1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2019, Linaro Limited
5 */
6
7#include <dt-bindings/dma/qcom-gpi.h>
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9#include <dt-bindings/power/qcom-aoss-qmp.h>
10#include <dt-bindings/power/qcom-rpmpd.h>
11#include <dt-bindings/soc/qcom,rpmh-rsc.h>
12#include <dt-bindings/clock/qcom,rpmh.h>
13#include <dt-bindings/clock/qcom,gcc-sm8150.h>
14#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
15#include <dt-bindings/interconnect/qcom,osm-l3.h>
16#include <dt-bindings/interconnect/qcom,sm8150.h>
17#include <dt-bindings/thermal/thermal.h>
18
19/ {
20	interrupt-parent = <&intc>;
21
22	#address-cells = <2>;
23	#size-cells = <2>;
24
25	chosen { };
26
27	clocks {
28		xo_board: xo-board {
29			compatible = "fixed-clock";
30			#clock-cells = <0>;
31			clock-frequency = <38400000>;
32			clock-output-names = "xo_board";
33		};
34
35		sleep_clk: sleep-clk {
36			compatible = "fixed-clock";
37			#clock-cells = <0>;
38			clock-frequency = <32764>;
39			clock-output-names = "sleep_clk";
40		};
41	};
42
43	cpus {
44		#address-cells = <2>;
45		#size-cells = <0>;
46
47		CPU0: cpu@0 {
48			device_type = "cpu";
49			compatible = "qcom,kryo485";
50			reg = <0x0 0x0>;
51			enable-method = "psci";
52			capacity-dmips-mhz = <488>;
53			dynamic-power-coefficient = <232>;
54			next-level-cache = <&L2_0>;
55			qcom,freq-domain = <&cpufreq_hw 0>;
56			operating-points-v2 = <&cpu0_opp_table>;
57			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
58					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
59			power-domains = <&CPU_PD0>;
60			power-domain-names = "psci";
61			#cooling-cells = <2>;
62			L2_0: l2-cache {
63				compatible = "cache";
64				next-level-cache = <&L3_0>;
65				L3_0: l3-cache {
66				      compatible = "cache";
67				};
68			};
69		};
70
71		CPU1: cpu@100 {
72			device_type = "cpu";
73			compatible = "qcom,kryo485";
74			reg = <0x0 0x100>;
75			enable-method = "psci";
76			capacity-dmips-mhz = <488>;
77			dynamic-power-coefficient = <232>;
78			next-level-cache = <&L2_100>;
79			qcom,freq-domain = <&cpufreq_hw 0>;
80			operating-points-v2 = <&cpu0_opp_table>;
81			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
82					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
83			power-domains = <&CPU_PD1>;
84			power-domain-names = "psci";
85			#cooling-cells = <2>;
86			L2_100: l2-cache {
87				compatible = "cache";
88				next-level-cache = <&L3_0>;
89			};
90
91		};
92
93		CPU2: cpu@200 {
94			device_type = "cpu";
95			compatible = "qcom,kryo485";
96			reg = <0x0 0x200>;
97			enable-method = "psci";
98			capacity-dmips-mhz = <488>;
99			dynamic-power-coefficient = <232>;
100			next-level-cache = <&L2_200>;
101			qcom,freq-domain = <&cpufreq_hw 0>;
102			operating-points-v2 = <&cpu0_opp_table>;
103			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
104					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
105			power-domains = <&CPU_PD2>;
106			power-domain-names = "psci";
107			#cooling-cells = <2>;
108			L2_200: l2-cache {
109				compatible = "cache";
110				next-level-cache = <&L3_0>;
111			};
112		};
113
114		CPU3: cpu@300 {
115			device_type = "cpu";
116			compatible = "qcom,kryo485";
117			reg = <0x0 0x300>;
118			enable-method = "psci";
119			capacity-dmips-mhz = <488>;
120			dynamic-power-coefficient = <232>;
121			next-level-cache = <&L2_300>;
122			qcom,freq-domain = <&cpufreq_hw 0>;
123			operating-points-v2 = <&cpu0_opp_table>;
124			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
125					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
126			power-domains = <&CPU_PD3>;
127			power-domain-names = "psci";
128			#cooling-cells = <2>;
129			L2_300: l2-cache {
130				compatible = "cache";
131				next-level-cache = <&L3_0>;
132			};
133		};
134
135		CPU4: cpu@400 {
136			device_type = "cpu";
137			compatible = "qcom,kryo485";
138			reg = <0x0 0x400>;
139			enable-method = "psci";
140			capacity-dmips-mhz = <1024>;
141			dynamic-power-coefficient = <369>;
142			next-level-cache = <&L2_400>;
143			qcom,freq-domain = <&cpufreq_hw 1>;
144			operating-points-v2 = <&cpu4_opp_table>;
145			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
146					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
147			power-domains = <&CPU_PD4>;
148			power-domain-names = "psci";
149			#cooling-cells = <2>;
150			L2_400: l2-cache {
151				compatible = "cache";
152				next-level-cache = <&L3_0>;
153			};
154		};
155
156		CPU5: cpu@500 {
157			device_type = "cpu";
158			compatible = "qcom,kryo485";
159			reg = <0x0 0x500>;
160			enable-method = "psci";
161			capacity-dmips-mhz = <1024>;
162			dynamic-power-coefficient = <369>;
163			next-level-cache = <&L2_500>;
164			qcom,freq-domain = <&cpufreq_hw 1>;
165			operating-points-v2 = <&cpu4_opp_table>;
166			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
167					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
168			power-domains = <&CPU_PD5>;
169			power-domain-names = "psci";
170			#cooling-cells = <2>;
171			L2_500: l2-cache {
172				compatible = "cache";
173				next-level-cache = <&L3_0>;
174			};
175		};
176
177		CPU6: cpu@600 {
178			device_type = "cpu";
179			compatible = "qcom,kryo485";
180			reg = <0x0 0x600>;
181			enable-method = "psci";
182			capacity-dmips-mhz = <1024>;
183			dynamic-power-coefficient = <369>;
184			next-level-cache = <&L2_600>;
185			qcom,freq-domain = <&cpufreq_hw 1>;
186			operating-points-v2 = <&cpu4_opp_table>;
187			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
188					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
189			power-domains = <&CPU_PD6>;
190			power-domain-names = "psci";
191			#cooling-cells = <2>;
192			L2_600: l2-cache {
193				compatible = "cache";
194				next-level-cache = <&L3_0>;
195			};
196		};
197
198		CPU7: cpu@700 {
199			device_type = "cpu";
200			compatible = "qcom,kryo485";
201			reg = <0x0 0x700>;
202			enable-method = "psci";
203			capacity-dmips-mhz = <1024>;
204			dynamic-power-coefficient = <421>;
205			next-level-cache = <&L2_700>;
206			qcom,freq-domain = <&cpufreq_hw 2>;
207			operating-points-v2 = <&cpu7_opp_table>;
208			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
209					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
210			power-domains = <&CPU_PD7>;
211			power-domain-names = "psci";
212			#cooling-cells = <2>;
213			L2_700: l2-cache {
214				compatible = "cache";
215				next-level-cache = <&L3_0>;
216			};
217		};
218
219		cpu-map {
220			cluster0 {
221				core0 {
222					cpu = <&CPU0>;
223				};
224
225				core1 {
226					cpu = <&CPU1>;
227				};
228
229				core2 {
230					cpu = <&CPU2>;
231				};
232
233				core3 {
234					cpu = <&CPU3>;
235				};
236
237				core4 {
238					cpu = <&CPU4>;
239				};
240
241				core5 {
242					cpu = <&CPU5>;
243				};
244
245				core6 {
246					cpu = <&CPU6>;
247				};
248
249				core7 {
250					cpu = <&CPU7>;
251				};
252			};
253		};
254
255		idle-states {
256			entry-method = "psci";
257
258			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
259				compatible = "arm,idle-state";
260				idle-state-name = "little-rail-power-collapse";
261				arm,psci-suspend-param = <0x40000004>;
262				entry-latency-us = <355>;
263				exit-latency-us = <909>;
264				min-residency-us = <3934>;
265				local-timer-stop;
266			};
267
268			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
269				compatible = "arm,idle-state";
270				idle-state-name = "big-rail-power-collapse";
271				arm,psci-suspend-param = <0x40000004>;
272				entry-latency-us = <241>;
273				exit-latency-us = <1461>;
274				min-residency-us = <4488>;
275				local-timer-stop;
276			};
277		};
278
279		domain-idle-states {
280			CLUSTER_SLEEP_0: cluster-sleep-0 {
281				compatible = "domain-idle-state";
282				idle-state-name = "cluster-power-collapse";
283				arm,psci-suspend-param = <0x4100c244>;
284				entry-latency-us = <3263>;
285				exit-latency-us = <6562>;
286				min-residency-us = <9987>;
287				local-timer-stop;
288			};
289		};
290	};
291
292	cpu0_opp_table: cpu0_opp_table {
293		compatible = "operating-points-v2";
294		opp-shared;
295
296		cpu0_opp1: opp-300000000 {
297			opp-hz = /bits/ 64 <300000000>;
298			opp-peak-kBps = <800000 9600000>;
299		};
300
301		cpu0_opp2: opp-403200000 {
302			opp-hz = /bits/ 64 <403200000>;
303			opp-peak-kBps = <800000 9600000>;
304		};
305
306		cpu0_opp3: opp-499200000 {
307			opp-hz = /bits/ 64 <499200000>;
308			opp-peak-kBps = <800000 12902400>;
309		};
310
311		cpu0_opp4: opp-576000000 {
312			opp-hz = /bits/ 64 <576000000>;
313			opp-peak-kBps = <800000 12902400>;
314		};
315
316		cpu0_opp5: opp-672000000 {
317			opp-hz = /bits/ 64 <672000000>;
318			opp-peak-kBps = <800000 15974400>;
319		};
320
321		cpu0_opp6: opp-768000000 {
322			opp-hz = /bits/ 64 <768000000>;
323			opp-peak-kBps = <1804000 19660800>;
324		};
325
326		cpu0_opp7: opp-844800000 {
327			opp-hz = /bits/ 64 <844800000>;
328			opp-peak-kBps = <1804000 19660800>;
329		};
330
331		cpu0_opp8: opp-940800000 {
332			opp-hz = /bits/ 64 <940800000>;
333			opp-peak-kBps = <1804000 22732800>;
334		};
335
336		cpu0_opp9: opp-1036800000 {
337			opp-hz = /bits/ 64 <1036800000>;
338			opp-peak-kBps = <1804000 22732800>;
339		};
340
341		cpu0_opp10: opp-1113600000 {
342			opp-hz = /bits/ 64 <1113600000>;
343			opp-peak-kBps = <2188000 25804800>;
344		};
345
346		cpu0_opp11: opp-1209600000 {
347			opp-hz = /bits/ 64 <1209600000>;
348			opp-peak-kBps = <2188000 31948800>;
349		};
350
351		cpu0_opp12: opp-1305600000 {
352			opp-hz = /bits/ 64 <1305600000>;
353			opp-peak-kBps = <3072000 31948800>;
354		};
355
356		cpu0_opp13: opp-1382400000 {
357			opp-hz = /bits/ 64 <1382400000>;
358			opp-peak-kBps = <3072000 31948800>;
359		};
360
361		cpu0_opp14: opp-1478400000 {
362			opp-hz = /bits/ 64 <1478400000>;
363			opp-peak-kBps = <3072000 31948800>;
364		};
365
366		cpu0_opp15: opp-1555200000 {
367			opp-hz = /bits/ 64 <1555200000>;
368			opp-peak-kBps = <3072000 40550400>;
369		};
370
371		cpu0_opp16: opp-1632000000 {
372			opp-hz = /bits/ 64 <1632000000>;
373			opp-peak-kBps = <3072000 40550400>;
374		};
375
376		cpu0_opp17: opp-1708800000 {
377			opp-hz = /bits/ 64 <1708800000>;
378			opp-peak-kBps = <3072000 43008000>;
379		};
380
381		cpu0_opp18: opp-1785600000 {
382			opp-hz = /bits/ 64 <1785600000>;
383			opp-peak-kBps = <3072000 43008000>;
384		};
385	};
386
387	cpu4_opp_table: cpu4_opp_table {
388		compatible = "operating-points-v2";
389		opp-shared;
390
391		cpu4_opp1: opp-710400000 {
392			opp-hz = /bits/ 64 <710400000>;
393			opp-peak-kBps = <1804000 15974400>;
394		};
395
396		cpu4_opp2: opp-825600000 {
397			opp-hz = /bits/ 64 <825600000>;
398			opp-peak-kBps = <2188000 19660800>;
399		};
400
401		cpu4_opp3: opp-940800000 {
402			opp-hz = /bits/ 64 <940800000>;
403			opp-peak-kBps = <2188000 22732800>;
404		};
405
406		cpu4_opp4: opp-1056000000 {
407			opp-hz = /bits/ 64 <1056000000>;
408			opp-peak-kBps = <3072000 25804800>;
409		};
410
411		cpu4_opp5: opp-1171200000 {
412			opp-hz = /bits/ 64 <1171200000>;
413			opp-peak-kBps = <3072000 31948800>;
414		};
415
416		cpu4_opp6: opp-1286400000 {
417			opp-hz = /bits/ 64 <1286400000>;
418			opp-peak-kBps = <4068000 31948800>;
419		};
420
421		cpu4_opp7: opp-1401600000 {
422			opp-hz = /bits/ 64 <1401600000>;
423			opp-peak-kBps = <4068000 31948800>;
424		};
425
426		cpu4_opp8: opp-1497600000 {
427			opp-hz = /bits/ 64 <1497600000>;
428			opp-peak-kBps = <4068000 40550400>;
429		};
430
431		cpu4_opp9: opp-1612800000 {
432			opp-hz = /bits/ 64 <1612800000>;
433			opp-peak-kBps = <4068000 40550400>;
434		};
435
436		cpu4_opp10: opp-1708800000 {
437			opp-hz = /bits/ 64 <1708800000>;
438			opp-peak-kBps = <4068000 43008000>;
439		};
440
441		cpu4_opp11: opp-1804800000 {
442			opp-hz = /bits/ 64 <1804800000>;
443			opp-peak-kBps = <6220000 43008000>;
444		};
445
446		cpu4_opp12: opp-1920000000 {
447			opp-hz = /bits/ 64 <1920000000>;
448			opp-peak-kBps = <6220000 49152000>;
449		};
450
451		cpu4_opp13: opp-2016000000 {
452			opp-hz = /bits/ 64 <2016000000>;
453			opp-peak-kBps = <7216000 49152000>;
454		};
455
456		cpu4_opp14: opp-2131200000 {
457			opp-hz = /bits/ 64 <2131200000>;
458			opp-peak-kBps = <8368000 49152000>;
459		};
460
461		cpu4_opp15: opp-2227200000 {
462			opp-hz = /bits/ 64 <2227200000>;
463			opp-peak-kBps = <8368000 51609600>;
464		};
465
466		cpu4_opp16: opp-2323200000 {
467			opp-hz = /bits/ 64 <2323200000>;
468			opp-peak-kBps = <8368000 51609600>;
469		};
470
471		cpu4_opp17: opp-2419200000 {
472			opp-hz = /bits/ 64 <2419200000>;
473			opp-peak-kBps = <8368000 51609600>;
474		};
475	};
476
477	cpu7_opp_table: cpu7_opp_table {
478		compatible = "operating-points-v2";
479		opp-shared;
480
481		cpu7_opp1: opp-825600000 {
482			opp-hz = /bits/ 64 <825600000>;
483			opp-peak-kBps = <2188000 19660800>;
484		};
485
486		cpu7_opp2: opp-940800000 {
487			opp-hz = /bits/ 64 <940800000>;
488			opp-peak-kBps = <2188000 22732800>;
489		};
490
491		cpu7_opp3: opp-1056000000 {
492			opp-hz = /bits/ 64 <1056000000>;
493			opp-peak-kBps = <3072000 25804800>;
494		};
495
496		cpu7_opp4: opp-1171200000 {
497			opp-hz = /bits/ 64 <1171200000>;
498			opp-peak-kBps = <3072000 31948800>;
499		};
500
501		cpu7_opp5: opp-1286400000 {
502			opp-hz = /bits/ 64 <1286400000>;
503			opp-peak-kBps = <4068000 31948800>;
504		};
505
506		cpu7_opp6: opp-1401600000 {
507			opp-hz = /bits/ 64 <1401600000>;
508			opp-peak-kBps = <4068000 31948800>;
509		};
510
511		cpu7_opp7: opp-1497600000 {
512			opp-hz = /bits/ 64 <1497600000>;
513			opp-peak-kBps = <4068000 40550400>;
514		};
515
516		cpu7_opp8: opp-1612800000 {
517			opp-hz = /bits/ 64 <1612800000>;
518			opp-peak-kBps = <4068000 40550400>;
519		};
520
521		cpu7_opp9: opp-1708800000 {
522			opp-hz = /bits/ 64 <1708800000>;
523			opp-peak-kBps = <4068000 43008000>;
524		};
525
526		cpu7_opp10: opp-1804800000 {
527			opp-hz = /bits/ 64 <1804800000>;
528			opp-peak-kBps = <6220000 43008000>;
529		};
530
531		cpu7_opp11: opp-1920000000 {
532			opp-hz = /bits/ 64 <1920000000>;
533			opp-peak-kBps = <6220000 49152000>;
534		};
535
536		cpu7_opp12: opp-2016000000 {
537			opp-hz = /bits/ 64 <2016000000>;
538			opp-peak-kBps = <7216000 49152000>;
539		};
540
541		cpu7_opp13: opp-2131200000 {
542			opp-hz = /bits/ 64 <2131200000>;
543			opp-peak-kBps = <8368000 49152000>;
544		};
545
546		cpu7_opp14: opp-2227200000 {
547			opp-hz = /bits/ 64 <2227200000>;
548			opp-peak-kBps = <8368000 51609600>;
549		};
550
551		cpu7_opp15: opp-2323200000 {
552			opp-hz = /bits/ 64 <2323200000>;
553			opp-peak-kBps = <8368000 51609600>;
554		};
555
556		cpu7_opp16: opp-2419200000 {
557			opp-hz = /bits/ 64 <2419200000>;
558			opp-peak-kBps = <8368000 51609600>;
559		};
560
561		cpu7_opp17: opp-2534400000 {
562			opp-hz = /bits/ 64 <2534400000>;
563			opp-peak-kBps = <8368000 51609600>;
564		};
565
566		cpu7_opp18: opp-2649600000 {
567			opp-hz = /bits/ 64 <2649600000>;
568			opp-peak-kBps = <8368000 51609600>;
569		};
570
571		cpu7_opp19: opp-2745600000 {
572			opp-hz = /bits/ 64 <2745600000>;
573			opp-peak-kBps = <8368000 51609600>;
574		};
575
576		cpu7_opp20: opp-2841600000 {
577			opp-hz = /bits/ 64 <2841600000>;
578			opp-peak-kBps = <8368000 51609600>;
579		};
580	};
581
582	firmware {
583		scm: scm {
584			compatible = "qcom,scm-sm8150", "qcom,scm";
585			#reset-cells = <1>;
586		};
587	};
588
589	tcsr_mutex: hwlock {
590		compatible = "qcom,tcsr-mutex";
