1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2014 Freescale Semiconductor, Inc.
4 */
5
6 #include <linux/cpuidle.h>
7 #include <linux/cpu_pm.h>
8 #include <linux/module.h>
9 #include <asm/cacheflush.h>
10 #include <asm/cpuidle.h>
11 #include <asm/suspend.h>
12
13 #include "common.h"
14 #include "cpuidle.h"
15 #include "hardware.h"
16
imx6sx_idle_finish(unsigned long val)17 static int imx6sx_idle_finish(unsigned long val)
18 {
19 /*
20 * for Cortex-A7 which has an internal L2
21 * cache, need to flush it before powering
22 * down ARM platform, since flushing L1 cache
23 * here again has very small overhead, compared
24 * to adding conditional code for L2 cache type,
25 * just call flush_cache_all() is fine.
26 */
27 flush_cache_all();
28 cpu_do_idle();
29
30 return 0;
31 }
32
imx6sx_enter_wait(struct cpuidle_device * dev,struct cpuidle_driver * drv,int index)33 static int imx6sx_enter_wait(struct cpuidle_device *dev,
34 struct cpuidle_driver *drv, int index)
35 {
36 imx6_set_lpm(WAIT_UNCLOCKED);
37
38 switch (index) {
39 case 1:
40 cpu_do_idle();
41 break;
42 case 2:
43 imx6_enable_rbc(true);
44 imx_gpc_set_arm_power_in_lpm(true);
45 imx_set_cpu_jump(0, v7_cpu_resume);
46 /* Need to notify there is a cpu pm operation. */
47 cpu_pm_enter();
48 cpu_cluster_pm_enter();
49
50 cpu_suspend(0, imx6sx_idle_finish);
51
52 cpu_cluster_pm_exit();
53 cpu_pm_exit();
54 imx_gpc_set_arm_power_in_lpm(false);
55 imx6_enable_rbc(false);
56 break;
57 default:
58 break;
59 }
60
61 imx6_set_lpm(WAIT_CLOCKED);
62
63 return index;
64 }
65
66 static struct cpuidle_driver imx6sx_cpuidle_driver = {
67 .name = "imx6sx_cpuidle",
68 .owner = THIS_MODULE,
69 .states = {
70 /* WFI */
71 ARM_CPUIDLE_WFI_STATE,
72 /* WAIT */
73 {
74 .exit_latency = 50,
75 .target_residency = 75,
76 .flags = CPUIDLE_FLAG_TIMER_STOP,
77 .enter = imx6sx_enter_wait,
78 .name = "WAIT",
79 .desc = "Clock off",
80 },
81 /* WAIT + ARM power off */
82 {
83 /*
84 * ARM gating 31us * 5 + RBC clear 65us
85 * and some margin for SW execution, here set it
86 * to 300us.
87 */
88 .exit_latency = 300,
89 .target_residency = 500,
90 .flags = CPUIDLE_FLAG_TIMER_STOP,
91 .enter = imx6sx_enter_wait,
92 .name = "LOW-POWER-IDLE",
93 .desc = "ARM power off",
94 },
95 },
96 .state_count = 3,
97 .safe_state_index = 0,
98 };
99
imx6sx_cpuidle_init(void)100 int __init imx6sx_cpuidle_init(void)
101 {
102 imx6_set_int_mem_clk_lpm(true);
103 imx6_enable_rbc(false);
104 imx_gpc_set_l2_mem_power_in_lpm(false);
105 /*
106 * set ARM power up/down timing to the fastest,
107 * sw2iso and sw can be set to one 32K cycle = 31us
108 * except for power up sw2iso which need to be
109 * larger than LDO ramp up time.
110 */
111 imx_gpc_set_arm_power_up_timing(cpu_is_imx6sx() ? 0xf : 0x2, 1);
112 imx_gpc_set_arm_power_down_timing(1, 1);
113
114 return cpuidle_register(&imx6sx_cpuidle_driver, NULL);
115 }
116
