arg);
432 if (retval == 0) {
433 u8 save = spi->bits_per_word;
434
435 spi->bits_per_word = tmp;
436 retval = spi_setup(spi);
437 if (retval < 0)
438 spi->bits_per_word = save;
439 else
440 dev_dbg(&spi->dev, "%d bits per word\n", tmp);
441 }
442 break;
443 case SPI_IOC_WR_MAX_SPEED_HZ:
444 retval = get_user(tmp, (__u32 __user *)arg);
445 if (retval == 0) {
446 u32 save = spi->max_speed_hz;
447
448 spi->max_speed_hz = tmp;
449 retval = spi_setup(spi);
450 if (retval >= 0)
451 spidev->speed_hz = tmp;
452 else
453 dev_dbg(&spi->dev, "%d Hz (max)\n", tmp);
454 spi->max_speed_hz = save;
455 }
456 break;
457
458 default:
459 /* segmented and/or full-duplex I/O request */
460 /* Check message and copy into scratch area */
461 ioc = spidev_get_ioc_message(cmd,
462 (struct spi_ioc_transfer __user *)arg, &n_ioc);
463 if (IS_ERR(ioc)) {
464 retval = PTR_ERR(ioc);
465 break;
466 }
467 if (!ioc)
468 break; /* n_ioc is also 0 */
469
470 /* translate to spi_message, execute */
471 retval = spidev_message(spidev, ioc, n_ioc);
472 kfree(ioc);
473 break;
474 }
475
476 mutex_unlock(&spidev->buf_lock);
477 spi_dev_put(spi);
478 return retval;
479 }
480
481 #ifdef CONFIG_COMPAT
482 static long
spidev_compat_ioc_message(struct file * filp,unsigned int cmd,unsigned long arg)483 spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
484 unsigned long arg)
485 {
486 struct spi_ioc_transfer __user *u_ioc;
487 int retval = 0;
488 struct spidev_data *spidev;
489 struct spi_device *spi;
490 unsigned n_ioc, n;
491 struct spi_ioc_transfer *ioc;
492
493 u_ioc = (struct spi_ioc_transfer __user *) compat_ptr(arg);
494
495 /* guard against device removal before, or while,
496 * we issue this ioctl.
497 */
498 spidev = filp->private_data;
499 spin_lock_irq(&spidev->spi_lock);
500 spi = spi_dev_get(spidev->spi);
501 spin_unlock_irq(&spidev->spi_lock);
502
503 if (spi == NULL)
504 return -ESHUTDOWN;
505
506 /* SPI_IOC_MESSAGE needs the buffer locked "normally" */
507 mutex_lock(&spidev->buf_lock);
508
509 /* Check message and copy into scratch area */
510 ioc = spidev_get_ioc_message(cmd, u_ioc, &n_ioc);
511 if (IS_ERR(ioc)) {
512 retval = PTR_ERR(ioc);
513 goto done;
514 }
515 if (!ioc)
516 goto done; /* n_ioc is also 0 */
517
518 /* Convert buffer pointers */
519 for (n = 0; n < n_ioc; n++) {
520 ioc[n].rx_buf = (uintptr_t) compat_ptr(ioc[n].rx_buf);
521 ioc[n].tx_buf = (uintptr_t) compat_ptr(ioc[n].tx_buf);
522 }
523
524 /* translate to spi_message, execute */
525 retval = spidev_message(spidev, ioc, n_ioc);
526 kfree(ioc);
527
528 done:
529 mutex_unlock(&spidev->buf_lock);
530 spi_dev_put(spi);
531 return retval;
532 }
533
534 static long
spidev_compat_ioctl(struct file * filp,unsigned int cmd,unsigned long arg)535 spidev_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
536 {
537 if (_IOC_TYPE(cmd) == SPI_IOC_MAGIC
538 && _IOC_NR(cmd) == _IOC_NR(SPI_IOC_MESSAGE(0))
539 && _IOC_DIR(cmd) == _IOC_WRITE)
540 return spidev_compat_ioc_message(filp, cmd, arg);
541
542 return spidev_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
543 }
544 #else
545 #define spidev_compat_ioctl NULL
546 #endif /* CONFIG_COMPAT */
547
spidev_open(struct inode * inode,struct file * filp)548 static int spidev_open(struct inode *inode, struct file *filp)
549 {
550 struct spidev_data *spidev;
551 int status = -ENXIO;
552
553 mutex_lock(&device_list_lock);
554
555 list_for_each_entry(spidev, &device_list, device_entry) {
556 if (spidev->devt == inode->i_rdev) {
557 status = 0;
558 break;
559 }
560 }
561
562 if (status) {
563 pr_debug("spidev: nothing for minor %d\n", iminor(inode));
564 goto err_find_dev;
565 }
566
567 if (!spidev->tx_buffer) {
568 spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
569 if (!spidev->tx_buffer) {
570 dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
571 status = -ENOMEM;
572 goto err_find_dev;
573 }
574 }
575
576 if (!spidev->rx_buffer) {
577 spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
578 if (!spidev->rx_buffer) {
579 dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
580 status = -ENOMEM;
