1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
4 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
5 */
6 #include <linux/export.h>
7 #include <linux/module.h>
8 #include <linux/types.h>
9 #include <linux/errno.h>
10 #include <linux/io.h>
11 #include <linux/err.h>
12 #include <linux/platform_device.h>
13
14 #include <video/imx-ipu-v3.h>
15 #include "ipu-prv.h"
16
17 struct ipu_di {
18 void __iomem *base;
19 int id;
20 u32 module;
21 struct clk *clk_di; /* display input clock */
22 struct clk *clk_ipu; /* IPU bus clock */
23 struct clk *clk_di_pixel; /* resulting pixel clock */
24 bool inuse;
25 struct ipu_soc *ipu;
26 };
27
28 static DEFINE_MUTEX(di_mutex);
29
30 struct di_sync_config {
31 int run_count;
32 int run_src;
33 int offset_count;
34 int offset_src;
35 int repeat_count;
36 int cnt_clr_src;
37 int cnt_polarity_gen_en;
38 int cnt_polarity_clr_src;
39 int cnt_polarity_trigger_src;
40 int cnt_up;
41 int cnt_down;
42 };
43
44 enum di_pins {
45 DI_PIN11 = 0,
46 DI_PIN12 = 1,
47 DI_PIN13 = 2,
48 DI_PIN14 = 3,
49 DI_PIN15 = 4,
50 DI_PIN16 = 5,
51 DI_PIN17 = 6,
52 DI_PIN_CS = 7,
53
54 DI_PIN_SER_CLK = 0,
55 DI_PIN_SER_RS = 1,
56 };
57
58 enum di_sync_wave {
59 DI_SYNC_NONE = 0,
60 DI_SYNC_CLK = 1,
61 DI_SYNC_INT_HSYNC = 2,
62 DI_SYNC_HSYNC = 3,
63 DI_SYNC_VSYNC = 4,
64 DI_SYNC_DE = 6,
65
66 DI_SYNC_CNT1 = 2, /* counter >= 2 only */
67 DI_SYNC_CNT4 = 5, /* counter >= 5 only */
68 DI_SYNC_CNT5 = 6, /* counter >= 6 only */
69 };
70
71 #define SYNC_WAVE 0
72
73 #define DI_GENERAL 0x0000
74 #define DI_BS_CLKGEN0 0x0004
75 #define DI_BS_CLKGEN1 0x0008
76 #define DI_SW_GEN0(gen) (0x000c + 4 * ((gen) - 1))
77 #define DI_SW_GEN1(gen) (0x0030 + 4 * ((gen) - 1))
78 #define DI_STP_REP(gen) (0x0148 + 4 * (((gen) - 1)/2))
79 #define DI_SYNC_AS_GEN 0x0054
80 #define DI_DW_GEN(gen) (0x0058 + 4 * (gen))
81 #define DI_DW_SET(gen, set) (0x0088 + 4 * ((gen) + 0xc * (set)))
82 #define DI_SER_CONF 0x015c
83 #define DI_SSC 0x0160
84 #define DI_POL 0x0164
85 #define DI_AW0 0x0168
86 #define DI_AW1 0x016c
87 #define DI_SCR_CONF 0x0170
88 #define DI_STAT 0x0174
89
90 #define DI_SW_GEN0_RUN_COUNT(x) ((x) << 19)
91 #define DI_SW_GEN0_RUN_SRC(x) ((x) << 16)
92 #define DI_SW_GEN0_OFFSET_COUNT(x) ((x) << 3)
93 #define DI_SW_GEN0_OFFSET_SRC(x) ((x) << 0)
94
95 #define DI_SW_GEN1_CNT_POL_GEN_EN(x) ((x) << 29)
96 #define DI_SW_GEN1_CNT_CLR_SRC(x) ((x) << 25)
97 #define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x) ((x) << 12)
98 #define DI_SW_GEN1_CNT_POL_CLR_SRC(x) ((x) << 9)
99 #define DI_SW_GEN1_CNT_DOWN(x) ((x) << 16)
100 #define DI_SW_GEN1_CNT_UP(x) (x)
101 #define DI_SW_GEN1_AUTO_RELOAD (0x10000000)
102
103 #define DI_DW_GEN_ACCESS_SIZE_OFFSET 24
104 #define DI_DW_GEN_COMPONENT_SIZE_OFFSET 16
105
106 #define DI_GEN_POLARITY_1 (1 << 0)
107 #define DI_GEN_POLARITY_2 (1 << 1)
108 #define DI_GEN_POLARITY_3 (1 << 2)
109 #define DI_GEN_POLARITY_4 (1 << 3)
110 #define DI_GEN_POLARITY_5 (1 << 4)
111 #define DI_GEN_POLARITY_6 (1 << 5)
112 #define DI_GEN_POLARITY_7 (1 << 6)
113 #define DI_GEN_POLARITY_8 (1 << 7)
114 #define DI_GEN_POLARITY_DISP_CLK (1 << 17)
115 #define DI_GEN_DI_CLK_EXT (1 << 20)
116 #define DI_GEN_DI_VSYNC_EXT (1 << 21)
117
118 #define DI_POL_DRDY_DATA_POLARITY (1 << 7)
119 #define DI_POL_DRDY_POLARITY_15 (1 << 4)
120
121 #define DI_VSYNC_SEL_OFFSET 13
122
ipu_di_read(struct ipu_di * di,unsigned offset)123 static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
124 {
125 return readl(di->base + offset);
