1 /*
2  * tps80031.c -- TI TPS80031/TPS80032 mfd core driver.
3  *
4  * MFD core driver for TI TPS80031/TPS80032 Fully Integrated
5  * Power Management with Power Path and Battery Charger
6  *
7  * Copyright (c) 2012, NVIDIA Corporation.
8  *
9  * Author: Laxman Dewangan <ldewangan@nvidia.com>
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation version 2.
14  *
15  * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
16  * whether express or implied; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
23  * 02111-1307, USA
24  */
25 
26 #include <linux/err.h>
27 #include <linux/i2c.h>
28 #include <linux/init.h>
29 #include <linux/interrupt.h>
30 #include <linux/irq.h>
31 #include <linux/mfd/core.h>
32 #include <linux/mfd/tps80031.h>
33 #include <linux/pm.h>
34 #include <linux/regmap.h>
35 #include <linux/slab.h>
36 
37 static const struct resource tps80031_rtc_resources[] = {
38 	DEFINE_RES_IRQ(TPS80031_INT_RTC_ALARM),
39 };
40 
41 /* TPS80031 sub mfd devices */
42 static const struct mfd_cell tps80031_cell[] = {
43 	{
44 		.name = "tps80031-pmic",
45 	},
46 	{
47 		.name = "tps80031-clock",
48 	},
49 	{
50 		.name = "tps80031-rtc",
51 		.num_resources = ARRAY_SIZE(tps80031_rtc_resources),
52 		.resources = tps80031_rtc_resources,
53 	},
54 	{
55 		.name = "tps80031-gpadc",
56 	},
57 	{
58 		.name = "tps80031-fuel-gauge",
59 	},
60 	{
61 		.name = "tps80031-charger",
62 	},
63 };
64 
65 static int tps80031_slave_address[TPS80031_NUM_SLAVES] = {
66 	TPS80031_I2C_ID0_ADDR,
67 	TPS80031_I2C_ID1_ADDR,
68 	TPS80031_I2C_ID2_ADDR,
69 	TPS80031_I2C_ID3_ADDR,
70 };
71 
72 struct tps80031_pupd_data {
73 	u8	reg;
74 	u8	pullup_bit;
75 	u8	pulldown_bit;
76 };
77 
78 #define TPS80031_IRQ(_reg, _mask)			\
79 	{							\
80 		.reg_offset = (TPS80031_INT_MSK_LINE_##_reg) -	\
81 				TPS80031_INT_MSK_LINE_A,	\
82 		.mask = BIT(_mask),				\
83 	}
84 
85 static const struct regmap_irq tps80031_main_irqs[] = {
86 	[TPS80031_INT_PWRON]		= TPS80031_IRQ(A, 0),
87 	[TPS80031_INT_RPWRON]		= TPS80031_IRQ(A, 1),
88 	[TPS80031_INT_SYS_VLOW]		= TPS80031_IRQ(A, 2),
89 	[TPS80031_INT_RTC_ALARM]	= TPS80031_IRQ(A, 3),
90 	[TPS80031_INT_RTC_PERIOD]	= TPS80031_IRQ(A, 4),
91 	[TPS80031_INT_HOT_DIE]		= TPS80031_IRQ(A, 5),
92 	[TPS80031_INT_VXX_SHORT]	= TPS80031_IRQ(A, 6),
93 	[TPS80031_INT_SPDURATION]	= TPS80031_IRQ(A, 7),
94 	[TPS80031_INT_WATCHDOG]		= TPS80031_IRQ(B, 0),
95 	[TPS80031_INT_BAT]		= TPS80031_IRQ(B, 1),
96 	[TPS80031_INT_SIM]		= TPS80031_IRQ(B, 2),
97 	[TPS80031_INT_MMC]		= TPS80031_IRQ(B, 3),
98 	[TPS80031_INT_RES]		= TPS80031_IRQ(B, 4),
99 	[TPS80031_INT_GPADC_RT]		= TPS80031_IRQ(B, 5),
100 	[TPS80031_INT_GPADC_SW2_EOC]	= TPS80031_IRQ(B, 6),
101 	[TPS80031_INT_CC_AUTOCAL]	= TPS80031_IRQ(B, 7),
102 	[TPS80031_INT_ID_WKUP]		= TPS80031_IRQ(C, 0),
103 	[TPS80031_INT_VBUSS_WKUP]	= TPS80031_IRQ(C, 1),
104 	[TPS80031_INT_ID]		= TPS80031_IRQ(C, 2),
105 	[TPS80031_INT_VBUS]		= TPS80031_IRQ(C, 3),
106 	[TPS80031_INT_CHRG_CTRL]	= TPS80031_IRQ(C, 4),