581 goto err_alloc_rx_buf;
582 }
583 }
584
585 spidev->users++;
586 filp->private_data = spidev;
587 stream_open(inode, filp);
588
589 mutex_unlock(&device_list_lock);
590 return 0;
591
592 err_alloc_rx_buf:
593 kfree(spidev->tx_buffer);
594 spidev->tx_buffer = NULL;
595 err_find_dev:
596 mutex_unlock(&device_list_lock);
597 return status;
598 }
599
spidev_release(struct inode * inode,struct file * filp)600 static int spidev_release(struct inode *inode, struct file *filp)
601 {
602 struct spidev_data *spidev;
603
604 mutex_lock(&device_list_lock);
605 spidev = filp->private_data;
606 filp->private_data = NULL;
607
608 /* last close? */
609 spidev->users--;
610 if (!spidev->users) {
611 int dofree;
612
613 kfree(spidev->tx_buffer);
614 spidev->tx_buffer = NULL;
615
616 kfree(spidev->rx_buffer);
617 spidev->rx_buffer = NULL;
618
619 spin_lock_irq(&spidev->spi_lock);
620 if (spidev->spi)
621 spidev->speed_hz = spidev->spi->max_speed_hz;
622
623 /* ... after we unbound from the underlying device? */
624 dofree = (spidev->spi == NULL);
625 spin_unlock_irq(&spidev->spi_lock);
626
627 if (dofree)
628 kfree(spidev);
629 }
630 mutex_unlock(&device_list_lock);
631
632 return 0;
633 }
634
635 static const struct file_operations spidev_fops = {
636 .owner = THIS_MODULE,
637 /* REVISIT switch to aio primitives, so that userspace
638 * gets more complete API coverage. It'll simplify things
639 * too, except for the locking.
640 */
641 .write = spidev_write,
642 .read = spidev_read,
643 .unlocked_ioctl = spidev_ioctl,
644 .compat_ioctl = spidev_compat_ioctl,
645 .open = spidev_open,
646 .release = spidev_release,
647 .llseek = no_llseek,
648 };
649
650 /*-------------------------------------------------------------------------*/
651
652 /* The main reason to have this class is to make mdev/udev create the
653 * /dev/spidevB.C character device nodes exposing our userspace API.
654 * It also simplifies memory management.
655 */
656
657 static struct class *spidev_class;
658
659 #ifdef CONFIG_OF
660 static const struct of_device_id spidev_dt_ids[] = {
661 { .compatible = "rohm,dh2228fv" },
662 { .compatible = "lineartechnology,ltc2488" },
663 { .compatible = "ge,achc" },
664 { .compatible = "semtech,sx1301" },
665 { .compatible = "lwn,bk4" },
666 { .compatible = "dh,dhcom-board" },
667 { .compatible = "menlo,m53cpld" },
668 {},
669 };
670 MODULE_DEVICE_TABLE(of, spidev_dt_ids);
671 #endif
672
673 #ifdef CONFIG_ACPI
674
675 /* Dummy SPI devices not to be used in production systems */
676 #define SPIDEV_ACPI_DUMMY 1
677
678 static const struct acpi_device_id spidev_acpi_ids[] = {
679 /*
680 * The ACPI SPT000* devices are only meant for development and
681 * testing. Systems used in production should have a proper ACPI
682 * description of the connected peripheral and they should also use
683 * a proper driver instead of poking directly to the SPI bus.
684 */
685 { "SPT0001", SPIDEV_ACPI_DUMMY },
686 { "SPT0002", SPIDEV_ACPI_DUMMY },
687 { "SPT0003", SPIDEV_ACPI_DUMMY },
688 {},
689 };
690 MODULE_DEVICE_TABLE(acpi, spidev_acpi_ids);
691
spidev_probe_acpi(struct spi_device * spi)692 static void spidev_probe_acpi(struct spi_device *spi)
693 {
694 const struct acpi_device_id *id;
695
696 if (!has_acpi_companion(&spi->dev))
697 return;
698
699 id = acpi_match_device(spidev_acpi_ids, &spi->dev);
700 if (WARN_ON(!id))
701 return;
702
703 if (id->driver_data == SPIDEV_ACPI_DUMMY)
704 dev_warn(&spi->dev, "do not use this driver in production systems!\n");
705 }
706 #else
spidev_probe_acpi(struct spi_device * spi)707 static inline void spidev_probe_acpi(struct spi_device *spi) {}
708 #endif
709
710 /*-------------------------------------------------------------------------*/
711
spidev_probe(struct spi_device * spi)712 static int spidev_probe(struct spi_device *spi)
713 {
714 struct spidev_data *spidev;
715 int status;
716 unsigned long minor;
717
718 /*
719 * spidev should never be referenced in DT without a specific
720 * compatible string, it is a Linux implementation thing
721 * rather than a description of the hardware.
