1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Common Device Tree Source for IGEPv2 4 * 5 * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> 6 * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> 7 */ 8 9#include "omap3-igep.dtsi" 10#include "omap-gpmc-smsc9221.dtsi" 11 12/ { 13 14 leds { 15 pinctrl-names = "default"; 16 pinctrl-0 = <&leds_pins>; 17 compatible = "gpio-leds"; 18 19 boot { 20 label = "omap3:green:boot"; 21 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; 22 default-state = "on"; 23 }; 24 25 user0 { 26 label = "omap3:red:user0"; 27 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; 28 default-state = "off"; 29 }; 30 31 user1 { 32 label = "omap3:red:user1"; 33 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; 34 default-state = "off"; 35 }; 36 37 user2 { 38 label = "omap3:green:user1"; 39 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; 40 }; 41 }; 42 43 /* HS USB Port 1 Power */ 44 hsusb1_power: hsusb1_power_reg { 45 compatible = "regulator-fixed"; 46 regulator-name = "hsusb1_vbus"; 47 regulator-min-microvolt = <3300000>; 48 regulator-max-microvolt = <3300000>; 49 gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */ 50 startup-delay-us = <70000>; 51 }; 52 53 /* HS USB Host PHY on PORT 1 */ 54 hsusb1_phy: hsusb1_phy { 55 compatible = "usb-nop-xceiv"; 56 reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ 57 vcc-supply = <&hsusb1_power>; 58 #phy-cells = <0>; 59 }; 60 61 tfp410: encoder { 62 compatible = "ti,tfp410"; 63 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ 64 65 ports { 66 #address-cells = <1>; 67 #size-cells = <0>; 68 69 port@0 { 70 reg = <0>; 71 72 tfp410_in: endpoint { 73 remote-endpoint = <&dpi_out>; 74 }; 75 }; 76 77 port@1 { 78 reg = <1>; 79 80 tfp410_out: endpoint { 81 remote-endpoint = <&dvi_connector_in>; 82 }; 83 }; 84 }; 85 }; 86 87 dvi0: connector { 88 compatible = "dvi-connector"; 89 label = "dvi"; 90 91 digital; 92 93 ddc-i2c-bus = <&i2c3>; 94 95 port { 96 dvi_connector_in: endpoint { 97 remote-endpoint = <&tfp410_out>; 98 }; 99 }; 100 }; 101}; 102 103&omap3_pmx_core { 104 pinctrl-names = "default"; 105 pinctrl-0 = < 106 &tfp410_pins 107 &dss_dpi_pins 108 >; 109 110 tfp410_pins: pinmux_tfp410_pins { 111 pinctrl-single,pins = < 112 OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ 113 >; 114 }; 115 116 dss_dpi_pins: pinmux_dss_dpi_pins { 117 pinctrl-single,pins = < 118 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ 119 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ 120 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ 121 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ 122 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ 123 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ 124 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ 125 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ 126 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ 127 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ 128 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ 129 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ 130 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ 131 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ 132 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ 133 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ 134 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ 135 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ 136 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ 137 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ 138 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ 139 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ 140 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ 141 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ 142 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ 143 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ 144 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ 145 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ 146 >; 147 }; 148 149 uart2_pins: pinmux_uart2_pins { 150 pinctrl-single,pins = < 151 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ 152 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ 153 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ 154 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ 155 >; 156 }; 157 158 smsc9221_pins: pinmux_smsc9221_pins { 159 pinctrl-single,pins = < 160 OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ 161 >; 162 }; 163}; 164 165&omap3_pmx_core2 { 166 pinctrl-names = "default"; 167 pinctrl-0 = < 168 &hsusbb1_pins 169 >; 170 171 hsusbb1_pins: pinmux_hsusbb1_pins { 172 pinctrl-single,pins = < 173 OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ 174 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ 175 OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */ 176 OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */ 177 OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */ 178 OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */ 179 OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */ 180 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */ 181 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */ 182 OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */ 183 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */ 184 OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ 185 >; 186 }; 187 188 leds_pins: pinmux_leds_pins { 189 pinctrl-single,pins = < 190 OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ 191 OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ 192 OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ 193 >; 194 }; 195 196 mmc1_wp_pins: pinmux_mmc1_cd_pins { 197 pinctrl-single,pins = < 198 OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */ 199 >; 200 }; 201}; 202 203&i2c3 { 204 clock-frequency = <100000>; 205 206 /* 207 * Display monitor features are burnt in the EEPROM 208 * as EDID data. 209 */ 210 eeprom@50 { 211 compatible = "ti,eeprom"; 212 reg = <0x50>; 213 }; 214}; 215 216&gpmc { 217 ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */ 218 <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */ 219 220 ethernet@gpmc { 221 pinctrl-names = "default"; 222 pinctrl-0 = <&smsc9221_pins>; 223 reg = <5 0 0xff>; 224 interrupt-parent = <&gpio6>; 225 interrupts = <16 IRQ_TYPE_LEVEL_LOW>; 226 }; 227}; 228 229&uart2 { 230 pinctrl-names = "default"; 231 pinctrl-0 = <&uart2_pins>; 232}; 233 234&usbhshost { 235 port1-mode = "ehci-phy"; 236}; 237 238&usbhsehci { 239 phys = <&hsusb1_phy>; 240}; 241 242&vpll2 { 243 /* Needed for DSS */ 244 regulator-name = "vdds_dsi"; 245}; 246 247&dss { 248 status = "ok"; 249 250 port { 251 dpi_out: endpoint { 252 remote-endpoint = <&tfp410_in>; 253 data-lines = <24>; 254 }; 255 }; 256}; 257 258&mmc1 { 259 pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>; 260 wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */ 261}; 262
