1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
3 #include <linux/string.h>
4 #include <linux/init.h>
5 #include <linux/of.h>
6 #include <linux/of_platform.h>
7 
8 #include <asm/oplib.h>
9 #include <asm/prom.h>
10 #include <asm/irq.h>
11 #include <asm/upa.h>
12 
13 #include "prom.h"
14 
15 #ifdef CONFIG_PCI
16 /* PSYCHO interrupt mapping support. */
17 #define PSYCHO_IMAP_A_SLOT0	0x0c00UL
18 #define PSYCHO_IMAP_B_SLOT0	0x0c20UL
psycho_pcislot_imap_offset(unsigned long ino)19 static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
20 {
21 	unsigned int bus =  (ino & 0x10) >> 4;
22 	unsigned int slot = (ino & 0x0c) >> 2;
23 
24 	if (bus == 0)
25 		return PSYCHO_IMAP_A_SLOT0 + (slot * 8);
26 	else
27 		return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
28 }
29 
30 #define PSYCHO_OBIO_IMAP_BASE	0x1000UL
31 
32 #define PSYCHO_ONBOARD_IRQ_BASE		0x20
33 #define psycho_onboard_imap_offset(__ino) \
34 	(PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
35 
36 #define PSYCHO_ICLR_A_SLOT0	0x1400UL
37 #define PSYCHO_ICLR_SCSI	0x1800UL
38 
39 #define psycho_iclr_offset(ino)					      \
40 	((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
41 			(PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
42 
psycho_irq_build(struct device_node * dp,unsigned int ino,void * _data)43 static unsigned int psycho_irq_build(struct device_node *dp,
44 				     unsigned int ino,
45 				     void *_data)
46 {
47 	unsigned long controller_regs = (unsigned long) _data;
48 	unsigned long imap, iclr;
49 	unsigned long imap_off, iclr_off;
50 	int inofixup = 0;
51 
52 	ino &= 0x3f;
53 	if (ino < PSYCHO_ONBOARD_IRQ_BASE) {
54 		/* PCI slot */
55 		imap_off = psycho_pcislot_imap_offset(ino);
56 	} else {
57 		/* Onboard device */
58 		imap_off = psycho_onboard_imap_offset(ino);
59 	}
60 
61 	/* Now build the IRQ bucket. */
62 	imap = controller_regs + imap_off;
63 
64 	iclr_off = psycho_iclr_offset(ino);
65 	iclr = controller_regs + iclr_off;
66 
67 	if ((ino & 0x20) == 0)
68 		inofixup = ino & 0x03;
69 
70 	return build_irq(inofixup, iclr, imap);
71 }
72 
psycho_irq_trans_init(struct device_node * dp)73 static void __init psycho_irq_trans_init(struct device_node *dp)
74 {
75 	const struct linux_prom64_registers *regs;
76 
77 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
78 	dp->irq_trans->irq_build = psycho_irq_build;
79 
80 	regs = of_get_property(dp, "reg", NULL);
81 	dp->irq_trans->data = (void *) regs[2].phys_addr;
82 }
83 
84 #define sabre_read(__reg) \
85 ({	u64 __ret; \
86 	__asm__ __volatile__("ldxa [%1] %2, %0" \
87 			     : "=r" (__ret) \
88 			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
89 			     : "memory"); \
90 	__ret; \
91 })
92 
93 struct sabre_irq_data {
94 	unsigned long controller_regs;
95 	unsigned int pci_first_busno;
96 };
97 #define SABRE_CONFIGSPACE	0x001000000UL
98 #define SABRE_WRSYNC		0x1c20UL
99 
100 #define SABRE_CONFIG_BASE(CONFIG_SPACE)	\
101 	(CONFIG_SPACE | (1UL << 24))
102 #define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG)	\
103 	(((unsigned long)(BUS)   << 16) |	\
104 	 ((unsigned long)(DEVFN) << 8)  |	\
105 	 ((unsigned long)(REG)))
106 
107 /* When a device lives behind a bridge deeper in the PCI bus topology
108  * than APB, a special sequence must run to make sure all pending DMA
109  * transfers at the time of IRQ delivery are visible in the coherency
110  * domain by the cpu.  This sequence is to perform a read on the far
111  * side of the non-APB bridge, then perform a read of Sabre's DMA
112  * write-sync register.
