1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * xHCI host controller driver PCI Bus Glue.
4 *
5 * Copyright (C) 2008 Intel Corp.
6 *
7 * Author: Sarah Sharp
8 * Some code borrowed from the Linux EHCI driver.
9 */
10
11 #include <linux/pci.h>
12 #include <linux/slab.h>
13 #include <linux/module.h>
14 #include <linux/acpi.h>
15 #include <linux/reset.h>
16
17 #include "xhci.h"
18 #include "xhci-trace.h"
19 #include "xhci-pci.h"
20
21 #define SSIC_PORT_NUM 2
22 #define SSIC_PORT_CFG2 0x880c
23 #define SSIC_PORT_CFG2_OFFSET 0x30
24 #define PROG_DONE (1 << 30)
25 #define SSIC_PORT_UNUSED (1 << 31)
26 #define SPARSE_DISABLE_BIT 17
27 #define SPARSE_CNTL_ENABLE 0xC12C
28
29 /* Device for a quirk */
30 #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
31 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
32 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009
33 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
34
35 #define PCI_VENDOR_ID_ETRON 0x1b6f
36 #define PCI_DEVICE_ID_EJ168 0x7023
37
38 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
39 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
40 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1
41 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
42 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
43 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
44 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
45 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
46 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
47 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
48 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5
49 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6
50 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db
51 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4
52 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9
53 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec
54 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0
55 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13
56 #define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af
57 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13
58
59 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
60 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
61 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
62 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
63 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
64 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
65 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
66 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
67
68 static const char hcd_name[] = "xhci_hcd";
69
70 static struct hc_driver __read_mostly xhci_pci_hc_driver;
71
72 static int xhci_pci_setup(struct usb_hcd *hcd);
73
74 static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
75 .reset = xhci_pci_setup,
76 };
77
78 /* called after powerup, by probe or system-pm "wakeup" */
xhci_pci_reinit(struct xhci_hcd * xhci,struct pci_dev * pdev)79 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
80 {
81 /*
82 * TODO: Implement finding debug ports later.
83 * TODO: see if there are any quirks that need to be added to handle
84 * new extended capabilities.
85 */
86
87 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
88 if (!pci_set_mwi(pdev))
89 xhci_dbg(xhci, "MWI active\n");
90
91 xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
92 return 0;
93 }
94
xhci_pci_quirks(struct device * dev,struct xhci_hcd * xhci)95 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
96 {
97 struct pci_dev *pdev = to_pci_dev(dev);
98 struct xhci_driver_data *driver_data;
99 const struct pci_device_id *id;
100
101 id = pci_match_id(pdev->driver->id_table, pdev);
102
103 if (id && id->driver_data) {
104 driver_data = (struct xhci_driver_data *)id->driver_data;
105 xhci->quirks |= driver_data->quirks;
106 }
107
108 /* Look for vendor-specific quirks */
109 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
110 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
111 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
112 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
113 pdev->revision == 0x0) {
114 xhci->quirks |= XHCI_RESET_EP_QUIRK;
115 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
116 "QUIRK: Fresco Logic xHC needs configure"
117 " endpoint cmd after reset endpoint");
118 }
119 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
120 pdev->revision == 0x4) {
121 xhci->quirks |= XHCI_SLOW_SUSPEND;
122 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
123 "QUIRK: Fresco Logic xHC revision %u"
124 "must be suspended extra slowly",
125 pdev->revision);
126 }
127 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
128 xhci->quirks |= XHCI_BROKEN_STREAMS;
129 /* Fresco Logic confirms: all revisions of this chip do not
130 * support MSI, even though some of them claim to in their PCI
131 * capabilities.
