1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
4 *
5 *  Copyright (C) 2015 Russell King
6 */
7
8/dts-v1/;
9#include "armada-388-clearfog.dtsi"
10
11/ {
12	model = "SolidRun Clearfog Base A1";
13	compatible = "solidrun,clearfog-base-a1",
14		"solidrun,clearfog-a1", "marvell,armada388",
15		"marvell,armada385", "marvell,armada380";
16
17	gpio-keys {
18		compatible = "gpio-keys";
19		pinctrl-0 = <&rear_button_pins>;
20		pinctrl-names = "default";
21
22		button_0 {
23			/* The rear SW3 button */
24			label = "Rear Button";
25			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
26			linux,can-disable;
27			linux,code = <BTN_0>;
28		};
29	};
30};
31
32&eth1 {
33	phy = <&phy1>;
34};
35
36&gpio0 {
37	phy1_reset {
38		gpio-hog;
39		gpios = <19 GPIO_ACTIVE_LOW>;
40		output-low;
41		line-name = "phy1-reset";
42	};
43};
44
45&mdio {
46	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
47	phy1: ethernet-phy@1 {
48		/*
49		 * Annoyingly, the marvell phy driver configures the LED
50		 * register, rather than preserving reset-loaded setting.
51		 * We undo that rubbish here.
52		 */
53		marvell,reg-init = <3 16 0 0x101e>;
54		reg = <1>;
55	};
56};
57
58&pinctrl {
59	/* phy1 reset */
60	clearfog_phy_pins: clearfog-phy-pins {
61		marvell,pins = "mpp19";
62		marvell,function = "gpio";
63	};
64	rear_button_pins: rear-button-pins {
65		marvell,pins = "mpp44";
66		marvell,function = "gpio";
67	};
68};
69