113  */
sabre_wsync_handler(unsigned int ino,void * _arg1,void * _arg2)114 static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
115 {
116 	unsigned int phys_hi = (unsigned int) (unsigned long) _arg1;
117 	struct sabre_irq_data *irq_data = _arg2;
118 	unsigned long controller_regs = irq_data->controller_regs;
119 	unsigned long sync_reg = controller_regs + SABRE_WRSYNC;
120 	unsigned long config_space = controller_regs + SABRE_CONFIGSPACE;
121 	unsigned int bus, devfn;
122 	u16 _unused;
123 
124 	config_space = SABRE_CONFIG_BASE(config_space);
125 
126 	bus = (phys_hi >> 16) & 0xff;
127 	devfn = (phys_hi >> 8) & 0xff;
128 
129 	config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00);
130 
131 	__asm__ __volatile__("membar #Sync\n\t"
132 			     "lduha [%1] %2, %0\n\t"
133 			     "membar #Sync"
134 			     : "=r" (_unused)
135 			     : "r" ((u16 *) config_space),
136 			       "i" (ASI_PHYS_BYPASS_EC_E_L)
137 			     : "memory");
138 
139 	sabre_read(sync_reg);
140 }
141 
142 #define SABRE_IMAP_A_SLOT0	0x0c00UL
143 #define SABRE_IMAP_B_SLOT0	0x0c20UL
144 #define SABRE_ICLR_A_SLOT0	0x1400UL
145 #define SABRE_ICLR_B_SLOT0	0x1480UL
146 #define SABRE_ICLR_SCSI		0x1800UL
147 #define SABRE_ICLR_ETH		0x1808UL
148 #define SABRE_ICLR_BPP		0x1810UL
149 #define SABRE_ICLR_AU_REC	0x1818UL
150 #define SABRE_ICLR_AU_PLAY	0x1820UL
151 #define SABRE_ICLR_PFAIL	0x1828UL
152 #define SABRE_ICLR_KMS		0x1830UL
153 #define SABRE_ICLR_FLPY		0x1838UL
154 #define SABRE_ICLR_SHW		0x1840UL
155 #define SABRE_ICLR_KBD		0x1848UL
156 #define SABRE_ICLR_MS		0x1850UL
157 #define SABRE_ICLR_SER		0x1858UL
158 #define SABRE_ICLR_UE		0x1870UL
159 #define SABRE_ICLR_CE		0x1878UL
160 #define SABRE_ICLR_PCIERR	0x1880UL
161 
sabre_pcislot_imap_offset(unsigned long ino)162 static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
163 {
164 	unsigned int bus =  (ino & 0x10) >> 4;
165 	unsigned int slot = (ino & 0x0c) >> 2;
166 
167 	if (bus == 0)
168 		return SABRE_IMAP_A_SLOT0 + (slot * 8);
169 	else
170 		return SABRE_IMAP_B_SLOT0 + (slot * 8);
171 }
172 
173 #define SABRE_OBIO_IMAP_BASE	0x1000UL
174 #define SABRE_ONBOARD_IRQ_BASE	0x20
175 #define sabre_onboard_imap_offset(__ino) \
176 	(SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
177 
178 #define sabre_iclr_offset(ino)					      \
179 	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
180 			(SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
181 
sabre_device_needs_wsync(struct device_node * dp)182 static int sabre_device_needs_wsync(struct device_node *dp)
183 {
184 	struct device_node *parent = dp->parent;
185 	const char *parent_model, *parent_compat;
186 
187 	/* This traversal up towards the root is meant to
188 	 * handle two cases:
189 	 *
190 	 * 1) non-PCI bus sitting under PCI, such as 'ebus'
191 	 * 2) the PCI controller interrupts themselves, which
192 	 *    will use the sabre_irq_build but do not need