132 */
133 xhci->quirks |= XHCI_BROKEN_MSI;
134 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
135 "QUIRK: Fresco Logic revision %u "
136 "has broken MSI implementation",
137 pdev->revision);
138 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
139 }
140
141 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
142 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
143 xhci->quirks |= XHCI_BROKEN_STREAMS;
144
145 if (pdev->vendor == PCI_VENDOR_ID_NEC)
146 xhci->quirks |= XHCI_NEC_HOST;
147
148 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
149 xhci->quirks |= XHCI_AMD_0x96_HOST;
150
151 /* AMD PLL quirk */
152 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
153 xhci->quirks |= XHCI_AMD_PLL_FIX;
154
155 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
156 (pdev->device == 0x145c ||
157 pdev->device == 0x15e0 ||
158 pdev->device == 0x15e1 ||
159 pdev->device == 0x43bb))
160 xhci->quirks |= XHCI_SUSPEND_DELAY;
161
162 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
163 (pdev->device == 0x15e0 || pdev->device == 0x15e1))
164 xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
165
166 if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5)
167 xhci->quirks |= XHCI_DISABLE_SPARSE;
168
169 if (pdev->vendor == PCI_VENDOR_ID_AMD)
170 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
171
172 if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
173 ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
174 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
175 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
176 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
177 xhci->quirks |= XHCI_U2_DISABLE_WAKE;
178
179 if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
180 xhci->quirks |= XHCI_LPM_SUPPORT;
181 xhci->quirks |= XHCI_INTEL_HOST;
182 xhci->quirks |= XHCI_AVOID_BEI;
183 }
184 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
185 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
186 xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
187 xhci->limit_active_eps = 64;
188 xhci->quirks |= XHCI_SW_BW_CHECKING;
189 /*
190 * PPT desktop boards DH77EB and DH77DF will power back on after
191 * a few seconds of being shutdown. The fix for this is to
192 * switch the ports from xHCI to EHCI on shutdown. We can't use
193 * DMI information to find those particular boards (since each
194 * vendor will change the board name), so we have to key off all
195 * PPT chipsets.
196 */
197 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
198 }
199 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
200 (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
201 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
202 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
203 xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
204 }
205 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
206 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
207 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
208 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
209 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
210 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
211 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
212 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI ||
213 pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) {
214 xhci->quirks |= XHCI_PME_STUCK_QUIRK;
215 }
216 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
217 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
218 xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
219 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
220 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
221 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
222 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
223 xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
224 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
225 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
226 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
227 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
228 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
229 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
230 xhci->quirks |= XHCI_MISSING_CAS;
231
232 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
233 (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
234 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
235 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
236 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
237 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
238 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
239 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
