1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _NB8800_H_ 3 #define _NB8800_H_ 4 5 #include <linux/types.h> 6 #include <linux/skbuff.h> 7 #include <linux/phy.h> 8 #include <linux/clk.h> 9 #include <linux/bitops.h> 10 11 #define RX_DESC_COUNT 256 12 #define TX_DESC_COUNT 256 13 14 #define NB8800_DESC_LOW 4 15 16 #define RX_BUF_SIZE 1552 17 18 #define RX_COPYBREAK 256 19 #define RX_COPYHDR 128 20 21 #define MAX_MDC_CLOCK 2500000 22 23 /* Stargate Solutions SSN8800 core registers */ 24 #define NB8800_TX_CTL1 0x000 25 #define TX_TPD BIT(5) 26 #define TX_APPEND_FCS BIT(4) 27 #define TX_PAD_EN BIT(3) 28 #define TX_RETRY_EN BIT(2) 29 #define TX_EN BIT(0) 30 31 #define NB8800_TX_CTL2 0x001 32 33 #define NB8800_RX_CTL 0x004 34 #define RX_BC_DISABLE BIT(7) 35 #define RX_RUNT BIT(6) 36 #define RX_AF_EN BIT(5) 37 #define RX_PAUSE_EN BIT(3) 38 #define RX_SEND_CRC BIT(2) 39 #define RX_PAD_STRIP BIT(1) 40 #define RX_EN BIT(0) 41 42 #define NB8800_RANDOM_SEED 0x008 43 #define NB8800_TX_SDP 0x14 44 #define NB8800_TX_TPDP1 0x18 45 #define NB8800_TX_TPDP2 0x19 46 #define NB8800_SLOT_TIME 0x1c 47 48 #define NB8800_MDIO_CMD 0x020 49 #define MDIO_CMD_GO BIT(31) 50 #define MDIO_CMD_WR BIT(26) 51 #define MDIO_CMD_ADDR(x) ((x) << 21) 52 #define MDIO_CMD_REG(x) ((x) << 16) 53 #define MDIO_CMD_DATA(x) ((x) << 0) 54 55 #define NB8800_MDIO_STS 0x024 56 #define MDIO_STS_ERR BIT(31) 57 58 #define NB8800_MC_ADDR(i) (0x028 + (i)) 59 #define NB8800_MC_INIT 0x02e 60 #define NB8800_UC_ADDR(i) (0x03c + (i)) 61 62 #define NB8800_MAC_MODE 0x044 63 #define RGMII_MODE BIT(7) 64 #define HALF_DUPLEX BIT(4) 65 #define BURST_EN BIT(3) 66 #define LOOPBACK_EN BIT(2) 67 #define GMAC_MODE BIT(0) 68 69 #define NB8800_IC_THRESHOLD 0x050 70 #define NB8800_PE_THRESHOLD 0x051 71 #define NB8800_PF_THRESHOLD 0x052 72 #define NB8800_TX_BUFSIZE 0x054 73 #define NB8800_FIFO_CTL 0x056 74 #define NB8800_PQ1 0x060 75 #define NB8800_PQ2 0x061 76 #define NB8800_SRC_ADDR(i) (0x06a + (i)) 77 #define NB8800_STAT_DATA 0x078 78 #define NB8800_STAT_INDEX 0x07c 79 #define NB8800_STAT_CLEAR 0x07d 80 81 #define NB8800_SLEEP_MODE 0x07e 82 #define SLEEP_MODE BIT(0) 83 84 #define NB8800_WAKEUP 0x07f 85 #define WAKEUP BIT(0) 86 87 /* Aurora NB8800 host interface registers */ 88 #define NB8800_TXC_CR 0x100 89 #define TCR_LK BIT(12) 90 #define TCR_DS BIT(11) 91 #define TCR_BTS(x) (((x) & 0x7) << 8) 92 #define TCR_DIE BIT(7) 93 #define TCR_TFI(x) (((x) & 0x7) << 4) 94 #define TCR_LE BIT(3) 95 #define TCR_RS BIT(2) 96 #define TCR_DM BIT(1) 97 #define TCR_EN BIT(0) 98 99 #define NB8800_TXC_SR 0x104 100 #define TSR_DE BIT(3) 101 #define TSR_DI BIT(2) 102 #define TSR_TO BIT(1) 103 #define TSR_TI BIT(0) 104 105 #define NB8800_TX_SAR 0x108 106 #define NB8800_TX_DESC_ADDR 0x10c 107 108 #define NB8800_TX_REPORT_ADDR 0x110 109 #define TX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xffff) 110 #define TX_FIRST_DEFERRAL BIT(7) 111 #define TX_EARLY_COLLISIONS(x) (((x) >> 3) & 0xf) 112 #define TX_LATE_COLLISION BIT(2) 113 #define TX_PACKET_DROPPED BIT(1) 114 #define TX_FIFO_UNDERRUN BIT(0) 115 #define IS_TX_ERROR(r) ((r) & 0x07) 116 117 #define NB8800_TX_FIFO_SR 0x114 118 #define NB8800_TX_ITR 0x118 119 120 #define NB8800_RXC_CR 0x200 121 #define RCR_FL BIT(13) 122 #define RCR_LK BIT(12) 123 #define RCR_DS BIT(11) 124 #define RCR_BTS(x) (((x) & 7) << 8) 125 #define RCR_DIE BIT(7) 126 #define RCR_RFI(x) (((x) & 7) << 4) 127 #define RCR_LE BIT(3) 128 #define RCR_RS BIT(2) 129 #define RCR_DM BIT(1) 130 #define RCR_EN BIT(0) 131 132 #define NB8800_RXC_SR 0x204 133 #define RSR_DE BIT(3) 134 #define RSR_DI BIT(2) 135 #define RSR_RO BIT(1) 136 #define RSR_RI BIT(0) 137 138 #define NB8800_RX_SAR 0x208 139 #define NB8800_RX_DESC_ADDR 0x20c 140 141 #define NB8800_RX_REPORT_ADDR 0x210 142 #define RX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xFFFF) 143 #define RX_MULTICAST_PKT BIT(9) 144 #define RX_BROADCAST_PKT BIT(8) 145 #define RX_LENGTH_ERR BIT(7) 146 #define RX_FCS_ERR BIT(6) 147 #define RX_RUNT_PKT BIT(5) 148 #define RX_FIFO_OVERRUN BIT(4) 149 #define RX_LATE_COLLISION BIT(3) 150 #define RX_ALIGNMENT_ERROR BIT(2) 151 #define RX_ERROR_MASK 0xfc 152 #define IS_RX_ERROR(r) ((r) & RX_ERROR_MASK) 153 154 #define NB8800_RX_FIFO_SR 0x214 155 #define NB8800_RX_ITR 0x218 156 157 /* Sigma Designs SMP86xx additional registers */ 158 #define NB8800_TANGOX_PAD_MODE 0x400 159 #define PAD_MODE_MASK 0x7 160 #define PAD_MODE_MII 0x0 161 #define PAD_MODE_RGMII 0x1 162 #define PAD_MODE_GTX_CLK_INV BIT(3) 163 #define PAD_MODE_GTX_CLK_DELAY BIT(4) 164 165 #define NB8800_TANGOX_MDIO_CLKDIV 0x420 166 #define NB8800_TANGOX_RESET 0x424 167 168 /* Hardware DMA descriptor */ 169 struct nb8800_dma_desc { 170 u32 s_addr; /* start address */ 171 u32 n_addr; /* next descriptor address */ 172 u32 r_addr; /* report address */ 173 u32 config; 174 } __aligned(8); 175 176 #define DESC_ID BIT(23) 177 #define DESC_EOC BIT(22) 178 #define DESC_EOF BIT(21) 179 #define DESC_LK BIT(20) 180 #define DESC_DS BIT(19) 181 #define DESC_BTS(x) (((x) & 0x7) << 16) 182 183 /* DMA descriptor and associated data for rx. 184 * Allocated from coherent memory. 185 */ 186 struct nb8800_rx_desc { 187 /* DMA descriptor */ 188 struct nb8800_dma_desc desc; 189 190 /* Status report filled in by hardware */ 191 u32 report; 192 }; 193 194 /* Address of buffer on rx ring */ 195 struct nb8800_rx_buf { 196 struct page *page; 197 unsigned long offset; 198 }; 199 200 /* DMA descriptors and associated data for tx. 201 * Allocated from coherent memory. 