193 	 *    the DMA synchronization handling
194 	 */
195 	while (parent) {
196 		if (of_node_is_type(parent, "pci"))
197 			break;
198 		parent = parent->parent;
199 	}
200 
201 	if (!parent)
202 		return 0;
203 
204 	parent_model = of_get_property(parent,
205 				       "model", NULL);
206 	if (parent_model &&
207 	    (!strcmp(parent_model, "SUNW,sabre") ||
208 	     !strcmp(parent_model, "SUNW,simba")))
209 		return 0;
210 
211 	parent_compat = of_get_property(parent,
212 					"compatible", NULL);
213 	if (parent_compat &&
214 	    (!strcmp(parent_compat, "pci108e,a000") ||
215 	     !strcmp(parent_compat, "pci108e,a001")))
216 		return 0;
217 
218 	return 1;
219 }
220 
sabre_irq_build(struct device_node * dp,unsigned int ino,void * _data)221 static unsigned int sabre_irq_build(struct device_node *dp,
222 				    unsigned int ino,
223 				    void *_data)
224 {
225 	struct sabre_irq_data *irq_data = _data;
226 	unsigned long controller_regs = irq_data->controller_regs;
227 	const struct linux_prom_pci_registers *regs;
228 	unsigned long imap, iclr;
229 	unsigned long imap_off, iclr_off;
230 	int inofixup = 0;
231 	int irq;
232 
233 	ino &= 0x3f;
234 	if (ino < SABRE_ONBOARD_IRQ_BASE) {
235 		/* PCI slot */
236 		imap_off = sabre_pcislot_imap_offset(ino);
237 	} else {
238 		/* onboard device */
239 		imap_off = sabre_onboard_imap_offset(ino);
240 	}
241 
242 	/* Now build the IRQ bucket. */
243 	imap = controller_regs + imap_off;
244 
245 	iclr_off = sabre_iclr_offset(ino);
246 	iclr = controller_regs + iclr_off;
247 
248 	if ((ino & 0x20) == 0)
249 		inofixup = ino & 0x03;
250 
251 	irq = build_irq(inofixup, iclr, imap);
252 
253 	/* If the parent device is a PCI<->PCI bridge other than
254 	 * APB, we have to install a pre-handler to ensure that
255 	 * all pending DMA is drained before the interrupt handler
256 	 * is run.
257 	 */
258 	regs = of_get_property(dp, "reg", NULL);
259 	if (regs && sabre_device_needs_wsync(dp)) {
260 		irq_install_pre_handler(irq,
261 					sabre_wsync_handler,
262 					(void *) (long) regs->phys_hi,
263 					(void *) irq_data);
264 	}
265 
266 	return irq;
267 }
268 
sabre_irq_trans_init(struct device_node * dp)269 static void __init sabre_irq_trans_init(struct device_node *dp)
270 {
271 	const struct linux_prom64_registers *regs;
272 	struct sabre_irq_data *irq_data;
273 	const u32 *busrange;
274 
275 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
276 	dp->irq_trans->irq_build = sabre_irq_build;
277 
278 	irq_data = prom_early_alloc(sizeof(struct sabre_irq_data));
279 
280 	regs = of_get_property(dp, "reg", NULL);
281 	irq_data->controller_regs = regs[0].phys_addr;
282 
283 	busrange = of_get_property(dp, "bus-range", NULL);
284 	irq_data->pci_first_busno = busrange[0];
285 
286 	dp->irq_trans->data = irq_data;
287 }
288 
289 /* SCHIZO interrupt mapping support.  Unlike Psycho, for this controller the
290  * imap/iclr registers are per-PBM.