107 	[TPS80031_INT_EXT_CHRG]		= TPS80031_IRQ(C, 5),
108 	[TPS80031_INT_INT_CHRG]		= TPS80031_IRQ(C, 6),
109 	[TPS80031_INT_RES2]		= TPS80031_IRQ(C, 7),
110 };
111 
112 static struct regmap_irq_chip tps80031_irq_chip = {
113 	.name = "tps80031",
114 	.irqs = tps80031_main_irqs,
115 	.num_irqs = ARRAY_SIZE(tps80031_main_irqs),
116 	.num_regs = 3,
117 	.status_base = TPS80031_INT_STS_A,
118 	.mask_base = TPS80031_INT_MSK_LINE_A,
119 };
120 
121 #define PUPD_DATA(_reg, _pulldown_bit, _pullup_bit)	\
122 	{						\
123 		.reg = TPS80031_CFG_INPUT_PUPD##_reg,	\
124 		.pulldown_bit = _pulldown_bit,		\
125 		.pullup_bit = _pullup_bit,		\
126 	}
127 
128 static const struct tps80031_pupd_data tps80031_pupds[] = {
129 	[TPS80031_PREQ1]		= PUPD_DATA(1, BIT(0),	BIT(1)),
130 	[TPS80031_PREQ2A]		= PUPD_DATA(1, BIT(2),	BIT(3)),
131 	[TPS80031_PREQ2B]		= PUPD_DATA(1, BIT(4),	BIT(5)),
132 	[TPS80031_PREQ2C]		= PUPD_DATA(1, BIT(6),	BIT(7)),
133 	[TPS80031_PREQ3]		= PUPD_DATA(2, BIT(0),	BIT(1)),
134 	[TPS80031_NRES_WARM]		= PUPD_DATA(2, 0,	BIT(2)),
135 	[TPS80031_PWM_FORCE]		= PUPD_DATA(2, BIT(5),	0),
136 	[TPS80031_CHRG_EXT_CHRG_STATZ]	= PUPD_DATA(2, 0,	BIT(6)),
137 	[TPS80031_SIM]			= PUPD_DATA(3, BIT(0),	BIT(1)),
138 	[TPS80031_MMC]			= PUPD_DATA(3, BIT(2),	BIT(3)),
139 	[TPS80031_GPADC_START]		= PUPD_DATA(3, BIT(4),	0),
140 	[TPS80031_DVSI2C_SCL]		= PUPD_DATA(4, 0,	BIT(0)),
141 	[TPS80031_DVSI2C_SDA]		= PUPD_DATA(4, 0,	BIT(1)),
142 	[TPS80031_CTLI2C_SCL]		= PUPD_DATA(4, 0,	BIT(2)),
143 	[TPS80031_CTLI2C_SDA]		= PUPD_DATA(4, 0,	BIT(3)),
144 };
145 static struct tps80031 *tps80031_power_off_dev;
146 
tps80031_ext_power_req_config(struct device * dev,unsigned long ext_ctrl_flag,int preq_bit,int state_reg_add,int trans_reg_add)147 int tps80031_ext_power_req_config(struct device *dev,
148 		unsigned long ext_ctrl_flag, int preq_bit,
149 		int state_reg_add, int trans_reg_add)
150 {
151 	u8 res_ass_reg = 0;
152 	int preq_mask_bit = 0;
153 	int ret;
154 
155 	if (!(ext_ctrl_flag & TPS80031_EXT_PWR_REQ))
156 		return 0;
157 
158 	if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ1) {
159 		res_ass_reg = TPS80031_PREQ1_RES_ASS_A + (preq_bit >> 3);
160 		preq_mask_bit = 5;
161 	} else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ2) {
162 		res_ass_reg = TPS80031_PREQ2_RES_ASS_A + (preq_bit >> 3);
163 		preq_mask_bit = 6;
164 	} else if (ext_ctrl_flag & TPS80031_PWR_REQ_INPUT_PREQ3) {
165 		res_ass_reg = TPS80031_PREQ3_RES_ASS_A + (preq_bit >> 3);
166 		preq_mask_bit = 7;
167 	}
168 
169 	/* Configure REQ_ASS registers */
170 	ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1, res_ass_reg,
171 					BIT(preq_bit & 0x7));
172 	if (ret < 0) {
173 		dev_err(dev, "reg 0x%02x setbit failed, err = %d\n",
174 				res_ass_reg, ret);
175 		return ret;
176 	}
177 
178 	/* Unmask the PREQ */
179 	ret = tps80031_clr_bits(dev, TPS80031_SLAVE_ID1,
180 			TPS80031_PHOENIX_MSK_TRANSITION, BIT(preq_mask_bit));
181 	if (ret < 0) {
182 		dev_err(dev, "reg 0x%02x clrbit failed, err = %d\n",
