1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * IEEE802.15.4-2003 specification
4 *
5 * Copyright (C) 2007-2012 Siemens AG
6 */
7 #ifndef NET_MAC802154_H
8 #define NET_MAC802154_H
9
10 #include <asm/unaligned.h>
11 #include <net/af_ieee802154.h>
12 #include <linux/ieee802154.h>
13 #include <linux/skbuff.h>
14
15 #include <net/cfg802154.h>
16
17 /**
18 * enum ieee802154_hw_addr_filt_flags - hardware address filtering flags
19 *
20 * The following flags are used to indicate changed address settings from
21 * the stack to the hardware.
22 *
23 * @IEEE802154_AFILT_SADDR_CHANGED: Indicates that the short address will be
24 * change.
25 *
26 * @IEEE802154_AFILT_IEEEADDR_CHANGED: Indicates that the extended address
27 * will be change.
28 *
29 * @IEEE802154_AFILT_PANID_CHANGED: Indicates that the pan id will be change.
30 *
31 * @IEEE802154_AFILT_PANC_CHANGED: Indicates that the address filter will
32 * do frame address filtering as a pan coordinator.
33 */
34 enum ieee802154_hw_addr_filt_flags {
35 IEEE802154_AFILT_SADDR_CHANGED = BIT(0),
36 IEEE802154_AFILT_IEEEADDR_CHANGED = BIT(1),
37 IEEE802154_AFILT_PANID_CHANGED = BIT(2),
38 IEEE802154_AFILT_PANC_CHANGED = BIT(3),
39 };
40
41 /**
42 * struct ieee802154_hw_addr_filt - hardware address filtering settings
43 *
44 * @pan_id: pan_id which should be set to the hardware address filter.
45 *
46 * @short_addr: short_addr which should be set to the hardware address filter.
47 *
48 * @ieee_addr: extended address which should be set to the hardware address
49 * filter.
50 *
51 * @pan_coord: boolean if hardware filtering should be operate as coordinator.
52 */
53 struct ieee802154_hw_addr_filt {
54 __le16 pan_id;
55 __le16 short_addr;
56 __le64 ieee_addr;
57 bool pan_coord;
58 };
59
60 /**
61 * struct ieee802154_hw - ieee802154 hardware
62 *
63 * @extra_tx_headroom: headroom to reserve in each transmit skb for use by the
64 * driver (e.g. for transmit headers.)
65 *
66 * @flags: hardware flags, see &enum ieee802154_hw_flags
67 *
68 * @parent: parent device of the hardware.
69 *
70 * @priv: pointer to private area that was allocated for driver use along with
71 * this structure.
72 *
73 * @phy: This points to the &struct wpan_phy allocated for this 802.15.4 PHY.
74 */
75 struct ieee802154_hw {
76 /* filled by the driver */
77 int extra_tx_headroom;
78 u32 flags;
79 struct device *parent;
80 void *priv;
81
82 /* filled by mac802154 core */
83 struct wpan_phy *phy;
84 };
85
86 /**
87 * enum ieee802154_hw_flags - hardware flags
88 *
89 * These flags are used to indicate hardware capabilities to
90 * the stack. Generally, flags here should have their meaning
91 * done in a way that the simplest hardware doesn't need setting
92 * any particular flags. There are some exceptions to this rule,
93 * however, so you are advised to review these flags carefully.
94 *
95 * @IEEE802154_HW_TX_OMIT_CKSUM: Indicates that xmitter will add FCS on it's
96 * own.
97 *
98 * @IEEE802154_HW_LBT: Indicates that transceiver will support listen before
99 * transmit.
100 *
101 * @IEEE802154_HW_CSMA_PARAMS: Indicates that transceiver will support csma
102 * parameters (max_be, min_be, backoff exponents).
103 *
104 * @IEEE802154_HW_FRAME_RETRIES: Indicates that transceiver will support ARET
105 * frame retries setting.