291  */
292 #define SCHIZO_IMAP_BASE	0x1000UL
293 #define SCHIZO_ICLR_BASE	0x1400UL
294 
schizo_imap_offset(unsigned long ino)295 static unsigned long schizo_imap_offset(unsigned long ino)
296 {
297 	return SCHIZO_IMAP_BASE + (ino * 8UL);
298 }
299 
schizo_iclr_offset(unsigned long ino)300 static unsigned long schizo_iclr_offset(unsigned long ino)
301 {
302 	return SCHIZO_ICLR_BASE + (ino * 8UL);
303 }
304 
schizo_ino_to_iclr(unsigned long pbm_regs,unsigned int ino)305 static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
306 					unsigned int ino)
307 {
308 
309 	return pbm_regs + schizo_iclr_offset(ino);
310 }
311 
schizo_ino_to_imap(unsigned long pbm_regs,unsigned int ino)312 static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
313 					unsigned int ino)
314 {
315 	return pbm_regs + schizo_imap_offset(ino);
316 }
317 
318 #define schizo_read(__reg) \
319 ({	u64 __ret; \
320 	__asm__ __volatile__("ldxa [%1] %2, %0" \
321 			     : "=r" (__ret) \
322 			     : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
323 			     : "memory"); \
324 	__ret; \
325 })
326 #define schizo_write(__reg, __val) \
327 	__asm__ __volatile__("stxa %0, [%1] %2" \
328 			     : /* no outputs */ \
329 			     : "r" (__val), "r" (__reg), \
330 			       "i" (ASI_PHYS_BYPASS_EC_E) \
331 			     : "memory")
332 
tomatillo_wsync_handler(unsigned int ino,void * _arg1,void * _arg2)333 static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
334 {
335 	unsigned long sync_reg = (unsigned long) _arg2;
336 	u64 mask = 1UL << (ino & IMAP_INO);
337 	u64 val;
338 	int limit;
339 
340 	schizo_write(sync_reg, mask);
341 
342 	limit = 100000;
343 	val = 0;
344 	while (--limit) {
345 		val = schizo_read(sync_reg);
346 		if (!(val & mask))
347 			break;
348 	}
349 	if (limit <= 0) {
350 		printk("tomatillo_wsync_handler: DMA won't sync [%llx:%llx]\n",
351 		       val, mask);
352 	}
353 
354 	if (_arg1) {
355 		static unsigned char cacheline[64]
356 			__attribute__ ((aligned (64)));
357 
358 		__asm__ __volatile__("rd %%fprs, %0\n\t"
359 				     "or %0, %4, %1\n\t"
360 				     "wr %1, 0x0, %%fprs\n\t"
361 				     "stda %%f0, [%5] %6\n\t"
362 				     "wr %0, 0x0, %%fprs\n\t"
363 				     "membar #Sync"
364 				     : "=&r" (mask), "=&r" (val)
365 				     : "0" (mask), "1" (val),
366 				     "i" (FPRS_FEF), "r" (&cacheline[0]),
367 				     "i" (ASI_BLK_COMMIT_P));
368 	}
369 }
370 
371 struct schizo_irq_data {
372 	unsigned long pbm_regs;
373 	unsigned long sync_reg;
374 	u32 portid;
375 	int chip_version;
376 };
377 
schizo_irq_build(struct device_node * dp,unsigned int ino,void * _data)378 static unsigned int schizo_irq_build(struct device_node *dp,
379 				     unsigned int ino,
380 				     void *_data)
381 {
382 	struct schizo_irq_data *irq_data = _data;
383 	unsigned long pbm_regs = irq_data->pbm_regs;
384 	unsigned long imap, iclr;
385 	int ign_fixup;
386 	int irq;
387 	int is_tomatillo;
388 
389 	ino &= 0x3f;
390 
391 	/* Now build the IRQ bucket. */
392 	imap = schizo_ino_to_imap(pbm_regs, ino);
393 	iclr = schizo_ino_to_iclr(pbm_regs, ino);
394 
395 	/* On Schizo, no inofixup occurs.  This is because each
396 	 * INO has it's own IMAP register.  On Psycho and Sabre
397 	 * there is only one IMAP register for each PCI slot even
398 	 * though four different INOs can be generated by each
399 	 * PCI slot.
400 	 *
401 	 * But, for JBUS variants (essentially, Tomatillo), we have
402 	 * to fixup the lowest bit of the interrupt group number.
403 	 */
404 	ign_fixup = 0;
405 
406 	is_tomatillo = (irq_data->sync_reg != 0UL);
407 
408 	if (is_tomatillo) {
409 		if (irq_data->portid & 1)
410 			ign_fixup = (1 << 6);
411 	}
412 
413 	irq = build_irq(ign_fixup, iclr, imap);
414 
415 	if (is_tomatillo) {
416 		irq_install_pre_handler(irq,
417 					tomatillo_wsync_handler,
418 					((irq_data->chip_version <= 4) ?
