1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * MFD core driver for Richtek RT5033
4  *
5  * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
6  * Author: Beomho Seo <beomho.seo@samsung.com>
7  */
8 
9 #ifndef __RT5033_PRIVATE_H__
10 #define __RT5033_PRIVATE_H__
11 
12 enum rt5033_reg {
13 	RT5033_REG_CHG_STAT		= 0x00,
14 	RT5033_REG_CHG_CTRL1		= 0x01,
15 	RT5033_REG_CHG_CTRL2		= 0x02,
16 	RT5033_REG_DEVICE_ID		= 0x03,
17 	RT5033_REG_CHG_CTRL3		= 0x04,
18 	RT5033_REG_CHG_CTRL4		= 0x05,
19 	RT5033_REG_CHG_CTRL5		= 0x06,
20 	RT5033_REG_RT_CTRL0		= 0x07,
21 	RT5033_REG_CHG_RESET		= 0x08,
22 	/* Reserved 0x09~0x18 */
23 	RT5033_REG_RT_CTRL1		= 0x19,
24 	/* Reserved 0x1A~0x20 */
25 	RT5033_REG_FLED_FUNCTION1	= 0x21,
26 	RT5033_REG_FLED_FUNCTION2	= 0x22,
27 	RT5033_REG_FLED_STROBE_CTRL1	= 0x23,
28 	RT5033_REG_FLED_STROBE_CTRL2	= 0x24,
29 	RT5033_REG_FLED_CTRL1		= 0x25,
30 	RT5033_REG_FLED_CTRL2		= 0x26,
31 	RT5033_REG_FLED_CTRL3		= 0x27,
32 	RT5033_REG_FLED_CTRL4		= 0x28,
33 	RT5033_REG_FLED_CTRL5		= 0x29,
34 	/* Reserved 0x2A~0x40 */
35 	RT5033_REG_CTRL			= 0x41,
36 	RT5033_REG_BUCK_CTRL		= 0x42,
37 	RT5033_REG_LDO_CTRL		= 0x43,
38 	/* Reserved 0x44~0x46 */
39 	RT5033_REG_MANUAL_RESET_CTRL	= 0x47,
40 	/* Reserved 0x48~0x5F */
41 	RT5033_REG_CHG_IRQ1		= 0x60,
42 	RT5033_REG_CHG_IRQ2		= 0x61,
43 	RT5033_REG_CHG_IRQ3		= 0x62,
44 	RT5033_REG_CHG_IRQ1_CTRL	= 0x63,
45 	RT5033_REG_CHG_IRQ2_CTRL	= 0x64,
46 	RT5033_REG_CHG_IRQ3_CTRL	= 0x65,
47 	RT5033_REG_LED_IRQ_STAT		= 0x66,
48 	RT5033_REG_LED_IRQ_CTRL		= 0x67,
49 	RT5033_REG_PMIC_IRQ_STAT	= 0x68,
50 	RT5033_REG_PMIC_IRQ_CTRL	= 0x69,
51 	RT5033_REG_SHDN_CTRL		= 0x6A,
52 	RT5033_REG_OFF_EVENT		= 0x6B,
53 
54 	RT5033_REG_END,
55 };
56 
57 /* RT5033 Charger state register */
58 #define RT5033_CHG_STAT_MASK		0x20
59 #define RT5033_CHG_STAT_DISCHARGING	0x00
60 #define RT5033_CHG_STAT_FULL		0x10
61 #define RT5033_CHG_STAT_CHARGING	0x20
62 #define RT5033_CHG_STAT_NOT_CHARGING	0x30
63 #define RT5033_CHG_STAT_TYPE_MASK	0x60
64 #define RT5033_CHG_STAT_TYPE_PRE	0x20
65 #define RT5033_CHG_STAT_TYPE_FAST	0x60
66 
67 /* RT5033 CHGCTRL1 register */
68 #define RT5033_CHGCTRL1_IAICR_MASK	0xe0
69 #define RT5033_CHGCTRL1_MODE_MASK	0x01
70 
71 /* RT5033 CHGCTRL2 register */
72 #define RT5033_CHGCTRL2_CV_MASK		0xfc
73 
74 /* RT5033 CHGCTRL3 register */
75 #define RT5033_CHGCTRL3_CFO_EN_MASK	0x40
76 #define RT5033_CHGCTRL3_TIMER_MASK	0x38
77 #define RT5033_CHGCTRL3_TIMER_EN_MASK	0x01
78 
79 /* RT5033 CHGCTRL4 register */
80 #define RT5033_CHGCTRL4_EOC_MASK	0x07
81 #define RT5033_CHGCTRL4_IPREC_MASK	0x18
82 
83 /* RT5033 CHGCTRL5 register */
84 #define RT5033_CHGCTRL5_VPREC_MASK	0x0f
85 #define RT5033_CHGCTRL5_ICHG_MASK	0xf0
86 #define RT5033_CHGCTRL5_ICHG_SHIFT	0x04
87 #define RT5033_CHG_MAX_CURRENT		0x0d
88 
89 /* RT5033 RT CTRL1 register */
90 #define RT5033_RT_CTRL1_UUG_MASK	0x02
91 #define RT5033_RT_HZ_MASK		0x01
92 
93 /* RT5033 control register */
94 #define RT5033_CTRL_FCCM_BUCK_MASK		0x00
95 #define RT5033_CTRL_BUCKOMS_MASK		0x01
96 #define RT5033_CTRL_LDOOMS_MASK			0x02
97 #define RT5033_CTRL_SLDOOMS_MASK		0x03
98 #define RT5033_CTRL_EN_BUCK_MASK		0x04
99 #define RT5033_CTRL_EN_LDO_MASK			0x05
100 #define RT5033_CTRL_EN_SAFE_LDO_MASK		0x06
101 #define RT5033_CTRL_LDO_SLEEP_MASK		0x07