106 *
107 * @IEEE802154_HW_AFILT: Indicates that transceiver will support hardware
108 * address filter setting.
109 *
110 * @IEEE802154_HW_PROMISCUOUS: Indicates that transceiver will support
111 * promiscuous mode setting.
112 *
113 * @IEEE802154_HW_RX_OMIT_CKSUM: Indicates that receiver omits FCS.
114 *
115 * @IEEE802154_HW_RX_DROP_BAD_CKSUM: Indicates that receiver will not filter
116 * frames with bad checksum.
117 */
118 enum ieee802154_hw_flags {
119 IEEE802154_HW_TX_OMIT_CKSUM = BIT(0),
120 IEEE802154_HW_LBT = BIT(1),
121 IEEE802154_HW_CSMA_PARAMS = BIT(2),
122 IEEE802154_HW_FRAME_RETRIES = BIT(3),
123 IEEE802154_HW_AFILT = BIT(4),
124 IEEE802154_HW_PROMISCUOUS = BIT(5),
125 IEEE802154_HW_RX_OMIT_CKSUM = BIT(6),
126 IEEE802154_HW_RX_DROP_BAD_CKSUM = BIT(7),
127 };
128
129 /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
130 #define IEEE802154_HW_OMIT_CKSUM (IEEE802154_HW_TX_OMIT_CKSUM | \
131 IEEE802154_HW_RX_OMIT_CKSUM)
132
133 /* struct ieee802154_ops - callbacks from mac802154 to the driver
134 *
135 * This structure contains various callbacks that the driver may
136 * handle or, in some cases, must handle, for example to transmit
137 * a frame.
138 *
139 * start: Handler that 802.15.4 module calls for device initialization.
140 * This function is called before the first interface is attached.
141 *
142 * stop: Handler that 802.15.4 module calls for device cleanup.
143 * This function is called after the last interface is removed.
144 *
145 * xmit_sync:
146 * Handler that 802.15.4 module calls for each transmitted frame.
147 * skb cntains the buffer starting from the IEEE 802.15.4 header.
148 * The low-level driver should send the frame based on available
149 * configuration. This is called by a workqueue and useful for
150 * synchronous 802.15.4 drivers.
151 * This function should return zero or negative errno.
152 *
153 * WARNING:
154 * This will be deprecated soon. We don't accept synced xmit callbacks
155 * drivers anymore.
156 *
157 * xmit_async:
158 * Handler that 802.15.4 module calls for each transmitted frame.
159 * skb cntains the buffer starting from the IEEE 802.15.4 header.
160 * The low-level driver should send the frame based on available
161 * configuration.
162 * This function should return zero or negative errno.
163 *
164 * ed: Handler that 802.15.4 module calls for Energy Detection.
165 * This function should place the value for detected energy
166 * (usually device-dependant) in the level pointer and return
167 * either zero or negative errno. Called with pib_lock held.
168 *
169 * set_channel:
170 * Set radio for listening on specific channel.
171 * Set the device for listening on specified channel.
172 * Returns either zero, or negative errno. Called with pib_lock held.
173 *
174 * set_hw_addr_filt:
175 * Set radio for listening on specific address.
176 * Set the device for listening on specified address.
177 * Returns either zero, or negative errno.
178 *
179 * set_txpower:
180 * Set radio transmit power in mBm. Called with pib_lock held.
181 * Returns either zero, or negative errno.
182 *
183 * set_lbt
184 * Enables or disables listen before talk on the device. Called with
185 * pib_lock held.
186 * Returns either zero, or negative errno.
187 *
188 * set_cca_mode
189 * Sets the CCA mode used by the device. Called with pib_lock held.
190 * Returns either zero, or negative errno.
191 *
192 * set_cca_ed_level
193 * Sets the CCA energy detection threshold in mBm. Called with pib_lock
194 * held.
195 * Returns either zero, or negative errno.