183 			TPS80031_PHOENIX_MSK_TRANSITION, ret);
184 		return ret;
185 	}
186 
187 	/* Switch regulator control to resource now */
188 	if (ext_ctrl_flag & (TPS80031_PWR_REQ_INPUT_PREQ2 |
189 					TPS80031_PWR_REQ_INPUT_PREQ3)) {
190 		ret = tps80031_update(dev, TPS80031_SLAVE_ID1, state_reg_add,
191 						0x0, TPS80031_STATE_MASK);
192 		if (ret < 0)
193 			dev_err(dev, "reg 0x%02x update failed, err = %d\n",
194 				state_reg_add, ret);
195 	} else {
196 		ret = tps80031_update(dev, TPS80031_SLAVE_ID1, trans_reg_add,
197 				TPS80031_TRANS_SLEEP_OFF,
198 				TPS80031_TRANS_SLEEP_MASK);
199 		if (ret < 0)
200 			dev_err(dev, "reg 0x%02x update failed, err = %d\n",
201 				trans_reg_add, ret);
202 	}
203 	return ret;
204 }
205 EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config);
206 
tps80031_power_off(void)207 static void tps80031_power_off(void)
208 {
209 	dev_info(tps80031_power_off_dev->dev, "switching off PMU\n");
210 	tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1,
211 				TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
212 }
213 
tps80031_pupd_init(struct tps80031 * tps80031,struct tps80031_platform_data * pdata)214 static void tps80031_pupd_init(struct tps80031 *tps80031,
215 			       struct tps80031_platform_data *pdata)
216 {
217 	struct tps80031_pupd_init_data *pupd_init_data = pdata->pupd_init_data;
218 	int data_size = pdata->pupd_init_data_size;
219 	int i;
220 
221 	for (i = 0; i < data_size; ++i) {
222 		struct tps80031_pupd_init_data *pupd_init = &pupd_init_data[i];
223 		const struct tps80031_pupd_data *pupd =
224 			&tps80031_pupds[pupd_init->input_pin];
225 		u8 update_value = 0;
226 		u8 update_mask = pupd->pulldown_bit | pupd->pullup_bit;
227 
228 		if (pupd_init->setting == TPS80031_PUPD_PULLDOWN)
229 			update_value = pupd->pulldown_bit;
230 		else if (pupd_init->setting == TPS80031_PUPD_PULLUP)
231 			update_value = pupd->pullup_bit;
232 
233 		tps80031_update(tps80031->dev, TPS80031_SLAVE_ID1, pupd->reg,
234 				update_value, update_mask);
235 	}
236 }
237 
tps80031_init_ext_control(struct tps80031 * tps80031,struct tps80031_platform_data * pdata)238 static int tps80031_init_ext_control(struct tps80031 *tps80031,
239 			struct tps80031_platform_data *pdata)
240 {
241 	struct device *dev = tps80031->dev;
242 	int ret;
243 	int i;
244 
245 	/* Clear all external control for this rail */
246 	for (i = 0; i < 9; ++i) {
247 		ret = tps80031_write(dev, TPS80031_SLAVE_ID1,
248 				TPS80031_PREQ1_RES_ASS_A + i, 0);
249 		if (ret < 0) {
250 			dev_err(dev, "reg 0x%02x write failed, err = %d\n",
251 				TPS80031_PREQ1_RES_ASS_A + i, ret);
252 			return ret;
253 		}
254 	}
255 
256 	/* Mask the PREQ */
257 	ret = tps80031_set_bits(dev, TPS80031_SLAVE_ID1,
258 			TPS80031_PHOENIX_MSK_TRANSITION, 0x7 << 5);
259 	if (ret < 0) {
260 		dev_err(dev, "reg 0x%02x set_bits failed, err = %d\n",
261 			TPS80031_PHOENIX_MSK_TRANSITION, ret);
262 		return ret;
263 	}
264 	return ret;
265 }
266 