591		syscon = <&tcsr_mutex_regs 0 0x1000>;
592		#hwlock-cells = <1>;
593	};
594
595	memory@80000000 {
596		device_type = "memory";
597		/* We expect the bootloader to fill in the size */
598		reg = <0x0 0x80000000 0x0 0x0>;
599	};
600
601	pmu {
602		compatible = "arm,armv8-pmuv3";
603		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
604	};
605
606	psci {
607		compatible = "arm,psci-1.0";
608		method = "smc";
609
610		CPU_PD0: cpu0 {
611			#power-domain-cells = <0>;
612			power-domains = <&CLUSTER_PD>;
613			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
614		};
615
616		CPU_PD1: cpu1 {
617			#power-domain-cells = <0>;
618			power-domains = <&CLUSTER_PD>;
619			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
620		};
621
622		CPU_PD2: cpu2 {
623			#power-domain-cells = <0>;
624			power-domains = <&CLUSTER_PD>;
625			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
626		};
627
628		CPU_PD3: cpu3 {
629			#power-domain-cells = <0>;
630			power-domains = <&CLUSTER_PD>;
631			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
632		};
633
634		CPU_PD4: cpu4 {
635			#power-domain-cells = <0>;
636			power-domains = <&CLUSTER_PD>;
637			domain-idle-states = <&BIG_CPU_SLEEP_0>;
638		};
639
640		CPU_PD5: cpu5 {
641			#power-domain-cells = <0>;
642			power-domains = <&CLUSTER_PD>;
643			domain-idle-states = <&BIG_CPU_SLEEP_0>;
644		};
645
646		CPU_PD6: cpu6 {
647			#power-domain-cells = <0>;
648			power-domains = <&CLUSTER_PD>;
649			domain-idle-states = <&BIG_CPU_SLEEP_0>;
650		};
651
652		CPU_PD7: cpu7 {
653			#power-domain-cells = <0>;
654			power-domains = <&CLUSTER_PD>;
655			domain-idle-states = <&BIG_CPU_SLEEP_0>;
656		};
657
658		CLUSTER_PD: cpu-cluster0 {
659			#power-domain-cells = <0>;
660			domain-idle-states = <&CLUSTER_SLEEP_0>;
661		};
662	};
663
664	reserved-memory {
665		#address-cells = <2>;
666		#size-cells = <2>;
667		ranges;
668
669		hyp_mem: memory@85700000 {
670			reg = <0x0 0x85700000 0x0 0x600000>;
671			no-map;
672		};
673
674		xbl_mem: memory@85d00000 {
675			reg = <0x0 0x85d00000 0x0 0x140000>;
676			no-map;
677		};
678
679		aop_mem: memory@85f00000 {
680			reg = <0x0 0x85f00000 0x0 0x20000>;
681			no-map;
682		};
683
684		aop_cmd_db: memory@85f20000 {
685			compatible = "qcom,cmd-db";
686			reg = <0x0 0x85f20000 0x0 0x20000>;
687			no-map;
688		};
689
690		smem_mem: memory@86000000 {
691			reg = <0x0 0x86000000 0x0 0x200000>;
692			no-map;
693		};
694
695		tz_mem: memory@86200000 {
696			reg = <0x0 0x86200000 0x0 0x3900000>;
697			no-map;
698		};
699
700		rmtfs_mem: memory@89b00000 {
701			compatible = "qcom,rmtfs-mem";
702			reg = <0x0 0x89b00000 0x0 0x200000>;
703			no-map;
704
705			qcom,client-id = <1>;
706			qcom,vmid = <15>;
707		};
708
709		camera_mem: memory@8b700000 {
710			reg = <0x0 0x8b700000 0x0 0x500000>;
711			no-map;
712		};
713
714		wlan_mem: memory@8bc00000 {
715			reg = <0x0 0x8bc00000 0x0 0x180000>;
716			no-map;
717		};
718
719		npu_mem: memory@8bd80000 {
720			reg = <0x0 0x8bd80000 0x0 0x80000>;
721			no-map;
722		};
723
724		adsp_mem: memory@8be00000 {
725			reg = <0x0 0x8be00000 0x0 0x1a00000>;
726			no-map;
727		};
728
729		mpss_mem: memory@8d800000 {
730			reg = <0x0 0x8d800000 0x0 0x9600000>;
731			no-map;
732		};
733
734		venus_mem: memory@96e00000 {
735			reg = <0x0 0x96e00000 0x0 0x500000>;
736			no-map;
737		};
738
739		slpi_mem: memory@97300000 {
740			reg = <0x0 0x97300000 0x0 0x1400000>;
741			no-map;
742		};
743
744		ipa_fw_mem: memory@98700000 {
745			reg = <0x0 0x98700000 0x0 0x10000>;
746			no-map;
747		};
748
749		ipa_gsi_mem: memory@98710000 {
750			reg = <0x0 0x98710000 0x0 0x5000>;
751			no-map;
752		};
753
754		gpu_mem: memory@98715000 {
755			reg = <0x0 0x98715000 0x0 0x2000>;
756			no-map;
757		};
758
759		spss_mem: memory@98800000 {
760			reg = <0x0 0x98800000 0x0 0x100000>;
761			no-map;
762		};
763
764		cdsp_mem: memory@98900000 {
765			reg = <0x0 0x98900000 0x0 0x1400000>;
766			no-map;
767		};
768
769		qseecom_mem: memory@9e400000 {
770			reg = <0x0 0x9e400000 0x0 0x1400000>;
771			no-map;
772		};
773	};
774
775	smem {
776		compatible = "qcom,smem";
777		memory-region = <&smem_mem>;
778		hwlocks = <&tcsr_mutex 3>;
779	};
780
781	smp2p-cdsp {
782		compatible = "qcom,smp2p";
783		qcom,smem = <94>, <432>;
784
785		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
786
787		mboxes = <&apss_shared 6>;
788
789		qcom,local-pid = <0>;
790		qcom,remote-pid = <5>;
791
792		cdsp_smp2p_out: master-kernel {
793			qcom,entry-name = "master-kernel";
794			#qcom,smem-state-cells = <1>;
795		};
796
797		cdsp_smp2p_in: slave-kernel {
798			qcom,entry-name = "slave-kernel";
799
800			interrupt-controller;
801			#interrupt-cells = <2>;
802		};
803	};
804
805	smp2p-lpass {
806		compatible = "qcom,smp2p";
807		qcom,smem = <443>, <429>;
808
809		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
810
811		mboxes = <&apss_shared 10>;
812
813		qcom,local-pid = <0>;
814		qcom,remote-pid = <2>;
815
816		adsp_smp2p_out: master-kernel {
817			qcom,entry-name = "master-kernel";
818			#qcom,smem-state-cells = <1>;
819		};
820
821		adsp_smp2p_in: slave-kernel {
822			qcom,entry-name = "slave-kernel";
823
824			interrupt-controller;
825			#interrupt-cells = <2>;
826		};
827	};
828
829	smp2p-mpss {
830		compatible = "qcom,smp2p";
831		qcom,smem = <435>, <428>;
832
833		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
834
835		mboxes = <&apss_shared 14>;
836
837		qcom,local-pid = <0>;
838		qcom,remote-pid = <1>;
839
840		modem_smp2p_out: master-kernel {
841			qcom,entry-name = "master-kernel";
842			#qcom,smem-state-cells = <1>;
843		};
844
845		modem_smp2p_in: slave-kernel {
846			qcom,entry-name = "slave-kernel";
847
848			interrupt-controller;
849			#interrupt-cells = <2>;
850		};
851	};
852
853	smp2p-slpi {
854		compatible = "qcom,smp2p";
855		qcom,smem = <481>, <430>;
856
857		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
858
859		mboxes = <&apss_shared 26>;
860
861		qcom,local-pid = <0>;
862		qcom,remote-pid = <3>;
863
864		slpi_smp2p_out: master-kernel {
865			qcom,entry-name = "master-kernel";
866			#qcom,smem-state-cells = <1>;
867		};
868
869		slpi_smp2p_in: slave-kernel {
870			qcom,entry-name = "slave-kernel";
871
872			interrupt-controller;
873			#interrupt-cells = <2>;
874		};
875	};
876
877	soc: soc@0 {
878		#address-cells = <2>;
879		#size-cells = <2>;
880		ranges = <0 0 0 0 0x10 0>;
881		dma-ranges = <0 0 0 0 0x10 0>;
882		compatible = "simple-bus";
883
884		gcc: clock-controller@100000 {
885			compatible = "qcom,gcc-sm8150";
886			reg = <0x0 0x00100000 0x0 0x1f0000>;
887			#clock-cells = <1>;
888			#reset-cells = <1>;
889			#power-domain-cells = <1>;
890			clock-names = "bi_tcxo",
891				      "sleep_clk";
892			clocks = <&rpmhcc RPMH_CXO_CLK>,
893				 <&sleep_clk>;
894		};
895
896		gpi_dma0: dma-controller@800000 {
897			compatible = "qcom,sm8150-gpi-dma";
898			reg = <0 0x800000 0 0x60000>;
899			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
900				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
901				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
902				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
903				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
904				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
905				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
906				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
907				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
908				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
909				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
910				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
911				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
912			dma-channels = <13>;
913			dma-channel-mask = <0xfa>;
914			iommus = <&apps_smmu 0x00d6 0x0>;
915			#dma-cells = <3>;
916			status = "disabled";
917		};
918
919		qupv3_id_0: geniqup@8c0000 {
920			compatible = "qcom,geni-se-qup";
921			reg = <0x0 0x008c0000 0x0 0x6000>;
922			clock-names = "m-ahb", "s-ahb";
923			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
924				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
925			iommus = <&apps_smmu 0xc3 0x0>;
926			#address-cells = <2>;
927			#size-cells = <2>;
928			ranges;
929			status = "disabled";
930
931			i2c0: i2c@880000 {
932				compatible = "qcom,geni-i2c";
933				reg = <0 0x00880000 0 0x4000>;
934				clock-names = "se";
935				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
936				pinctrl-names = "default";
937				pinctrl-0 = <&qup_i2c0_default>;
938				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
939				#address-cells = <1>;
940				#size-cells = <0>;
941				status = "disabled";
942			};
943
944			spi0: spi@880000 {
945				compatible = "qcom,geni-spi";
946				reg = <0 0x880000 0 0x4000>;
947				reg-names = "se";
948				clock-names = "se";
949				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
950				pinctrl-names = "default";
951				pinctrl-0 = <&qup_spi0_default>;
952				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
953				spi-max-frequency = <50000000>;
954				#address-cells = <1>;
955				#size-cells = <0>;
956				status = "disabled";
957			};
958
959			i2c1: i2c@884000 {
960				compatible = "qcom,geni-i2c";
961				reg = <0 0x00884000 0 0x4000>;
962				clock-names = "se";
963				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
964				pinctrl-names = "default";
965				pinctrl-0 = <&qup_i2c1_default>;
966				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
967				#address-cells = <1>;
968				#size-cells = <0>;
969				status = "disabled";
970			};
971
972			spi1: spi@884000 {
973				compatible = "qcom,geni-spi";
974				reg = <0 0x884000 0 0x4000>;
975				reg-names = "se";
976				clock-names = "se";
977				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
978				pinctrl-names = "default";
979				pinctrl-0 = <&qup_spi1_default>;
980				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
981				spi-max-frequency = <50000000>;
982				#address-cells = <1>;
983				#size-cells = <0>;
984				status = "disabled";
985			};
986
987			i2c2: i2c@888000 {
988				compatible = "qcom,geni-i2c";
989				reg = <0 0x00888000 0 0x4000>;
990				clock-names = "se";
991				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
992				pinctrl-names = "default";
993				pinctrl-0 = <&qup_i2c2_default>;
994				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
995				#address-cells = <1>;
996				#size-cells = <0>;
997				status = "disabled";
998			};
999
1000			spi2: spi@888000 {
1001				compatible = "qcom,geni-spi";
1002				reg = <0 0x888000 0 0x4000>;
1003				reg-names = "se";
1004				clock-names = "se";
1005				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1006				pinctrl-names = "default";
1007				pinctrl-0 = <&qup_spi2_default>;
1008				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1009				spi-max-frequency = <50000000>;
1010				#address-cells = <1>;
1011				#size-cells = <0>;
1012				status = "disabled";
1013			};
1014
1015			i2c3: i2c@88c000 {
1016				compatible = "qcom,geni-i2c";
1017				reg = <0 0x0088c000 0 0x4000>;
1018				clock-names = "se";
1019				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1020				pinctrl-names = "default";
1021				pinctrl-0 = <&qup_i2c3_default>;
1022				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1023				#address-cells = <1>;
1024				#size-cells = <0>;
1025				status = "disabled";
1026			};
1027
1028			spi3: spi@88c000 {
1029				compatible = "qcom,geni-spi";
1030				reg = <0 0x88c000 0 0x4000>;
1031				reg-names = "se";
1032				clock-names = "se";
1033				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1034				pinctrl-names = "default";
1035				pinctrl-0 = <&qup_spi3_default>;
1036				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1037				spi-max-frequency = <50000000>;
1038				#address-cells = <1>;
1039				#size-cells = <0>;
1040				status = "disabled";
1041			};
1042
1043			i2c4: i2c@890000 {
1044				compatible = "qcom,geni-i2c";
1045				reg = <0 0x00890000 0 0x4000>;
1046				clock-names = "se";
1047				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1048				pinctrl-names = "default";
1049				pinctrl-0 = <&qup_i2c4_default>;
1050				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1051				#address-cells = <1>;
1052				#size-cells = <0>;
1053				status = "disabled";
1054			};
1055
1056			spi4: spi@890000 {
1057				compatible = "qcom,geni-spi";
1058				reg = <0 0x890000 0 0x4000>;
1059				reg-names = "se";
1060				clock-names = "se";
1061				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1062				pinctrl-names = "default";
1063				pinctrl-0 = <&qup_spi4_default>;
1064				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1065				spi-max-frequency = <50000000>;
1066				#address-cells = <1>;
1067				#size-cells = <0>;
1068				status = "disabled";
1069			};
1070
1071			i2c5: i2c@894000 {
1072				compatible = "qcom,geni-i2c";
1073				reg = <0 0x00894000 0 0x4000>;
1074				clock-names = "se";
1075				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1076				pinctrl-names = "default";
1077				pinctrl-0 = <&qup_i2c5_default>;
1078				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1079				#address-cells = <1>;
1080				#size-cells = <0>;
1081				status = "disabled";
1082			};
1083
1084			spi5: spi@894000 {
1085				compatible = "qcom,geni-spi";
1086				reg = <0 0x894000 0 0x4000>;
1087				reg-names = "se";
1088				clock-names = "se";
1089				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1090				pinctrl-names = "default";
1091				pinctrl-0 = <&qup_spi5_default>;
1092				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1093				spi-max-frequency = <50000000>;
1094				#address-cells = <1>;
1095				#size-cells = <0>;
1096				status = "disabled";
1097			};
1098
1099			i2c6: i2c@898000 {
1100				compatible = "qcom,geni-i2c";
1101				reg = <0 0x00898000 0 0x4000>;
1102				clock-names = "se";
1103				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1104				pinctrl-names = "default";
1105				pinctrl-0 = <&qup_i2c6_default>;
1106				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1107				#address-cells = <1>;
1108				#size-cells = <0>;
1109				status = "disabled";
1110			};
1111
1112			spi6: spi@898000 {
1113				compatible = "qcom,geni-spi";
1114				reg = <0 0x898000 0 0x4000>;
1115				reg-names = "se";
1116				clock-names = "se";
1117				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1118				pinctrl-names = "default";
1119				pinctrl-0 = <&qup_spi6_default>;
1120				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1121				spi-max-frequency = <50000000>;
1122				#address-cells = <1>;
1123				#size-cells = <0>;
1124				status = "disabled";
1125			};
1126
1127			i2c7: i2c@89c000 {
1128				compatible = "qcom,geni-i2c";
1129				reg = <0 0x0089c000 0 0x4000>;
1130				clock-names = "se";
1131				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1132				pinctrl-names = "default";
1133				pinctrl-0 = <&qup_i2c7_default>;
1134				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1135				#address-cells = <1>;
1136				#size-cells = <0>;
1137				status = "disabled";
1138			};
1139
1140			spi7: spi@89c000 {
1141				compatible = "qcom,geni-spi";
1142				reg = <0 0x89c000 0 0x4000>;
1143				reg-names = "se";
1144				clock-names = "se";
1145				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1146				pinctrl-names = "default";
1147				pinctrl-0 = <&qup_spi7_default>;