102 
103 /* RT5033 BUCK control register */
104 #define RT5033_BUCK_CTRL_MASK			0x1f
105 
106 /* RT5033 LDO control register */
107 #define RT5033_LDO_CTRL_MASK			0x1f
108 
109 /* RT5033 charger property - model, manufacturer */
110 
111 #define RT5033_CHARGER_MODEL	"RT5033WSC Charger"
112 #define RT5033_MANUFACTURER	"Richtek Technology Corporation"
113 
114 /*
115  * RT5033 charger fast-charge current lmits (as in CHGCTRL1 register),
116  * AICR mode limits the input current for example,
117  * the AIRC 100 mode limits the input current to 100 mA.
118  */
119 #define RT5033_AICR_100_MODE			0x20
120 #define RT5033_AICR_500_MODE			0x40
121 #define RT5033_AICR_700_MODE			0x60
122 #define RT5033_AICR_900_MODE			0x80
123 #define RT5033_AICR_1500_MODE			0xc0
124 #define RT5033_AICR_2000_MODE			0xe0
125 #define RT5033_AICR_MODE_MASK			0xe0
126 
127 /* RT5033 use internal timer need to set time */
128 #define RT5033_FAST_CHARGE_TIMER4		0x00
129 #define RT5033_FAST_CHARGE_TIMER6		0x01
130 #define RT5033_FAST_CHARGE_TIMER8		0x02
131 #define RT5033_FAST_CHARGE_TIMER9		0x03
132 #define RT5033_FAST_CHARGE_TIMER12		0x04
133 #define RT5033_FAST_CHARGE_TIMER14		0x05
134 #define RT5033_FAST_CHARGE_TIMER16		0x06
135 
136 #define RT5033_INT_TIMER_ENABLE			0x01
137 
138 /* RT5033 charger termination enable mask */
139 #define RT5033_TE_ENABLE_MASK			0x08
140 
141 /*
142  * RT5033 charger opa mode. RT50300 have two opa mode charger mode
143  * and boost mode for OTG
144  */
145 
146 #define RT5033_CHARGER_MODE			0x00
147 #define RT5033_BOOST_MODE			0x01
148 
149 /* RT5033 charger termination enable */
150 #define RT5033_TE_ENABLE			0x08
151 
152 /* RT5033 charger CFO enable */
153 #define RT5033_CFO_ENABLE			0x40
154 
155 /* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
156 #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN	3650000U
157 #define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM   25000U
158 #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX	4400000U
159 
160 /* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
161 #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN	350000U
162 #define RT5033_CHARGER_PRE_CURRENT_STEP_NUM	100000U
163 #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX	650000U
164 
165 /* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
166 #define RT5033_CHARGER_FAST_CURRENT_MIN		700000U
167 #define RT5033_CHARGER_FAST_CURRENT_STEP_NUM	100000U
168 #define RT5033_CHARGER_FAST_CURRENT_MAX		2000000U
169 
170 /*
171  * RT5033 charger const-charge end of charger current (
172  * as in CHGCTRL4 register), uA
173  */
174 #define RT5033_CHARGER_EOC_MIN			150000U
175 #define RT5033_CHARGER_EOC_REF			300000U
176 #define RT5033_CHARGER_EOC_STEP_NUM1		50000U
177 #define RT5033_CHARGER_EOC_STEP_NUM2		100000U
178 #define RT5033_CHARGER_EOC_MAX			600000U
179 
180 /*
181  * RT5033 charger pre-charge threshold volt limits
182  * (as in CHGCTRL5 register), uV
183  */
184 
185 #define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN	2300000U
186 #define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM	100000U
187 #define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX	3800000U
188 
189 /*
190  * RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger
191  * circuit.
