1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for Allwinner sun4i Pulse Width Modulation Controller
4 *
5 * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
6 *
7 * Limitations:
8 * - When outputing the source clock directly, the PWM logic will be bypassed
9 * and the currently running period is not guaranteed to be completed
10 */
11
12 #include <linux/bitops.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/err.h>
16 #include <linux/io.h>
17 #include <linux/jiffies.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/of_device.h>
21 #include <linux/platform_device.h>
22 #include <linux/pwm.h>
23 #include <linux/reset.h>
24 #include <linux/slab.h>
25 #include <linux/spinlock.h>
26 #include <linux/time.h>
27
28 #define PWM_CTRL_REG 0x0
29
30 #define PWM_CH_PRD_BASE 0x4
31 #define PWM_CH_PRD_OFFSET 0x4
32 #define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch))
33
34 #define PWMCH_OFFSET 15
35 #define PWM_PRESCAL_MASK GENMASK(3, 0)
36 #define PWM_PRESCAL_OFF 0
37 #define PWM_EN BIT(4)
38 #define PWM_ACT_STATE BIT(5)
39 #define PWM_CLK_GATING BIT(6)
40 #define PWM_MODE BIT(7)
41 #define PWM_PULSE BIT(8)
42 #define PWM_BYPASS BIT(9)
43
44 #define PWM_RDY_BASE 28
45 #define PWM_RDY_OFFSET 1
46 #define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch))
47
48 #define PWM_PRD(prd) (((prd) - 1) << 16)
49 #define PWM_PRD_MASK GENMASK(15, 0)
50
51 #define PWM_DTY_MASK GENMASK(15, 0)
52
53 #define PWM_REG_PRD(reg) ((((reg) >> 16) & PWM_PRD_MASK) + 1)
54 #define PWM_REG_DTY(reg) ((reg) & PWM_DTY_MASK)
55 #define PWM_REG_PRESCAL(reg, chan) (((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK)
56
57 #define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET))
58
59 static const u32 prescaler_table[] = {
60 120,
61 180,
62 240,
63 360,
64 480,
65 0,
66 0,
67 0,
68 12000,
69 24000,
70 36000,
71 48000,
72 72000,
73 0,
74 0,
75 0, /* Actually 1 but tested separately */
76 };
77
78 struct sun4i_pwm_data {
79 bool has_prescaler_bypass;
80 bool has_direct_mod_clk_output;
81 unsigned int npwm;
82 };
83
84 struct sun4i_pwm_chip {
85 struct pwm_chip chip;
86 struct clk *bus_clk;
87 struct clk *clk;
88 struct reset_control *rst;
89 void __iomem *base;
90 spinlock_t ctrl_lock;
91 const struct sun4i_pwm_data *data;
92 unsigned long next_period[2];
93 };
94
to_sun4i_pwm_chip(struct pwm_chip * chip)95 static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
96 {
97 return container_of(chip, struct sun4i_pwm_chip, chip);
98 }
99
sun4i_pwm_readl(struct sun4i_pwm_chip * chip,unsigned long offset)100 static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
101 unsigned long offset)
102 {
103 return readl(chip->base + offset);
104 }
105
sun4i_pwm_writel(struct sun4i_pwm_chip * chip,u32 val,unsigned long offset)106 static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
107 u32 val, unsigned long offset)
108 {
109 writel(val, chip->base + offset);
110 }
111
sun4i_pwm_get_state(struct pwm_chip * chip,struct pwm_device * pwm,struct pwm_state * state)112 static void sun4i_pwm_get_state(struct pwm_chip *chip,
113 struct pwm_device *pwm,
114 struct pwm_state *state)
115 {
116 struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
117 u64 clk_rate, tmp;
118 u32 val;
119 unsigned int prescaler;
120
121 clk_rate = clk_get_rate(sun4i_pwm->clk);
122
123 val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
124
125 /*
126 * PWM chapter in H6 manual has a diagram which explains that if bypass
127 * bit is set, no other setting has any meaning. Even more, experiment
128 * proved that also enable bit is ignored in this case.