126 }
127
ipu_di_write(struct ipu_di * di,u32 value,unsigned offset)128 static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
129 {
130 writel(value, di->base + offset);
131 }
132
ipu_di_data_wave_config(struct ipu_di * di,int wave_gen,int access_size,int component_size)133 static void ipu_di_data_wave_config(struct ipu_di *di,
134 int wave_gen,
135 int access_size, int component_size)
136 {
137 u32 reg;
138 reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
139 (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
140 ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
141 }
142
ipu_di_data_pin_config(struct ipu_di * di,int wave_gen,int di_pin,int set,int up,int down)143 static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
144 int set, int up, int down)
145 {
146 u32 reg;
147
148 reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
149 reg &= ~(0x3 << (di_pin * 2));
150 reg |= set << (di_pin * 2);
151 ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
152
153 ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
154 }
155
ipu_di_sync_config(struct ipu_di * di,struct di_sync_config * config,int start,int count)156 static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
157 int start, int count)
158 {
159 u32 reg;
160 int i;
161
162 for (i = 0; i < count; i++) {
163 struct di_sync_config *c = &config[i];
164 int wave_gen = start + i + 1;
165
166 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
167 (c->repeat_count >= 0x1000) ||
168 (c->cnt_up >= 0x400) ||
169 (c->cnt_down >= 0x400)) {
170 dev_err(di->ipu->dev, "DI%d counters out of range.\n",
171 di->id);
172 return;
173 }
174
175 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
176 DI_SW_GEN0_RUN_SRC(c->run_src) |
177 DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
178 DI_SW_GEN0_OFFSET_SRC(c->offset_src);
179 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
180
181 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
182 DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
183 DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
184 c->cnt_polarity_trigger_src) |
185 DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
186 DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
187 DI_SW_GEN1_CNT_UP(c->cnt_up);
188
189 /* Enable auto reload */
190 if (c->repeat_count == 0)
191 reg |= DI_SW_GEN1_AUTO_RELOAD;
192
193 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
194
195 reg = ipu_di_read(di, DI_STP_REP(wave_gen));
196 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
197 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
198 ipu_di_write(di, reg, DI_STP_REP(wave_gen));
199 }
200 }
201
ipu_di_sync_config_interlaced(struct ipu_di * di,struct ipu_di_signal_cfg * sig)202 static void ipu_di_sync_config_interlaced(struct ipu_di *di,
203 struct ipu_di_signal_cfg *sig)
204 {
205 u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
206 sig->mode.hback_porch + sig->mode.hfront_porch;
207 u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
208 sig->mode.vback_porch + sig->mode.vfront_porch;
209 struct di_sync_config cfg[] = {
210 {
211 /* 1: internal VSYNC for each frame */
212 .run_count = v_total * 2 - 1,
213 .run_src = 3, /* == counter 7 */
214 }, {
215 /* PIN2: HSYNC waveform */
216 .run_count = h_total - 1,
217 .run_src = DI_SYNC_CLK,
218 .cnt_polarity_gen_en = 1,
219 .cnt_polarity_trigger_src = DI_SYNC_CLK,
220 .cnt_down = sig->mode.hsync_len * 2,
221 }, {
222 /* PIN3: VSYNC waveform */
