1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/iio/qcom,spmi-vadc.h>
3#include <dt-bindings/interrupt-controller/irq.h>
4#include <dt-bindings/spmi/spmi.h>
5
6&spmi_bus {
7
8	pm8941_0: pm8941@0 {
9		compatible = "qcom,pm8941", "qcom,spmi-pmic";
10		reg = <0x0 SPMI_USID>;
11		#address-cells = <1>;
12		#size-cells = <0>;
13
14		rtc@6000 {
15			compatible = "qcom,pm8941-rtc";
16			reg = <0x6000>,
17			      <0x6100>;
18			reg-names = "rtc", "alarm";
19			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
20		};
21
22		pwrkey@800 {
23			compatible = "qcom,pm8941-pwrkey";
24			reg = <0x800>;
25			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
26			debounce = <15625>;
27			bias-pull-up;
28		};
29
30		usb_id: misc@900 {
31			compatible = "qcom,pm8941-misc";
32			reg = <0x900>;
33			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
34			interrupt-names = "usb_id";
35		};
36
37		smbb: charger@1000 {
38			compatible = "qcom,pm8941-charger";
39			reg = <0x1000>;
40			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
41				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
42				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
43				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
44				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
45				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
46				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
47				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
48			interrupt-names = "chg-done",
49					  "chg-fast",
50					  "chg-trkl",
51					  "bat-temp-ok",
52					  "bat-present",
53					  "chg-gone",
54					  "usb-valid",
55					  "dc-valid";
56
57			usb-otg-in-supply = <&pm8941_5vs1>;
58
59			chg_otg: otg-vbus { };
60		};
61
62		pm8941_gpios: gpios@c000 {
63			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
64			reg = <0xc000>;
65			gpio-controller;
66			gpio-ranges = <&pm8941_gpios 0 0 36>;
67			#gpio-cells = <2>;
68			interrupt-controller;
69			#interrupt-cells = <2>;
70
71			boost_bypass_n_pin: boost-bypass {
72				pins = "gpio21";
73				function = "normal";
74			};
75		};
76
77		pm8941_mpps: mpps@a000 {
78			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
79			reg = <0xa000>;
80			gpio-controller;
81			#gpio-cells = <2>;
82			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
83				     <0 0xa1 0 IRQ_TYPE_NONE>,
84				     <0 0xa2 0 IRQ_TYPE_NONE>,
85				     <0 0xa3 0 IRQ_TYPE_NONE>,
86				     <0 0xa4 0 IRQ_TYPE_NONE>,
87				     <0 0xa5 0 IRQ_TYPE_NONE>,
88				     <0 0xa6 0 IRQ_TYPE_NONE>,
89				     <0 0xa7 0 IRQ_TYPE_NONE>;
90		};
91
92		pm8941_temp: temp-alarm@2400 {
93			compatible = "qcom,spmi-temp-alarm";
94			reg = <0x2400>;
95			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
96			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
97			io-channel-names = "thermal";
98			#thermal-sensor-cells = <0>;
99		};
100
101		pm8941_vadc: vadc@3100 {
102			compatible = "qcom,spmi-vadc";
103			reg = <0x3100>;
104			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
105			#address-cells = <1>;
106			#size-cells = <0>;
107			#io-channel-cells = <1>;
108
109			bat_temp {
110				reg = <VADC_LR_MUX1_BAT_THERM>;
111			};
112			die_temp {
113				reg = <VADC_DIE_TEMP>;
114			};
115			ref_625mv {
116				reg = <VADC_REF_625MV>;
117			};
118			ref_1250v {
119				reg = <VADC_REF_1250MV>;
120			};
121			ref_gnd {
122				reg = <VADC_GND_REF>;
123			};
124			ref_vdd {
125				reg = <VADC_VDD_VADC>;
126			};
127			vbat_sns {
128				reg = <VADC_VBAT_SNS>;
129			};
130		};
131
132		pm8941_iadc: iadc@3600 {
133			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
134			reg = <0x3600>;
135			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
136			qcom,external-resistor-micro-ohms = <10000>;
137		};
138
139		coincell@2800 {
140			compatible = "qcom,pm8941-coincell";
141			reg = <0x2800>;
142			status = "disabled";
143		};
144	};
145
146	pm8941_1: pm8941@1 {
147		compatible = "qcom,pm8941", "qcom,spmi-pmic";
148		reg = <0x1 SPMI_USID>;
149		#address-cells = <1>;
150		#size-cells = <0>;
151
152		pm8941_wled: wled@d800 {
153			compatible = "qcom,pm8941-wled";
154			reg = <0xd800>;
155			label = "backlight";
156
157			status = "disabled";
158		};
159
160		regulators {
161			compatible = "qcom,pm8941-regulators";
162			interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
163			interrupt-names = "ocp-5vs1", "ocp-5vs2";
164			vin_5vs-supply = <&pm8941_5v>;
165
166			pm8941_5v: s4 {
167				regulator-min-microvolt = <5000000>;
168				regulator-max-microvolt = <5000000>;
169				regulator-enable-ramp-delay = <500>;
170			};
171
172			pm8941_5vs1: 5vs1 {
173				regulator-enable-ramp-delay = <1000>;
174				regulator-pull-down;
175				regulator-over-current-protection;
176				qcom,ocp-max-retries = <10>;
177				qcom,ocp-retry-delay = <30>;
178				qcom,vs-soft-start-strength = <0>;
179				regulator-initial-mode = <1>;
180			};
181		};
182	};
183};
184