196 *
197 * set_csma_params
198 * Sets the CSMA parameter set for the PHY. Called with pib_lock held.
199 * Returns either zero, or negative errno.
200 *
201 * set_frame_retries
202 * Sets the retransmission attempt limit. Called with pib_lock held.
203 * Returns either zero, or negative errno.
204 *
205 * set_promiscuous_mode
206 * Enables or disable promiscuous mode.
207 */
208 struct ieee802154_ops {
209 struct module *owner;
210 int (*start)(struct ieee802154_hw *hw);
211 void (*stop)(struct ieee802154_hw *hw);
212 int (*xmit_sync)(struct ieee802154_hw *hw,
213 struct sk_buff *skb);
214 int (*xmit_async)(struct ieee802154_hw *hw,
215 struct sk_buff *skb);
216 int (*ed)(struct ieee802154_hw *hw, u8 *level);
217 int (*set_channel)(struct ieee802154_hw *hw, u8 page,
218 u8 channel);
219 int (*set_hw_addr_filt)(struct ieee802154_hw *hw,
220 struct ieee802154_hw_addr_filt *filt,
221 unsigned long changed);
222 int (*set_txpower)(struct ieee802154_hw *hw, s32 mbm);
223 int (*set_lbt)(struct ieee802154_hw *hw, bool on);
224 int (*set_cca_mode)(struct ieee802154_hw *hw,
225 const struct wpan_phy_cca *cca);
226 int (*set_cca_ed_level)(struct ieee802154_hw *hw, s32 mbm);
227 int (*set_csma_params)(struct ieee802154_hw *hw,
228 u8 min_be, u8 max_be, u8 retries);
229 int (*set_frame_retries)(struct ieee802154_hw *hw,
230 s8 retries);
231 int (*set_promiscuous_mode)(struct ieee802154_hw *hw,
232 const bool on);
233 };
234
235 /**
236 * ieee802154_get_fc_from_skb - get the frame control field from an skb
237 * @skb: skb where the frame control field will be get from
238 */
ieee802154_get_fc_from_skb(const struct sk_buff * skb)239 static inline __le16 ieee802154_get_fc_from_skb(const struct sk_buff *skb)
240 {
241 __le16 fc;
242
243 /* check if we can fc at skb_mac_header of sk buffer */
244 if (WARN_ON(!skb_mac_header_was_set(skb) ||
245 (skb_tail_pointer(skb) -
246 skb_mac_header(skb)) < IEEE802154_FC_LEN))
247 return cpu_to_le16(0);
248
249 memcpy(&fc, skb_mac_header(skb), IEEE802154_FC_LEN);
250 return fc;
251 }
252
253 /**
254 * ieee802154_skb_dst_pan - get the pointer to destination pan field
255 * @fc: mac header frame control field
256 * @skb: skb where the destination pan pointer will be get from
257 */
ieee802154_skb_dst_pan(__le16 fc,const struct sk_buff * skb)258 static inline unsigned char *ieee802154_skb_dst_pan(__le16 fc,
259 const struct sk_buff *skb)
260 {
261 unsigned char *dst_pan;
262
263 switch (ieee802154_daddr_mode(fc)) {
264 case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE):
265 dst_pan = NULL;
266 break;
267 case cpu_to_le16(IEEE802154_FCTL_DADDR_SHORT):
268 case cpu_to_le16(IEEE802154_FCTL_DADDR_EXTENDED):
269 dst_pan = skb_mac_header(skb) +
270 IEEE802154_FC_LEN +
271 IEEE802154_SEQ_LEN;
272 break;
273 default:
274 WARN_ONCE(1, "invalid addr mode detected");
275 dst_pan = NULL;
276 break;
277 }
278
279 return dst_pan;
280 }
281
282 /**
283 * ieee802154_skb_src_pan - get the pointer to source pan field
284 * @fc: mac header frame control field
285 * @skb: skb where the source pan pointer will be get from
286 */
ieee802154_skb_src_pan(__le16 fc,const struct sk_buff * skb)287 static inline unsigned char *ieee802154_skb_src_pan(__le16 fc,
288 const struct sk_buff *skb)
289 {
290 unsigned char *src_pan;
291
292 switch (ieee802154_saddr_mode(fc)) {
293 case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE):
294 src_pan = NULL;
295 break;
296 case cpu_to_le16(IEEE802154_FCTL_SADDR_SHORT):
297 case cpu_to_le16(IEEE802154_FCTL_SADDR_EXTENDED):
298 /* if intra-pan and source addr mode is non none,
299 * then source pan id is equal destination pan id.