223 .run_count = v_total - 1,
224 .run_src = 4, /* == counter 7 */
225 .cnt_polarity_gen_en = 1,
226 .cnt_polarity_trigger_src = 4, /* == counter 7 */
227 .cnt_down = sig->mode.vsync_len * 2,
228 .cnt_clr_src = DI_SYNC_CNT1,
229 }, {
230 /* 4: Field */
231 .run_count = v_total / 2,
232 .run_src = DI_SYNC_HSYNC,
233 .offset_count = h_total / 2,
234 .offset_src = DI_SYNC_CLK,
235 .repeat_count = 2,
236 .cnt_clr_src = DI_SYNC_CNT1,
237 }, {
238 /* 5: Active lines */
239 .run_src = DI_SYNC_HSYNC,
240 .offset_count = (sig->mode.vsync_len +
241 sig->mode.vback_porch) / 2,
242 .offset_src = DI_SYNC_HSYNC,
243 .repeat_count = sig->mode.vactive / 2,
244 .cnt_clr_src = DI_SYNC_CNT4,
245 }, {
246 /* 6: Active pixel, referenced by DC */
247 .run_src = DI_SYNC_CLK,
248 .offset_count = sig->mode.hsync_len +
249 sig->mode.hback_porch,
250 .offset_src = DI_SYNC_CLK,
251 .repeat_count = sig->mode.hactive,
252 .cnt_clr_src = DI_SYNC_CNT5,
253 }, {
254 /* 7: Half line HSYNC */
255 .run_count = h_total / 2 - 1,
256 .run_src = DI_SYNC_CLK,
257 }
258 };
259
260 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
261
262 ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
263 }
264
ipu_di_sync_config_noninterlaced(struct ipu_di * di,struct ipu_di_signal_cfg * sig,int div)265 static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
266 struct ipu_di_signal_cfg *sig, int div)
267 {
268 u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
269 sig->mode.hback_porch + sig->mode.hfront_porch;
270 u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
271 sig->mode.vback_porch + sig->mode.vfront_porch;
272 struct di_sync_config cfg[] = {
273 {
274 /* 1: INT_HSYNC */
275 .run_count = h_total - 1,
276 .run_src = DI_SYNC_CLK,
277 } , {
278 /* PIN2: HSYNC */
279 .run_count = h_total - 1,
280 .run_src = DI_SYNC_CLK,
281 .offset_count = div * sig->v_to_h_sync,
282 .offset_src = DI_SYNC_CLK,
283 .cnt_polarity_gen_en = 1,
284 .cnt_polarity_trigger_src = DI_SYNC_CLK,
285 .cnt_down = sig->mode.hsync_len * 2,
286 } , {
287 /* PIN3: VSYNC */
288 .run_count = v_total - 1,
289 .run_src = DI_SYNC_INT_HSYNC,
290 .cnt_polarity_gen_en = 1,
291 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
292 .cnt_down = sig->mode.vsync_len * 2,
293 } , {
294 /* 4: Line Active */
295 .run_src = DI_SYNC_HSYNC,
296 .offset_count = sig->mode.vsync_len +
297 sig->mode.vback_porch,
298 .offset_src = DI_SYNC_HSYNC,
299 .repeat_count = sig->mode.vactive,
300 .cnt_clr_src = DI_SYNC_VSYNC,
301 } , {
302 /* 5: Pixel Active, referenced by DC */
303 .run_src = DI_SYNC_CLK,
304 .offset_count = sig->mode.hsync_len +
305 sig->mode.hback_porch,
306 .offset_src = DI_SYNC_CLK,
307 .repeat_count = sig->mode.hactive,
308 .cnt_clr_src = 5, /* Line Active */
309 } , {
310 /* unused */
311 } , {
312 /* unused */
313 },
314 };
315 /* can't use #7 and #8 for line active and pixel active counters */
316 struct di_sync_config cfg_vga[] = {
317 {
318 /* 1: INT_HSYNC */
319 .run_count = h_total - 1,
320 .run_src = DI_SYNC_CLK,
321 } , {
322 /* 2: VSYNC */
323 .run_count = v_total - 1,
324 .run_src = DI_SYNC_INT_HSYNC,
325 } , {
326 /* 3: Line Active */
327 .run_src = DI_SYNC_INT_HSYNC,
328 .offset_count = sig->mode.vsync_len +
329 sig->mode.vback_porch,
330 .offset_src = DI_SYNC_INT_HSYNC,
331 .repeat_count = sig->mode.vactive,
332 .cnt_clr_src = 3 /* VSYNC */,
333 } , {
334 /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
335 .run_count = h_total - 1,
336 .run_src = DI_SYNC_CLK,
