1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Signal trampoline for 64 bits processes in a ppc64 kernel for 4 * use in the vDSO 5 * 6 * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. 7 * Copyright (C) 2004 Alan Modra (amodra@au.ibm.com)), IBM Corp. 8 */ 9#include <asm/cache.h> /* IFETCH_ALIGN_BYTES */ 10#include <asm/processor.h> 11#include <asm/ppc_asm.h> 12#include <asm/unistd.h> 13#include <asm/vdso.h> 14#include <asm/ptrace.h> /* XXX for __SIGNAL_FRAMESIZE */ 15 16 .text 17 18 .balign 8 19 .balign IFETCH_ALIGN_BYTES 20V_FUNCTION_BEGIN(__kernel_sigtramp_rt64) 21.Lsigrt_start: 22 bctrl /* call the handler */ 23 addi r1, r1, __SIGNAL_FRAMESIZE 24 li r0,__NR_rt_sigreturn 25 sc 26.Lsigrt_end: 27V_FUNCTION_END(__kernel_sigtramp_rt64) 28/* The .balign 8 above and the following zeros mimic the old stack 29 trampoline layout. The last magic value is the ucontext pointer, 30 chosen in such a way that older libgcc unwind code returns a zero 31 for a sigcontext pointer. */ 32 .long 0,0,0 33 .quad 0,-21*8 34 35/* Register r1 can be found at offset 8 of a pt_regs structure. 36 A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ 37#define cfa_save \ 38 .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ 39 .uleb128 9f - 1f; /* length */ \ 401: \ 41 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 42 .byte 0x06; /* DW_OP_deref */ \ 43 .byte 0x23; .uleb128 RSIZE; /* DW_OP_plus_uconst */ \ 44 .byte 0x06; /* DW_OP_deref */ \ 459: 46 47/* Register REGNO can be found at offset OFS of a pt_regs structure. 48 A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ 49#define rsave(regno, ofs) \ 50 .byte 0x10; /* DW_CFA_expression */ \ 51 .uleb128 regno; /* regno */ \ 52 .uleb128 9f - 1f; /* length */ \ 531: \ 54 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 55 .byte 0x06; /* DW_OP_deref */ \ 56 .ifne ofs; \ 57 .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ 58 .endif; \ 599: 60 61/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 62 of the VMX reg struct. A pointer to the VMX reg struct is at VREGS in 63 the pt_regs struct. This macro is for REGNO == 0, and contains 64 'subroutines' that the other macros jump to. */ 65#define vsave_msr0(regno) \ 66 .byte 0x10; /* DW_CFA_expression */ \ 67 .uleb128 regno + 77; /* regno */ \ 68 .uleb128 9f - 1f; /* length */ \ 691: \ 70 .byte 0x30 + regno; /* DW_OP_lit0 */ \ 712: \ 72 .byte 0x40; /* DW_OP_lit16 */ \ 73 .byte 0x1e; /* DW_OP_mul */ \ 743: \ 75 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 76 .byte 0x06; /* DW_OP_deref */ \ 77 .byte 0x12; /* DW_OP_dup */ \ 78 .byte 0x23; /* DW_OP_plus_uconst */ \ 79 .uleb128 33*RSIZE; /* msr offset */ \ 80 .byte 0x06; /* DW_OP_deref */ \ 81 .byte 0x0c; .long 1 << 25; /* DW_OP_const4u */ \ 82 .byte 0x1a; /* DW_OP_and */ \ 83 .byte 0x12; /* DW_OP_dup, ret 0 if bra taken */ \ 84 .byte 0x30; /* DW_OP_lit0 */ \ 85 .byte 0x29; /* DW_OP_eq */ \ 86 .byte 0x28; .short 0x7fff; /* DW_OP_bra to end */ \ 87 .byte 0x13; /* DW_OP_drop, pop the 0 */ \ 88 .