129 */
130 if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
131 sun4i_pwm->data->has_direct_mod_clk_output) {
132 state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
133 state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
134 state->polarity = PWM_POLARITY_NORMAL;
135 state->enabled = true;
136 return;
137 }
138
139 if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
140 sun4i_pwm->data->has_prescaler_bypass)
141 prescaler = 1;
142 else
143 prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)];
144
145 if (prescaler == 0)
146 return;
147
148 if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm))
149 state->polarity = PWM_POLARITY_NORMAL;
150 else
151 state->polarity = PWM_POLARITY_INVERSED;
152
153 if ((val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) ==
154 BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm))
155 state->enabled = true;
156 else
157 state->enabled = false;
158
159 val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
160
161 tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
162 state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
163
164 tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
165 state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
166 }
167
sun4i_pwm_calculate(struct sun4i_pwm_chip * sun4i_pwm,const struct pwm_state * state,u32 * dty,u32 * prd,unsigned int * prsclr,bool * bypass)168 static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
169 const struct pwm_state *state,
170 u32 *dty, u32 *prd, unsigned int *prsclr,
171 bool *bypass)
172 {
173 u64 clk_rate, div = 0;
174 unsigned int prescaler = 0;
175
176 clk_rate = clk_get_rate(sun4i_pwm->clk);
177
178 *bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
179 state->enabled &&
180 (state->period * clk_rate >= NSEC_PER_SEC) &&
181 (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
182 (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
183
184 /* Skip calculation of other parameters if we bypass them */
185 if (*bypass)
186 return 0;
187
188 if (sun4i_pwm->data->has_prescaler_bypass) {
189 /* First, test without any prescaler when available */
190 prescaler = PWM_PRESCAL_MASK;
191 /*
192 * When not using any prescaler, the clock period in nanoseconds
193 * is not an integer so round it half up instead of
194 * truncating to get less surprising values.
195 */
196 div = clk_rate * state->period + NSEC_PER_SEC / 2;
197 do_div(div, NSEC_PER_SEC);
198 if (div - 1 > PWM_PRD_MASK)
199 prescaler = 0;
200 }
201
202 if (prescaler == 0) {
203 /* Go up from the first divider */
204 for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) {
205 unsigned int pval = prescaler_table[prescaler];
206
207 if (!pval)
208 continue;
209
210 div = clk_rate;
211 do_div(div, pval);
212 div = div * state->period;
213 do_div(div, NSEC_PER_SEC);
214 if (div - 1 <= PWM_PRD_MASK)
215 break;
216 }
217
218 if (div - 1 > PWM_PRD_MASK)
219 return -EINVAL;
220 }
221
222 *prd = div;
223 div *= state->duty_cycle;
224 do_div(div, state->period);
225 *dty = div;
226 *prsclr = prescaler;
227
228 return 0;
229 }
230
sun4i_pwm_apply(struct pwm_chip * chip,struct pwm_device * pwm,const struct pwm_state * state)231 static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
232 const struct pwm_state *state)
233 {
234 struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
235 struct pwm_state cstate;
236 u32 ctrl, duty = 0, period = 0, val;
237 int ret;
238 unsigned int delay_us, prescaler = 0;
239 unsigned long now;
240 bool bypass;
241
242 pwm_get_state(pwm, &cstate);
243
244 if (!cstate.enabled) {
245 ret = clk_prepare_enable(sun4i_pwm->clk);
246 if (ret) {
247 dev_err(chip->dev, "failed to enable PWM clock\n");
248 return ret;
249 }
250 }
251
252 ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
253 &bypass);
254 if (ret) {
255 dev_err(chip->dev, "period exceeds the maximum value\n");
256 if (!cstate.enabled)
257 clk_disable_unprepare(sun4i_pwm->clk);
258 return ret;
259 }
260
261 spin_lock(&sun4i_pwm->ctrl_lock);
262 ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
263
264 if (sun4i_pwm->data->has_direct_mod_clk_output) {
265 if (bypass) {
266 ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
267 /* We can skip other parameter */
268 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
