1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
4 */
5
6/dts-v1/;
7
8#include "bcm47081.dtsi"
9
10/ {
11	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
12	model = "TP-LINK Archer C5 V2";
13
14	chosen {
15		bootargs = "earlycon";
16	};
17
18	memory@0 {
19		device_type = "memory";
20		reg = <0x00000000 0x08000000>;
21	};
22
23	leds {
24		compatible = "gpio-leds";
25
26		2ghz {
27			label = "bcm53xx:green:2ghz";
28			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
29		};
30
31		lan {
32			label = "bcm53xx:green:lan";
33			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
34		};
35
36		usb2-port1 {
37			label = "bcm53xx:green:usb2-port1";
38			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
39			trigger-sources = <&ohci_port1>, <&ehci_port1>;
40			linux,default-trigger = "usbport";
41		};
42
43		power {
44			label = "bcm53xx:green:power";
45			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
46			linux,default-trigger = "default-on";
47		};
48
49		wan-green {
50			label = "bcm53xx:green:wan";
51			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
52		};
53
54		wps {
55			label = "bcm53xx:green:wps";
56			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
57		};
58
59		wan-amber {
60			label = "bcm53xx:amber:wan";
61			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
62		};
63
64		5ghz {
65			label = "bcm53xx:green:5ghz";
66			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
67		};
68
69		usb2-port2 {
70			label = "bcm53xx:green:usb2-port2";
71			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
72			trigger-sources = <&ohci_port2>, <&ehci_port2>;
73			linux,default-trigger = "usbport";
74		};
75	};
76
77	gpio-keys {
78		compatible = "gpio-keys";
79
80		rfkill {
81			label = "WiFi";
82			linux,code = <KEY_RFKILL>;
83			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
84		};
85
86		restart {
87			label = "Reset";
88			linux,code = <KEY_RESTART>;
89			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
90		};
91	};
92};
93
94&spi_nor {
95	status = "okay";
96
97	partitions {
98		compatible = "fixed-partitions";
99		#address-cells = <1>;
100		#size-cells = <1>;
101
102		boot@0 {
103			label = "boot";
104			reg = <0x000000 0x040000>;
105			read-only;
106		};
107
108		os-image@100000 {
109			label = "os-image";
110			reg = <0x040000 0x200000>;
111			compatible = "brcm,trx";
112		};
113
114		rootfs@240000 {
115			label = "rootfs";
116			reg = <0x240000 0xc00000>;
117		};
118
119		nvram@ff0000 {
120			label = "nvram";
121			reg = <0xff0000 0x010000>;
122		};
123	};
124};
125
126&usb2 {
127	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
128};
129
130&usb3_phy {
131	status = "okay";
132};
133