1Sharp 15" LQ150X1LG11 XGA TFT LCD panel
2
3Required properties:
4- compatible: should be "sharp,lq150x1lg11"
5- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
6
7Optional properties:
8- backlight: phandle of the backlight device
9- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
10- sellvds-gpios: a single GPIO for the SELLVDS pin.
11
12If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
13pins are assumed to be handled appropriately by the hardware.
14
15Example:
16
17	backlight: backlight {
18		compatible = "pwm-backlight";
19		pwms = <&pwm 0 100000>;                      /* VBR */
20
21		brightness-levels = <0 20 40 60 80 100>;
22		default-brightness-level = <2>;
23
24		power-supply = <&vdd_12v_reg>;               /* VDD */
25		enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;  /* XSTABY */
26	};
27
28	panel {
29		compatible = "sharp,lq150x1lg11";
30
31		power-supply = <&vcc_3v3_reg>;               /* VCC */
32
33		backlight = <&backlight>;
34		rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
35		sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
36	};
37