1148				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1149				spi-max-frequency = <50000000>;
1150				#address-cells = <1>;
1151				#size-cells = <0>;
1152				status = "disabled";
1153			};
1154		};
1155
1156		gpi_dma1: dma-controller@a00000 {
1157			compatible = "qcom,sm8150-gpi-dma";
1158			reg = <0 0xa00000 0 0x60000>;
1159			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1160				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1161				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1162				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1163				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1164				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1165				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1166				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1167				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1168				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1169				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1170				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
1171				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
1172			dma-channels = <13>;
1173			dma-channel-mask = <0xfa>;
1174			iommus = <&apps_smmu 0x0616 0x0>;
1175			#dma-cells = <3>;
1176			status = "disabled";
1177		};
1178
1179		qupv3_id_1: geniqup@ac0000 {
1180			compatible = "qcom,geni-se-qup";
1181			reg = <0x0 0x00ac0000 0x0 0x6000>;
1182			clock-names = "m-ahb", "s-ahb";
1183			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1184				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1185			iommus = <&apps_smmu 0x603 0x0>;
1186			#address-cells = <2>;
1187			#size-cells = <2>;
1188			ranges;
1189			status = "disabled";
1190
1191			i2c8: i2c@a80000 {
1192				compatible = "qcom,geni-i2c";
1193				reg = <0 0x00a80000 0 0x4000>;
1194				clock-names = "se";
1195				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1196				pinctrl-names = "default";
1197				pinctrl-0 = <&qup_i2c8_default>;
1198				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1199				#address-cells = <1>;
1200				#size-cells = <0>;
1201				status = "disabled";
1202			};
1203
1204			spi8: spi@a80000 {
1205				compatible = "qcom,geni-spi";
1206				reg = <0 0xa80000 0 0x4000>;
1207				reg-names = "se";
1208				clock-names = "se";
1209				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1210				pinctrl-names = "default";
1211				pinctrl-0 = <&qup_spi8_default>;
1212				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1213				spi-max-frequency = <50000000>;
1214				#address-cells = <1>;
1215				#size-cells = <0>;
1216				status = "disabled";
1217			};
1218
1219			i2c9: i2c@a84000 {
1220				compatible = "qcom,geni-i2c";
1221				reg = <0 0x00a84000 0 0x4000>;
1222				clock-names = "se";
1223				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1224				pinctrl-names = "default";
1225				pinctrl-0 = <&qup_i2c9_default>;
1226				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1227				#address-cells = <1>;
1228				#size-cells = <0>;
1229				status = "disabled";
1230			};
1231
1232			spi9: spi@a84000 {
1233				compatible = "qcom,geni-spi";
1234				reg = <0 0xa84000 0 0x4000>;
1235				reg-names = "se";
1236				clock-names = "se";
1237				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1238				pinctrl-names = "default";
1239				pinctrl-0 = <&qup_spi9_default>;
1240				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1241				spi-max-frequency = <50000000>;
1242				#address-cells = <1>;
1243				#size-cells = <0>;
1244				status = "disabled";
1245			};
1246
1247			i2c10: i2c@a88000 {
1248				compatible = "qcom,geni-i2c";
1249				reg = <0 0x00a88000 0 0x4000>;
1250				clock-names = "se";
1251				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1252				pinctrl-names = "default";
1253				pinctrl-0 = <&qup_i2c10_default>;
1254				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1255				#address-cells = <1>;
1256				#size-cells = <0>;
1257				status = "disabled";
1258			};
1259
1260			spi10: spi@a88000 {
1261				compatible = "qcom,geni-spi";
1262				reg = <0 0xa88000 0 0x4000>;
1263				reg-names = "se";
1264				clock-names = "se";
1265				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1266				pinctrl-names = "default";
1267				pinctrl-0 = <&qup_spi10_default>;
1268				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1269				spi-max-frequency = <50000000>;
1270				#address-cells = <1>;
1271				#size-cells = <0>;
1272				status = "disabled";
1273			};
1274
1275			i2c11: i2c@a8c000 {
1276				compatible = "qcom,geni-i2c";
1277				reg = <0 0x00a8c000 0 0x4000>;
1278				clock-names = "se";
1279				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1280				pinctrl-names = "default";
1281				pinctrl-0 = <&qup_i2c11_default>;
1282				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1283				#address-cells = <1>;
1284				#size-cells = <0>;
1285				status = "disabled";
1286			};
1287
1288			spi11: spi@a8c000 {
1289				compatible = "qcom,geni-spi";
1290				reg = <0 0xa8c000 0 0x4000>;
1291				reg-names = "se";
1292				clock-names = "se";
1293				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1294				pinctrl-names = "default";
1295				pinctrl-0 = <&qup_spi11_default>;
1296				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1297				spi-max-frequency = <50000000>;
1298				#address-cells = <1>;
1299				#size-cells = <0>;
1300				status = "disabled";
1301			};
1302
1303			uart2: serial@a90000 {
1304				compatible = "qcom,geni-debug-uart";
1305				reg = <0x0 0x00a90000 0x0 0x4000>;
1306				clock-names = "se";
1307				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1308				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1309				status = "disabled";
1310			};
1311
1312			i2c12: i2c@a90000 {
1313				compatible = "qcom,geni-i2c";
1314				reg = <0 0x00a90000 0 0x4000>;
1315				clock-names = "se";
1316				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1317				pinctrl-names = "default";
1318				pinctrl-0 = <&qup_i2c12_default>;
1319				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1320				#address-cells = <1>;
1321				#size-cells = <0>;
1322				status = "disabled";
1323			};
1324
1325			spi12: spi@a90000 {
1326				compatible = "qcom,geni-spi";
1327				reg = <0 0xa90000 0 0x4000>;
1328				reg-names = "se";
1329				clock-names = "se";
1330				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1331				pinctrl-names = "default";
1332				pinctrl-0 = <&qup_spi12_default>;
1333				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1334				spi-max-frequency = <50000000>;
1335				#address-cells = <1>;
1336				#size-cells = <0>;
1337				status = "disabled";
1338			};
1339
1340			i2c16: i2c@94000 {
1341				compatible = "qcom,geni-i2c";
1342				reg = <0 0x0094000 0 0x4000>;
1343				clock-names = "se";
1344				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1345				pinctrl-names = "default";
1346				pinctrl-0 = <&qup_i2c16_default>;
1347				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1348				#address-cells = <1>;
1349				#size-cells = <0>;
1350				status = "disabled";
1351			};
1352
1353			spi16: spi@a94000 {
1354				compatible = "qcom,geni-spi";
1355				reg = <0 0xa94000 0 0x4000>;
1356				reg-names = "se";
1357				clock-names = "se";
1358				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1359				pinctrl-names = "default";
1360				pinctrl-0 = <&qup_spi16_default>;
1361				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1362				spi-max-frequency = <50000000>;
1363				#address-cells = <1>;
1364				#size-cells = <0>;
1365				status = "disabled";
1366			};
1367		};
1368
1369		gpi_dma2: dma-controller@c00000 {
1370			compatible = "qcom,sm8150-gpi-dma";
1371			reg = <0 0xc00000 0 0x60000>;
1372			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
1373				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
1374				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
1375				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
1376				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
1377				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
1378				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
1379				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
1380				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
1381				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
1382				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
1383				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
1384				     <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
1385			dma-channels = <13>;
1386			dma-channel-mask = <0xfa>;
1387			iommus = <&apps_smmu 0x07b6 0x0>;
1388			#dma-cells = <3>;
1389			status = "disabled";
1390		};
1391
1392		qupv3_id_2: geniqup@cc0000 {
1393			compatible = "qcom,geni-se-qup";
1394			reg = <0x0 0x00cc0000 0x0 0x6000>;
1395
1396			clock-names = "m-ahb", "s-ahb";
1397			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
1398				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
1399			iommus = <&apps_smmu 0x7a3 0x0>;
1400			#address-cells = <2>;
1401			#size-cells = <2>;
1402			ranges;
1403			status = "disabled";
1404
1405			i2c17: i2c@c80000 {
1406				compatible = "qcom,geni-i2c";
1407				reg = <0 0x00c80000 0 0x4000>;
1408				clock-names = "se";
1409				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
1410				pinctrl-names = "default";
1411				pinctrl-0 = <&qup_i2c17_default>;
1412				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
1413				#address-cells = <1>;
1414				#size-cells = <0>;
1415				status = "disabled";
1416			};
1417
1418			spi17: spi@c80000 {
1419				compatible = "qcom,geni-spi";
1420				reg = <0 0xc80000 0 0x4000>;
1421				reg-names = "se";
1422				clock-names = "se";
1423				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
1424				pinctrl-names = "default";
1425				pinctrl-0 = <&qup_spi17_default>;
1426				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
1427				spi-max-frequency = <50000000>;
1428				#address-cells = <1>;
1429				#size-cells = <0>;
1430				status = "disabled";
1431			};
1432
1433			i2c18: i2c@c84000 {
1434				compatible = "qcom,geni-i2c";
1435				reg = <0 0x00c84000 0 0x4000>;
1436				clock-names = "se";
1437				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1438				pinctrl-names = "default";
1439				pinctrl-0 = <&qup_i2c18_default>;
1440				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1441				#address-cells = <1>;
1442				#size-cells = <0>;
1443				status = "disabled";
1444			};
1445
1446			spi18: spi@c84000 {
1447				compatible = "qcom,geni-spi";
1448				reg = <0 0xc84000 0 0x4000>;
1449				reg-names = "se";
1450				clock-names = "se";
1451				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
1452				pinctrl-names = "default";
1453				pinctrl-0 = <&qup_spi18_default>;
1454				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
1455				spi-max-frequency = <50000000>;
1456				#address-cells = <1>;
1457				#size-cells = <0>;
1458				status = "disabled";
1459			};
1460
1461			i2c19: i2c@c88000 {
1462				compatible = "qcom,geni-i2c";
1463				reg = <0 0x00c88000 0 0x4000>;
1464				clock-names = "se";
1465				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1466				pinctrl-names = "default";
1467				pinctrl-0 = <&qup_i2c19_default>;
1468				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1469				#address-cells = <1>;
1470				#size-cells = <0>;
1471				status = "disabled";
1472			};
1473
1474			spi19: spi@c88000 {
1475				compatible = "qcom,geni-spi";
1476				reg = <0 0xc88000 0 0x4000>;
1477				reg-names = "se";
1478				clock-names = "se";
1479				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
1480				pinctrl-names = "default";
1481				pinctrl-0 = <&qup_spi19_default>;
1482				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
1483				spi-max-frequency = <50000000>;
1484				#address-cells = <1>;
1485				#size-cells = <0>;
1486				status = "disabled";
1487			};
1488
1489			i2c13: i2c@c8c000 {
1490				compatible = "qcom,geni-i2c";
1491				reg = <0 0x00c8c000 0 0x4000>;
1492				clock-names = "se";
1493				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1494				pinctrl-names = "default";
1495				pinctrl-0 = <&qup_i2c13_default>;
1496				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1497				#address-cells = <1>;
1498				#size-cells = <0>;
1499				status = "disabled";
1500			};
1501
1502			spi13: spi@c8c000 {
1503				compatible = "qcom,geni-spi";
1504				reg = <0 0xc8c000 0 0x4000>;
1505				reg-names = "se";
1506				clock-names = "se";
1507				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
1508				pinctrl-names = "default";
1509				pinctrl-0 = <&qup_spi13_default>;
1510				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
1511				spi-max-frequency = <50000000>;
1512				#address-cells = <1>;
1513				#size-cells = <0>;
1514				status = "disabled";
1515			};
1516
1517			i2c14: i2c@c90000 {
1518				compatible = "qcom,geni-i2c";
1519				reg = <0 0x00c90000 0 0x4000>;
1520				clock-names = "se";
1521				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1522				pinctrl-names = "default";
1523				pinctrl-0 = <&qup_i2c14_default>;
1524				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1525				#address-cells = <1>;
1526				#size-cells = <0>;
1527				status = "disabled";
1528			};
1529
1530			spi14: spi@c90000 {
1531				compatible = "qcom,geni-spi";
1532				reg = <0 0xc90000 0 0x4000>;
1533				reg-names = "se";
1534				clock-names = "se";
1535				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1536				pinctrl-names = "default";
1537				pinctrl-0 = <&qup_spi14_default>;
1538				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1539				spi-max-frequency = <50000000>;
1540				#address-cells = <1>;
1541				#size-cells = <0>;
1542				status = "disabled";
1543			};
1544
1545			i2c15: i2c@c94000 {
1546				compatible = "qcom,geni-i2c";
1547				reg = <0 0x00c94000 0 0x4000>;
1548				clock-names = "se";
1549				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1550				pinctrl-names = "default";
1551				pinctrl-0 = <&qup_i2c15_default>;
1552				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1553				#address-cells = <1>;
1554				#size-cells = <0>;
1555				status = "disabled";
1556			};
1557
1558			spi15: spi@c94000 {
1559				compatible = "qcom,geni-spi";
1560				reg = <0 0xc94000 0 0x4000>;
1561				reg-names = "se";
1562				clock-names = "se";
1563				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1564				pinctrl-names = "default";
1565				pinctrl-0 = <&qup_spi15_default>;
1566				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1567				spi-max-frequency = <50000000>;
1568				#address-cells = <1>;
1569				#size-cells = <0>;
1570				status = "disabled";
1571			};
1572		};
1573
1574		config_noc: interconnect@1500000 {
1575			compatible = "qcom,sm8150-config-noc";
1576			reg = <0 0x01500000 0 0x7400>;
1577			#interconnect-cells = <1>;
1578			qcom,bcm-voters = <&apps_bcm_voter>;
1579		};
1580
1581		system_noc: interconnect@1620000 {
1582			compatible = "qcom,sm8150-system-noc";
1583			reg = <0 0x01620000 0 0x19400>;
1584			#interconnect-cells = <1>;
1585			qcom,bcm-voters = <&apps_bcm_voter>;
1586		};
1587
1588		mc_virt: interconnect@163a000 {
1589			compatible = "qcom,sm8150-mc-virt";
1590			reg = <0 0x0163a000 0 0x1000>;
1591			#interconnect-cells = <1>;
1592			qcom,bcm-voters = <&apps_bcm_voter>;
1593		};
1594
1595		aggre1_noc: interconnect@16e0000 {
1596			compatible = "qcom,sm8150-aggre1-noc";
1597			reg = <0 0x016e0000 0 0xd080>;
1598			#interconnect-cells = <1>;