tps80031_irq_init(struct tps80031 * tps80031,int irq,int irq_base)267 static int tps80031_irq_init(struct tps80031 *tps80031, int irq, int irq_base)
268 {
269 	struct device *dev = tps80031->dev;
270 	int i, ret;
271 
272 	/*
273 	 * The MASK register used for updating status register when
274 	 * interrupt occurs and LINE register used to pass the status
275 	 * to actual interrupt line.  As per datasheet:
276 	 * When INT_MSK_LINE [i] is set to 1, the associated interrupt
277 	 * number i is INT line masked, which means that no interrupt is
278 	 * generated on the INT line.
279 	 * When INT_MSK_LINE [i] is set to 0, the associated interrupt
280 	 * number i is  line enabled: An interrupt is generated on the
281 	 * INT line.
282 	 * In any case, the INT_STS [i] status bit may or may not be updated,
283 	 * only linked to the INT_MSK_STS [i] configuration register bit.
284 	 *
285 	 * When INT_MSK_STS [i] is set to 1, the associated interrupt number
286 	 * i is status masked, which means that no interrupt is stored in
287 	 * the INT_STS[i] status bit. Note that no interrupt number i is
288 	 * generated on the INT line, even if the INT_MSK_LINE [i] register
289 	 * bit is set to 0.
290 	 * When INT_MSK_STS [i] is set to 0, the associated interrupt number i
291 	 * is status enabled: An interrupt status is updated in the INT_STS [i]
292 	 * register. The interrupt may or may not be generated on the INT line,
293 	 * depending on the INT_MSK_LINE [i] configuration register bit.
294 	 */
295 	for (i = 0; i < 3; i++)
296 		tps80031_write(dev, TPS80031_SLAVE_ID2,
297 				TPS80031_INT_MSK_STS_A + i, 0x00);
298 
299 	ret = regmap_add_irq_chip(tps80031->regmap[TPS80031_SLAVE_ID2], irq,
300 			IRQF_ONESHOT, irq_base,
301 			&tps80031_irq_chip, &tps80031->irq_data);
302 	if (ret < 0) {
303 		dev_err(dev, "add irq failed, err = %d\n", ret);
304 		return ret;
305 	}
306 	return ret;
307 }
308 
rd_wr_reg_id0(struct device * dev,unsigned int reg)309 static bool rd_wr_reg_id0(struct device *dev, unsigned int reg)
310 {
311 	switch (reg) {
312 	case TPS80031_SMPS1_CFG_FORCE ... TPS80031_SMPS2_CFG_VOLTAGE:
313 		return true;
314 	default:
315 		return false;
316 	}
317 }
318 
rd_wr_reg_id1(struct device * dev,unsigned int reg)319 static bool rd_wr_reg_id1(struct device *dev, unsigned int reg)
320 {
321 	switch (reg) {
322 	case TPS80031_SECONDS_REG ... TPS80031_RTC_RESET_STATUS_REG:
323 	case TPS80031_VALIDITY0 ... TPS80031_VALIDITY7:
324 	case TPS80031_PHOENIX_START_CONDITION ... TPS80031_KEY_PRESS_DUR_CFG:
325 	case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
326 	case TPS80031_BROADCAST_ADDR_ALL ... TPS80031_BROADCAST_ADDR_CLK_RST:
327 	case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
328 	case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
329 	case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
330 	case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
331 	case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
