1Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
2
3Required properties:
4- compatible: should be "koe,tx14d24vm1bpa"
5- backlight: phandle of the backlight device attached to the panel
6- power-supply: single regulator to provide the supply voltage
7
8Required nodes:
9- port: Parallel port mapping to connect this display
10
11This panel needs single power supply voltage. Its backlight is conntrolled
12via PWM signal.
13
14Example:
15--------
16
17Example device-tree definition when connected to iMX53 based board
18
19	lcd_panel: lcd-panel {
20		compatible = "koe,tx14d24vm1bpa";
21		backlight = <&backlight_lcd>;
22		power-supply = <&reg_3v3>;
23
24		port {
25			lcd_panel_in: endpoint {
26				remote-endpoint = <&lcd_display_out>;
27			};
28		};
29	};
30
31Then one needs to extend the dispX node:
32
33	lcd_display: disp1 {
34
35		port@1 {
36			reg = <1>;
37
38			lcd_display_out: endpoint {
39				remote-endpoint = <&lcd_panel_in>;
40			};
41		};
42	};
43