1599			qcom,bcm-voters = <&apps_bcm_voter>;
1600		};
1601
1602		aggre2_noc: interconnect@1700000 {
1603			compatible = "qcom,sm8150-aggre2-noc";
1604			reg = <0 0x01700000 0 0x20000>;
1605			#interconnect-cells = <1>;
1606			qcom,bcm-voters = <&apps_bcm_voter>;
1607		};
1608
1609		compute_noc: interconnect@1720000 {
1610			compatible = "qcom,sm8150-compute-noc";
1611			reg = <0 0x01720000 0 0x7000>;
1612			#interconnect-cells = <1>;
1613			qcom,bcm-voters = <&apps_bcm_voter>;
1614		};
1615
1616		mmss_noc: interconnect@1740000 {
1617			compatible = "qcom,sm8150-mmss-noc";
1618			reg = <0 0x01740000 0 0x1c100>;
1619			#interconnect-cells = <1>;
1620			qcom,bcm-voters = <&apps_bcm_voter>;
1621		};
1622
1623		system-cache-controller@9200000 {
1624			compatible = "qcom,sm8150-llcc";
1625			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
1626			reg-names = "llcc_base", "llcc_broadcast_base";
1627			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
1628		};
1629
1630		ufs_mem_hc: ufshc@1d84000 {
1631			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
1632				     "jedec,ufs-2.0";
1633			reg = <0 0x01d84000 0 0x2500>,
1634			      <0 0x01d90000 0 0x8000>;
1635			reg-names = "std", "ice";
1636			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1637			phys = <&ufs_mem_phy_lanes>;
1638			phy-names = "ufsphy";
1639			lanes-per-direction = <2>;
1640			#reset-cells = <1>;
1641			resets = <&gcc GCC_UFS_PHY_BCR>;
1642			reset-names = "rst";
1643
1644			iommus = <&apps_smmu 0x300 0>;
1645
1646			clock-names =
1647				"core_clk",
1648				"bus_aggr_clk",
1649				"iface_clk",
1650				"core_clk_unipro",
1651				"ref_clk",
1652				"tx_lane0_sync_clk",
1653				"rx_lane0_sync_clk",
1654				"rx_lane1_sync_clk",
1655				"ice_core_clk";
1656			clocks =
1657				<&gcc GCC_UFS_PHY_AXI_CLK>,
1658				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1659				<&gcc GCC_UFS_PHY_AHB_CLK>,
1660				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
1661				<&rpmhcc RPMH_CXO_CLK>,
1662				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
1663				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
1664				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
1665				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
1666			freq-table-hz =
1667				<37500000 300000000>,
1668				<0 0>,
1669				<0 0>,
1670				<37500000 300000000>,
1671				<0 0>,
1672				<0 0>,
1673				<0 0>,
1674				<0 0>,
1675				<0 300000000>;
1676
1677			status = "disabled";
1678		};
1679
1680		ufs_mem_phy: phy@1d87000 {
1681			compatible = "qcom,sm8150-qmp-ufs-phy";
1682			reg = <0 0x01d87000 0 0x1c0>;
1683			#address-cells = <2>;
1684			#size-cells = <2>;
1685			ranges;
1686			clock-names = "ref",
1687				      "ref_aux";
1688			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
1689				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
1690
1691			resets = <&ufs_mem_hc 0>;
1692			reset-names = "ufsphy";
1693			status = "disabled";
1694
1695			ufs_mem_phy_lanes: lanes@1d87400 {
1696				reg = <0 0x01d87400 0 0x108>,
1697				      <0 0x01d87600 0 0x1e0>,
1698				      <0 0x01d87c00 0 0x1dc>,
1699				      <0 0x01d87800 0 0x108>,
1700				      <0 0x01d87a00 0 0x1e0>;
1701				#phy-cells = <0>;
1702			};
1703		};
1704
1705		ipa_virt: interconnect@1e00000 {
1706			compatible = "qcom,sm8150-ipa-virt";
1707			reg = <0 0x01e00000 0 0x1000>;
1708			#interconnect-cells = <1>;
1709			qcom,bcm-voters = <&apps_bcm_voter>;
1710		};
1711
1712		tcsr_mutex_regs: syscon@1f40000 {
1713			compatible = "syscon";
1714			reg = <0x0 0x01f40000 0x0 0x40000>;
1715		};
1716
1717		remoteproc_slpi: remoteproc@2400000 {
1718			compatible = "qcom,sm8150-slpi-pas";
1719			reg = <0x0 0x02400000 0x0 0x4040>;
1720
1721			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
1722					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1723					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1724					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1725					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1726			interrupt-names = "wdog", "fatal", "ready",
1727					  "handover", "stop-ack";
1728
1729			clocks = <&rpmhcc RPMH_CXO_CLK>;
1730			clock-names = "xo";
1731
1732			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
1733					<&rpmhpd 3>,
1734					<&rpmhpd 2>;
1735			power-domain-names = "load_state", "lcx", "lmx";
1736
1737			memory-region = <&slpi_mem>;
1738
1739			qcom,smem-states = <&slpi_smp2p_out 0>;
1740			qcom,smem-state-names = "stop";
1741
1742			status = "disabled";
1743
1744			glink-edge {
1745				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
1746				label = "dsps";
1747				qcom,remote-pid = <3>;
1748				mboxes = <&apss_shared 24>;
1749			};
1750		};
1751
1752		gpu: gpu@2c00000 {
1753			/*
1754			 * note: the amd,imageon compatible makes it possible
1755			 * to use the drm/msm driver without the display node,
1756			 * make sure to remove it when display node is added
1757			 */
1758			compatible = "qcom,adreno-640.1",
1759				     "qcom,adreno",
1760				     "amd,imageon";
1761			#stream-id-cells = <16>;
1762
1763			reg = <0 0x02c00000 0 0x40000>;
1764			reg-names = "kgsl_3d0_reg_memory";
1765
1766			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
1767
1768			iommus = <&adreno_smmu 0 0x401>;
1769
1770			operating-points-v2 = <&gpu_opp_table>;
1771
1772			qcom,gmu = <&gmu>;
1773
1774			status = "disabled";
1775
1776			zap-shader {
1777				memory-region = <&gpu_mem>;
1778			};
1779
1780			/* note: downstream checks gpu binning for 675 Mhz */
1781			gpu_opp_table: opp-table {
1782				compatible = "operating-points-v2";
1783
1784				opp-675000000 {
1785					opp-hz = /bits/ 64 <675000000>;
1786					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
1787				};
1788
1789				opp-585000000 {
1790					opp-hz = /bits/ 64 <585000000>;
1791					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
1792				};
1793
1794				opp-499200000 {
1795					opp-hz = /bits/ 64 <499200000>;
1796					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
1797				};
1798
1799				opp-427000000 {
1800					opp-hz = /bits/ 64 <427000000>;
1801					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
1802				};
1803
1804				opp-345000000 {
1805					opp-hz = /bits/ 64 <345000000>;
1806					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
1807				};
1808
1809				opp-257000000 {
1810					opp-hz = /bits/ 64 <257000000>;
1811					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
1812				};
1813			};
1814		};
1815
1816		gmu: gmu@2c6a000 {
1817			compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
1818
1819			reg = <0 0x02c6a000 0 0x30000>,
1820			      <0 0x0b290000 0 0x10000>,
1821			      <0 0x0b490000 0 0x10000>;
1822			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
1823
1824			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
1825				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
1826			interrupt-names = "hfi", "gmu";
1827
1828			clocks = <&gpucc GPU_CC_AHB_CLK>,
1829				 <&gpucc GPU_CC_CX_GMU_CLK>,
1830				 <&gpucc GPU_CC_CXO_CLK>,
1831				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
1832				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
1833			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
1834
1835			power-domains = <&gpucc GPU_CX_GDSC>,
1836					<&gpucc GPU_GX_GDSC>;
1837			power-domain-names = "cx", "gx";
1838
1839			iommus = <&adreno_smmu 5 0x400>;
1840
1841			operating-points-v2 = <&gmu_opp_table>;
1842
1843			status = "disabled";
1844
1845			gmu_opp_table: opp-table {
1846				compatible = "operating-points-v2";
1847
1848				opp-200000000 {
1849					opp-hz = /bits/ 64 <200000000>;
1850					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
1851				};
1852			};
1853		};
1854
1855		gpucc: clock-controller@2c90000 {
1856			compatible = "qcom,sm8150-gpucc";
1857			reg = <0 0x02c90000 0 0x9000>;
1858			clocks = <&rpmhcc RPMH_CXO_CLK>,
1859				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
1860				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
1861			clock-names = "bi_tcxo",
1862				      "gcc_gpu_gpll0_clk_src",
1863				      "gcc_gpu_gpll0_div_clk_src";
1864			#clock-cells = <1>;
1865			#reset-cells = <1>;
1866			#power-domain-cells = <1>;
1867		};
1868
1869		adreno_smmu: iommu@2ca0000 {
1870			compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
1871			reg = <0 0x02ca0000 0 0x10000>;
1872			#iommu-cells = <2>;
1873			#global-interrupts = <1>;
1874			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
1875				<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
1876				<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
1877				<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
1878				<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
1879				<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
1880				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
1881				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
1882				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
1883			clocks = <&gpucc GPU_CC_AHB_CLK>,
1884				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
1885				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
1886			clock-names = "ahb", "bus", "iface";
1887
1888			power-domains = <&gpucc GPU_CX_GDSC>;
1889		};
1890
1891		tlmm: pinctrl@3100000 {
1892			compatible = "qcom,sm8150-pinctrl";
1893			reg = <0x0 0x03100000 0x0 0x300000>,
1894			      <0x0 0x03500000 0x0 0x300000>,
1895			      <0x0 0x03900000 0x0 0x300000>,
1896			      <0x0 0x03D00000 0x0 0x300000>;
1897			reg-names = "west", "east", "north", "south";
1898			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1899			gpio-ranges = <&tlmm 0 0 176>;
1900			gpio-controller;
1901			#gpio-cells = <2>;
1902			interrupt-controller;
1903			#interrupt-cells = <2>;
1904
1905			qup_i2c0_default: qup-i2c0-default {
1906				mux {
1907					pins = "gpio0", "gpio1";
1908					function = "qup0";
1909				};
1910
1911				config {
1912					pins = "gpio0", "gpio1";
1913					drive-strength = <0x02>;
1914					bias-disable;
1915				};
1916			};
1917
1918			qup_spi0_default: qup-spi0-default {
1919				pins = "gpio0", "gpio1", "gpio2", "gpio3";
1920				function = "qup0";
1921				drive-strength = <6>;
1922				bias-disable;
1923			};
1924
1925			qup_i2c1_default: qup-i2c1-default {
1926				mux {
1927					pins = "gpio114", "gpio115";
1928					function = "qup1";
1929				};
1930
1931				config {
1932					pins = "gpio114", "gpio115";
1933					drive-strength = <0x02>;
1934					bias-disable;
1935				};
1936			};
1937
1938			qup_spi1_default: qup-spi1-default {
1939				pins = "gpio114", "gpio115", "gpio116", "gpio117";
1940				function = "qup1";
1941				drive-strength = <6>;
1942				bias-disable;
1943			};
1944
1945			qup_i2c2_default: qup-i2c2-default {
1946				mux {
1947					pins = "gpio126", "gpio127";
1948					function = "qup2";
1949				};
1950
1951				config {
1952					pins = "gpio126", "gpio127";
1953					drive-strength = <0x02>;
1954					bias-disable;
1955				};
1956			};
1957
1958			qup_spi2_default: qup-spi2-default {
1959				pins = "gpio126", "gpio127", "gpio128", "gpio129";
1960				function = "qup2";
1961				drive-strength = <6>;
1962				bias-disable;
1963			};
1964
1965			qup_i2c3_default: qup-i2c3-default {
1966				mux {
1967					pins = "gpio144", "gpio145";
1968					function = "qup3";
1969				};
1970
1971				config {
1972					pins = "gpio144", "gpio145";
1973					drive-strength = <0x02>;
1974					bias-disable;
1975				};
1976			};
1977
1978			qup_spi3_default: qup-spi3-default {
1979				pins = "gpio144", "gpio145", "gpio146", "gpio147";
1980				function = "qup3";
1981				drive-strength = <6>;
1982				bias-disable;
1983			};
1984
1985			qup_i2c4_default: qup-i2c4-default {
1986				mux {
1987					pins = "gpio51", "gpio52";
1988					function = "qup4";
1989				};
1990
1991				config {
1992					pins = "gpio51", "gpio52";
1993					drive-strength = <0x02>;
1994					bias-disable;
1995				};
1996			};
1997
1998			qup_spi4_default: qup-spi4-default {
1999				pins = "gpio51", "gpio52", "gpio53", "gpio54";
2000				function = "qup4";
2001				drive-strength = <6>;
2002				bias-disable;
2003			};
2004
2005			qup_i2c5_default: qup-i2c5-default {
2006				mux {
2007					pins = "gpio121", "gpio122";
2008					function = "qup5";
2009				};
2010
2011				config {
2012					pins = "gpio121", "gpio122";
2013					drive-strength = <0x02>;
2014					bias-disable;
2015				};
2016			};
2017
2018			qup_spi5_default: qup-spi5-default {
2019				pins = "gpio119", "gpio120", "gpio121", "gpio122";
2020				function = "qup5";
2021				drive-strength = <6>;
2022				bias-disable;
2023			};
2024
2025			qup_i2c6_default: qup-i2c6-default {
2026				mux {
2027					pins = "gpio6", "gpio7";
2028					function = "qup6";
2029				};
2030
2031				config {
2032					pins = "gpio6", "gpio7";
2033					drive-strength = <0x02>;
2034					bias-disable;
2035				};
2036			};
2037
2038			qup_spi6_default: qup-spi6_default {
2039				pins = "gpio4", "gpio5", "gpio6", "gpio7";
2040				function = "qup6";
2041				drive-strength = <6>;
2042				bias-disable;
2043			};
2044
2045			qup_i2c7_default: qup-i2c7-default {
2046				mux {
2047					pins = "gpio98", "gpio99";
2048					function = "qup7";
2049				};
2050
2051				config {
2052					pins = "gpio98", "gpio99";
2053					drive-strength = <0x02>;
2054					bias-disable;
2055				};
2056			};
2057
2058			qup_spi7_default: qup-spi7_default {
2059				pins = "gpio98", "gpio99", "gpio100", "gpio101";
2060				function = "qup7";
2061				drive-strength = <6>;
2062				bias-disable;
2063			};
2064
2065			qup_i2c8_default: qup-i2c8-default {
2066				mux {
2067					pins = "gpio88", "gpio89";
2068					function = "qup8";
2069				};
2070
2071				config {
2072					pins = "gpio88", "gpio89";
2073					drive-strength = <0x02>;
2074					bias-disable;
2075				};
2076			};
2077
2078			qup_spi8_default: qup-spi8-default {
2079				pins = "gpio88", "gpio89", "gpio90", "gpio91";
2080				function = "qup8";
2081				drive-strength = <6>;
2082				bias-disable;
2083			};
2084
2085			qup_i2c9_default: qup-i2c9-default {
2086				mux {
2087					pins = "gpio39", "gpio40";
2088					function = "qup9";
2089				};
2090
2091				config {
2092					pins = "gpio39", "gpio40";
2093					drive-strength = <0x02>;
2094					bias-disable;
2095				};
2096			};
2097
2098			qup_spi9_default: qup-spi9-default {
2099				pins = "gpio39", "gpio40", "gpio41", "gpio42";
2100				function = "qup9";
2101				drive-strength = <6>;
2102				bias-disable;
2103			};
2104
2105			qup_i2c10_default: qup-i2c10-default {
2106				mux {
2107					pins = "gpio9", "gpio10";
2108					function = "qup10";
2109				};
2110
2111				config {
2112					pins = "gpio9", "gpio10";
2113					drive-strength = <0x02>;
2114					bias-disable;
2115				};
2116			};
2117
2118			qup_spi10_default: qup-spi10-default {
2119				pins = "gpio9", "gpio10", "gpio11", "gpio12";
2120				function = "qup10";
2121				drive-strength = <6>;
2122				bias-disable;
2123			};
2124
2125			qup_i2c11_default: qup-i2c11-default {
2126				mux {
2127					pins = "gpio94", "gpio95";
2128					function = "qup11";
2129				};
2130
2131				config {
2132					pins = "gpio94", "gpio95";
2133					drive-strength = <0x02>;
2134					bias-disable;
2135				};
2136			};
2137
2138			qup_spi11_default: qup-spi11-default {
2139				pins = "gpio92", "gpio93", "gpio94", "gpio95";
2140				function = "qup11";
2141				drive-strength = <6>;
2142				bias-disable;
2143			};
2144
2145			qup_i2c12_default: qup-i2c12-default {
