1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/input/input.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49#include <dt-bindings/pwm/pwm.h>
50
51/ {
52	model = "Point of View Protab2-IPS9";
53	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
54
55	aliases {
56		serial0 = &uart0;
57	};
58
59	backlight: backlight {
60		compatible = "pwm-backlight";
61		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
62		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
63		default-brightness-level = <8>;
64		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
65	};
66
67	chosen {
68		stdout-path = "serial0:115200n8";
69	};
70};
71
72&codec {
73	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
74	status = "okay";
75};
76
77&cpu0 {
78	cpu-supply = <&reg_dcdc2>;
79};
80
81&ehci0 {
82	status = "okay";
83};
84
85&i2c0 {
86	status = "okay";
87
88	axp209: pmic@34 {
89		reg = <0x34>;
90		interrupts = <0>;
91	};
92};
93
94#include "axp209.dtsi"
95
96&i2c1 {
97	/* pull-ups and devices require AXP209 LDO3 */
98	status = "failed";
99};
100
101&i2c2 {
102	status = "okay";
103
104	touchscreen@5c {
105		compatible = "pixcir,pixcir_tangoc";
106		reg = <0x5c>;
107		interrupt-parent = <&pio>;
108		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
109		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
110		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
111		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
112		touchscreen-size-x = <1024>;
113		touchscreen-size-y = <768>;
114		touchscreen-inverted-x;
115		touchscreen-inverted-y;
116	};
117};
118
119&lradc {
120	vref-supply = <&reg_ldo2>;
121	status = "okay";
122
123	button-400 {
124		label = "Volume Up";
125		linux,code = <KEY_VOLUMEUP>;
126		channel = <0>;
127		voltage = <400000>;
128	};
129
130	button-800 {
131		label = "Volume Down";
132		linux,code = <KEY_VOLUMEDOWN>;
133		channel = <0>;
134		voltage = <800000>;
135	};
136};
137
138&mmc0 {
139	vmmc-supply = <&reg_vcc3v3>;
140	bus-width = <4>;
141	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
142	status = "okay";
143};
144
145&otg_sram {
146	status = "okay";
147};
148
149&pwm {
150	pinctrl-names = "default";
151	pinctrl-0 = <&pwm0_pin>;
152	status = "okay";
153};
154
155&reg_dcdc2 {
156	regulator-always-on;
157	regulator-min-microvolt = <1000000>;
158	regulator-max-microvolt = <1400000>;
159	regulator-name = "vdd-cpu";
160};
161
162&reg_dcdc3 {
163	regulator-always-on;
164	regulator-min-microvolt = <1250000>;
165	regulator-max-microvolt = <1250000>;
166	regulator-name = "vdd-int-dll";
167};
168
169&reg_ldo1 {
170	regulator-name = "vdd-rtc";
171};
172
173&reg_ldo2 {
174	regulator-always-on;
175	regulator-min-microvolt = <3000000>;
176	regulator-max-microvolt = <3000000>;
177	regulator-name = "avcc";
178};
179
180&reg_usb0_vbus {
181	status = "okay";
182};
183
184&reg_usb1_vbus {
185	status = "okay";
186};
187
188&uart0 {
189	pinctrl-names = "default";
190	pinctrl-0 = <&uart0_pb_pins>;
191	status = "okay";
192};
193
194&usb_otg {
195	dr_mode = "otg";
196	status = "okay";
197};
198
199&usbphy {
200	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
201	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
202	usb0_vbus-supply = <&reg_usb0_vbus>;
203	usb1_vbus-supply = <&reg_usb1_vbus>;
204	status = "okay";
205};
206