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ 89 .byte 0x06; /* DW_OP_deref */ \ 90 .byte 0x22; /* DW_OP_plus */ \ 91 .byte 0x2f; .short 0x7fff; /* DW_OP_skip to end */ \ 929: 93 94/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 95 of the VMX reg struct. REGNO is 1 thru 31. */ 96#define vsave_msr1(regno) \ 97 .byte 0x10; /* DW_CFA_expression */ \ 98 .uleb128 regno + 77; /* regno */ \ 99 .uleb128 9f - 1f; /* length */ \ 1001: \ 101 .byte 0x30 + regno; /* DW_OP_lit n */ \ 102 .byte 0x2f; .short 2b - 9f; /* DW_OP_skip */ \ 1039: 104 105/* If msr bit 1<<25 is set, then VMX register REGNO is at offset OFS of 106 the VMX save block. */ 107#define vsave_msr2(regno, ofs) \ 108 .byte 0x10; /* DW_CFA_expression */ \ 109 .uleb128 regno + 77; /* regno */ \ 110 .uleb128 9f - 1f; /* length */ \ 1111: \ 112 .byte 0x0a; .short ofs; /* DW_OP_const2u */ \ 113 .byte 0x2f; .short 3b - 9f; /* DW_OP_skip */ \ 1149: 115 116/* VMX register REGNO is at offset OFS of the VMX save area. */ 117#define vsave(regno, ofs) \ 118 .byte 0x10; /* DW_CFA_expression */ \ 119 .uleb128 regno + 77; /* regno */ \ 120 .uleb128 9f - 1f; /* length */ \ 1211: \ 122 .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ 123 .byte 0x06; /* DW_OP_deref */ \ 124 .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ 125 .byte 0x06; /* DW_OP_deref */ \ 126 .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ 1279: 128 129/* This is where the pt_regs pointer can be found on the stack. */ 130#define PTREGS 128+168+56 131 132/* Size of regs. */ 133#define RSIZE 8 134 135/* Size of CR reg in DWARF unwind info. */ 136#define CRSIZE 4 137 138/* Offset of CR reg within a full word. */ 139#ifdef __LITTLE_ENDIAN__ 140#define CROFF 0 141#else 142#define CROFF (RSIZE - CRSIZE) 143#endif 144 145/* This is the offset of the VMX reg pointer. */ 146#define VREGS 48*RSIZE+33*8 147 148/* Describe where general purpose regs are saved. */ 149#define EH_FRAME_GEN \ 150 cfa_save; \ 151 rsave ( 0, 0*RSIZE); \ 152 rsave ( 2, 2*RSIZE); \ 153 rsave ( 3, 3*RSIZE); \ 154 rsave ( 4, 4*RSIZE); \ 155 rsave ( 5, 5*RSIZE); \ 156 rsave ( 6, 6*RSIZE); \ 157 rsave ( 7, 7*RSIZE); \ 158 rsave ( 8, 8*RSIZE); \ 159 rsave ( 9, 9*RSIZE); \ 160 rsave (10, 10*RSIZE); \ 161 rsave (11, 11*RSIZE); \ 162 rsave (12, 12*RSIZE); \ 163 rsave (13, 13*RSIZE); \ 164 rsave (14, 14*RSIZE); \ 165 rsave (15, 15*RSIZE); \ 166 rsave (16, 16*RSIZE); \ 167 rsave (17, 17*RSIZE); \ 168 rsave (18, 18*RSIZE); \ 169 rsave (19, 19*RSIZE); \ 170 rsave (20, 20*RSIZE); \ 171 rsave (21, 21*RSIZE); \ 172 rsave (22, 22*RSIZE); \ 173 rsave (23, 23*RSIZE); \ 174 rsave (24, 24*RSIZE); \ 175 rsave (25, 25*RSIZE); \ 176 rsave (26, 26*RSIZE); \ 177 rsave (27, 27*RSIZE); \ 178 rsave (28, 28*RSIZE); \ 179 rsave (29, 29*RSIZE); \ 180 rsave (30, 30*RSIZE); \ 181 rsave (31, 31*RSIZE); \ 182 rsave (67, 32*RSIZE); /* ap, used as temp for nip */ \ 183 rsave (65, 36*RSIZE); /* lr */ \ 184 rsave (68, 38*RSIZE + CROFF); /* cr fields */ \ 185 rsave (69, 38*RSIZE + CROFF); \ 186 rsave (70, 38*RSIZE + CROFF); \ 187 rsave (71, 38*RSIZE + CROFF); \ 188 rsave (72, 38*RSIZE + CROFF); \ 189 rsave (73, 38*RSIZE + CROFF); \ 190 rsave (74, 38*RSIZE + CROFF); \ 191 rsave (75, 38*RSIZE + CROFF) 192 193/* Describe where the FP regs are saved. */ 194#define EH_FRAME_FP \ 195 rsave (32, 48*RSIZE + 0*8); \ 196 rsave (33, 48*RSIZE + 