2146				mux {
2147					pins = "gpio83", "gpio84";
2148					function = "qup12";
2149				};
2150
2151				config {
2152					pins = "gpio83", "gpio84";
2153					drive-strength = <0x02>;
2154					bias-disable;
2155				};
2156			};
2157
2158			qup_spi12_default: qup-spi12-default {
2159				pins = "gpio83", "gpio84", "gpio85", "gpio86";
2160				function = "qup12";
2161				drive-strength = <6>;
2162				bias-disable;
2163			};
2164
2165			qup_i2c13_default: qup-i2c13-default {
2166				mux {
2167					pins = "gpio43", "gpio44";
2168					function = "qup13";
2169				};
2170
2171				config {
2172					pins = "gpio43", "gpio44";
2173					drive-strength = <0x02>;
2174					bias-disable;
2175				};
2176			};
2177
2178			qup_spi13_default: qup-spi13-default {
2179				pins = "gpio43", "gpio44", "gpio45", "gpio46";
2180				function = "qup13";
2181				drive-strength = <6>;
2182				bias-disable;
2183			};
2184
2185			qup_i2c14_default: qup-i2c14-default {
2186				mux {
2187					pins = "gpio47", "gpio48";
2188					function = "qup14";
2189				};
2190
2191				config {
2192					pins = "gpio47", "gpio48";
2193					drive-strength = <0x02>;
2194					bias-disable;
2195				};
2196			};
2197
2198			qup_spi14_default: qup-spi14-default {
2199				pins = "gpio47", "gpio48", "gpio49", "gpio50";
2200				function = "qup14";
2201				drive-strength = <6>;
2202				bias-disable;
2203			};
2204
2205			qup_i2c15_default: qup-i2c15-default {
2206				mux {
2207					pins = "gpio27", "gpio28";
2208					function = "qup15";
2209				};
2210
2211				config {
2212					pins = "gpio27", "gpio28";
2213					drive-strength = <0x02>;
2214					bias-disable;
2215				};
2216			};
2217
2218			qup_spi15_default: qup-spi15-default {
2219				pins = "gpio27", "gpio28", "gpio29", "gpio30";
2220				function = "qup15";
2221				drive-strength = <6>;
2222				bias-disable;
2223			};
2224
2225			qup_i2c16_default: qup-i2c16-default {
2226				mux {
2227					pins = "gpio86", "gpio85";
2228					function = "qup16";
2229				};
2230
2231				config {
2232					pins = "gpio86", "gpio85";
2233					drive-strength = <0x02>;
2234					bias-disable;
2235				};
2236			};
2237
2238			qup_spi16_default: qup-spi16-default {
2239				pins = "gpio83", "gpio84", "gpio85", "gpio86";
2240				function = "qup16";
2241				drive-strength = <6>;
2242				bias-disable;
2243			};
2244
2245			qup_i2c17_default: qup-i2c17-default {
2246				mux {
2247					pins = "gpio55", "gpio56";
2248					function = "qup17";
2249				};
2250
2251				config {
2252					pins = "gpio55", "gpio56";
2253					drive-strength = <0x02>;
2254					bias-disable;
2255				};
2256			};
2257
2258			qup_spi17_default: qup-spi17-default {
2259				pins = "gpio55", "gpio56", "gpio57", "gpio58";
2260				function = "qup17";
2261				drive-strength = <6>;
2262				bias-disable;
2263			};
2264
2265			qup_i2c18_default: qup-i2c18-default {
2266				mux {
2267					pins = "gpio23", "gpio24";
2268					function = "qup18";
2269				};
2270
2271				config {
2272					pins = "gpio23", "gpio24";
2273					drive-strength = <0x02>;
2274					bias-disable;
2275				};
2276			};
2277
2278			qup_spi18_default: qup-spi18-default {
2279				pins = "gpio23", "gpio24", "gpio25", "gpio26";
2280				function = "qup18";
2281				drive-strength = <6>;
2282				bias-disable;
2283			};
2284
2285			qup_i2c19_default: qup-i2c19-default {
2286				mux {
2287					pins = "gpio57", "gpio58";
2288					function = "qup19";
2289				};
2290
2291				config {
2292					pins = "gpio57", "gpio58";
2293					drive-strength = <0x02>;
2294					bias-disable;
2295				};
2296			};
2297
2298			qup_spi19_default: qup-spi19-default {
2299				pins = "gpio55", "gpio56", "gpio57", "gpio58";
2300				function = "qup19";
2301				drive-strength = <6>;
2302				bias-disable;
2303			};
2304		};
2305
2306		remoteproc_mpss: remoteproc@4080000 {
2307			compatible = "qcom,sm8150-mpss-pas";
2308			reg = <0x0 0x04080000 0x0 0x4040>;
2309
2310			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
2311					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2312					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2313					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2314					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
2315					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
2316			interrupt-names = "wdog", "fatal", "ready", "handover",
2317					  "stop-ack", "shutdown-ack";
2318
2319			clocks = <&rpmhcc RPMH_CXO_CLK>;
2320			clock-names = "xo";
2321
2322			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
2323					<&rpmhpd 7>,
2324					<&rpmhpd 0>;
2325			power-domain-names = "load_state", "cx", "mss";
2326
2327			memory-region = <&mpss_mem>;
2328
2329			qcom,smem-states = <&modem_smp2p_out 0>;
2330			qcom,smem-state-names = "stop";
2331
2332			status = "disabled";
2333
2334			glink-edge {
2335				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
2336				label = "modem";
2337				qcom,remote-pid = <1>;
2338				mboxes = <&apss_shared 12>;
2339			};
2340		};
2341
2342		stm@6002000 {
2343			compatible = "arm,coresight-stm", "arm,primecell";
2344			reg = <0 0x06002000 0 0x1000>,
2345			      <0 0x16280000 0 0x180000>;
2346			reg-names = "stm-base", "stm-stimulus-base";
2347
2348			clocks = <&aoss_qmp>;
2349			clock-names = "apb_pclk";
2350
2351			out-ports {
2352				port {
2353					stm_out: endpoint {
2354						remote-endpoint = <&funnel0_in7>;
2355					};
2356				};
2357			};
2358		};
2359
2360		funnel@6041000 {
2361			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2362			reg = <0 0x06041000 0 0x1000>;
2363
2364			clocks = <&aoss_qmp>;
2365			clock-names = "apb_pclk";
2366
2367			out-ports {
2368				port {
2369					funnel0_out: endpoint {
2370						remote-endpoint = <&merge_funnel_in0>;
2371					};
2372				};
2373			};
2374
2375			in-ports {
2376				#address-cells = <1>;
2377				#size-cells = <0>;
2378
2379				port@7 {
2380					reg = <7>;
2381					funnel0_in7: endpoint {
2382						remote-endpoint = <&stm_out>;
2383					};
2384				};
2385			};
2386		};
2387
2388		funnel@6042000 {
2389			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2390			reg = <0 0x06042000 0 0x1000>;
2391
2392			clocks = <&aoss_qmp>;
2393			clock-names = "apb_pclk";
2394
2395			out-ports {
2396				port {
2397					funnel1_out: endpoint {
2398						remote-endpoint = <&merge_funnel_in1>;
2399					};
2400				};
2401			};
2402
2403			in-ports {
2404				#address-cells = <1>;
2405				#size-cells = <0>;
2406
2407				port@4 {
2408					reg = <4>;
2409					funnel1_in4: endpoint {
2410						remote-endpoint = <&swao_replicator_out>;
2411					};
2412				};
2413			};
2414		};
2415
2416		funnel@6043000 {
2417			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2418			reg = <0 0x06043000 0 0x1000>;
2419
2420			clocks = <&aoss_qmp>;
2421			clock-names = "apb_pclk";
2422
2423			out-ports {
2424				port {
2425					funnel2_out: endpoint {
2426						remote-endpoint = <&merge_funnel_in2>;
2427					};
2428				};
2429			};
2430
2431			in-ports {
2432				#address-cells = <1>;
2433				#size-cells = <0>;
2434
2435				port@2 {
2436					reg = <2>;
2437					funnel2_in2: endpoint {
2438						remote-endpoint = <&apss_merge_funnel_out>;
2439					};
2440				};
2441			};
2442		};
2443
2444		funnel@6045000 {
2445			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2446			reg = <0 0x06045000 0 0x1000>;
2447
2448			clocks = <&aoss_qmp>;
2449			clock-names = "apb_pclk";
2450
2451			out-ports {
2452				port {
2453					merge_funnel_out: endpoint {
2454						remote-endpoint = <&etf_in>;
2455					};
2456				};
2457			};
2458
2459			in-ports {
2460				#address-cells = <1>;
2461				#size-cells = <0>;
2462
2463				port@0 {
2464					reg = <0>;
2465					merge_funnel_in0: endpoint {
2466						remote-endpoint = <&funnel0_out>;
2467					};
2468				};
2469
2470				port@1 {
2471					reg = <1>;
2472					merge_funnel_in1: endpoint {
2473						remote-endpoint = <&funnel1_out>;
2474					};
2475				};
2476
2477				port@2 {
2478					reg = <2>;
2479					merge_funnel_in2: endpoint {
2480						remote-endpoint = <&funnel2_out>;
2481					};
2482				};
2483			};
2484		};
2485
2486		replicator@6046000 {
2487			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2488			reg = <0 0x06046000 0 0x1000>;
2489
2490			clocks = <&aoss_qmp>;
2491			clock-names = "apb_pclk";
2492
2493			out-ports {
2494				#address-cells = <1>;
2495				#size-cells = <0>;
2496
2497				port@0 {
2498					reg = <0>;
2499					replicator_out0: endpoint {
2500						remote-endpoint = <&etr_in>;
2501					};
2502				};
2503
2504				port@1 {
2505					reg = <1>;
2506					replicator_out1: endpoint {
2507						remote-endpoint = <&replicator1_in>;
2508					};
2509				};
2510			};
2511
2512			in-ports {
2513				port {
2514					replicator_in0: endpoint {
2515						remote-endpoint = <&etf_out>;
2516					};
2517				};
2518			};
2519		};
2520
2521		etf@6047000 {
2522			compatible = "arm,coresight-tmc", "arm,primecell";
2523			reg = <0 0x06047000 0 0x1000>;
2524
2525			clocks = <&aoss_qmp>;
2526			clock-names = "apb_pclk";
2527
2528			out-ports {
2529				port {
2530					etf_out: endpoint {
2531						remote-endpoint = <&replicator_in0>;
2532					};
2533				};
2534			};
2535
2536			in-ports {
2537				port {
2538					etf_in: endpoint {
2539						remote-endpoint = <&merge_funnel_out>;
2540					};
2541				};
2542			};
2543		};
2544
2545		etr@6048000 {
2546			compatible = "arm,coresight-tmc", "arm,primecell";
2547			reg = <0 0x06048000 0 0x1000>;
2548			iommus = <&apps_smmu 0x05e0 0x0>;
2549
2550			clocks = <&aoss_qmp>;
2551			clock-names = "apb_pclk";
2552			arm,scatter-gather;
2553
2554			in-ports {
2555				port {
2556					etr_in: endpoint {
2557						remote-endpoint = <&replicator_out0>;
2558					};
2559				};
2560			};
2561		};
2562
2563		replicator@604a000 {
2564			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2565			reg = <0 0x0604a000 0 0x1000>;
2566
2567			clocks = <&aoss_qmp>;
2568			clock-names = "apb_pclk";
2569
2570			out-ports {
2571				#address-cells = <1>;
2572				#size-cells = <0>;
2573
2574				port@1 {
2575					reg = <1>;
2576					replicator1_out: endpoint {
2577						remote-endpoint = <&swao_funnel_in>;
2578					};
2579				};
2580			};
2581
2582			in-ports {
2583				#address-cells = <1>;
2584				#size-cells = <0>;
2585
2586				port@1 {
2587					reg = <1>;
2588					replicator1_in: endpoint {
2589						remote-endpoint = <&replicator_out1>;
2590					};
2591				};
2592			};
2593		};
2594
2595		funnel@6b08000 {
2596			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2597			reg = <0 0x06b08000 0 0x1000>;
2598
2599			clocks = <&aoss_qmp>;
2600			clock-names = "apb_pclk";
2601
2602			out-ports {
2603				port {
2604					swao_funnel_out: endpoint {
2605						remote-endpoint = <&swao_etf_in>;
2606					};
2607				};
2608			};
2609
2610			in-ports {
2611				#address-cells = <1>;
2612				#size-cells = <0>;
2613
2614				port@6 {
2615					reg = <6>;
2616					swao_funnel_in: endpoint {
2617						remote-endpoint = <&replicator1_out>;
2618					};
2619				};
2620			};
2621		};
2622
2623		etf@6b09000 {
2624			compatible = "arm,coresight-tmc", "arm,primecell";
2625			reg = <0 0x06b09000 0 0x1000>;
2626
2627			clocks = <&aoss_qmp>;
2628			clock-names = "apb_pclk";
2629
2630			out-ports {
2631				port {
2632					swao_etf_out: endpoint {
2633						remote-endpoint = <&swao_replicator_in>;
2634					};
2635				};
2636			};
2637
2638			in-ports {
2639				port {
2640					swao_etf_in: endpoint {
2641						remote-endpoint = <&swao_funnel_out>;
2642					};
2643				};
2644			};
2645		};
2646
2647		replicator@6b0a000 {
2648			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2649			reg = <0 0x06b0a000 0 0x1000>;
2650
2651			clocks = <&aoss_qmp>;
2652			clock-names = "apb_pclk";
2653			qcom,replicator-loses-context;
2654
2655			out-ports {
2656				port {
2657					swao_replicator_out: endpoint {
2658						remote-endpoint = <&funnel1_in4>;
2659					};
2660				};
2661			};
2662
2663			in-ports {
2664				port {
2665					swao_replicator_in: endpoint {
2666						remote-endpoint = <&swao_etf_out>;
2667					};
2668				};
2669			};
2670		};
2671
2672		etm@7040000 {
2673			compatible = "arm,coresight-etm4x", "arm,primecell";
2674			reg = <0 0x07040000 0 0x1000>;
2675
2676			cpu = <&CPU0>;
2677
2678			clocks = <&aoss_qmp>;
2679			clock-names = "apb_pclk";
2680			arm,coresight-loses-context-with-cpu;
2681			qcom,skip-power-up;
2682
2683			out-ports {
2684				port {
2685					etm0_out: endpoint {
2686						remote-endpoint = <&apss_funnel_in0>;
2687					};
2688				};
2689			};
2690		};
2691
2692		etm@7140000 {
2693			compatible = "arm,coresight-etm4x", "arm,primecell";
2694			reg = <0 0x07140000 0 0x1000>;
2695
2696			cpu = <&CPU1>;
2697
2698			clocks = <&aoss_qmp>;
2699			clock-names = "apb_pclk";
2700			arm,coresight-loses-context-with-cpu;
2701			qcom,skip-power-up;
2702
2703			out-ports {
2704				port {
2705					etm1_out: endpoint {
2706						remote-endpoint = <&apss_funnel_in1>;
2707					};
2708				};
2709			};
2710		};
2711
2712		etm@7240000 {
2713			compatible = "arm,coresight-etm4x", "arm,primecell";
2714			reg = <0 0x07240000 0 0x1000>;
2715
2716			cpu = <&CPU2>;
2717
2718			clocks = <&aoss_qmp>;
2719			clock-names = "apb_pclk";
2720			arm,coresight-loses-context-with-cpu;
2721			qcom,skip-power-up;
2722
2723			out-ports {
2724				port {
2725					etm2_out: endpoint {
2726						remote-endpoint = <&apss_funnel_in2>;
2727					};
2728				};
2729			};
2730		};
2731
2732		etm@7340000 {
2733			compatible = "arm,coresight-etm4x", "arm,primecell";
2734			reg = <0 0x07340000 0 0x1000>;
2735
2736			cpu = <&CPU3>;
2737
2738			clocks = <&aoss_qmp>;
2739			clock-names = "apb_pclk";
2740			arm,coresight-loses-context-with-cpu;
2741			qcom,skip-power-up;
2742
2743			out-ports {
2744				port {
2745					etm3_out: endpoint {
2746						remote-endpoint = <&apss_funnel_in3>;
2747					};
2748				};
2749			};
2750		};
2751
2752		etm@7440000 {
2753			compatible = "arm,coresight-etm4x", "arm,primecell";
2754			reg = <0 0x07440000 0 0x1000>;
2755
2756			cpu = <&CPU4>;
2757
2758			clocks = <&aoss_qmp>;
2759			clock-names = "apb_pclk";
2760			arm,coresight-loses-context-with-cpu;
2761			qcom,skip-power-up;
2762
2763			out-ports {
2764				port {
2765					etm4_out: endpoint {
2766						remote-endpoint = <&apss_funnel_in4>;
2767					};
2768				};
2769			};
2770		};
2771
2772		etm@7540000 {
2773			compatible = "arm,coresight-etm4x", "arm,primecell";
2774			reg = <0 0x07540000 0 0x1000>;
2775
2776			cpu = <&CPU5>;
2777
2778			clocks = <&aoss_qmp>;
2779			clock-names = "apb_pclk";
2780			arm,coresight-loses-context-with-cpu;
2781			qcom,skip-power-up;
2782
2783			out-ports {
2784				port {
2785					etm5_out: endpoint {
2786						remote-endpoint = <&apss_funnel_in5>;
2787					};
2788				};
2789			};
2790		};
2791
2792		etm@7640000 {
2793			compatible = "arm,coresight-etm4x", "arm,primecell";
2794			reg = <0 0x07640000 0 0x1000>;
2795
2796			cpu = <&CPU6>;
2797
2798			clocks = <&aoss_qmp>;
2799			clock-names = "apb_pclk";
2800			arm,coresight-loses-context-with-cpu;
2801			qcom,skip-power-up;
2802
2803			out-ports {
2804				port {
2805					etm6_out: endpoint {
2806						remote-endpoint = <&apss_funnel_in6>;
2807					};
2808				};
2809			};
2810		};
2811
2812		etm@7740000 {
2813			compatible = "arm,coresight-etm4x", "arm,primecell";
2814			reg = <0 0x07740000 0 0x1000>;
2815
2816			cpu = <&CPU7>;
2817
2818			clocks = <&aoss_qmp>;
2819			clock-names = "apb_pclk";
2820			arm,coresight-loses-context-with-cpu;