332 	case TPS80031_BACKUP_REG:
333 		return true;
334 	default:
335 		return false;
336 	}
337 }
338 
is_volatile_reg_id1(struct device * dev,unsigned int reg)339 static bool is_volatile_reg_id1(struct device *dev, unsigned int reg)
340 {
341 	switch (reg) {
342 	case TPS80031_SMPS4_CFG_TRANS ... TPS80031_SMPS3_CFG_VOLTAGE:
343 	case TPS80031_VANA_CFG_TRANS ... TPS80031_LDO7_CFG_VOLTAGE:
344 	case TPS80031_REGEN1_CFG_TRANS ... TPS80031_TMP_CFG_STATE:
345 	case TPS80031_PREQ1_RES_ASS_A ... TPS80031_PREQ3_RES_ASS_C:
346 	case TPS80031_SMPS_OFFSET ... TPS80031_BATDEBOUNCING:
347 	case TPS80031_CFG_INPUT_PUPD1 ... TPS80031_CFG_SMPS_PD:
348 		return true;
349 	default:
350 		return false;
351 	}
352 }
353 
rd_wr_reg_id2(struct device * dev,unsigned int reg)354 static bool rd_wr_reg_id2(struct device *dev, unsigned int reg)
355 {
356 	switch (reg) {
357 	case TPS80031_USB_VENDOR_ID_LSB ... TPS80031_USB_OTG_REVISION:
358 	case TPS80031_GPADC_CTRL ... TPS80031_CTRL_P1:
359 	case TPS80031_RTCH0_LSB ... TPS80031_GPCH0_MSB:
360 	case TPS80031_TOGGLE1 ... TPS80031_VIBMODE:
361 	case TPS80031_PWM1ON ... TPS80031_PWM2OFF:
362 	case TPS80031_FG_REG_00 ... TPS80031_FG_REG_11:
363 	case TPS80031_INT_STS_A ... TPS80031_INT_MSK_STS_C:
364 	case TPS80031_CONTROLLER_CTRL2 ... TPS80031_LED_PWM_CTRL2:
365 		return true;
366 	default:
367 		return false;
368 	}
369 }
370 
rd_wr_reg_id3(struct device * dev,unsigned int reg)371 static bool rd_wr_reg_id3(struct device *dev, unsigned int reg)
372 {
373 	switch (reg) {
374 	case TPS80031_GPADC_TRIM0 ... TPS80031_GPADC_TRIM18:
375 		return true;
376 	default:
377 		return false;
378 	}
379 }
380 
381 static const struct regmap_config tps80031_regmap_configs[] = {
382 	{
383 		.reg_bits = 8,
384 		.val_bits = 8,
385 		.writeable_reg = rd_wr_reg_id0,
386 		.readable_reg = rd_wr_reg_id0,
387 		.max_register = TPS80031_MAX_REGISTER,
388 	},
389 	{
390 		.reg_bits = 8,
391 		.val_bits = 8,
392 		.writeable_reg = rd_wr_reg_id1,
393 		.readable_reg = rd_wr_reg_id1,
394 		.volatile_reg = is_volatile_reg_id1,
395 		.max_register = TPS80031_MAX_REGISTER,
396 	},
397 	{
398 		.reg_bits = 8,
399 		.val_bits = 8,
400 		.writeable_reg = rd_wr_reg_id2,
401 		.readable_reg = rd_wr_reg_id2,
402 		.max_register = TPS80031_MAX_REGISTER,
403 	},
404 	{
405 		.reg_bits = 8,
406 		.val_bits = 8,
407 		.writeable_reg = rd_wr_reg_id3,
408 		.readable_reg = rd_wr_reg_id3,
409 		.max_register = TPS80031_MAX_REGISTER,
410 	},
411 };
412 
tps80031_probe(struct i2c_client * client,const struct i2c_device_id * id)413 static int tps80031_probe(struct i2c_client *client,
414 			  const struct i2c_device_id *id)
415 {
416 	struct tps80031_platform_data *pdata = dev_get_platdata(&client->dev);
417 	struct tps80031 *tps80031;
418 	int ret;
419 	uint8_t es_version;
420 	uint8_t ep_ver;
421 	int i;
422 
423 	if (!pdata) {
424 		dev_err(&client->dev, "tps80031 requires platform data\n");
425 		return -EINVAL;
426 	}
427 