337 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
338 .offset_src = DI_SYNC_CLK,
339 .cnt_polarity_gen_en = 1,
340 .cnt_polarity_trigger_src = DI_SYNC_CLK,
341 .cnt_down = sig->mode.hsync_len * 2,
342 } , {
343 /* 5: Pixel Active signal to DC */
344 .run_src = DI_SYNC_CLK,
345 .offset_count = sig->mode.hsync_len +
346 sig->mode.hback_porch,
347 .offset_src = DI_SYNC_CLK,
348 .repeat_count = sig->mode.hactive,
349 .cnt_clr_src = 4, /* Line Active */
350 } , {
351 /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
352 .run_count = v_total - 1,
353 .run_src = DI_SYNC_INT_HSYNC,
354 .offset_count = 1, /* magic value from Freescale TVE driver */
355 .offset_src = DI_SYNC_INT_HSYNC,
356 .cnt_polarity_gen_en = 1,
357 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
358 .cnt_down = sig->mode.vsync_len * 2,
359 } , {
360 /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
361 .run_count = h_total - 1,
362 .run_src = DI_SYNC_CLK,
363 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
364 .offset_src = DI_SYNC_CLK,
365 .cnt_polarity_gen_en = 1,
366 .cnt_polarity_trigger_src = DI_SYNC_CLK,
367 .cnt_down = sig->mode.hsync_len * 2,
368 } , {
369 /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
370 .run_count = v_total - 1,
371 .run_src = DI_SYNC_INT_HSYNC,
372 .offset_count = 1, /* magic value from Freescale TVE driver */
373 .offset_src = DI_SYNC_INT_HSYNC,
374 .cnt_polarity_gen_en = 1,
375 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
376 .cnt_down = sig->mode.vsync_len * 2,
377 } , {
378 /* unused */
379 },
380 };
381
382 ipu_di_write(di, v_total - 1, DI_SCR_CONF);
383 if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
384 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
385 else
386 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
387 }
388
ipu_di_config_clock(struct ipu_di * di,const struct ipu_di_signal_cfg * sig)389 static void ipu_di_config_clock(struct ipu_di *di,
390 const struct ipu_di_signal_cfg *sig)
391 {
392 struct clk *clk;
393 unsigned clkgen0;
394 uint32_t val;
395
396 if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
397 /*
398 * CLKMODE_EXT means we must use the DI clock: this is
399 * needed for things like LVDS which needs to feed the
400 * DI and LDB with the same pixel clock.
401 */
402 clk = di->clk_di;
403
404 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
405 /*
406 * CLKMODE_SYNC means that we want the DI to be
407 * clocked at the same rate as the parent clock.
408 * This is needed (eg) for LDB which needs to be
409 * fed with the same pixel clock. We assume that
410 * the LDB clock has already been set correctly.
411 */
412 clkgen0 = 1 << 4;
413 } else {
414 /*
415 * We can use the divider. We should really have
416 * a flag here indicating whether the bridge can
417 * cope with a fractional divider or not. For the
418 * time being, let's go for simplicitly and
419 * reliability.
420 */
421 unsigned long in_rate;
422 unsigned div;
423
424 clk_set_rate(clk, sig->mode.pixelclock);
425
426 in_rate = clk_get_rate(clk);
427 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
428 div = clamp(div, 1U, 255U);
429
430 clkgen0 = div << 4;
431 }
432 } else {
433 /*
434 * For other interfaces, we can arbitarily select between
435 * the DI specific clock and the internal IPU clock. See
436 * DI_GENERAL bit 20. We select the IPU clock if it can
437 * give us a clock rate within 1% of the requested frequency,
438 * otherwise we use the DI clock.