2821			qcom,skip-power-up;
2822
2823			out-ports {
2824				port {
2825					etm7_out: endpoint {
2826						remote-endpoint = <&apss_funnel_in7>;
2827					};
2828				};
2829			};
2830		};
2831
2832		funnel@7800000 { /* APSS Funnel */
2833			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2834			reg = <0 0x07800000 0 0x1000>;
2835
2836			clocks = <&aoss_qmp>;
2837			clock-names = "apb_pclk";
2838
2839			out-ports {
2840				port {
2841					apss_funnel_out: endpoint {
2842						remote-endpoint = <&apss_merge_funnel_in>;
2843					};
2844				};
2845			};
2846
2847			in-ports {
2848				#address-cells = <1>;
2849				#size-cells = <0>;
2850
2851				port@0 {
2852					reg = <0>;
2853					apss_funnel_in0: endpoint {
2854						remote-endpoint = <&etm0_out>;
2855					};
2856				};
2857
2858				port@1 {
2859					reg = <1>;
2860					apss_funnel_in1: endpoint {
2861						remote-endpoint = <&etm1_out>;
2862					};
2863				};
2864
2865				port@2 {
2866					reg = <2>;
2867					apss_funnel_in2: endpoint {
2868						remote-endpoint = <&etm2_out>;
2869					};
2870				};
2871
2872				port@3 {
2873					reg = <3>;
2874					apss_funnel_in3: endpoint {
2875						remote-endpoint = <&etm3_out>;
2876					};
2877				};
2878
2879				port@4 {
2880					reg = <4>;
2881					apss_funnel_in4: endpoint {
2882						remote-endpoint = <&etm4_out>;
2883					};
2884				};
2885
2886				port@5 {
2887					reg = <5>;
2888					apss_funnel_in5: endpoint {
2889						remote-endpoint = <&etm5_out>;
2890					};
2891				};
2892
2893				port@6 {
2894					reg = <6>;
2895					apss_funnel_in6: endpoint {
2896						remote-endpoint = <&etm6_out>;
2897					};
2898				};
2899
2900				port@7 {
2901					reg = <7>;
2902					apss_funnel_in7: endpoint {
2903						remote-endpoint = <&etm7_out>;
2904					};
2905				};
2906			};
2907		};
2908
2909		funnel@7810000 {
2910			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2911			reg = <0 0x07810000 0 0x1000>;
2912
2913			clocks = <&aoss_qmp>;
2914			clock-names = "apb_pclk";
2915
2916			out-ports {
2917				port {
2918					apss_merge_funnel_out: endpoint {
2919						remote-endpoint = <&funnel2_in2>;
2920					};
2921				};
2922			};
2923
2924			in-ports {
2925				port {
2926					apss_merge_funnel_in: endpoint {
2927						remote-endpoint = <&apss_funnel_out>;
2928					};
2929				};
2930			};
2931		};
2932
2933		remoteproc_cdsp: remoteproc@8300000 {
2934			compatible = "qcom,sm8150-cdsp-pas";
2935			reg = <0x0 0x08300000 0x0 0x4040>;
2936
2937			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
2938					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2939					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2940					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2941					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
2942			interrupt-names = "wdog", "fatal", "ready",
2943					  "handover", "stop-ack";
2944
2945			clocks = <&rpmhcc RPMH_CXO_CLK>;
2946			clock-names = "xo";
2947
2948			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
2949					<&rpmhpd 7>;
2950			power-domain-names = "load_state", "cx";
2951
2952			memory-region = <&cdsp_mem>;
2953
2954			qcom,smem-states = <&cdsp_smp2p_out 0>;
2955			qcom,smem-state-names = "stop";
2956
2957			status = "disabled";
2958
2959			glink-edge {
2960				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
2961				label = "cdsp";
2962				qcom,remote-pid = <5>;
2963				mboxes = <&apss_shared 4>;
2964			};
2965		};
2966
2967		usb_1_hsphy: phy@88e2000 {
2968			compatible = "qcom,sm8150-usb-hs-phy",
2969				     "qcom,usb-snps-hs-7nm-phy";
2970			reg = <0 0x088e2000 0 0x400>;
2971			status = "disabled";
2972			#phy-cells = <0>;
2973
2974			clocks = <&rpmhcc RPMH_CXO_CLK>;
2975			clock-names = "ref";
2976
2977			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2978		};
2979
2980		usb_2_hsphy: phy@88e3000 {
2981			compatible = "qcom,sm8150-usb-hs-phy",
2982				     "qcom,usb-snps-hs-7nm-phy";
2983			reg = <0 0x088e3000 0 0x400>;
2984			status = "disabled";
2985			#phy-cells = <0>;
2986
2987			clocks = <&rpmhcc RPMH_CXO_CLK>;
2988			clock-names = "ref";
2989
2990			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
2991		};
2992
2993		usb_1_qmpphy: phy@88e9000 {
2994			compatible = "qcom,sm8150-qmp-usb3-phy";
2995			reg = <0 0x088e9000 0 0x18c>,
2996			      <0 0x088e8000 0 0x10>;
2997			reg-names = "reg-base", "dp_com";
2998			status = "disabled";
2999			#address-cells = <2>;
3000			#size-cells = <2>;
3001			ranges;
3002
3003			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
3004				 <&rpmhcc RPMH_CXO_CLK>,
3005				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
3006				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
3007			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
3008
3009			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
3010				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
3011			reset-names = "phy", "common";
3012
3013			usb_1_ssphy: lanes@88e9200 {
3014				reg = <0 0x088e9200 0 0x200>,
3015				      <0 0x088e9400 0 0x200>,
3016				      <0 0x088e9c00 0 0x218>,
3017				      <0 0x088e9600 0 0x200>,
3018				      <0 0x088e9800 0 0x200>,
3019				      <0 0x088e9a00 0 0x100>;
3020				#clock-cells = <0>;
3021				#phy-cells = <0>;
3022				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
3023				clock-names = "pipe0";
3024				clock-output-names = "usb3_phy_pipe_clk_src";
3025			};
3026		};
3027
3028		usb_2_qmpphy: phy@88eb000 {
3029			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
3030			reg = <0 0x088eb000 0 0x200>;
3031			status = "disabled";
3032			#address-cells = <2>;
3033			#size-cells = <2>;
3034			ranges;
3035
3036			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
3037				 <&rpmhcc RPMH_CXO_CLK>,
3038				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
3039				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
3040			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
3041
3042			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
3043				 <&gcc GCC_USB3_PHY_SEC_BCR>;
3044			reset-names = "phy", "common";
3045
3046			usb_2_ssphy: lane@88eb200 {
3047				reg = <0 0x088eb200 0 0x200>,
3048				      <0 0x088eb400 0 0x200>,
3049				      <0 0x088eb800 0 0x800>,
3050				      <0 0x088eb600 0 0x200>;
3051				#clock-cells = <0>;
3052				#phy-cells = <0>;
3053				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
3054				clock-names = "pipe0";
3055				clock-output-names = "usb3_uni_phy_pipe_clk_src";
3056			};
3057		};
3058
3059		dc_noc: interconnect@9160000 {
3060			compatible = "qcom,sm8150-dc-noc";
3061			reg = <0 0x09160000 0 0x3200>;
3062			#interconnect-cells = <1>;
3063			qcom,bcm-voters = <&apps_bcm_voter>;
3064		};
3065
3066		gem_noc: interconnect@9680000 {
3067			compatible = "qcom,sm8150-gem-noc";
3068			reg = <0 0x09680000 0 0x3e200>;
3069			#interconnect-cells = <1>;
3070			qcom,bcm-voters = <&apps_bcm_voter>;
3071		};
3072
3073		usb_1: usb@a6f8800 {
3074			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
3075			reg = <0 0x0a6f8800 0 0x400>;
3076			status = "disabled";
3077			#address-cells = <2>;
3078			#size-cells = <2>;
3079			ranges;
3080			dma-ranges;
3081
3082			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
3083				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
3084				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
3085				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3086				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
3087				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
3088			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
3089				      "sleep", "xo";
3090
3091			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3092					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
3093			assigned-clock-rates = <19200000>, <200000000>;
3094
3095			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
3096				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
3097				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
3098				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
3099			interrupt-names = "hs_phy_irq", "ss_phy_irq",
3100					  "dm_hs_phy_irq", "dp_hs_phy_irq";
3101
3102			power-domains = <&gcc USB30_PRIM_GDSC>;
3103
3104			resets = <&gcc GCC_USB30_PRIM_BCR>;
3105
3106			usb_1_dwc3: dwc3@a600000 {
3107				compatible = "snps,dwc3";
3108				reg = <0 0x0a600000 0 0xcd00>;
3109				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
3110				iommus = <&apps_smmu 0x140 0>;
3111				snps,dis_u2_susphy_quirk;
3112				snps,dis_enblslpm_quirk;
3113				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
3114				phy-names = "usb2-phy", "usb3-phy";
3115			};
3116		};
3117
3118		usb_2: usb@a8f8800 {
3119			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
3120			reg = <0 0x0a8f8800 0 0x400>;
3121			status = "disabled";
3122			#address-cells = <2>;
3123			#size-cells = <2>;
3124			ranges;
3125			dma-ranges;
3126
3127			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
3128				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
3129				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
3130				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
3131				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
3132				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
3133			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
3134				      "sleep", "xo";
3135
3136			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
3137					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
3138			assigned-clock-rates = <19200000>, <200000000>;
3139
3140			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
3141				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
3142				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
3143				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
3144			interrupt-names = "hs_phy_irq", "ss_phy_irq",
3145					  "dm_hs_phy_irq", "dp_hs_phy_irq";
3146
3147			power-domains = <&gcc USB30_SEC_GDSC>;
3148
3149			resets = <&gcc GCC_USB30_SEC_BCR>;
3150
3151			usb_2_dwc3: usb@a800000 {
3152				compatible = "snps,dwc3";
3153				reg = <0 0x0a800000 0 0xcd00>;
3154				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
3155				iommus = <&apps_smmu 0x160 0>;
3156				snps,dis_u2_susphy_quirk;
3157				snps,dis_enblslpm_quirk;
3158				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
3159				phy-names = "usb2-phy", "usb3-phy";
3160			};
3161		};
3162
3163		camnoc_virt: interconnect@ac00000 {
3164			compatible = "qcom,sm8150-camnoc-virt";
3165			reg = <0 0x0ac00000 0 0x1000>;
3166			#interconnect-cells = <1>;
3167			qcom,bcm-voters = <&apps_bcm_voter>;
3168		};
3169
3170		aoss_qmp: power-controller@c300000 {
3171			compatible = "qcom,sm8150-aoss-qmp";
3172			reg = <0x0 0x0c300000 0x0 0x100000>;
3173			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
3174			mboxes = <&apss_shared 0>;
3175
3176			#clock-cells = <0>;
3177			#power-domain-cells = <1>;
3178		};
3179
3180		tsens0: thermal-sensor@c263000 {
3181			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
3182			reg = <0 0x0c263000 0 0x1ff>, /* TM */
3183			      <0 0x0c222000 0 0x1ff>; /* SROT */
3184			#qcom,sensors = <16>;
3185			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3186				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3187			interrupt-names = "uplow", "critical";
3188			#thermal-sensor-cells = <1>;
3189		};
3190
3191		tsens1: thermal-sensor@c265000 {
3192			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
3193			reg = <0 0x0c265000 0 0x1ff>, /* TM */
3194			      <0 0x0c223000 0 0x1ff>; /* SROT */
3195			#qcom,sensors = <8>;
3196			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3197				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3198			interrupt-names = "uplow", "critical";
3199			#thermal-sensor-cells = <1>;
3200		};
3201
3202		spmi_bus: spmi@c440000 {
3203			compatible = "qcom,spmi-pmic-arb";
3204			reg = <0x0 0x0c440000 0x0 0x0001100>,
3205			      <0x0 0x0c600000 0x0 0x2000000>,
3206			      <0x0 0x0e600000 0x0 0x0100000>,
3207			      <0x0 0x0e700000 0x0 0x00a0000>,
3208			      <0x0 0x0c40a000 0x0 0x0026000>;
3209			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3210			interrupt-names = "periph_irq";
3211			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
3212			qcom,ee = <0>;
3213			qcom,channel = <0>;
3214			#address-cells = <2>;
3215			#size-cells = <0>;
3216			interrupt-controller;
3217			#interrupt-cells = <4>;
3218			cell-index = <0>;
3219		};
3220
3221		apps_smmu: iommu@15000000 {
3222			compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
3223			reg = <0 0x15000000 0 0x100000>;
3224			#iommu-cells = <2>;
3225			#global-interrupts = <1>;
3226			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
3227				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
3228				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
3229				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
3230				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
3231				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
3232				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
3233				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
3234				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
3235				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
3236				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
3237				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
3238				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
3239				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
3240				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
3241				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
3242				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
3243				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
3244				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
3245				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
3246				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
3247				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
3248				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
3249				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
3250				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
3251				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
3252				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
3253				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
3254				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
3255				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
3256				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
3257				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
3258				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
3259				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
3260				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
3261				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
3262				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
3263				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
3264				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
3265				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
3266				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
3267				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
3268				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
3269				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
3270				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