240 pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
241 pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI))
242 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
243
244 if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
245 pdev->device == PCI_DEVICE_ID_EJ168) {
246 xhci->quirks |= XHCI_RESET_ON_RESUME;
247 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
248 xhci->quirks |= XHCI_BROKEN_STREAMS;
249 }
250 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
251 pdev->device == 0x0014) {
252 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
253 xhci->quirks |= XHCI_ZERO_64B_REGS;
254 }
255 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
256 pdev->device == 0x0015) {
257 xhci->quirks |= XHCI_RESET_ON_RESUME;
258 xhci->quirks |= XHCI_ZERO_64B_REGS;
259 }
260 if (pdev->vendor == PCI_VENDOR_ID_VIA)
261 xhci->quirks |= XHCI_RESET_ON_RESUME;
262
263 /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
264 if (pdev->vendor == PCI_VENDOR_ID_VIA &&
265 pdev->device == 0x3432)
266 xhci->quirks |= XHCI_BROKEN_STREAMS;
267
268 if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
269 xhci->quirks |= XHCI_LPM_SUPPORT;
270
271 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
272 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
273 xhci->quirks |= XHCI_BROKEN_STREAMS;
274 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
275 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
276 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
277 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
278 (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
279 pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI))
280 xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
281
282 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
283 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
284 xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
285
286 if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
287 xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
288
289 if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
290 pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
291 pdev->device == 0x9026)
292 xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
293
294 if (xhci->quirks & XHCI_RESET_ON_RESUME)
295 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
296 "QUIRK: Resetting on resume");
297 }
298
299 #ifdef CONFIG_ACPI
xhci_pme_acpi_rtd3_enable(struct pci_dev * dev)300 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
301 {
302 static const guid_t intel_dsm_guid =
303 GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
304 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
305 union acpi_object *obj;
306
307 obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
308 NULL);
309 ACPI_FREE(obj);
310 }
311 #else
xhci_pme_acpi_rtd3_enable(struct pci_dev * dev)312 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
313 #endif /* CONFIG_ACPI */
314
315 /* called during probe() after chip reset completes */
xhci_pci_setup(struct usb_hcd * hcd)316 static int xhci_pci_setup(struct usb_hcd *hcd)
317 {
318 struct xhci_hcd *xhci;
319 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
320 int retval;
321
322 xhci = hcd_to_xhci(hcd);
323 if (!xhci->sbrn)
324 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
325
326 /* imod_interval is the interrupt moderation value in nanoseconds. */
327 xhci->imod_interval = 40000;
328
329 retval = xhci_gen_setup(hcd, xhci_pci_quirks);
330 if (retval)
331 return retval;
332
333 if (!usb_hcd_is_primary_hcd(hcd))
334 return 0;
335
336 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
337 xhci_pme_acpi_rtd3_enable(pdev);
338
339 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
340
341 /* Find any debug ports */
342 return xhci_pci_reinit(xhci, pdev);
343 }
344
345 /*
346 * We need to register our own PCI probe function (instead of the USB core's
347 * function) in order to create a second roothub under xHCI.
348 */
xhci_pci_probe(struct pci_dev * dev,const struct pci_device_id * id)349 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
350 {
351 int retval;
352 struct xhci_hcd *xhci;
353 struct usb_hcd *hcd;
354 struct xhci_driver_data *driver_data;
355 struct reset_control *reset;
356
357 driver_data = (struct xhci_driver_data *)id->driver_data;
358 if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
359 retval = renesas_xhci_check_request_fw(dev, id);
360 if (retval)
361 return retval;
362 }
363
364 reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
365 if (IS_ERR(reset))
366 return PTR_ERR(reset);
367 reset_control_reset(reset);
368
369 /* Prevent runtime suspending between USB-2 and USB-3 initialization */