439 */
440 unsigned long rate, clkrate;
441 unsigned div, error;
442
443 clkrate = clk_get_rate(di->clk_ipu);
444 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
445 div = clamp(div, 1U, 255U);
446 rate = clkrate / div;
447
448 error = rate / (sig->mode.pixelclock / 1000);
449
450 dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n",
451 rate, div, (signed)(error - 1000) / 10, error % 10);
452
453 /* Allow a 1% error */
454 if (error < 1010 && error >= 990) {
455 clk = di->clk_ipu;
456
457 clkgen0 = div << 4;
458 } else {
459 unsigned long in_rate;
460 unsigned div;
461
462 clk = di->clk_di;
463
464 clk_set_rate(clk, sig->mode.pixelclock);
465
466 in_rate = clk_get_rate(clk);
467 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
468 div = clamp(div, 1U, 255U);
469
470 clkgen0 = div << 4;
471 }
472 }
473
474 di->clk_di_pixel = clk;
475
476 /* Set the divider */
477 ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
478
479 /*
480 * Set the high/low periods. Bits 24:16 give us the falling edge,
481 * and bits 8:0 give the rising edge. LSB is fraction, and is
482 * based on the divider above. We want a 50% duty cycle, so set
483 * the falling edge to be half the divider.
484 */
485 ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
486
487 /* Finally select the input clock */
488 val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
489 if (clk == di->clk_di)
490 val |= DI_GEN_DI_CLK_EXT;
491 ipu_di_write(di, val, DI_GENERAL);
492
493 dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
494 sig->mode.pixelclock,
495 clk_get_rate(di->clk_ipu),
496 clk_get_rate(di->clk_di),
497 clk == di->clk_di ? "DI" : "IPU",
498 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
499 }
500
501 /*
502 * This function is called to adjust a video mode to IPU restrictions.
503 * It is meant to be called from drm crtc mode_fixup() methods.
504 */
ipu_di_adjust_videomode(struct ipu_di * di,struct videomode * mode)505 int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
506 {
507 u32 diff;
508
509 if (!IS_ALIGNED(mode->hactive, 8) &&
510 mode->hfront_porch < ALIGN(mode->hactive, 8) - mode->hactive) {
511 dev_err(di->ipu->dev, "hactive %d is not aligned to 8 and front porch is too small to compensate\n",
512 mode->hactive);
513 return -EINVAL;
514 }
515
516 if (mode->vfront_porch >= 2)
517 return 0;
518
519 diff = 2 - mode->vfront_porch;
520
521 if (mode->vback_porch >= diff) {
522 mode->vfront_porch = 2;
523 mode->vback_porch -= diff;
524 } else if (mode->vsync_len > diff) {
525 mode->vfront_porch = 2;
526 mode->vsync_len = mode->vsync_len - diff;
527 } else {
528 dev_warn(di->ipu->dev, "failed to adjust videomode\n");
529 return -EINVAL;
530 }
531
532 dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n");
533 return 0;
534 }
535 EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
536
ipu_di_gen_polarity(int pin)537 static u32 ipu_di_gen_polarity(int pin)
538 {
539 switch (pin) {
540 case 1:
541 return DI_GEN_POLARITY_1;
542 case 2:
543 return DI_GEN_POLARITY_2;
544 case 3:
545 return DI_GEN_POLARITY_3;
546 case 4:
547 return DI_GEN_POLARITY_4;
548 case 5:
549 return DI_GEN_POLARITY_5;
550 case 6:
551 return DI_GEN_POLARITY_6;
552 case 7:
553 return DI_GEN_POLARITY_7;
554 case 8:
555 return DI_GEN_POLARITY_8;
556 }
557 return 0;
558 }
559
ipu_di_init_sync_panel(struct ipu_di * di,struct ipu_di_signal_cfg * sig)560 int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
561 {
562 u32 reg;
563 u32 di_gen, vsync_cnt;
564 u32 div;
565
566 dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
567 di->id, sig->mode.hactive, sig->mode.vactive);
568
569 dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
570 clk_get_rate(di->clk_ipu),
571 clk_get_rate(di->clk_di),
572 sig->mode.pixelclock);
573
574 mutex_lock(&di_mutex);
575
576 ipu_di_config_clock(di, sig);
577
578 div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
579 div = div / 16; /* Now divider is integer portion */
580
581 /* Setup pixel clock timing */
582 /* Down time is half of period */
