1/* 2 * Copyright 2016 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include "sunxi-common-regulators.dtsi" 44 45#include <dt-bindings/gpio/gpio.h> 46#include <dt-bindings/input/input.h> 47 48/ { 49 aliases { 50 serial0 = &uart0; 51 }; 52 53 chosen { 54 stdout-path = "serial0:115200n8"; 55 }; 56}; 57 58&cpu0 { 59 cpu-supply = <®_dcdc3>; 60}; 61 62&ehci0 { 63 /* Wifi is connected here */ 64 status = "okay"; 65}; 66 67&mmc0 { 68 pinctrl-names = "default"; 69 pinctrl-0 = <&mmc0_pins>; 70 vmmc-supply = <®_dcdc1>; 71 bus-width = <4>; 72 cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ 73 status = "okay"; 74}; 75 76&p2wi { 77 status = "okay"; 78 79 axp22x: pmic@68 { 80 compatible = "x-powers,axp221"; 81 reg = <0x68>; 82 interrupt-parent = <&nmi_intc>; 83 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 84 drivevbus-supply = <®_vcc5v0>; 85 x-powers,drive-vbus-en; 86 }; 87}; 88 89#include "axp22x.dtsi" 90 91®_aldo3 { 92 regulator-always-on; 93 regulator-min-microvolt = <2700000>; 94 regulator-max-microvolt = <3300000>; 95 regulator-name = "avcc"; 96}; 97 98®_dc1sw { 99 regulator-name = "vcc-lcd"; 100}; 101 102®_dc5ldo { 103 regulator-always-on; 104 regulator-min-microvolt = <700000>; 105 regulator-max-microvolt = <1320000>; 106 regulator-name = "vdd-cpus"; /* This is an educated guess */ 107}; 108 109®_dcdc1 { 110 regulator-always-on; 111 regulator-min-microvolt = <3000000>; 112 regulator-max-microvolt = <3000000>; 113 regulator-name = "vcc-3v0"; 114}; 115 116®_dcdc2 { 117 regulator-min-microvolt = <700000>; 118 regulator-max-microvolt = <1320000>; 119 regulator-name = "vdd-gpu"; 120}; 121 122®_dcdc3 { 123 regulator-always-on; 124 regulator-min-microvolt = <700000>; 125 regulator-max-microvolt = <1320000>; 126 regulator-name = "vdd-cpu"; 127}; 128 129®_dcdc4 { 130 regulator-always-on; 131 regulator-min-microvolt = <700000>; 132 regulator-max-microvolt = <1320000>; 133 regulator-name = "vdd-sys-dll"; 134}; 135 136®_dcdc5 { 137 regulator-always-on; 138 regulator-min-microvolt = <1500000>; 139 regulator-max-microvolt = <1500000>; 140 regulator-name = "vcc-dram"; 141}; 142 143®_dldo1 { 144 regulator-min-microvolt = <3300000>; 145 regulator-max-microvolt = <3300000>; 146 regulator-name = "vcc-wifi"; 147}; 148 149®_drivevbus { 150 regulator-name = "usb0-vbus"; 151 status = "okay"; 152}; 153 154&simplefb_lcd { 155 vcc-lcd-supply = <®_dc1sw>; 156}; 157 158&usb_otg { 159 dr_mode = "otg"; 160 status = "okay"; 161}; 162 163&usb_power_supply { 164 status = "okay"; 165}; 166 167&usbphy { 168 usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */ 169 usb0_vbus_power-supply = <&usb_power_supply>; 170 usb0_vbus-supply = <®_drivevbus>; 171 usb1_vbus-supply = <®_dldo1>; 172 status = "okay"; 173}; 174