1* Toradex Colibri VF50 Touchscreen driver
2
3Required Properties:
4- compatible must be toradex,vf50-touchscreen
5- io-channels: adc channels being used by the Colibri VF50 module
6- xp-gpios: FET gate driver for input of X+
7- xm-gpios: FET gate driver for input of X-
8- yp-gpios: FET gate driver for input of Y+
9- ym-gpios: FET gate driver for input of Y-
10- interrupts: pen irq interrupt for touch detection
11- pinctrl-names: "idle", "default", "gpios"
12- pinctrl-0: pinctrl node for pen/touch detection state pinmux
13- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
14- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
15- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
16
17Example:
18
19	touchctrl: vf50_touchctrl {
20		compatible = "toradex,vf50-touchscreen";
21		io-channels = <&adc1 0>,<&adc0 0>,
22				<&adc0 1>,<&adc1 2>;
23		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
24		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
25		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
26		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
27		interrupt-parent = <&gpio0>;
28		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
29		pinctrl-names = "idle","default","gpios";
30		pinctrl-0 = <&pinctrl_touchctrl_idle>;
31		pinctrl-1 = <&pinctrl_touchctrl_default>;
32		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
33		vf50-ts-min-pressure = <200>;
34	};
35