1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _M68KNOMMU_IO_H
3 #define _M68KNOMMU_IO_H
4
5 /*
6 * Convert a physical memory address into a IO memory address.
7 * For us this is trivially a type cast.
8 */
9 #define iomem(a) ((void __iomem *) (a))
10
11 /*
12 * The non-MMU m68k and ColdFire IO and memory mapped hardware access
13 * functions have always worked in CPU native endian. We need to define
14 * that behavior here first before we include asm-generic/io.h.
15 */
16 #define __raw_readb(addr) \
17 ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
18 #define __raw_readw(addr) \
19 ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
20 #define __raw_readl(addr) \
21 ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
22
23 #define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
24 #define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
25 #define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
26
27 #if defined(CONFIG_COLDFIRE)
28 /*
29 * For ColdFire platforms we may need to do some extra checks for what
30 * type of address range we are accessing. Include the ColdFire platform
31 * definitions so we can figure out if need to do something special.
32 */
33 #include <asm/byteorder.h>
34 #include <asm/coldfire.h>
35 #include <asm/mcfsim.h>
36 #endif /* CONFIG_COLDFIRE */
37
38 #if defined(IOMEMBASE)
39 /*
40 * The ColdFire SoC internal peripherals are mapped into virtual address
41 * space using the ACR registers of the cache control unit. This means we
42 * are using a 1:1 physical:virtual mapping for them. We can quickly
43 * determine if we are accessing an internal peripheral device given the
44 * physical or vitrual address using the same range check. This check logic
45 * applies just the same of there is no MMU but something like a PCI bus
46 * is present.
47 */
__cf_internalio(unsigned long addr)48 static int __cf_internalio(unsigned long addr)
49 {
50 return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1);
51 }
52
cf_internalio(const volatile void __iomem * addr)53 static int cf_internalio(const volatile void __iomem *addr)
54 {
55 return __cf_internalio((unsigned long) addr);
56 }
57
58 /*
59 * We need to treat built-in peripherals and bus based address ranges
60 * differently. Local built-in peripherals (and the ColdFire SoC parts
61 * have quite a lot of them) are always native endian - which is big
62 * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus,
63 * are accessed little endian - so we need to byte swap those.
64 */
65 #define readw readw
readw(const volatile void __iomem * addr)66 static inline u16 readw(const volatile void __iomem *addr)
67 {
68 if (cf_internalio(addr))
69 return __raw_readw(addr);
70 return __le16_to_cpu(__raw_readw(addr));
71 }
72
73 #define readl readl
readl(const volatile void __iomem * addr)74 static inline u32 readl(const volatile void __iomem *addr)
75 {
76 if (cf_internalio(addr))
77 return __raw_readl(addr);
78 return __le32_to_cpu(__raw_readl(addr));
79 }
80
81 #define writew writew
writew(u16 value,volatile void __iomem * addr)82 static inline void writew(u16 value, volatile void __iomem *addr)
83 {
84 if (cf_internalio(addr))
85 __raw_writew(value, addr);
86 else
87 __raw_writew(__cpu_to_le16(value), addr);
88 }
89
90 #define writel writel
writel(u32 value,volatile void __iomem * addr)91 static inline void writel(u32 value, volatile void __iomem *addr)
92 {
93 if (cf_internalio(addr))
94 __raw_writel(value, addr);
95 else
96 __raw_writel(__cpu_to_le32(value), addr);
97 }
98
99 #else
100
101 #define readb __raw_readb
102 #define readw __raw_readw
103 #define readl __raw_readl
104 #define writeb __raw_writeb
105 #define writew __raw_writew
106 #define writel __raw_writel
107
108 #endif /* IOMEMBASE */
109
110 #if defined(CONFIG_PCI)
111 /*
112 * Support for PCI bus access uses the asm-generic access functions.
113 * We need to supply the base address and masks for the normal memory
114 * and IO address space mappings.
115 */
116 #define PCI_MEM_PA 0xf0000000 /* Host physical address */
117 #define PCI_MEM_BA 0xf0000000 /* Bus physical address */
118 #define PCI_MEM_SIZE 0x08000000 /* 128 MB */
119 #define PCI_MEM_MASK (PCI_MEM_SIZE - 1)
120
121 #define PCI_IO_PA 0xf8000000 /* Host physical address */
122 #define PCI_IO_BA 0x00000000 /* Bus physical address */
123 #define PCI_IO_SIZE 0x00010000 /* 64k */
124 #define PCI_IO_MASK (PCI_IO_SIZE - 1)
125
126 #define HAVE_ARCH_PIO_SIZE
127 #define PIO_OFFSET 0
128 #define PIO_MASK 0xffff
129 #define PIO_RESERVED 0x10000
130 #define PCI_IOBASE ((void __iomem *) PCI_IO_PA)
131 #define PCI_SPACE_LIMIT PCI_IO_MASK
132 #endif /* CONFIG_PCI */
133
134 #include <asm/kmap.h>
135 #include <asm/virtconvert.h>
136
137 #endif /* _M68KNOMMU_IO_H */
138
