1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Signal trampoline for 64 bits processes in a ppc64 kernel for 4 * use in the vDSO 5 * 6 * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. 7 * Copyright (C) 2004 Alan Modra (amodra@au.ibm.com)), IBM Corp. 8 */ 9#include <asm/processor.h> 10#include <asm/ppc_asm.h> 11#include <asm/unistd.h> 12#include <asm/vdso.h> 13#include <asm/ptrace.h> /* XXX for __SIGNAL_FRAMESIZE */ 14 15 .text 16 17/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from 18 the return address to get an address in the middle of the presumed 19 call instruction. Since we don't have a call here, we artificially 20 extend the range covered by the unwind info by padding before the 21 real start. */ 22 nop 23 .balign 8 24V_FUNCTION_BEGIN(__kernel_sigtramp_rt64) 25.Lsigrt_start = . - 4 26 addi r1, r1, __SIGNAL_FRAMESIZE 27 li r0,__NR_rt_sigreturn 28 sc 29.Lsigrt_end: 30V_FUNCTION_END(__kernel_sigtramp_rt64) 31/* The ".balign 8" above and the following zeros mimic the old stack 32 trampoline layout. The last magic value is the ucontext pointer, 33 chosen in such a way that older libgcc unwind code returns a zero 34 for a sigcontext pointer. */ 35 .long 0,0,0 36 .quad 0,-21*8 37 38/* Register r1 can be found at offset 8 of a pt_regs structure. 39 A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ 40#define cfa_save \ 41 .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ 42 .uleb128 9f - 1f; /* length */ \ 431: \ 44 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 45 .byte 0x06; /* DW_OP_deref */ \ 46 .byte 0x23; .uleb128 RSIZE; /* DW_OP_plus_uconst */ \ 47 .byte 0x06; /* DW_OP_deref */ \ 489: 49 50/* Register REGNO can be found at offset OFS of a pt_regs structure. 51 A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ 52#define rsave(regno, ofs) \ 53 .byte 0x10; /* DW_CFA_expression */ \ 54 .uleb128 regno; /* regno */ \ 55 .uleb128 9f - 1f; /* length */ \ 561: \ 57 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 58 .byte 0x06; /* DW_OP_deref */ \ 59 .ifne ofs; \ 60 .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ 61 .endif; \ 629: 63 64/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 65 of the VMX reg struct. A pointer to the VMX reg struct is at VREGS in 66 the pt_regs struct. This macro is for REGNO == 0, and contains 67 'subroutines' that the other macros jump to. */ 68#define vsave_msr0(regno) \ 69 .byte 0x10; /* DW_CFA_expression */ \ 70 .uleb128 regno + 77; /* regno */ \ 71 .uleb128 9f - 1f; /* length */ \ 721: \ 73 .byte 0x30 + regno; /* DW_OP_lit0 */ \ 742: \ 75 .byte 0x40; /* DW_OP_lit16 */ \ 76 .byte 0x1e; /* DW_OP_mul */ \ 773: \ 78 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 79 .byte 0x06; /* DW_OP_deref */ \ 80 .byte 0x12; /* DW_OP_dup */ \ 81 .byte 0x23; /* DW_OP_plus_uconst */ \ 82 .uleb128 33*RSIZE; /* msr offset */ \ 83 .byte 0x06; /* DW_OP_deref */ \ 84 .byte 0x0c; .long 1 << 25; /* DW_OP_const4u */ \ 85 .byte 0x1a; /* DW_OP_and */ \ 86 .byte 0x12; /* DW_OP_dup, ret 0 if bra taken */ \ 87 .byte 0x30; /* DW_OP_lit0 */ \ 88 .byte 0x29; /* DW_OP_eq */ \ 89 .byte 0x28; .short 0x7fff; /* DW_OP_bra to end */ \ 90 .byte 0x13; /* DW_OP_drop, pop the 0 */ \ 91 .