1# SPDX-License-Identifier: GPL-2.0-only
2menu "Remoteproc drivers"
3
4config REMOTEPROC
5	bool "Support for Remote Processor subsystem"
6	depends on HAS_DMA
7	select CRC32
8	select FW_LOADER
9	select VIRTIO
10	select WANT_DEV_COREDUMP
11	help
12	  Support for remote processors (such as DSP coprocessors). These
13	  are mainly used on embedded systems.
14
15if REMOTEPROC
16
17config IMX_REMOTEPROC
18	tristate "IMX6/7 remoteproc support"
19	depends on ARCH_MXC
20	help
21	  Say y here to support iMX's remote processors (Cortex M4
22	  on iMX7D) via the remote processor framework.
23
24	  It's safe to say N here.
25
26config OMAP_REMOTEPROC
27	tristate "OMAP remoteproc support"
28	depends on ARCH_OMAP4 || SOC_OMAP5
29	depends on OMAP_IOMMU
30	select MAILBOX
31	select OMAP2PLUS_MBOX
32	help
33	  Say y here to support OMAP's remote processors (dual M3
34	  and DSP on OMAP4) via the remote processor framework.
35
36	  Currently only supported on OMAP4.
37
38	  Usually you want to say Y here, in order to enable multimedia
39	  use-cases to run on your platform (multimedia codecs are
40	  offloaded to remote DSP processors using this framework).
41
42	  It's safe to say N here if you're not interested in multimedia
43	  offloading or just want a bare minimum kernel.
44
45config WKUP_M3_RPROC
46	tristate "AMx3xx Wakeup M3 remoteproc support"
47	depends on SOC_AM33XX || SOC_AM43XX
48	help
49	  Say y here to support Wakeup M3 remote processor on TI AM33xx
50	  and AM43xx family of SoCs.
51
52	  Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
53	  for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
54	  firmware onto these remote processors.
55	  If unsure say N.
56
57config DA8XX_REMOTEPROC
58	tristate "DA8xx/OMAP-L13x remoteproc support"
59	depends on ARCH_DAVINCI_DA8XX
60	depends on DMA_CMA
61	help
62	  Say y here to support DA8xx/OMAP-L13x remote processors via the
63	  remote processor framework.
64
65	  You want to say y here in order to enable AMP
66	  use-cases to run on your platform (multimedia codecs are
67	  offloaded to remote DSP processors using this framework).
68
69	  This module controls the name of the firmware file that gets
70	  loaded on the DSP.  This file must reside in the /lib/firmware
71	  directory.  It can be specified via the module parameter
72	  da8xx_fw_name=<filename>, and if not specified will default to
73	  "rproc-dsp-fw".
74
75	  It's safe to say n here if you're not interested in multimedia
76	  offloading.
77
78config KEYSTONE_REMOTEPROC
79	tristate "Keystone Remoteproc support"
80	depends on ARCH_KEYSTONE
81	help
82	  Say Y here here to support Keystone remote processors (DSP)
83	  via the remote processor framework.
84
85	  It's safe to say N here if you're not interested in the Keystone
86	  DSPs or just want to use a bare minimum kernel.
87
88config QCOM_RPROC_COMMON
89	tristate
90
91config QCOM_Q6V5_COMMON
92	tristate
93	depends on ARCH_QCOM
94	depends on QCOM_SMEM
95
96config QCOM_Q6V5_ADSP
97	tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
98	depends on OF && ARCH_QCOM
99	depends on QCOM_SMEM
100	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
101	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
102	depends on QCOM_SYSMON || QCOM_SYSMON=n
103	select MFD_SYSCON
104	select QCOM_MDT_LOADER
105	select QCOM_Q6V5_COMMON
106	select QCOM_RPROC_COMMON
107	help
108	  Say y here to support the Peripheral Image Loader
109	  for the Qualcomm Technology Inc. ADSP remote processors.
110
111config QCOM_Q6V5_MSS
112	tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
113	depends on OF && ARCH_QCOM
114	depends on QCOM_SMEM
115	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
116	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
117	depends on QCOM_SYSMON || QCOM_SYSMON=n
118	select MFD_SYSCON
119	select QCOM_MDT_LOADER
120	select QCOM_Q6V5_COMMON
121	select QCOM_RPROC_COMMON
122	select QCOM_SCM
123	help
124	  Say y here to support the Qualcomm self-authenticating modem
125	  subsystem based on Hexagon V5.
126
127config QCOM_Q6V5_PAS
128	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
129	depends on OF && ARCH_QCOM
130	depends on QCOM_SMEM
131	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
132	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
133	depends on QCOM_SYSMON || QCOM_SYSMON=n
134	select MFD_SYSCON
135	select QCOM_MDT_LOADER
136	select QCOM_Q6V5_COMMON
137	select QCOM_RPROC_COMMON
138	select QCOM_SCM
139	help
140	  Say y here to support the TrustZone based Peripherial Image Loader
141	  for the Qualcomm Hexagon v5 based remote processors. This is commonly
142	  used to control subsystems such as ADSP, Compute and Sensor.
143
144config QCOM_Q6V5_WCSS
145	tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
146	depends on OF && ARCH_QCOM
147	depends on QCOM_SMEM
148	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
149	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
150	depends on QCOM_SYSMON || QCOM_SYSMON=n
151	select MFD_SYSCON
152	select QCOM_MDT_LOADER
153	select QCOM_Q6V5_COMMON
154	select QCOM_RPROC_COMMON
155	select QCOM_SCM
156	help
157	  Say y here to support the Qualcomm Peripheral Image Loader for the
158	  Hexagon V5 based WCSS remote processors.
159
160config QCOM_SYSMON
161	tristate "Qualcomm sysmon driver"
162	depends on RPMSG
163	depends on ARCH_QCOM
164	depends on NET
165	select QCOM_QMI_HELPERS
166	help
167	  The sysmon driver implements a sysmon QMI client and a handler for
168	  the sys_mon SMD and GLINK channel, which are used for graceful
169	  shutdown, retrieving failure information and propagating information
170	  about other subsystems being shut down.
171
172	  Say y here if your system runs firmware on any other subsystems, e.g.
173	  modem or DSP.
174
175config QCOM_WCNSS_PIL
176	tristate "Qualcomm WCNSS Peripheral Image Loader"
177	depends on OF && ARCH_QCOM
178	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
179	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
180	depends on QCOM_SMEM
181	depends on QCOM_SYSMON || QCOM_SYSMON=n
182	select QCOM_MDT_LOADER
183	select QCOM_RPROC_COMMON
184	select QCOM_SCM
185	help
186	  Say y here to support the Peripheral Image Loader for the Qualcomm
187	  Wireless Connectivity Subsystem.
188
189config ST_REMOTEPROC
190	tristate "ST remoteproc support"
191	depends on ARCH_STI
192	select MAILBOX
193	select STI_MBOX
194	help
195	  Say y here to support ST's adjunct processors via the remote
196	  processor framework.
197	  This can be either built-in or a loadable module.
198
199config ST_SLIM_REMOTEPROC
200	tristate
201
202config STM32_RPROC
203	tristate "STM32 remoteproc support"
204	depends on ARCH_STM32
205	depends on REMOTEPROC
206	select MAILBOX
207	help
208	  Say y here to support STM32 MCU processors via the
209	  remote processor framework.
210
211	  You want to say y here in order to enable AMP
212	  use-cases to run on your platform (dedicated firmware could be
213	  offloaded to remote MCU processors using this framework).
214
215	  This can be either built-in or a loadable module.
216
217endif # REMOTEPROC
218
219endmenu
220