419 					 (void *) 1 : (void *) 0),
420 					(void *) irq_data->sync_reg);
421 	}
422 
423 	return irq;
424 }
425 
__schizo_irq_trans_init(struct device_node * dp,int is_tomatillo)426 static void __init __schizo_irq_trans_init(struct device_node *dp,
427 					   int is_tomatillo)
428 {
429 	const struct linux_prom64_registers *regs;
430 	struct schizo_irq_data *irq_data;
431 
432 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
433 	dp->irq_trans->irq_build = schizo_irq_build;
434 
435 	irq_data = prom_early_alloc(sizeof(struct schizo_irq_data));
436 
437 	regs = of_get_property(dp, "reg", NULL);
438 	dp->irq_trans->data = irq_data;
439 
440 	irq_data->pbm_regs = regs[0].phys_addr;
441 	if (is_tomatillo)
442 		irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL;
443 	else
444 		irq_data->sync_reg = 0UL;
445 	irq_data->portid = of_getintprop_default(dp, "portid", 0);
446 	irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
447 }
448 
schizo_irq_trans_init(struct device_node * dp)449 static void __init schizo_irq_trans_init(struct device_node *dp)
450 {
451 	__schizo_irq_trans_init(dp, 0);
452 }
453 
tomatillo_irq_trans_init(struct device_node * dp)454 static void __init tomatillo_irq_trans_init(struct device_node *dp)
455 {
456 	__schizo_irq_trans_init(dp, 1);
457 }
458 
pci_sun4v_irq_build(struct device_node * dp,unsigned int devino,void * _data)459 static unsigned int pci_sun4v_irq_build(struct device_node *dp,
460 					unsigned int devino,
461 					void *_data)
462 {
463 	u32 devhandle = (u32) (unsigned long) _data;
464 
465 	return sun4v_build_irq(devhandle, devino);
466 }
467 
pci_sun4v_irq_trans_init(struct device_node * dp)468 static void __init pci_sun4v_irq_trans_init(struct device_node *dp)
469 {
470 	const struct linux_prom64_registers *regs;
471 
472 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
473 	dp->irq_trans->irq_build = pci_sun4v_irq_build;
474 
475 	regs = of_get_property(dp, "reg", NULL);
476 	dp->irq_trans->data = (void *) (unsigned long)
477 		((regs->phys_addr >> 32UL) & 0x0fffffff);
478 }
479 
480 struct fire_irq_data {
481 	unsigned long pbm_regs;
482 	u32 portid;
483 };
484 
485 #define FIRE_IMAP_BASE	0x001000
486 #define FIRE_ICLR_BASE	0x001400
487 
fire_imap_offset(unsigned long ino)488 static unsigned long fire_imap_offset(unsigned long ino)
489 {
490 	return FIRE_IMAP_BASE + (ino * 8UL);
491 }
492 
fire_iclr_offset(unsigned long ino)493 static unsigned long fire_iclr_offset(unsigned long ino)
494 {
495 	return FIRE_ICLR_BASE + (ino * 8UL);
496 }
497 
fire_ino_to_iclr(unsigned long pbm_regs,unsigned int ino)498 static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
499 					    unsigned int ino)
500 {
501 	return pbm_regs + fire_iclr_offset(ino);
502 }
503 
fire_ino_to_imap(unsigned long pbm_regs,unsigned int ino)504 static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
505 					    unsigned int ino)
506 {
507 	return pbm_regs + fire_imap_offset(ino);
508 }
509 
fire_irq_build(struct device_node * dp,unsigned int ino,void * _data)510 static unsigned int fire_irq_build(struct device_node *dp,
511 					 unsigned int ino,
512 					 void *_data)
513 {
514 	struct fire_irq_data *irq_data = _data;
515 	unsigned long pbm_regs = irq_data->pbm_regs;
516 	unsigned long imap, iclr;
517 	unsigned long int_ctrlr;
518 
519 	ino &= 0x3f;
520 
521 	/* Now build the IRQ bucket. */
522 	imap = fire_ino_to_imap(pbm_regs, ino);
523 	iclr = fire_ino_to_iclr(pbm_regs, ino);
524 
525 	/* Set the interrupt controller number.  */
526 	int_ctrlr = 1 << 6;
527 	upa_writeq(int_ctrlr, imap);
528 
529 	/* The interrupt map registers do not have an INO field
530 	 * like other chips do.  They return zero in the INO
531 	 * field, and the interrupt controller number is controlled
532 	 * in bits 6 to 9.  So in order for build_irq() to get
533 	 * the INO right we pass it in as part of the fixup
534 	 * which will get added to the map register zero value
535 	 * read by build_irq().