202 */ 203 struct nb8800_tx_desc { 204 /* DMA descriptor. The second descriptor is used if packet 205 * data is unaligned. 206 */ 207 struct nb8800_dma_desc desc[2]; 208 209 /* Status report filled in by hardware */ 210 u32 report; 211 212 /* Bounce buffer for initial unaligned part of packet */ 213 u8 buf[8] __aligned(8); 214 }; 215 216 /* Packet in tx queue */ 217 struct nb8800_tx_buf { 218 /* Currently queued skb */ 219 struct sk_buff *skb; 220 221 /* DMA address of the first descriptor */ 222 dma_addr_t dma_desc; 223 224 /* DMA address of packet data */ 225 dma_addr_t dma_addr; 226 227 /* Length of DMA mapping, less than skb->len if alignment 228 * buffer is used. 229 */ 230 unsigned int dma_len; 231 232 /* Number of packets in chain starting here */ 233 unsigned int chain_len; 234 235 /* Packet chain ready to be submitted to hardware */ 236 bool ready; 237 }; 238 239 struct nb8800_priv { 240 struct napi_struct napi; 241 242 void __iomem *base; 243 244 /* RX DMA descriptors */ 245 struct nb8800_rx_desc *rx_descs; 246 247 /* RX buffers referenced by DMA descriptors */ 248 struct nb8800_rx_buf *rx_bufs; 249 250 /* Current end of chain */ 251 u32 rx_eoc; 252 253 /* Value for rx interrupt time register in NAPI interrupt mode */ 254 u32 rx_itr_irq; 255 256 /* Value for rx interrupt time register in NAPI poll mode */ 257 u32 rx_itr_poll; 258 259 /* Value for config field of rx DMA descriptors */ 260 u32 rx_dma_config; 261 262 /* TX DMA descriptors */ 263 struct nb8800_tx_desc *tx_descs; 264 265 /* TX packet queue */ 266 struct nb8800_tx_buf *tx_bufs; 267 268 /* Number of free tx queue entries */ 269 atomic_t tx_free; 270 271 /* First free tx queue entry */ 272 u32 tx_next; 273 274 /* Next buffer to transmit */ 275 u32 tx_queue; 276 277 /* Start of current packet chain */ 278 struct nb8800_tx_buf *tx_chain; 279 280 /* Next buffer to reclaim */ 281 u32 tx_done; 282 283 /* Lock for DMA activation */ 284 spinlock_t tx_lock; 285 286 struct mii_bus *mii_bus; 287 struct device_node *phy_node; 288 289 /* PHY connection type from DT */ 290 phy_interface_t phy_mode; 291 292 /* Current link status */ 293 int speed; 294 int duplex; 295 int link; 296 297 /* Pause settings */ 298 bool pause_aneg; 299 bool pause_rx; 300 bool pause_tx; 301 302 /* DMA base address of rx descriptors, see rx_descs above */ 303 dma_addr_t rx_desc_dma; 304 305 /* DMA base address of tx descriptors, see tx_descs above */ 306 dma_addr_t tx_desc_dma; 307 308 struct clk *clk; 309 }; 310 311 struct nb8800_ops { 312 int (*init)(struct net_device *dev); 313 int (*reset)(struct net_device *dev); 314 }; 315 316 #endif /* _NB8800_H_ */ 317