370 pm_runtime_get_noresume(&dev->dev);
371
372 /* Register the USB 2.0 roothub.
373 * FIXME: USB core must know to register the USB 2.0 roothub first.
374 * This is sort of silly, because we could just set the HCD driver flags
375 * to say USB 2.0, but I'm not sure what the implications would be in
376 * the other parts of the HCD code.
377 */
378 retval = usb_hcd_pci_probe(dev, id, &xhci_pci_hc_driver);
379
380 if (retval)
381 goto put_runtime_pm;
382
383 /* USB 2.0 roothub is stored in the PCI device now. */
384 hcd = dev_get_drvdata(&dev->dev);
385 xhci = hcd_to_xhci(hcd);
386 xhci->reset = reset;
387 xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
388 pci_name(dev), hcd);
389 if (!xhci->shared_hcd) {
390 retval = -ENOMEM;
391 goto dealloc_usb2_hcd;
392 }
393
394 retval = xhci_ext_cap_init(xhci);
395 if (retval)
396 goto put_usb3_hcd;
397
398 retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
399 IRQF_SHARED);
400 if (retval)
401 goto put_usb3_hcd;
402 /* Roothub already marked as USB 3.0 speed */
403
404 if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
405 HCC_MAX_PSA(xhci->hcc_params) >= 4)
406 xhci->shared_hcd->can_do_streams = 1;
407
408 /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
409 pm_runtime_put_noidle(&dev->dev);
410
411 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
412 pm_runtime_allow(&dev->dev);
413
414 return 0;
415
416 put_usb3_hcd:
417 usb_put_hcd(xhci->shared_hcd);
418 dealloc_usb2_hcd:
419 usb_hcd_pci_remove(dev);
420 put_runtime_pm:
421 pm_runtime_put_noidle(&dev->dev);
422 return retval;
423 }
424
xhci_pci_remove(struct pci_dev * dev)425 static void xhci_pci_remove(struct pci_dev *dev)
426 {
427 struct xhci_hcd *xhci;
428
429 xhci = hcd_to_xhci(pci_get_drvdata(dev));
430 if (xhci->quirks & XHCI_RENESAS_FW_QUIRK)
431 renesas_xhci_pci_exit(dev);
432
433 xhci->xhc_state |= XHCI_STATE_REMOVING;
434
435 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
436 pm_runtime_forbid(&dev->dev);
437
438 if (xhci->shared_hcd) {
439 usb_remove_hcd(xhci->shared_hcd);
440 usb_put_hcd(xhci->shared_hcd);
441 xhci->shared_hcd = NULL;
442 }
443
444 /* Workaround for spurious wakeups at shutdown with HSW */
445 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
446 pci_set_power_state(dev, PCI_D3hot);
447
448 usb_hcd_pci_remove(dev);
449 }
450
451 #ifdef CONFIG_PM
452 /*
453 * In some Intel xHCI controllers, in order to get D3 working,
454 * through a vendor specific SSIC CONFIG register at offset 0x883c,
455 * SSIC PORT need to be marked as "unused" before putting xHCI
456 * into D3. After D3 exit, the SSIC port need to be marked as "used".
457 * Without this change, xHCI might not enter D3 state.
458 */
xhci_ssic_port_unused_quirk(struct usb_hcd * hcd,bool suspend)459 static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
460 {
461 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
462 u32 val;
463 void __iomem *reg;
464 int i;
465
466 for (i = 0; i < SSIC_PORT_NUM; i++) {
467 reg = (void __iomem *) xhci->cap_regs +
468 SSIC_PORT_CFG2 +
469 i * SSIC_PORT_CFG2_OFFSET;
470
471 /* Notify SSIC that SSIC profile programming is not done. */
472 val = readl(reg) & ~PROG_DONE;
473 writel(val, reg);
474
475 /* Mark SSIC port as unused(suspend) or used(resume) */
476 val = readl(reg);
477 if (suspend)
478 val |= SSIC_PORT_UNUSED;
479 else
480 val &= ~SSIC_PORT_UNUSED;
481 writel(val, reg);
482
483 /* Notify SSIC that SSIC profile programming is done */
484 val = readl(reg) | PROG_DONE;
485 writel(val, reg);
486 readl(reg);
487 }
488 }
489
490 /*
491 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
492 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
493 */
xhci_pme_quirk(struct usb_hcd * hcd)494 static void xhci_pme_quirk(struct usb_hcd *hcd)
495 {
496 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
497 void __iomem *reg;
498 u32 val;
499
500 reg = (void __iomem *) xhci->cap_regs + 0x80a4;
501 val = readl(reg);
502 writel(val | BIT(28), reg);
503 readl(reg);
504 }
505
xhci_sparse_control_quirk(struct usb_hcd * hcd)506 static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
507 {
508 u32 reg;
509
510 reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
511 reg &= ~BIT(SPARSE_DISABLE_BIT);
512 writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
513 }
514
xhci_pci_suspend(struct usb_hcd * hcd,bool do_wakeup)515 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
516 {
517 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
518 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
519 int ret;
520
521 /*
522 * Systems with the TI redriver that loses port status change events
523 * need to have the registers polled during D3, so avoid D3cold.