536 	 */
537 	ino |= (irq_data->portid << 6);
538 	ino -= int_ctrlr;
539 	return build_irq(ino, iclr, imap);
540 }
541 
fire_irq_trans_init(struct device_node * dp)542 static void __init fire_irq_trans_init(struct device_node *dp)
543 {
544 	const struct linux_prom64_registers *regs;
545 	struct fire_irq_data *irq_data;
546 
547 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
548 	dp->irq_trans->irq_build = fire_irq_build;
549 
550 	irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
551 
552 	regs = of_get_property(dp, "reg", NULL);
553 	dp->irq_trans->data = irq_data;
554 
555 	irq_data->pbm_regs = regs[0].phys_addr;
556 	irq_data->portid = of_getintprop_default(dp, "portid", 0);
557 }
558 #endif /* CONFIG_PCI */
559 
560 #ifdef CONFIG_SBUS
561 /* INO number to IMAP register offset for SYSIO external IRQ's.
562  * This should conform to both Sunfire/Wildfire server and Fusion
563  * desktop designs.
564  */
565 #define SYSIO_IMAP_SLOT0	0x2c00UL
566 #define SYSIO_IMAP_SLOT1	0x2c08UL
567 #define SYSIO_IMAP_SLOT2	0x2c10UL
568 #define SYSIO_IMAP_SLOT3	0x2c18UL
569 #define SYSIO_IMAP_SCSI		0x3000UL
570 #define SYSIO_IMAP_ETH		0x3008UL
571 #define SYSIO_IMAP_BPP		0x3010UL
572 #define SYSIO_IMAP_AUDIO	0x3018UL
573 #define SYSIO_IMAP_PFAIL	0x3020UL
574 #define SYSIO_IMAP_KMS		0x3028UL
575 #define SYSIO_IMAP_FLPY		0x3030UL
576 #define SYSIO_IMAP_SHW		0x3038UL
577 #define SYSIO_IMAP_KBD		0x3040UL
578 #define SYSIO_IMAP_MS		0x3048UL
579 #define SYSIO_IMAP_SER		0x3050UL
580 #define SYSIO_IMAP_TIM0		0x3060UL
581 #define SYSIO_IMAP_TIM1		0x3068UL
582 #define SYSIO_IMAP_UE		0x3070UL
583 #define SYSIO_IMAP_CE		0x3078UL
584 #define SYSIO_IMAP_SBERR	0x3080UL
585 #define SYSIO_IMAP_PMGMT	0x3088UL
586 #define SYSIO_IMAP_GFX		0x3090UL
587 #define SYSIO_IMAP_EUPA		0x3098UL
588 
589 #define bogon     ((unsigned long) -1)
590 static unsigned long sysio_irq_offsets[] = {
591 	/* SBUS Slot 0 --> 3, level 1 --> 7 */
592 	SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
593 	SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
594 	SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
595 	SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
596 	SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
597 	SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
598 	SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
599 	SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
600 
601 	/* Onboard devices (not relevant/used on SunFire). */
602 	SYSIO_IMAP_SCSI,
603 	SYSIO_IMAP_ETH,
604 	SYSIO_IMAP_BPP,
605 	bogon,
606 	SYSIO_IMAP_AUDIO,
607 	SYSIO_IMAP_PFAIL,
608 	bogon,
609 	bogon,
610 	SYSIO_IMAP_KMS,
611 	SYSIO_IMAP_FLPY,
612 	SYSIO_IMAP_SHW,
613 	SYSIO_IMAP_KBD,
614 	SYSIO_IMAP_MS,
615 	SYSIO_IMAP_SER,
616 	bogon,
617 	bogon,
618 	SYSIO_IMAP_TIM0,
619 	SYSIO_IMAP_TIM1,
620 	bogon,
621 	bogon,
622 	SYSIO_IMAP_UE,
623 	SYSIO_IMAP_CE,
624 	SYSIO_IMAP_SBERR,
625 	SYSIO_IMAP_PMGMT,
626 	SYSIO_IMAP_GFX,
627 	SYSIO_IMAP_EUPA,
628 };
629 
630 #undef bogon
631 
632 #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
633 
634 /* Convert Interrupt Mapping register pointer to associated
635  * Interrupt Clear register pointer, SYSIO specific version.