300 */
301 if (ieee802154_is_intra_pan(fc)) {
302 src_pan = ieee802154_skb_dst_pan(fc, skb);
303 break;
304 }
305
306 switch (ieee802154_daddr_mode(fc)) {
307 case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE):
308 src_pan = skb_mac_header(skb) +
309 IEEE802154_FC_LEN +
310 IEEE802154_SEQ_LEN;
311 break;
312 case cpu_to_le16(IEEE802154_FCTL_DADDR_SHORT):
313 src_pan = skb_mac_header(skb) +
314 IEEE802154_FC_LEN +
315 IEEE802154_SEQ_LEN +
316 IEEE802154_PAN_ID_LEN +
317 IEEE802154_SHORT_ADDR_LEN;
318 break;
319 case cpu_to_le16(IEEE802154_FCTL_DADDR_EXTENDED):
320 src_pan = skb_mac_header(skb) +
321 IEEE802154_FC_LEN +
322 IEEE802154_SEQ_LEN +
323 IEEE802154_PAN_ID_LEN +
324 IEEE802154_EXTENDED_ADDR_LEN;
325 break;
326 default:
327 WARN_ONCE(1, "invalid addr mode detected");
328 src_pan = NULL;
329 break;
330 }
331 break;
332 default:
333 WARN_ONCE(1, "invalid addr mode detected");
334 src_pan = NULL;
335 break;
336 }
337
338 return src_pan;
339 }
340
341 /**
342 * ieee802154_skb_is_intra_pan_addressing - checks whenever the mac addressing
343 * is an intra pan communication
344 * @fc: mac header frame control field
345 * @skb: skb where the source and destination pan should be get from
346 */
ieee802154_skb_is_intra_pan_addressing(__le16 fc,const struct sk_buff * skb)347 static inline bool ieee802154_skb_is_intra_pan_addressing(__le16 fc,
348 const struct sk_buff *skb)
349 {
350 unsigned char *dst_pan = ieee802154_skb_dst_pan(fc, skb),
351 *src_pan = ieee802154_skb_src_pan(fc, skb);
352
353 /* if one is NULL is no intra pan addressing */
354 if (!dst_pan || !src_pan)
355 return false;
356
357 return !memcmp(dst_pan, src_pan, IEEE802154_PAN_ID_LEN);
358 }
359
360 /**
361 * ieee802154_be64_to_le64 - copies and convert be64 to le64
362 * @le64_dst: le64 destination pointer
363 * @be64_src: be64 source pointer
364 */
ieee802154_be64_to_le64(void * le64_dst,const void * be64_src)365 static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src)
366 {
367 put_unaligned_le64(get_unaligned_be64(be64_src), le64_dst);
368 }
369
370 /**
371 * ieee802154_le64_to_be64 - copies and convert le64 to be64
372 * @be64_dst: be64 destination pointer
373 * @le64_src: le64 source pointer
374 */
ieee802154_le64_to_be64(void * be64_dst,const void * le64_src)375 static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src)
376 {
377 put_unaligned_be64(get_unaligned_le64(le64_src), be64_dst);
378 }
379
380 /**
381 * ieee802154_le16_to_be16 - copies and convert le16 to be16
382 * @be16_dst: be16 destination pointer
383 * @le16_src: le16 source pointer
384 */
ieee802154_le16_to_be16(void * be16_dst,const void * le16_src)385 static inline void ieee802154_le16_to_be16(void *be16_dst, const void *le16_src)
386 {
387 put_unaligned_be16(get_unaligned_le16(le16_src), be16_dst);
388 }
389
390 /**
391 * ieee802154_be16_to_le16 - copies and convert be16 to le16
392 * @le16_dst: le16 destination pointer
393 * @be16_src: be16 source pointer
394 */
ieee802154_be16_to_le16(void * le16_dst,const void * be16_src)395 static inline void ieee802154_be16_to_le16(void *le16_dst, const void *be16_src)
396 {
397 put_unaligned_le16(get_unaligned_be16(be16_src), le16_dst);
398 }
399
400 /**
401 * ieee802154_alloc_hw - Allocate a new hardware device
402 *
403 * This must be called once for each hardware device. The returned pointer
404 * must be used to refer to this device when calling other functions.