192  */
193 #define RT5033_CHARGER_UUG_ENABLE		0x02
194 
195 /* RT5033 charger High impedance mode */
196 #define RT5033_CHARGER_HZ_DISABLE		0x00
197 #define RT5033_CHARGER_HZ_ENABLE		0x01
198 
199 /* RT5033 regulator BUCK output voltage uV */
200 #define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
201 #define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
202 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
203 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
204 
205 /* RT5033 regulator LDO output voltage uV */
206 #define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
207 #define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
208 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
209 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
210 
211 /* RT5033 regulator SAFE LDO output voltage uV */
212 #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U
213 
214 enum rt5033_fuel_reg {
215 	RT5033_FUEL_REG_OCV_H		= 0x00,
216 	RT5033_FUEL_REG_OCV_L		= 0x01,
217 	RT5033_FUEL_REG_VBAT_H		= 0x02,
218 	RT5033_FUEL_REG_VBAT_L		= 0x03,
219 	RT5033_FUEL_REG_SOC_H		= 0x04,
220 	RT5033_FUEL_REG_SOC_L		= 0x05,
221 	RT5033_FUEL_REG_CTRL_H		= 0x06,
222 	RT5033_FUEL_REG_CTRL_L		= 0x07,
223 	RT5033_FUEL_REG_CRATE		= 0x08,
224 	RT5033_FUEL_REG_DEVICE_ID	= 0x09,
225 	RT5033_FUEL_REG_AVG_VOLT_H	= 0x0A,
226 	RT5033_FUEL_REG_AVG_VOLT_L	= 0x0B,
227 	RT5033_FUEL_REG_CONFIG_H	= 0x0C,
228 	RT5033_FUEL_REG_CONFIG_L	= 0x0D,
229 	/* Reserved 0x0E~0x0F */
230 	RT5033_FUEL_REG_IRQ_CTRL	= 0x10,
231 	RT5033_FUEL_REG_IRQ_FLAG	= 0x11,
232 	RT5033_FUEL_VMIN		= 0x12,
233 	RT5033_FUEL_SMIN		= 0x13,
234 	/* Reserved 0x14~0x1F */
235 	RT5033_FUEL_VGCOMP1		= 0x20,
236 	RT5033_FUEL_VGCOMP2		= 0x21,
237 	RT5033_FUEL_VGCOMP3		= 0x22,
238 	RT5033_FUEL_VGCOMP4		= 0x23,
239 	/* Reserved 0x24~0xFD */
240 	RT5033_FUEL_MFA_H		= 0xFE,
241 	RT5033_FUEL_MFA_L		= 0xFF,
242 
243 	RT5033_FUEL_REG_END,
244 };
245 
246 /* RT5033 fuel gauge battery present property */
247 #define RT5033_FUEL_BAT_PRESENT		0x02
248 
249 /* RT5033 PMIC interrupts */
250 #define RT5033_PMIC_IRQ_BUCKOCP		2
251 #define RT5033_PMIC_IRQ_BUCKLV		3
252 #define RT5033_PMIC_IRQ_SAFELDOLV	4
253 #define RT5033_PMIC_IRQ_LDOLV		5
254 #define RT5033_PMIC_IRQ_OT		6
255 #define RT5033_PMIC_IRQ_VDDA_UV		7
256 
257 #endif /* __RT5033_PRIVATE_H__ */
258