428 	tps80031 = devm_kzalloc(&client->dev, sizeof(*tps80031), GFP_KERNEL);
429 	if (!tps80031)
430 		return -ENOMEM;
431 
432 	for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
433 		if (tps80031_slave_address[i] == client->addr)
434 			tps80031->clients[i] = client;
435 		else
436 			tps80031->clients[i] = devm_i2c_new_dummy_device(&client->dev,
437 						client->adapter, tps80031_slave_address[i]);
438 		if (IS_ERR(tps80031->clients[i])) {
439 			dev_err(&client->dev, "can't attach client %d\n", i);
440 			return PTR_ERR(tps80031->clients[i]);
441 		}
442 
443 		i2c_set_clientdata(tps80031->clients[i], tps80031);
444 		tps80031->regmap[i] = devm_regmap_init_i2c(tps80031->clients[i],
445 					&tps80031_regmap_configs[i]);
446 		if (IS_ERR(tps80031->regmap[i])) {
447 			ret = PTR_ERR(tps80031->regmap[i]);
448 			dev_err(&client->dev,
449 				"regmap %d init failed, err %d\n", i, ret);
450 			return ret;
451 		}
452 	}
453 
454 	ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
455 			TPS80031_JTAGVERNUM, &es_version);
456 	if (ret < 0) {
457 		dev_err(&client->dev,
458 			"Silicon version number read failed: %d\n", ret);
459 		return ret;
460 	}
461 
462 	ret = tps80031_read(&client->dev, TPS80031_SLAVE_ID3,
463 			TPS80031_EPROM_REV, &ep_ver);
464 	if (ret < 0) {
465 		dev_err(&client->dev,
466 			"Silicon eeprom version read failed: %d\n", ret);
467 		return ret;
468 	}
469 
470 	dev_info(&client->dev, "ES version 0x%02x and EPROM version 0x%02x\n",
471 					es_version, ep_ver);
472 	tps80031->es_version = es_version;
473 	tps80031->dev = &client->dev;
474 	i2c_set_clientdata(client, tps80031);
475 	tps80031->chip_info = id->driver_data;
476 
477 	ret = tps80031_irq_init(tps80031, client->irq, pdata->irq_base);
478 	if (ret) {
479 		dev_err(&client->dev, "IRQ init failed: %d\n", ret);
480 		return ret;
481 	}
482 
483 	tps80031_pupd_init(tps80031, pdata);
484 
485 	tps80031_init_ext_control(tps80031, pdata);
486 
487 	ret = mfd_add_devices(tps80031->dev, -1,
488 			tps80031_cell, ARRAY_SIZE(tps80031_cell),
489 			NULL, 0,
490 			regmap_irq_get_domain(tps80031->irq_data));
491 	if (ret < 0) {
492 		dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
493 		goto fail_mfd_add;
494 	}
495 
496 	if (pdata->use_power_off && !pm_power_off) {
497 		tps80031_power_off_dev = tps80031;
498 		pm_power_off = tps80031_power_off;
499 	}
500 	return 0;
501 
502 fail_mfd_add:
503 	regmap_del_irq_chip(client->irq, tps80031->irq_data);
504 	return ret;
505 }
506 
507 static const struct i2c_device_id tps80031_id_table[] = {
508 	{ "tps80031", TPS80031 },
509 	{ "tps80032", TPS80032 },
510 	{ }
511 };
512 
513 static struct i2c_driver tps80031_driver = {
514 	.driver	= {
515 		.name			= "tps80031",
516 		.suppress_bind_attrs	= true,
517 	},
518 	.probe		= tps80031_probe,
519 	.id_table	= tps80031_id_table,
520 };
521 
tps80031_init(void)522 static int __init tps80031_init(void)
523 {
524 	return i2c_add_driver(&tps80031_driver);
525 }
526 subsys_initcall(tps80031_init);
527