405 * mac802154 allocates a private data area for the driver pointed to by
406 * @priv in &struct ieee802154_hw, the size of this area is given as
407 * @priv_data_len.
408 *
409 * @priv_data_len: length of private data
410 * @ops: callbacks for this device
411 *
412 * Return: A pointer to the new hardware device, or %NULL on error.
413 */
414 struct ieee802154_hw *
415 ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops);
416
417 /**
418 * ieee802154_free_hw - free hardware descriptor
419 *
420 * This function frees everything that was allocated, including the
421 * private data for the driver. You must call ieee802154_unregister_hw()
422 * before calling this function.
423 *
424 * @hw: the hardware to free
425 */
426 void ieee802154_free_hw(struct ieee802154_hw *hw);
427
428 /**
429 * ieee802154_register_hw - Register hardware device
430 *
431 * You must call this function before any other functions in
432 * mac802154. Note that before a hardware can be registered, you
433 * need to fill the contained wpan_phy's information.
434 *
435 * @hw: the device to register as returned by ieee802154_alloc_hw()
436 *
437 * Return: 0 on success. An error code otherwise.
438 */
439 int ieee802154_register_hw(struct ieee802154_hw *hw);
440
441 /**
442 * ieee802154_unregister_hw - Unregister a hardware device
443 *
444 * This function instructs mac802154 to free allocated resources
445 * and unregister netdevices from the networking subsystem.
446 *
447 * @hw: the hardware to unregister
448 */
449 void ieee802154_unregister_hw(struct ieee802154_hw *hw);
450
451 /**
452 * ieee802154_rx_irqsafe - receive frame
453 *
454 * Like ieee802154_rx() but can be called in IRQ context
455 * (internally defers to a tasklet.)
456 *
457 * @hw: the hardware this frame came in on
458 * @skb: the buffer to receive, owned by mac802154 after this call
459 * @lqi: link quality indicator
460 */
461 void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb,
462 u8 lqi);
463 /**
464 * ieee802154_wake_queue - wake ieee802154 queue
465 * @hw: pointer as obtained from ieee802154_alloc_hw().
466 *
467 * Drivers should use this function instead of netif_wake_queue.
468 */
469 void ieee802154_wake_queue(struct ieee802154_hw *hw);
470
471 /**
472 * ieee802154_stop_queue - stop ieee802154 queue
473 * @hw: pointer as obtained from ieee802154_alloc_hw().
474 *
475 * Drivers should use this function instead of netif_stop_queue.
476 */
477 void ieee802154_stop_queue(struct ieee802154_hw *hw);
478
479 /**
480 * ieee802154_xmit_complete - frame transmission complete
481 *
482 * @hw: pointer as obtained from ieee802154_alloc_hw().
483 * @skb: buffer for transmission
484 * @ifs_handling: indicate interframe space handling
485 */
486 void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb,
487 bool ifs_handling);
488
489 #endif /* NET_MAC802154_H */
490