269 spin_unlock(&sun4i_pwm->ctrl_lock);
270 return 0;
271 }
272
273 ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
274 }
275
276 if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
277 /* Prescaler changed, the clock has to be gated */
278 ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
279 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
280
281 ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
282 ctrl |= BIT_CH(prescaler, pwm->hwpwm);
283 }
284
285 val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
286 sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
287 sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
288 nsecs_to_jiffies(cstate.period + 1000);
289
290 if (state->polarity != PWM_POLARITY_NORMAL)
291 ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
292 else
293 ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
294
295 ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
296
297 if (state->enabled)
298 ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
299
300 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
301
302 spin_unlock(&sun4i_pwm->ctrl_lock);
303
304 if (state->enabled)
305 return 0;
306
307 /* We need a full period to elapse before disabling the channel. */
308 now = jiffies;
309 if (time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
310 delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] -
311 now);
312 if ((delay_us / 500) > MAX_UDELAY_MS)
313 msleep(delay_us / 1000 + 1);
314 else
315 usleep_range(delay_us, delay_us * 2);
316 }
317
318 spin_lock(&sun4i_pwm->ctrl_lock);
319 ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
320 ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
321 ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
322 sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
323 spin_unlock(&sun4i_pwm->ctrl_lock);
324
325 clk_disable_unprepare(sun4i_pwm->clk);
326
327 return 0;
328 }
329
330 static const struct pwm_ops sun4i_pwm_ops = {
331 .apply = sun4i_pwm_apply,
332 .get_state = sun4i_pwm_get_state,
333 .owner = THIS_MODULE,
334 };
335
336 static const struct sun4i_pwm_data sun4i_pwm_dual_nobypass = {
337 .has_prescaler_bypass = false,
338 .npwm = 2,
339 };
340
341 static const struct sun4i_pwm_data sun4i_pwm_dual_bypass = {
342 .has_prescaler_bypass = true,
343 .npwm = 2,
344 };
345
346 static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
347 .has_prescaler_bypass = true,
348 .npwm = 1,
349 };
350
351 static const struct sun4i_pwm_data sun50i_a64_pwm_data = {
352 .has_prescaler_bypass = true,
353 .has_direct_mod_clk_output = true,
354 .npwm = 1,
355 };
356
357 static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
358 .has_prescaler_bypass = true,
359 .has_direct_mod_clk_output = true,
360 .npwm = 2,
361 };
362
363 static const struct of_device_id sun4i_pwm_dt_ids[] = {
364 {
365 .compatible = "allwinner,sun4i-a10-pwm",
366 .data = &sun4i_pwm_dual_nobypass,
367 }, {
368 .compatible = "allwinner,sun5i-a10s-pwm",
369 .data = &sun4i_pwm_dual_bypass,
370 }, {
371 .compatible = "allwinner,sun5i-a13-pwm",
372 .data = &sun4i_pwm_single_bypass,
373 }, {
374 .compatible = "allwinner,sun7i-a20-pwm",
375 .data = &sun4i_pwm_dual_bypass,
376 }, {
377 .compatible = "allwinner,sun8i-h3-pwm",
378 .data = &sun4i_pwm_single_bypass,
379 }, {
380 .compatible = "allwinner,sun50i-a64-pwm",
381 .data = &sun50i_a64_pwm_data,
382 }, {
383 .compatible = "allwinner,sun50i-h6-pwm",
384 .data = &sun50i_h6_pwm_data,
385 }, {
386 /* sentinel */
387 },
388 };
389 MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids);
390
sun4i_pwm_probe(struct platform_device * pdev)391 static int sun4i_pwm_probe(struct platform_device *pdev)
392 {
393 struct sun4i_pwm_chip *pwm;
394 int ret;
395
396 pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
397 if (!pwm)
398 return -ENOMEM;
399
400 pwm->data = of_device_get_match_data(&pdev->dev);
401 if (!pwm->data)
402 return -ENODEV;
403
404 pwm->base = devm_platform_ioremap_resource(pdev, 0);
405 if (IS_ERR(pwm->base))
406 return PTR_ERR(pwm->base);
407
408 /*
409 * All hardware variants need a source clock that is divided and
410 * then feeds the counter that defines the output wave form. In the
411 * device tree this clock is either unnamed or called "mod".