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ 92 .byte 0x06; /* DW_OP_deref */ \ 93 .byte 0x22; /* DW_OP_plus */ \ 94 .byte 0x2f; .short 0x7fff; /* DW_OP_skip to end */ \ 959: 96 97/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 98 of the VMX reg struct. REGNO is 1 thru 31. */ 99#define vsave_msr1(regno) \ 100 .byte 0x10; /* DW_CFA_expression */ \ 101 .uleb128 regno + 77; /* regno */ \ 102 .uleb128 9f - 1f; /* length */ \ 1031: \ 104 .byte 0x30 + regno; /* DW_OP_lit n */ \ 105 .byte 0x2f; .short 2b - 9f; /* DW_OP_skip */ \ 1069: 107 108/* If msr bit 1<<25 is set, then VMX register REGNO is at offset OFS of 109 the VMX save block. */ 110#define vsave_msr2(regno, ofs) \ 111 .byte 0x10; /* DW_CFA_expression */ \ 112 .uleb128 regno + 77; /* regno */ \ 113 .uleb128 9f - 1f; /* length */ \ 1141: \ 115 .byte 0x0a; .short ofs; /* DW_OP_const2u */ \ 116 .byte 0x2f; .short 3b - 9f; /* DW_OP_skip */ \ 1179: 118 119/* VMX register REGNO is at offset OFS of the VMX save area. */ 120#define vsave(regno, ofs) \ 121 .byte 0x10; /* DW_CFA_expression */ \ 122 .uleb128 regno + 77; /* regno */ \ 123 .uleb128 9f - 1f; /* length */ \ 1241: \ 125 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 126 .byte 0x06; /* DW_OP_deref */ \ 127 .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ 128 .byte 0x06; /* DW_OP_deref */ \ 129 .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ 1309: 131 132/* This is where the pt_regs pointer can be found on the stack. */ 133#define PTREGS 128+168+56 134 135/* Size of regs. */ 136#define RSIZE 8 137 138/* Size of CR reg in DWARF unwind info. */ 139#define CRSIZE 4 140 141/* Offset of CR reg within a full word. */ 142#ifdef __LITTLE_ENDIAN__ 143#define CROFF 0 144#else 145#define CROFF (RSIZE - CRSIZE) 146#endif 147 148/* This is the offset of the VMX reg pointer. */ 149#define VREGS 48*RSIZE+33*8 150 151/* Describe where general purpose regs are saved. */ 152#define EH_FRAME_GEN \ 153 cfa_save; \ 154 rsave ( 0, 0*RSIZE); \ 155 rsave ( 2, 2*RSIZE); \ 156 rsave ( 3, 3*RSIZE); \ 157 rsave ( 4, 4*RSIZE); \ 158 rsave ( 5, 5*RSIZE); \ 159 rsave ( 6, 6*RSIZE); \ 160 rsave ( 7, 7*RSIZE); \ 161 rsave ( 8, 8*RSIZE); \ 162 rsave ( 9, 9*RSIZE); \ 163 rsave (10, 10*RSIZE); \ 164 rsave (11, 11*RSIZE); \ 165 rsave (12, 12*RSIZE); \ 166 rsave (13, 13*RSIZE); \ 167 rsave (14, 14*RSIZE); \ 168 rsave (15, 15*RSIZE); \ 169 rsave (16, 16*RSIZE); \ 170 rsave (17, 17*RSIZE); \ 171 rsave (18, 18*RSIZE); \ 172 rsave (19, 19*RSIZE); \ 173 rsave (20, 20*RSIZE); \ 174 rsave (21, 21*RSIZE); \ 175 rsave (22, 22*RSIZE); \ 176 rsave (23, 23*RSIZE); \ 177 rsave (24, 24*RSIZE); \ 178 rsave (25, 25*RSIZE); \ 179 rsave (26, 26*RSIZE); \ 180 rsave (27, 27*RSIZE); \ 181 rsave (28, 28*RSIZE); \ 182 rsave (29, 29*RSIZE); \ 183 rsave (30, 30*RSIZE); \ 184 rsave (31, 31*RSIZE); \ 185 rsave (67, 32*RSIZE); /* ap, used as temp for nip */ \ 186 rsave (65, 36*RSIZE); /* lr */ \ 187 rsave (68, 38*RSIZE + CROFF); /* cr fields */ \ 188 rsave (69, 38*RSIZE + CROFF); \ 189 rsave (70, 38*RSIZE + CROFF); \ 190 rsave (71, 38*RSIZE + CROFF); \ 191 rsave (72, 38*RSIZE + CROFF); \ 192 rsave (73, 38*RSIZE + CROFF); \ 193 rsave (74, 38*RSIZE + CROFF); \ 194 rsave (75, 38*RSIZE + CROFF) 195 196/* Describe where the FP regs are saved. */ 197#define EH_FRAME_FP \ 198 rsave (32, 48*RSIZE + 0*8); \ 199 rsave (33, 48*RSIZE + 1*8); \ 200 rsave (34, 48*RSIZE + 2*8); \ 201 rsave (35, 48*RSIZE + 3*8); \ 202 rsave (36, 48*RSIZE + 4*8); \ 203 rsave (37, 48*RSIZE + 5*8); \ 204 rsave (38, 48*RSIZE + 6*8); \ 205 rsave (39, 48*RSIZE + 7*8); \ 206 rsave (40, 48*RSIZE + 8*8); \ 207 rsave (41, 48*RSIZE + 9*8); \ 208 rsave (42, 48*RSIZE + 10*8); \ 209 rsave (43, 48*RSIZE + 11*8); \ 210 rsave (44, 48*RSIZE + 12*8); \ 211 rsave (45, 48*RSIZE + 13*8); \ 212 rsave (46, 48*RSIZE + 14*8); \ 213 rsave (47, 48*RSIZE + 15*8); \ 214 rsave (48, 48*RSIZE + 16*8); \ 215 rsave (49, 48*RSIZE + 17*8); \ 216 rsave (50, 48*RSIZE + 18*8); \ 217 rsave (51, 48*RSIZE + 19*8); \ 218 rsave (52, 48*RSIZE + 20*8); \ 219 rsave (53, 48*RSIZE + 21*8); \ 220 rsave (54, 48*RSIZE + 22*8); \ 221 rsave (55, 48*RSIZE + 23*8); \ 222 rsave (56, 48*RSIZE + 24*8); \ 223 rsave (57, 48*RSIZE + 25*8); \ 224 rsave (58, 48*RSIZE + 26*8); \ 225 rsave (59, 48*RSIZE + 27*8); \ 226 rsave (60, 48*RSIZE + 28*8); \ 227 rsave (61, 48*RSIZE + 29*8); \ 228 rsave (62, 48*RSIZE + 30*8); \ 229 rsave (63, 48*RSIZE + 31*8) 230 231/* Describe where the VMX regs are saved. */ 232#ifdef CONFIG_ALTIVEC 233#define EH_FRAME_VMX \ 234 vsave_msr0 ( 0); \ 235 vsave_msr1 ( 1); \ 236 vsave_msr1 ( 2); \ 237 vsave_msr1 ( 3); \ 238 vsave_msr1 ( 4); \ 239 vsave_msr1 ( 5); \ 240 vsave_msr1 ( 6); \ 241 vsave_msr1 ( 7); \ 242 vsave_msr1 ( 8); \ 243 vsave_msr1 ( 9); \ 244 vsave_msr1 (10); \ 245 vsave_msr1 (11); \ 246 vsave_msr1 (12); \ 247 vsave_msr1 (13); \ 248 vsave_msr1 (14); \ 249 vsave_msr1 (15); \ 250 vsave_msr1 (16); \ 251 vsave_msr1 (17); \ 252 vsave_msr1 (18); \ 253 vsave_msr1 (19); \ 254 vsave_msr1 (20); \ 255 vsave_msr1 (21); \ 256 vsave_msr1 (22); \ 257 vsave_msr1 (23); \ 258 vsave_msr1 (24); \ 259 vsave_msr1 (25); \ 260 vsave_msr1 (26); \ 261 vsave_msr1 (27); \ 262 vsave_msr1 (28); \ 263 vsave_msr1 (29); \ 264 vsave_msr1 (30); \ 265 vsave_msr1 (31); \ 266 vsave_msr2 (33, 32*16+12); \ 267 vsave (32, 33*16) 268#else 269#define EH_FRAME_VMX 270#endif 271 272 .section .eh_frame,"a",@progbits 273.Lcie: 274 .long .Lcie_end - .Lcie_start 275.Lcie_start: 276 .long 0 /* CIE ID */ 277 .byte 1 /* Version number */ 278 .string "zRS" /* NUL-terminated augmentation string */ 279 .uleb128 4 /* Code alignment factor */ 280 .sleb128 -8 /* Data alignment factor */ 281 .byte 67 /* Return address register column, ap */ 282 .uleb128 1 /* Augmentation value length */ 283 .byte 0x14 /* DW_EH_PE_pcrel | DW_EH_PE_udata8. */ 284 .byte 0x0c,1,0 /* DW_CFA_def_cfa: r1 ofs 0 */ 285 .balign 8 286.Lcie_end: 287 288 .long .Lfde0_end - .Lfde0_start 289.Lfde0_start: 290 .long .Lfde0_start - .Lcie /* CIE pointer. */ 291 .quad .Lsigrt_start - . /* PC start, length */ 292 .quad .Lsigrt_end - .Lsigrt_start 293 .uleb128 0 /* Augmentation */ 294 EH_FRAME_GEN 295 EH_FRAME_FP 296 EH_FRAME_VMX 297# Do we really need to describe the frame at this point? ie. will 298# we ever have some call chain that returns somewhere past the addi? 299# I don't think so, since gcc doesn't support async signals. 300# .byte 0x41 /* DW_CFA_advance_loc 1*4 */ 301#undef PTREGS 302#define PTREGS 168+56 303# EH_FRAME_GEN 304# EH_FRAME_FP 305# EH_FRAME_VMX 306 .balign 8 307.Lfde0_end: 308