722 */
723 WARN(spi->dev.of_node &&
724 of_device_is_compatible(spi->dev.of_node, "spidev"),
725 "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node);
726
727 spidev_probe_acpi(spi);
728
729 /* Allocate driver data */
730 spidev = kzalloc(sizeof(*spidev), GFP_KERNEL);
731 if (!spidev)
732 return -ENOMEM;
733
734 /* Initialize the driver data */
735 spidev->spi = spi;
736 spin_lock_init(&spidev->spi_lock);
737 mutex_init(&spidev->buf_lock);
738
739 INIT_LIST_HEAD(&spidev->device_entry);
740
741 /* If we can allocate a minor number, hook up this device.
742 * Reusing minors is fine so long as udev or mdev is working.
743 */
744 mutex_lock(&device_list_lock);
745 minor = find_first_zero_bit(minors, N_SPI_MINORS);
746 if (minor < N_SPI_MINORS) {
747 struct device *dev;
748
749 spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
750 dev = device_create(spidev_class, &spi->dev, spidev->devt,
751 spidev, "spidev%d.%d",
752 spi->master->bus_num, spi->chip_select);
753 status = PTR_ERR_OR_ZERO(dev);
754 } else {
755 dev_dbg(&spi->dev, "no minor number available!\n");
756 status = -ENODEV;
757 }
758 if (status == 0) {
759 set_bit(minor, minors);
760 list_add(&spidev->device_entry, &device_list);
761 }
762 mutex_unlock(&device_list_lock);
763
764 spidev->speed_hz = spi->max_speed_hz;
765
766 if (status == 0)
767 spi_set_drvdata(spi, spidev);
768 else
769 kfree(spidev);
770
771 return status;
772 }
773
spidev_remove(struct spi_device * spi)774 static int spidev_remove(struct spi_device *spi)
775 {
776 struct spidev_data *spidev = spi_get_drvdata(spi);
777
778 /* make sure ops on existing fds can abort cleanly */
779 spin_lock_irq(&spidev->spi_lock);
780 spidev->spi = NULL;
781 spin_unlock_irq(&spidev->spi_lock);
782
783 /* prevent new opens */
784 mutex_lock(&device_list_lock);
785 list_del(&spidev->device_entry);
786 device_destroy(spidev_class, spidev->devt);
787 clear_bit(MINOR(spidev->devt), minors);
788 if (spidev->users == 0)
789 kfree(spidev);
790 mutex_unlock(&device_list_lock);
791
792 return 0;
793 }
794
795 static struct spi_driver spidev_spi_driver = {
796 .driver = {
797 .name = "spidev",
798 .of_match_table = of_match_ptr(spidev_dt_ids),
799 .acpi_match_table = ACPI_PTR(spidev_acpi_ids),
800 },
801 .probe = spidev_probe,
802 .remove = spidev_remove,
803
804 /* NOTE: suspend/resume methods are not necessary here.
805 * We don't do anything except pass the requests to/from
806 * the underlying controller. The refrigerator handles
807 * most issues; the controller driver handles the rest.
808 */
809 };
810
811 /*-------------------------------------------------------------------------*/
812
spidev_init(void)813 static int __init spidev_init(void)
814 {
815 int status;
816
817 /* Claim our 256 reserved device numbers. Then register a class
818 * that will key udev/mdev to add/remove /dev nodes. Last, register
819 * the driver which manages those device numbers.
820 */
821 BUILD_BUG_ON(N_SPI_MINORS > 256);
822 status = register_chrdev(SPIDEV_MAJOR, "spi", &spidev_fops);
823 if (status < 0)
824 return status;
825
826 spidev_class = class_create(THIS_MODULE, "spidev");
827 if (IS_ERR(spidev_class)) {
828 unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
829 return PTR_ERR(spidev_class);
830 }
831
832 status = spi_register_driver(&spidev_spi_driver);
833 if (status < 0) {
834 class_destroy(spidev_class);
835 unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
836 }
837 return status;
838 }
839 module_init(spidev_init);
840
spidev_exit(void)841 static void __exit spidev_exit(void)
842 {
843 spi_unregister_driver(&spidev_spi_driver);
844 class_destroy(spidev_class);
845 unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
846 }
847 module_exit(spidev_exit);
848
849 MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
850 MODULE_DESCRIPTION("User mode SPI device interface");
851 MODULE_LICENSE("GPL");
852 MODULE_ALIAS("spi:spidev");
853