412 * Some variants (e.g. H6) need another clock to access the
413 * hardware registers; this is called "bus".
414 * So we request "mod" first (and ignore the corner case that a
415 * parent provides a "mod" clock while the right one would be the
416 * unnamed one of the PWM device) and if this is not found we fall
417 * back to the first clock of the PWM.
418 */
419 pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
420 if (IS_ERR(pwm->clk))
421 return dev_err_probe(&pdev->dev, PTR_ERR(pwm->clk),
422 "get mod clock failed\n");
423
424 if (!pwm->clk) {
425 pwm->clk = devm_clk_get(&pdev->dev, NULL);
426 if (IS_ERR(pwm->clk))
427 return dev_err_probe(&pdev->dev, PTR_ERR(pwm->clk),
428 "get unnamed clock failed\n");
429 }
430
431 pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
432 if (IS_ERR(pwm->bus_clk))
433 return dev_err_probe(&pdev->dev, PTR_ERR(pwm->bus_clk),
434 "get bus clock failed\n");
435
436 pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
437 if (IS_ERR(pwm->rst))
438 return dev_err_probe(&pdev->dev, PTR_ERR(pwm->rst),
439 "get reset failed\n");
440
441 /* Deassert reset */
442 ret = reset_control_deassert(pwm->rst);
443 if (ret) {
444 dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
445 ERR_PTR(ret));
446 return ret;
447 }
448
449 /*
450 * We're keeping the bus clock on for the sake of simplicity.
451 * Actually it only needs to be on for hardware register accesses.
452 */
453 ret = clk_prepare_enable(pwm->bus_clk);
454 if (ret) {
455 dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
456 ERR_PTR(ret));
457 goto err_bus;
458 }
459
460 pwm->chip.dev = &pdev->dev;
461 pwm->chip.ops = &sun4i_pwm_ops;
462 pwm->chip.npwm = pwm->data->npwm;
463
464 spin_lock_init(&pwm->ctrl_lock);
465
466 ret = pwmchip_add(&pwm->chip);
467 if (ret < 0) {
468 dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
469 goto err_pwm_add;
470 }
471
472 platform_set_drvdata(pdev, pwm);
473
474 return 0;
475
476 err_pwm_add:
477 clk_disable_unprepare(pwm->bus_clk);
478 err_bus:
479 reset_control_assert(pwm->rst);
480
481 return ret;
482 }
483
sun4i_pwm_remove(struct platform_device * pdev)484 static int sun4i_pwm_remove(struct platform_device *pdev)
485 {
486 struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
487
488 pwmchip_remove(&pwm->chip);
489
490 clk_disable_unprepare(pwm->bus_clk);
491 reset_control_assert(pwm->rst);
492
493 return 0;
494 }
495
496 static struct platform_driver sun4i_pwm_driver = {
497 .driver = {
498 .name = "sun4i-pwm",
499 .of_match_table = sun4i_pwm_dt_ids,
500 },
501 .probe = sun4i_pwm_probe,
502 .remove = sun4i_pwm_remove,
503 };
504 module_platform_driver(sun4i_pwm_driver);
505
506 MODULE_ALIAS("platform:sun4i-pwm");
507 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
508 MODULE_DESCRIPTION("Allwinner sun4i PWM driver");
509 MODULE_LICENSE("GPL v2");
510