636  */
637 #define SYSIO_ICLR_UNUSED0	0x3400UL
638 #define SYSIO_ICLR_SLOT0	0x3408UL
639 #define SYSIO_ICLR_SLOT1	0x3448UL
640 #define SYSIO_ICLR_SLOT2	0x3488UL
641 #define SYSIO_ICLR_SLOT3	0x34c8UL
sysio_imap_to_iclr(unsigned long imap)642 static unsigned long sysio_imap_to_iclr(unsigned long imap)
643 {
644 	unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
645 	return imap + diff;
646 }
647 
sbus_of_build_irq(struct device_node * dp,unsigned int ino,void * _data)648 static unsigned int sbus_of_build_irq(struct device_node *dp,
649 				      unsigned int ino,
650 				      void *_data)
651 {
652 	unsigned long reg_base = (unsigned long) _data;
653 	const struct linux_prom_registers *regs;
654 	unsigned long imap, iclr;
655 	int sbus_slot = 0;
656 	int sbus_level = 0;
657 
658 	ino &= 0x3f;
659 
660 	regs = of_get_property(dp, "reg", NULL);
661 	if (regs)
662 		sbus_slot = regs->which_io;
663 
664 	if (ino < 0x20)
665 		ino += (sbus_slot * 8);
666 
667 	imap = sysio_irq_offsets[ino];
668 	if (imap == ((unsigned long)-1)) {
669 		prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
670 			    ino);
671 		prom_halt();
672 	}
673 	imap += reg_base;
674 
675 	/* SYSIO inconsistency.  For external SLOTS, we have to select
676 	 * the right ICLR register based upon the lower SBUS irq level
677 	 * bits.
678 	 */
679 	if (ino >= 0x20) {
680 		iclr = sysio_imap_to_iclr(imap);
681 	} else {
682 		sbus_level = ino & 0x7;
683 
684 		switch(sbus_slot) {
685 		case 0:
686 			iclr = reg_base + SYSIO_ICLR_SLOT0;
687 			break;
688 		case 1:
689 			iclr = reg_base + SYSIO_ICLR_SLOT1;
690 			break;
691 		case 2:
692 			iclr = reg_base + SYSIO_ICLR_SLOT2;
693 			break;
694 		default:
695 		case 3:
696 			iclr = reg_base + SYSIO_ICLR_SLOT3;
697 			break;
698 		}
699 
700 		iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
701 	}
702 	return build_irq(sbus_level, iclr, imap);
703 }
704 
sbus_irq_trans_init(struct device_node * dp)705 static void __init sbus_irq_trans_init(struct device_node *dp)
706 {
707 	const struct linux_prom64_registers *regs;
708 
709 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
710 	dp->irq_trans->irq_build = sbus_of_build_irq;
711 
712 	regs = of_get_property(dp, "reg", NULL);
713 	dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr;
714 }
715 #endif /* CONFIG_SBUS */
716 
717 
central_build_irq(struct device_node * dp,unsigned int ino,void * _data)718 static unsigned int central_build_irq(struct device_node *dp,
719 				      unsigned int ino,
720 				      void *_data)
721 {
722 	struct device_node *central_dp = _data;
723 	struct platform_device *central_op = of_find_device_by_node(central_dp);
724 	struct resource *res;
725 	unsigned long imap, iclr;
726 	u32 tmp;
727 
728 	if (of_node_name_eq(dp, "eeprom")) {
729 		res = &central_op->resource[5];
730 	} else if (of_node_name_eq(dp, "zs")) {
731 		res = &central_op->resource[4];
732 	} else if (of_node_name_eq(dp, "clock-board")) {
733 		res = &central_op->resource[3];
734 	} else {
735 		return ino;
736 	}
737 
738 	imap = res->start + 0x00UL;
739 	iclr = res->start + 0x10UL;
740 