524 */
525 if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
526 pci_d3cold_disable(pdev);
527
528 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
529 xhci_pme_quirk(hcd);
530
531 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
532 xhci_ssic_port_unused_quirk(hcd, true);
533
534 if (xhci->quirks & XHCI_DISABLE_SPARSE)
535 xhci_sparse_control_quirk(hcd);
536
537 ret = xhci_suspend(xhci, do_wakeup);
538 if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
539 xhci_ssic_port_unused_quirk(hcd, false);
540
541 return ret;
542 }
543
xhci_pci_resume(struct usb_hcd * hcd,bool hibernated)544 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
545 {
546 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
547 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
548 int retval = 0;
549
550 reset_control_reset(xhci->reset);
551
552 /* The BIOS on systems with the Intel Panther Point chipset may or may
553 * not support xHCI natively. That means that during system resume, it
554 * may switch the ports back to EHCI so that users can use their
555 * keyboard to select a kernel from GRUB after resume from hibernate.
556 *
557 * The BIOS is supposed to remember whether the OS had xHCI ports
558 * enabled before resume, and switch the ports back to xHCI when the
559 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
560 * writers.
561 *
562 * Unconditionally switch the ports back to xHCI after a system resume.
563 * It should not matter whether the EHCI or xHCI controller is
564 * resumed first. It's enough to do the switchover in xHCI because
565 * USB core won't notice anything as the hub driver doesn't start
566 * running again until after all the devices (including both EHCI and
567 * xHCI host controllers) have been resumed.
568 */
569
570 if (pdev->vendor == PCI_VENDOR_ID_INTEL)
571 usb_enable_intel_xhci_ports(pdev);
572
573 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
574 xhci_ssic_port_unused_quirk(hcd, false);
575
576 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
577 xhci_pme_quirk(hcd);
578
579 retval = xhci_resume(xhci, hibernated);
580 return retval;
581 }
582
xhci_pci_shutdown(struct usb_hcd * hcd)583 static void xhci_pci_shutdown(struct usb_hcd *hcd)
584 {
585 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
586 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
587
588 xhci_shutdown(hcd);
589
590 /* Yet another workaround for spurious wakeups at shutdown with HSW */
591 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
592 pci_set_power_state(pdev, PCI_D3hot);
593 }
594 #endif /* CONFIG_PM */
595
596 /*-------------------------------------------------------------------------*/
597
598 static const struct xhci_driver_data reneses_data = {
599 .quirks = XHCI_RENESAS_FW_QUIRK,
600 .firmware = "renesas_usb_fw.mem",
601 };
602
603 /* PCI driver selection metadata; PCI hotplugging uses this */
604 static const struct pci_device_id pci_ids[] = {
605 { PCI_DEVICE(0x1912, 0x0014),
606 .driver_data = (unsigned long)&reneses_data,
607 },
608 { PCI_DEVICE(0x1912, 0x0015),
609 .driver_data = (unsigned long)&reneses_data,
610 },
611 /* handle any USB 3.0 xHCI controller */
612 { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
613 },
614 { /* end: all zeroes */ }
615 };
616 MODULE_DEVICE_TABLE(pci, pci_ids);
617 MODULE_FIRMWARE("renesas_usb_fw.mem");
618
619 /* pci driver glue; this is a "new style" PCI driver module */
620 static struct pci_driver xhci_pci_driver = {
621 .name = hcd_name,
622 .id_table = pci_ids,
623
624 .probe = xhci_pci_probe,
625 .remove = xhci_pci_remove,
626 /* suspend and resume implemented later */
627
628 .shutdown = usb_hcd_pci_shutdown,
629 #ifdef CONFIG_PM
630 .driver = {
631 .pm = &usb_hcd_pci_pm_ops
632 },
633 #endif
634 };
635
xhci_pci_init(void)636 static int __init xhci_pci_init(void)
637 {
638 xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
639 #ifdef CONFIG_PM
640 xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
641 xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
642 xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
643 #endif
644 return pci_register_driver(&xhci_pci_driver);
645 }
646 module_init(xhci_pci_init);
647
xhci_pci_exit(void)648 static void __exit xhci_pci_exit(void)
649 {
650 pci_unregister_driver(&xhci_pci_driver);
651 }
652 module_exit(xhci_pci_exit);
653
654 MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
655 MODULE_LICENSE("GPL");
656
