1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2017 Beckhoff Automation GmbH & Co. KG
4 * based on imx53-qsb.dts
5 */
6
7/dts-v1/;
8#include "imx53.dtsi"
9
10/ {
11	model = "Beckhoff CX9020 Embedded PC";
12	compatible = "bhf,cx9020", "fsl,imx53";
13
14	chosen {
15		stdout-path = &uart2;
16	};
17
18	memory@70000000 {
19		device_type = "memory";
20		reg = <0x70000000 0x20000000>,
21		      <0xb0000000 0x20000000>;
22	};
23
24	display-0 {
25		#address-cells =<1>;
26		#size-cells = <0>;
27		compatible = "fsl,imx-parallel-display";
28		interface-pix-fmt = "rgb24";
29		pinctrl-names = "default";
30		pinctrl-0 = <&pinctrl_ipu_disp0>;
31
32		port@0 {
33			reg = <0>;
34
35			display0_in: endpoint {
36				remote-endpoint = <&ipu_di0_disp0>;
37			};
38		};
39
40		port@1 {
41			reg = <1>;
42
43			display0_out: endpoint {
44				remote-endpoint = <&tfp410_in>;
45			};
46		};
47	};
48
49	dvi-connector {
50		compatible = "dvi-connector";
51		ddc-i2c-bus = <&i2c2>;
52		digital;
53
54		port {
55			dvi_connector_in: endpoint {
56				remote-endpoint = <&tfp410_out>;
57			};
58		};
59	};
60
61	dvi-converter {
62		#address-cells = <1>;
63		#size-cells = <0>;
64		compatible = "ti,tfp410";
65
66		port@0 {
67			reg = <0>;
68
69			tfp410_in: endpoint {
70				remote-endpoint = <&display0_out>;
71			};
72		};
73
74		port@1 {
75			reg = <1>;
76
77			tfp410_out: endpoint {
78				remote-endpoint = <&dvi_connector_in>;
79			};
80		};
81	};
82
83	leds {
84		compatible = "gpio-leds";
85
86		pwr-r {
87			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
88			default-state = "off";
89		};
90
91		pwr-g {
92			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
93			default-state = "on";
94		};
95
96		pwr-b {
97			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
98			default-state = "off";
99		};
100
101		sd1-b {
102			linux,default-trigger = "mmc0";
103			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
104		};
105
106		sd2-b {
107			linux,default-trigger = "mmc1";
108			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
109		};
110	};
111
112	regulator-3p2v {
113		compatible = "regulator-fixed";
114		regulator-name = "3P2V";
115		regulator-min-microvolt = <3200000>;
116		regulator-max-microvolt = <3200000>;
117		regulator-always-on;
118	};
119
120	reg_usb_vbus: regulator-vbus {
121		compatible = "regulator-fixed";
122		regulator-name = "usb_vbus";
123		regulator-min-microvolt = <5000000>;
124		regulator-max-microvolt = <5000000>;
125		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
126		enable-active-high;
127	};
128};
129
130&esdhc1 {
131	pinctrl-names = "default";
132	pinctrl-0 = <&pinctrl_esdhc1>;
133	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
134	bus-width = <4>;
135	status = "okay";
136};
137
138&esdhc2 {
139	pinctrl-names = "default";
140	pinctrl-0 = <&pinctrl_esdhc2>;
141	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
142	bus-width = <4>;
143	status = "okay";
144};
145
146&fec {
147	pinctrl-names = "default";
148	pinctrl-0 = <&pinctrl_fec>;
149	phy-mode = "rmii";
150	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
151	status = "okay";
152};
153
154&i2c2 {
155	pinctrl-names = "default";
156	pinctrl-0 = <&pinctrl_i2c2>;
157	status = "okay";
158};
159
160&ipu_di0_disp0 {
161	remote-endpoint = <&display0_in>;
162};
163
164&uart2 {
165	pinctrl-names = "default";
166	pinctrl-0 = <&pinctrl_uart2>;
167	fsl,dte-mode;
168	status = "okay";
169};
170
171&usbh1 {
172	vbus-supply = <&reg_usb_vbus>;
173	phy_type = "utmi";
174	status = "okay";
175};
176
177&usbotg {
178	dr_mode = "peripheral";
179	status = "okay";
180};
181
182&vpu {
183	status = "okay";
184};
185
186&iomuxc {
187	pinctrl-names = "default";
188	pinctrl-0 = <&pinctrl_hog>;
189
190	pinctrl_hog: hoggrp {
191		fsl,pins = <
192			MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
193			MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
194			MX53_PAD_EIM_D22__GPIO3_22              0x1c4
195			MX53_PAD_EIM_D23__GPIO3_23              0x1e4
196			MX53_PAD_EIM_D24__GPIO3_24              0x1e4
197		>;
198	};
199
200	pinctrl_esdhc1: esdhc1grp {
201		fsl,pins = <
202			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
203			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
204			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
205			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
206			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
207			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
208			MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
209			MX53_PAD_EIM_D17__GPIO3_17              0x1e4
210			MX53_PAD_GPIO_3__GPIO1_3                0x1c4
211		>;
212	};
213
214	pinctrl_esdhc2: esdhc2grp {
215		fsl,pins = <
216			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
217			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
218			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
219			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
220			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
221			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
222			MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
223			MX53_PAD_EIM_D20__GPIO3_20              0x1e4
224			MX53_PAD_GPIO_8__GPIO1_8                0x1c4
225		>;
226	};
227
228	pinctrl_fec: fecgrp {
229		fsl,pins = <
230			MX53_PAD_FEC_MDC__FEC_MDC		0x4
231			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
232			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
233			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
234			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
235			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
236			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
237			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
238			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
239			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
240		>;
241	};
242
243	pinctrl_i2c2: i2c2grp {
244		fsl,pins = <
245			MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
246			MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
247		>;
248	};
249
250	pinctrl_ipu_disp0: ipudisp0grp {
251		fsl,pins = <
252			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
253			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
254			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
255			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
256			MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
257			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
258			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
259			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
260			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
261			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
262			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
263			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
264			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
265			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
266			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
267			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
268			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
269			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
270			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
271			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
272			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
273			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
274			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
275			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
276			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
277			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
278			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
279			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
280			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
281		>;
282	};
283
284	pinctrl_uart2: uart2grp {
285		fsl,pins = <
286			MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
287			MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
288			MX53_PAD_EIM_D28__UART2_RTS 0x1e4
289			MX53_PAD_EIM_D29__UART2_CTS 0x1e4
290		>;
291	};
292};
293