1UniPhier I2C controller (FIFO-less)
2
3Required properties:
4- compatible: should be "socionext,uniphier-i2c".
5- #address-cells: should be 1.
6- #size-cells: should be 0.
7- reg: offset and length of the register set for the device.
8- interrupts: a single interrupt specifier.
9- clocks: phandle to the input clock.
10
11Optional properties:
12- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
13  value is 400000.  Defaults to 100000 if not specified.
14
15Examples:
16
17	i2c0: i2c@58400000 {
18		compatible = "socionext,uniphier-i2c";
19		reg = <0x58400000 0x40>;
20		#address-cells = <1>;
21		#size-cells = <0>;
22		interrupts = <0 41 1>;
23		clocks = <&i2c_clk>;
24		clock-frequency = <100000>;
25	};
26