583 ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);
584
585 ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
586 ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
587
588 di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
589 di_gen |= DI_GEN_DI_VSYNC_EXT;
590
591 if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
592 ipu_di_sync_config_interlaced(di, sig);
593
594 /* set y_sel = 1 */
595 di_gen |= 0x10000000;
596
597 vsync_cnt = 3;
598 } else {
599 ipu_di_sync_config_noninterlaced(di, sig, div);
600
601 vsync_cnt = 3;
602 if (di->id == 1)
603 /*
604 * TODO: change only for TVEv2, parallel display
605 * uses pin 2 / 3
606 */
607 if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
608 vsync_cnt = 6;
609 }
610
611 if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
612 di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
613 if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
614 di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
615
616 if (sig->clk_pol)
617 di_gen |= DI_GEN_POLARITY_DISP_CLK;
618
619 ipu_di_write(di, di_gen, DI_GENERAL);
620
621 ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
622 DI_SYNC_AS_GEN);
623
624 reg = ipu_di_read(di, DI_POL);
625 reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
626
627 if (sig->enable_pol)
628 reg |= DI_POL_DRDY_POLARITY_15;
629 if (sig->data_pol)
630 reg |= DI_POL_DRDY_DATA_POLARITY;
631
632 ipu_di_write(di, reg, DI_POL);
633
634 mutex_unlock(&di_mutex);
635
636 return 0;
637 }
638 EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
639
ipu_di_enable(struct ipu_di * di)640 int ipu_di_enable(struct ipu_di *di)
641 {
642 int ret;
643
644 WARN_ON(IS_ERR(di->clk_di_pixel));
645
646 ret = clk_prepare_enable(di->clk_di_pixel);
647 if (ret)
648 return ret;
649
650 ipu_module_enable(di->ipu, di->module);
651
652 return 0;
653 }
654 EXPORT_SYMBOL_GPL(ipu_di_enable);
655
ipu_di_disable(struct ipu_di * di)656 int ipu_di_disable(struct ipu_di *di)
657 {
658 WARN_ON(IS_ERR(di->clk_di_pixel));
659
660 ipu_module_disable(di->ipu, di->module);
661
662 clk_disable_unprepare(di->clk_di_pixel);
663
664 return 0;
665 }
666 EXPORT_SYMBOL_GPL(ipu_di_disable);
667
ipu_di_get_num(struct ipu_di * di)668 int ipu_di_get_num(struct ipu_di *di)
669 {
670 return di->id;
671 }
672 EXPORT_SYMBOL_GPL(ipu_di_get_num);
673
674 static DEFINE_MUTEX(ipu_di_lock);
675
ipu_di_get(struct ipu_soc * ipu,int disp)676 struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
677 {
678 struct ipu_di *di;
679
680 if (disp > 1)
681 return ERR_PTR(-EINVAL);
682
683 di = ipu->di_priv[disp];
684
685 mutex_lock(&ipu_di_lock);
686
687 if (di->inuse) {
688 di = ERR_PTR(-EBUSY);
689 goto out;
690 }
691
692 di->inuse = true;
693 out:
694 mutex_unlock(&ipu_di_lock);
695
696 return di;
697 }
698 EXPORT_SYMBOL_GPL(ipu_di_get);
699
ipu_di_put(struct ipu_di * di)700 void ipu_di_put(struct ipu_di *di)
701 {
702 mutex_lock(&ipu_di_lock);
703
704 di->inuse = false;
705
706 mutex_unlock(&ipu_di_lock);
707 }
708 EXPORT_SYMBOL_GPL(ipu_di_put);
709
ipu_di_init(struct ipu_soc * ipu,struct device * dev,int id,unsigned long base,u32 module,struct clk * clk_ipu)710 int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
711 unsigned long base,
712 u32 module, struct clk *clk_ipu)
713 {
714 struct ipu_di *di;
715
716 if (id > 1)
717 return -ENODEV;
718
719 di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
720 if (!di)
721 return -ENOMEM;
722
723 ipu->di_priv[id] = di;
724
725 di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
726 if (IS_ERR(di->clk_di))
727 return PTR_ERR(di->clk_di);
728
729 di->module = module;
730 di->id = id;
731 di->clk_ipu = clk_ipu;
732 di->base = devm_ioremap(dev, base, PAGE_SIZE);
733 if (!di->base)
734 return -ENOMEM;
735
736 ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
737
738 dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
739 id, base, di->base);
740 di->inuse = false;
741 di->ipu = ipu;
742
743 return 0;
744 }
745
ipu_di_exit(struct ipu_soc * ipu,int id)746 void ipu_di_exit(struct ipu_soc *ipu, int id)
747 {
748 }
749