3271				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
3272				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
3273				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
3274				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
3275				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
3276				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
3277				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
3278				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
3279				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
3280				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
3281				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
3282				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
3283				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
3284				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
3285				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
3286				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
3287				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
3288				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
3289				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
3290				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
3291				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
3292				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
3293				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
3294				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
3295				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
3296				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
3297				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
3298				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
3299				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
3300				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
3301				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
3302				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
3303				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
3304				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
3305				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
3306				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
3307		};
3308
3309		remoteproc_adsp: remoteproc@17300000 {
3310			compatible = "qcom,sm8150-adsp-pas";
3311			reg = <0x0 0x17300000 0x0 0x4040>;
3312
3313			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
3314					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
3315					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
3316					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
3317					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
3318			interrupt-names = "wdog", "fatal", "ready",
3319					  "handover", "stop-ack";
3320
3321			clocks = <&rpmhcc RPMH_CXO_CLK>;
3322			clock-names = "xo";
3323
3324			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
3325					<&rpmhpd 7>;
3326			power-domain-names = "load_state", "cx";
3327
3328			memory-region = <&adsp_mem>;
3329
3330			qcom,smem-states = <&adsp_smp2p_out 0>;
3331			qcom,smem-state-names = "stop";
3332
3333			status = "disabled";
3334
3335			glink-edge {
3336				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
3337				label = "lpass";
3338				qcom,remote-pid = <2>;
3339				mboxes = <&apss_shared 8>;
3340			};
3341		};
3342
3343		intc: interrupt-controller@17a00000 {
3344			compatible = "arm,gic-v3";
3345			interrupt-controller;
3346			#interrupt-cells = <3>;
3347			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
3348			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
3349			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3350		};
3351
3352		apss_shared: mailbox@17c00000 {
3353			compatible = "qcom,sm8150-apss-shared";
3354			reg = <0x0 0x17c00000 0x0 0x1000>;
3355			#mbox-cells = <1>;
3356		};
3357
3358		watchdog@17c10000 {
3359			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
3360			reg = <0 0x17c10000 0 0x1000>;
3361			clocks = <&sleep_clk>;
3362			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
3363		};
3364
3365		timer@17c20000 {
3366			#address-cells = <2>;
3367			#size-cells = <2>;
3368			ranges;
3369			compatible = "arm,armv7-timer-mem";
3370			reg = <0x0 0x17c20000 0x0 0x1000>;
3371			clock-frequency = <19200000>;
3372
3373			frame@17c21000{
3374				frame-number = <0>;
3375				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
3376					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
3377				reg = <0x0 0x17c21000 0x0 0x1000>,
3378				      <0x0 0x17c22000 0x0 0x1000>;
3379			};
3380
3381			frame@17c23000 {
3382				frame-number = <1>;
3383				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
3384				reg = <0x0 0x17c23000 0x0 0x1000>;
3385				status = "disabled";
3386			};
3387
3388			frame@17c25000 {
3389				frame-number = <2>;
3390				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
3391				reg = <0x0 0x17c25000 0x0 0x1000>;
3392				status = "disabled";
3393			};
3394
3395			frame@17c27000 {
3396				frame-number = <3>;
3397				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
3398				reg = <0x0 0x17c26000 0x0 0x1000>;
3399				status = "disabled";
3400			};
3401
3402			frame@17c29000 {
3403				frame-number = <4>;
3404				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
3405				reg = <0x0 0x17c29000 0x0 0x1000>;
3406				status = "disabled";
3407			};
3408
3409			frame@17c2b000 {
3410				frame-number = <5>;
3411				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
3412				reg = <0x0 0x17c2b000 0x0 0x1000>;
3413				status = "disabled";
3414			};
3415
3416			frame@17c2d000 {
3417				frame-number = <6>;
3418				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
3419				reg = <0x0 0x17c2d000 0x0 0x1000>;
3420				status = "disabled";
3421			};
3422		};
3423
3424		apps_rsc: rsc@18200000 {
3425			label = "apps_rsc";
3426			compatible = "qcom,rpmh-rsc";
3427			reg = <0x0 0x18200000 0x0 0x10000>,
3428			      <0x0 0x18210000 0x0 0x10000>,
3429			      <0x0 0x18220000 0x0 0x10000>;
3430			reg-names = "drv-0", "drv-1", "drv-2";
3431			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
3432				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
3433				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
3434			qcom,tcs-offset = <0xd00>;
3435			qcom,drv-id = <2>;
3436			qcom,tcs-config = <ACTIVE_TCS  2>,
3437					  <SLEEP_TCS   1>,
3438					  <WAKE_TCS    1>,
3439					  <CONTROL_TCS 0>;
3440
3441			rpmhcc: clock-controller {
3442				compatible = "qcom,sm8150-rpmh-clk";
3443				#clock-cells = <1>;
3444				clock-names = "xo";
3445				clocks = <&xo_board>;
3446			};
3447
3448			rpmhpd: power-controller {
3449				compatible = "qcom,sm8150-rpmhpd";
3450				#power-domain-cells = <1>;
3451				operating-points-v2 = <&rpmhpd_opp_table>;
3452
3453				rpmhpd_opp_table: opp-table {
3454					compatible = "operating-points-v2";
3455
3456					rpmhpd_opp_ret: opp1 {
3457						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
3458					};
3459
3460					rpmhpd_opp_min_svs: opp2 {
3461						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
3462					};
3463
3464					rpmhpd_opp_low_svs: opp3 {
3465						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
3466					};
3467
3468					rpmhpd_opp_svs: opp4 {
3469						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
3470					};
3471
3472					rpmhpd_opp_svs_l1: opp5 {
3473						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
3474					};
3475
3476					rpmhpd_opp_svs_l2: opp6 {
3477						opp-level = <224>;
3478					};
3479
3480					rpmhpd_opp_nom: opp7 {
3481						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
3482					};
3483
3484					rpmhpd_opp_nom_l1: opp8 {
3485						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
3486					};
3487
3488					rpmhpd_opp_nom_l2: opp9 {
3489						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
3490					};
3491
3492					rpmhpd_opp_turbo: opp10 {
3493						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
3494					};
3495
3496					rpmhpd_opp_turbo_l1: opp11 {
3497						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
3498					};
3499				};
3500			};
3501
3502			apps_bcm_voter: bcm_voter {
3503				compatible = "qcom,bcm-voter";
3504			};
3505		};
3506
3507		osm_l3: interconnect@18321000 {
3508			compatible = "qcom,sm8150-osm-l3";
3509			reg = <0 0x18321000 0 0x1400>;
3510
3511			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3512			clock-names = "xo", "alternate";
3513
3514			#interconnect-cells = <1>;
3515		};
3516
3517		cpufreq_hw: cpufreq@18323000 {
3518			compatible = "qcom,cpufreq-hw";
3519			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
3520			      <0 0x18327800 0 0x1400>;
3521			reg-names = "freq-domain0", "freq-domain1",
3522				    "freq-domain2";
3523
3524			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
3525			clock-names = "xo", "alternate";
3526
3527			#freq-domain-cells = <1>;
3528		};
3529
3530		wifi: wifi@18800000 {
3531			compatible = "qcom,wcn3990-wifi";
3532			reg = <0 0x18800000 0 0x800000>;
3533			reg-names = "membase";
3534			memory-region = <&wlan_mem>;
3535			clock-names = "cxo_ref_clk_pin", "qdss";
3536			clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>;
3537			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
3538				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
3539				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
3540				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
3541				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
3542				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
3543				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
3544				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
3545				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
3546				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
3547				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
3548				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
3549			iommus = <&apps_smmu 0x0640 0x1>;
3550			status = "disabled";
3551		};
3552	};
3553
3554	timer {
3555		compatible = "arm,armv8-timer";
3556		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
3557			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
3558			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
3559			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
3560	};
3561
3562	thermal-zones {
3563		cpu0-thermal {
3564			polling-delay-passive = <250>;
3565			polling-delay = <1000>;
3566
3567			thermal-sensors = <&tsens0 1>;
3568
3569			trips {
3570				cpu0_alert0: trip-point0 {
3571					temperature = <90000>;
3572					hysteresis = <2000>;
3573					type = "passive";
3574				};
3575
3576				cpu0_alert1: trip-point1 {
3577					temperature = <95000>;
3578					hysteresis = <2000>;
3579					type = "passive";
3580				};
3581
3582				cpu0_crit: cpu_crit {
3583					temperature = <110000>;
3584					hysteresis = <1000>;
3585					type = "critical";
3586				};
3587			};
3588
3589			cooling-maps {
3590				map0 {
3591					trip = <&cpu0_alert0>;
3592					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3593							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3594							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3595							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3596				};
3597				map1 {
3598					trip = <&cpu0_alert1>;
3599					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3600							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3601							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3602							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3603				};
3604			};
3605		};
3606
3607		cpu1-thermal {
3608			polling-delay-passive = <250>;
3609			polling-delay = <1000>;
3610
3611			thermal-sensors = <&tsens0 2>;
3612
3613			trips {
3614				cpu1_alert0: trip-point0 {
3615					temperature = <90000>;
3616					hysteresis = <2000>;
3617					type = "passive";
3618				};
3619
3620				cpu1_alert1: trip-point1 {
3621					temperature = <95000>;
3622					hysteresis = <2000>;
3623					type = "passive";
3624				};
3625
3626				cpu1_crit: cpu_crit {
3627					temperature = <110000>;
3628					hysteresis = <1000>;
3629					type = "critical";
3630				};
3631			};
3632
3633			cooling-maps {
3634				map0 {
3635					trip = <&cpu1_alert0>;
3636					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3637							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3638							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3639							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3640				};
3641				map1 {
3642					trip = <&cpu1_alert1>;
3643					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3644							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3645							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3646							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3647				};
3648			};
3649		};
3650
3651		cpu2-thermal {
3652			polling-delay-passive = <250>;
3653			polling-delay = <1000>;
3654
3655			thermal-sensors = <&tsens0 3>;
3656
3657			trips {
3658				cpu2_alert0: trip-point0 {
3659					temperature = <90000>;
3660					hysteresis = <2000>;
3661					type = "passive";
3662				};
3663
3664				cpu2_alert1: trip-point1 {
3665					temperature = <95000>;
3666					hysteresis = <2000>;
3667					type = "passive";
3668				};
3669
3670				cpu2_crit: cpu_crit {
3671					temperature = <110000>;
3672					hysteresis = <1000>;
3673					type = "critical";
3674				};
3675			};
3676
3677			cooling-maps {
3678				map0 {
3679					trip = <&cpu2_alert0>;
3680					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3681							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3682							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3683							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3684				};
3685				map1 {
3686					trip = <&cpu2_alert1>;
3687					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3688							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3689							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3690							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3691				};
3692			};
3693		};
3694
3695		cpu3-thermal {
3696			polling-delay-passive = <250>;
3697			polling-delay = <1000>;
3698
3699			thermal-sensors = <&tsens0 4>;
3700
3701			trips {
3702				cpu3_alert0: trip-point0 {
3703					temperature = <90000>;
3704					hysteresis = <2000>;
3705					type = "passive";
3706				};
3707
3708				cpu3_alert1: trip-point1 {
3709					temperature = <95000>;
3710					hysteresis = <2000>;
3711					type = "passive";
3712				};
3713
3714				cpu3_crit: cpu_crit {
3715					temperature = <110000>;
3716					hysteresis = <1000>;
3717					type = "critical";
3718				};
3719			};
3720
3721			cooling-maps {
3722				map0 {
3723					trip = <&cpu3_alert0>;
3724					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3725							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3726							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3727							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3728				};
3729				map1 {
3730					trip = <&cpu3_alert1>;
3731					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3732							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3733							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3734							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3735				};
3736			};
3737		};
3738
3739		cpu4-top-thermal {
3740			polling-delay-passive = <250>;
3741			polling-delay = <1000>;
3742