741 	/* Set the INO state to idle, and disable.  */
742 	upa_writel(0, iclr);
743 	upa_readl(iclr);
744 
745 	tmp = upa_readl(imap);
746 	tmp &= ~0x80000000;
747 	upa_writel(tmp, imap);
748 
749 	return build_irq(0, iclr, imap);
750 }
751 
central_irq_trans_init(struct device_node * dp)752 static void __init central_irq_trans_init(struct device_node *dp)
753 {
754 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
755 	dp->irq_trans->irq_build = central_build_irq;
756 
757 	dp->irq_trans->data = dp;
758 }
759 
760 struct irq_trans {
761 	const char *name;
762 	void (*init)(struct device_node *);
763 };
764 
765 #ifdef CONFIG_PCI
766 static struct irq_trans __initdata pci_irq_trans_table[] = {
767 	{ "SUNW,sabre", sabre_irq_trans_init },
768 	{ "pci108e,a000", sabre_irq_trans_init },
769 	{ "pci108e,a001", sabre_irq_trans_init },
770 	{ "SUNW,psycho", psycho_irq_trans_init },
771 	{ "pci108e,8000", psycho_irq_trans_init },
772 	{ "SUNW,schizo", schizo_irq_trans_init },
773 	{ "pci108e,8001", schizo_irq_trans_init },
774 	{ "SUNW,schizo+", schizo_irq_trans_init },
775 	{ "pci108e,8002", schizo_irq_trans_init },
776 	{ "SUNW,tomatillo", tomatillo_irq_trans_init },
777 	{ "pci108e,a801", tomatillo_irq_trans_init },
778 	{ "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
779 	{ "pciex108e,80f0", fire_irq_trans_init },
780 };
781 #endif
782 
sun4v_vdev_irq_build(struct device_node * dp,unsigned int devino,void * _data)783 static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
784 					 unsigned int devino,
785 					 void *_data)
786 {
787 	u32 devhandle = (u32) (unsigned long) _data;
788 
789 	return sun4v_build_irq(devhandle, devino);
790 }
791 
sun4v_vdev_irq_trans_init(struct device_node * dp)792 static void __init sun4v_vdev_irq_trans_init(struct device_node *dp)
793 {
794 	const struct linux_prom64_registers *regs;
795 
796 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
797 	dp->irq_trans->irq_build = sun4v_vdev_irq_build;
798 
799 	regs = of_get_property(dp, "reg", NULL);
800 	dp->irq_trans->data = (void *) (unsigned long)
801 		((regs->phys_addr >> 32UL) & 0x0fffffff);
802 }
803 
irq_trans_init(struct device_node * dp)804 void __init irq_trans_init(struct device_node *dp)
805 {
806 #ifdef CONFIG_PCI
807 	const char *model;
808 	int i;
809 #endif
810 
811 #ifdef CONFIG_PCI
812 	model = of_get_property(dp, "model", NULL);
813 	if (!model)
814 		model = of_get_property(dp, "compatible", NULL);
815 	if (model) {
816 		for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
817 			struct irq_trans *t = &pci_irq_trans_table[i];
818 
819 			if (!strcmp(model, t->name)) {
820 				t->init(dp);
821 				return;
822 			}
823 		}
824 	}
825 #endif
826 #ifdef CONFIG_SBUS
827 	if (of_node_name_eq(dp, "sbus") ||
828 	    of_node_name_eq(dp, "sbi")) {
829 		sbus_irq_trans_init(dp);
830 		return;
831 	}
832 #endif
833 	if (of_node_name_eq(dp, "fhc") &&
834 	    of_node_name_eq(dp->parent, "central")) {
835 		central_irq_trans_init(dp);
836 		return;
837 	}
838 	if (of_node_name_eq(dp, "virtual-devices") ||
839 	    of_node_name_eq(dp, "niu")) {
840 		sun4v_vdev_irq_trans_init(dp);
841 		return;
842 	}
843 }
844