1*8); \ 197 rsave (34, 48*RSIZE + 2*8); \ 198 rsave (35, 48*RSIZE + 3*8); \ 199 rsave (36, 48*RSIZE + 4*8); \ 200 rsave (37, 48*RSIZE + 5*8); \ 201 rsave (38, 48*RSIZE + 6*8); \ 202 rsave (39, 48*RSIZE + 7*8); \ 203 rsave (40, 48*RSIZE + 8*8); \ 204 rsave (41, 48*RSIZE + 9*8); \ 205 rsave (42, 48*RSIZE + 10*8); \ 206 rsave (43, 48*RSIZE + 11*8); \ 207 rsave (44, 48*RSIZE + 12*8); \ 208 rsave (45, 48*RSIZE + 13*8); \ 209 rsave (46, 48*RSIZE + 14*8); \ 210 rsave (47, 48*RSIZE + 15*8); \ 211 rsave (48, 48*RSIZE + 16*8); \ 212 rsave (49, 48*RSIZE + 17*8); \ 213 rsave (50, 48*RSIZE + 18*8); \ 214 rsave (51, 48*RSIZE + 19*8); \ 215 rsave (52, 48*RSIZE + 20*8); \ 216 rsave (53, 48*RSIZE + 21*8); \ 217 rsave (54, 48*RSIZE + 22*8); \ 218 rsave (55, 48*RSIZE + 23*8); \ 219 rsave (56, 48*RSIZE + 24*8); \ 220 rsave (57, 48*RSIZE + 25*8); \ 221 rsave (58, 48*RSIZE + 26*8); \ 222 rsave (59, 48*RSIZE + 27*8); \ 223 rsave (60, 48*RSIZE + 28*8); \ 224 rsave (61, 48*RSIZE + 29*8); \ 225 rsave (62, 48*RSIZE + 30*8); \ 226 rsave (63, 48*RSIZE + 31*8) 227 228/* Describe where the VMX regs are saved. */ 229#ifdef CONFIG_ALTIVEC 230#define EH_FRAME_VMX \ 231 vsave_msr0 ( 0); \ 232 vsave_msr1 ( 1); \ 233 vsave_msr1 ( 2); \ 234 vsave_msr1 ( 3); \ 235 vsave_msr1 ( 4); \ 236 vsave_msr1 ( 5); \ 237 vsave_msr1 ( 6); \ 238 vsave_msr1 ( 7); \ 239 vsave_msr1 ( 8); \ 240 vsave_msr1 ( 9); \ 241 vsave_msr1 (10); \ 242 vsave_msr1 (11); \ 243 vsave_msr1 (12); \ 244 vsave_msr1 (13); \ 245 vsave_msr1 (14); \ 246 vsave_msr1 (15); \ 247 vsave_msr1 (16); \ 248 vsave_msr1 (17); \ 249 vsave_msr1 (18); \ 250 vsave_msr1 (19); \ 251 vsave_msr1 (20); \ 252 vsave_msr1 (21); \ 253 vsave_msr1 (22); \ 254 vsave_msr1 (23); \ 255 vsave_msr1 (24); \ 256 vsave_msr1 (25); \ 257 vsave_msr1 (26); \ 258 vsave_msr1 (27); \ 259 vsave_msr1 (28); \ 260 vsave_msr1 (29); \ 261 vsave_msr1 (30); \ 262 vsave_msr1 (31); \ 263 vsave_msr2 (33, 32*16+12); \ 264 vsave (32, 33*16) 265#else 266#define EH_FRAME_VMX 267#endif 268 269 .section .eh_frame,"a",@progbits 270.Lcie: 271 .long .Lcie_end - .Lcie_start 272.Lcie_start: 273 .long 0 /* CIE ID */ 274 .byte 1 /* Version number */ 275 .string "zRS" /* NUL-terminated augmentation string */ 276 .uleb128 4 /* Code alignment factor */ 277 .sleb128 -8 /* Data alignment factor */ 278 .byte 67 /* Return address register column, ap */ 279 .uleb128 1 /* Augmentation value length */ 280 .byte 0x14 /* DW_EH_PE_pcrel | DW_EH_PE_udata8. */ 281 .byte 0x0c,1,0 /* DW_CFA_def_cfa: r1 ofs 0 */ 282 .balign 8 283.Lcie_end: 284 285 .long .Lfde0_end - .Lfde0_start 286.Lfde0_start: 287 .long .Lfde0_start - .Lcie /* CIE pointer. */ 288 .quad .Lsigrt_start - . /* PC start, length */ 289 .quad .Lsigrt_end - .Lsigrt_start 290 .uleb128 0 /* Augmentation */ 291 EH_FRAME_GEN 292 EH_FRAME_FP 293 EH_FRAME_VMX 294# Do we really need to describe the frame at this point? ie. will 295# we ever have some call chain that returns somewhere past the addi? 296# I don't think so, since gcc doesn't support async signals. 297# .byte 0x41 /* DW_CFA_advance_loc 1*4 */ 298#undef PTREGS 299#define PTREGS 168+56 300# EH_FRAME_GEN 301# EH_FRAME_FP 302# EH_FRAME_VMX 303 .balign 8 304.Lfde0_end: 305