3743			thermal-sensors = <&tsens0 7>;
3744
3745			trips {
3746				cpu4_top_alert0: trip-point0 {
3747					temperature = <90000>;
3748					hysteresis = <2000>;
3749					type = "passive";
3750				};
3751
3752				cpu4_top_alert1: trip-point1 {
3753					temperature = <95000>;
3754					hysteresis = <2000>;
3755					type = "passive";
3756				};
3757
3758				cpu4_top_crit: cpu_crit {
3759					temperature = <110000>;
3760					hysteresis = <1000>;
3761					type = "critical";
3762				};
3763			};
3764
3765			cooling-maps {
3766				map0 {
3767					trip = <&cpu4_top_alert0>;
3768					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3769							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3770							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3771							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3772				};
3773				map1 {
3774					trip = <&cpu4_top_alert1>;
3775					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3776							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3777							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3778							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3779				};
3780			};
3781		};
3782
3783		cpu5-top-thermal {
3784			polling-delay-passive = <250>;
3785			polling-delay = <1000>;
3786
3787			thermal-sensors = <&tsens0 8>;
3788
3789			trips {
3790				cpu5_top_alert0: trip-point0 {
3791					temperature = <90000>;
3792					hysteresis = <2000>;
3793					type = "passive";
3794				};
3795
3796				cpu5_top_alert1: trip-point1 {
3797					temperature = <95000>;
3798					hysteresis = <2000>;
3799					type = "passive";
3800				};
3801
3802				cpu5_top_crit: cpu_crit {
3803					temperature = <110000>;
3804					hysteresis = <1000>;
3805					type = "critical";
3806				};
3807			};
3808
3809			cooling-maps {
3810				map0 {
3811					trip = <&cpu5_top_alert0>;
3812					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3813							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3814							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3815							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3816				};
3817				map1 {
3818					trip = <&cpu5_top_alert1>;
3819					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3820							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3821							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3822							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3823				};
3824			};
3825		};
3826
3827		cpu6-top-thermal {
3828			polling-delay-passive = <250>;
3829			polling-delay = <1000>;
3830
3831			thermal-sensors = <&tsens0 9>;
3832
3833			trips {
3834				cpu6_top_alert0: trip-point0 {
3835					temperature = <90000>;
3836					hysteresis = <2000>;
3837					type = "passive";
3838				};
3839
3840				cpu6_top_alert1: trip-point1 {
3841					temperature = <95000>;
3842					hysteresis = <2000>;
3843					type = "passive";
3844				};
3845
3846				cpu6_top_crit: cpu_crit {
3847					temperature = <110000>;
3848					hysteresis = <1000>;
3849					type = "critical";
3850				};
3851			};
3852
3853			cooling-maps {
3854				map0 {
3855					trip = <&cpu6_top_alert0>;
3856					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3857							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3858							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3859							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3860				};
3861				map1 {
3862					trip = <&cpu6_top_alert1>;
3863					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3864							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3865							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3866							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3867				};
3868			};
3869		};
3870
3871		cpu7-top-thermal {
3872			polling-delay-passive = <250>;
3873			polling-delay = <1000>;
3874
3875			thermal-sensors = <&tsens0 10>;
3876
3877			trips {
3878				cpu7_top_alert0: trip-point0 {
3879					temperature = <90000>;
3880					hysteresis = <2000>;
3881					type = "passive";
3882				};
3883
3884				cpu7_top_alert1: trip-point1 {
3885					temperature = <95000>;
3886					hysteresis = <2000>;
3887					type = "passive";
3888				};
3889
3890				cpu7_top_crit: cpu_crit {
3891					temperature = <110000>;
3892					hysteresis = <1000>;
3893					type = "critical";
3894				};
3895			};
3896
3897			cooling-maps {
3898				map0 {
3899					trip = <&cpu7_top_alert0>;
3900					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3901							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3902							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3903							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3904				};
3905				map1 {
3906					trip = <&cpu7_top_alert1>;
3907					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3908							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3909							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3910							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3911				};
3912			};
3913		};
3914
3915		cpu4-bottom-thermal {
3916			polling-delay-passive = <250>;
3917			polling-delay = <1000>;
3918
3919			thermal-sensors = <&tsens0 11>;
3920
3921			trips {
3922				cpu4_bottom_alert0: trip-point0 {
3923					temperature = <90000>;
3924					hysteresis = <2000>;
3925					type = "passive";
3926				};
3927
3928				cpu4_bottom_alert1: trip-point1 {
3929					temperature = <95000>;
3930					hysteresis = <2000>;
3931					type = "passive";
3932				};
3933
3934				cpu4_bottom_crit: cpu_crit {
3935					temperature = <110000>;
3936					hysteresis = <1000>;
3937					type = "critical";
3938				};
3939			};
3940
3941			cooling-maps {
3942				map0 {
3943					trip = <&cpu4_bottom_alert0>;
3944					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3945							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3946							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3947							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3948				};
3949				map1 {
3950					trip = <&cpu4_bottom_alert1>;
3951					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3952							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3953							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3954							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3955				};
3956			};
3957		};
3958
3959		cpu5-bottom-thermal {
3960			polling-delay-passive = <250>;
3961			polling-delay = <1000>;
3962
3963			thermal-sensors = <&tsens0 12>;
3964
3965			trips {
3966				cpu5_bottom_alert0: trip-point0 {
3967					temperature = <90000>;
3968					hysteresis = <2000>;
3969					type = "passive";
3970				};
3971
3972				cpu5_bottom_alert1: trip-point1 {
3973					temperature = <95000>;
3974					hysteresis = <2000>;
3975					type = "passive";
3976				};
3977
3978				cpu5_bottom_crit: cpu_crit {
3979					temperature = <110000>;
3980					hysteresis = <1000>;
3981					type = "critical";
3982				};
3983			};
3984
3985			cooling-maps {
3986				map0 {
3987					trip = <&cpu5_bottom_alert0>;
3988					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3989							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3990							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3991							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3992				};
3993				map1 {
3994					trip = <&cpu5_bottom_alert1>;
3995					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3996							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3997							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
3998							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3999				};
4000			};
4001		};
4002
4003		cpu6-bottom-thermal {
4004			polling-delay-passive = <250>;
4005			polling-delay = <1000>;
4006
4007			thermal-sensors = <&tsens0 13>;
4008
4009			trips {
4010				cpu6_bottom_alert0: trip-point0 {
4011					temperature = <90000>;
4012					hysteresis = <2000>;
4013					type = "passive";
4014				};
4015
4016				cpu6_bottom_alert1: trip-point1 {
4017					temperature = <95000>;
4018					hysteresis = <2000>;
4019					type = "passive";
4020				};
4021
4022				cpu6_bottom_crit: cpu_crit {
4023					temperature = <110000>;
4024					hysteresis = <1000>;
4025					type = "critical";
4026				};
4027			};
4028
4029			cooling-maps {
4030				map0 {
4031					trip = <&cpu6_bottom_alert0>;
4032					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4033							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4034							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4035							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4036				};
4037				map1 {
4038					trip = <&cpu6_bottom_alert1>;
4039					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4040							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4041							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4042							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4043				};
4044			};
4045		};
4046
4047		cpu7-bottom-thermal {
4048			polling-delay-passive = <250>;
4049			polling-delay = <1000>;
4050
4051			thermal-sensors = <&tsens0 14>;
4052
4053			trips {
4054				cpu7_bottom_alert0: trip-point0 {
4055					temperature = <90000>;
4056					hysteresis = <2000>;
4057					type = "passive";
4058				};
4059
4060				cpu7_bottom_alert1: trip-point1 {
4061					temperature = <95000>;
4062					hysteresis = <2000>;
4063					type = "passive";
4064				};
4065
4066				cpu7_bottom_crit: cpu_crit {
4067					temperature = <110000>;
4068					hysteresis = <1000>;
4069					type = "critical";
4070				};
4071			};
4072
4073			cooling-maps {
4074				map0 {
4075					trip = <&cpu7_bottom_alert0>;
4076					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4077							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4078							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4079							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4080				};
4081				map1 {
4082					trip = <&cpu7_bottom_alert1>;
4083					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4084							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4085							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
4086							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
4087				};
4088			};
4089		};
4090
4091		aoss0-thermal {
4092			polling-delay-passive = <250>;
4093			polling-delay = <1000>;
4094
4095			thermal-sensors = <&tsens0 0>;
4096
4097			trips {
4098				aoss0_alert0: trip-point0 {
4099					temperature = <90000>;
4100					hysteresis = <2000>;
4101					type = "hot";
4102				};
4103			};
4104		};
4105
4106		cluster0-thermal {
4107			polling-delay-passive = <250>;
4108			polling-delay = <1000>;
4109
4110			thermal-sensors = <&tsens0 5>;
4111
4112			trips {
4113				cluster0_alert0: trip-point0 {
4114					temperature = <90000>;
4115					hysteresis = <2000>;
4116					type = "hot";
4117				};
4118				cluster0_crit: cluster0_crit {
4119					temperature = <110000>;
4120					hysteresis = <2000>;
4121					type = "critical";
4122				};
4123			};
4124		};
4125
4126		cluster1-thermal {
4127			polling-delay-passive = <250>;
4128			polling-delay = <1000>;
4129
4130			thermal-sensors = <&tsens0 6>;
4131
4132			trips {
4133				cluster1_alert0: trip-point0 {
4134					temperature = <90000>;
4135					hysteresis = <2000>;
4136					type = "hot";
4137				};
4138				cluster1_crit: cluster1_crit {
4139					temperature = <110000>;
4140					hysteresis = <2000>;
4141					type = "critical";
4142				};
4143			};
4144		};
4145
4146		gpu-thermal-top {
4147			polling-delay-passive = <250>;
4148			polling-delay = <1000>;
4149
4150			thermal-sensors = <&tsens0 15>;
4151
4152			trips {
4153				gpu1_alert0: trip-point0 {
4154					temperature = <90000>;
4155					hysteresis = <2000>;
4156					type = "hot";
4157				};
4158			};
4159		};
4160
4161		aoss1-thermal {
4162			polling-delay-passive = <250>;
4163			polling-delay = <1000>;
4164
4165			thermal-sensors = <&tsens1 0>;
4166
4167			trips {
4168				aoss1_alert0: trip-point0 {
4169					temperature = <90000>;
4170					hysteresis = <2000>;
4171					type = "hot";
4172				};
4173			};
4174		};
4175
4176		wlan-thermal {
4177			polling-delay-passive = <250>;
4178			polling-delay = <1000>;
4179
4180			thermal-sensors = <&tsens1 1>;
4181
4182			trips {
4183				wlan_alert0: trip-point0 {
4184					temperature = <90000>;
4185					hysteresis = <2000>;
4186					type = "hot";
4187				};
4188			};
4189		};
4190
4191		video-thermal {
4192			polling-delay-passive = <250>;
4193			polling-delay = <1000>;
4194
4195			thermal-sensors = <&tsens1 2>;
4196
4197			trips {
4198				video_alert0: trip-point0 {
4199					temperature = <90000>;
4200					hysteresis = <2000>;
4201					type = "hot";
4202				};
4203			};
4204		};
4205
4206		mem-thermal {
4207			polling-delay-passive = <250>;
4208			polling-delay = <1000>;
4209
4210			thermal-sensors = <&tsens1 3>;
4211
4212			trips {
4213				mem_alert0: trip-point0 {
4214					temperature = <90000>;
4215					hysteresis = <2000>;
4216					type = "hot";
4217				};
4218			};
4219		};
4220
4221		q6-hvx-thermal {
4222			polling-delay-passive = <250>;
4223			polling-delay = <1000>;
4224
4225			thermal-sensors = <&tsens1 4>;
4226
4227			trips {
4228				q6_hvx_alert0: trip-point0 {
4229					temperature = <90000>;
4230					hysteresis = <2000>;
4231					type = "hot";
4232				};
4233			};
4234		};
4235
4236		camera-thermal {
4237			polling-delay-passive = <250>;
4238			polling-delay = <1000>;
4239
4240			thermal-sensors = <&tsens1 5>;
4241
4242			trips {
4243				camera_alert0: trip-point0 {
4244					temperature = <90000>;
4245					hysteresis = <2000>;
4246					type = "hot";
4247				};
4248			};
4249		};
4250
4251		compute-thermal {
4252			polling-delay-passive = <250>;
4253			polling-delay = <1000>;
4254
4255			thermal-sensors = <&tsens1 6>;
4256
4257			trips {
4258				compute_alert0: trip-point0 {
4259					temperature = <90000>;
4260					hysteresis = <2000>;
4261					type = "hot";
4262				};
4263			};
4264		};
4265
4266		modem-thermal {
4267			polling-delay-passive = <250>;
4268			polling-delay = <1000>;
4269
4270			thermal-sensors = <&tsens1 7>;
4271
4272			trips {
4273				modem_alert0: trip-point0 {
4274					temperature = <90000>;
4275					hysteresis = <2000>;
4276					type = "hot";
4277				};
4278			};
4279		};
4280
4281		npu-thermal {
4282			polling-delay-passive = <250>;
4283			polling-delay = <1000>;
4284
4285			thermal-sensors = <&tsens1 8>;
4286
4287			trips {
4288				npu_alert0: trip-point0 {
4289					temperature = <90000>;
4290					hysteresis = <2000>;
4291					type = "hot";
4292				};
4293			};
4294		};
4295
4296		modem-vec-thermal {
4297			polling-delay-passive = <250>;
4298			polling-delay = <1000>;
4299
4300			thermal-sensors = <&tsens1 9>;
4301
4302			trips {
4303				modem_vec_alert0: trip-point0 {
4304					temperature = <90000>;
4305					hysteresis = <2000>;
4306					type = "hot";
4307				};
4308			};
4309		};
4310
4311		modem-scl-thermal {
4312			polling-delay-passive = <250>;
4313			polling-delay = <1000>;
4314
4315			thermal-sensors = <&tsens1 10>;
4316
4317			trips {
4318				modem_scl_alert0: trip-point0 {
4319					temperature = <90000>;
4320					hysteresis = <2000>;
4321					type = "hot";
4322				};
4323			};
4324		};
4325
4326		gpu-thermal-bottom {
4327			polling-delay-passive = <250>;
4328			polling-delay = <1000>;
4329
4330			thermal-sensors = <&tsens1 11>;
4331
4332			trips {
4333				gpu2_alert0: trip-point0 {
4334					temperature = <90000>;
4335					hysteresis = <2000>;
4336					type = "hot";
4337				};
4338			};
4339		};
4340	};
4341};
4342