1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Samsung's Exynos4412 based Galaxy S3 board device tree source 4 * 5 * Copyright (c) 2013 Samsung Electronics Co., Ltd. 6 * http://www.samsung.com 7 */ 8 9/dts-v1/; 10#include "exynos4412-midas.dtsi" 11 12/ { 13 aliases { 14 i2c9 = &i2c_ak8975; 15 i2c10 = &i2c_cm36651; 16 }; 17 18 aat1290 { 19 compatible = "skyworks,aat1290"; 20 flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; 21 enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; 22 23 pinctrl-names = "default", "host", "isp"; 24 pinctrl-0 = <&camera_flash_host>; 25 pinctrl-1 = <&camera_flash_host>; 26 pinctrl-2 = <&camera_flash_isp>; 27 28 flash-led { 29 label = "flash"; 30 led-max-microamp = <520833>; 31 flash-max-microamp = <1012500>; 32 flash-max-timeout-us = <1940000>; 33 }; 34 }; 35 36 lcd_vdd3_reg: voltage-regulator-10 { 37 compatible = "regulator-fixed"; 38 regulator-name = "LCD_VDD_2.2V"; 39 regulator-min-microvolt = <2200000>; 40 regulator-max-microvolt = <2200000>; 41 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; 42 enable-active-high; 43 }; 44 45 ps_als_reg: voltage-regulator-11 { 46 compatible = "regulator-fixed"; 47 regulator-name = "LED_A_3.0V"; 48 regulator-min-microvolt = <3000000>; 49 regulator-max-microvolt = <3000000>; 50 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; 51 enable-active-high; 52 }; 53 54 i2c_ak8975: i2c-gpio-0 { 55 compatible = "i2c-gpio"; 56 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 57 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 58 i2c-gpio,delay-us = <2>; 59 #address-cells = <1>; 60 #size-cells = <0>; 61 status = "okay"; 62 63 ak8975@c { 64 compatible = "asahi-kasei,ak8975"; 65 reg = <0x0c>; 66 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; 67 }; 68 }; 69 70 i2c_cm36651: i2c-gpio-2 { 71 compatible = "i2c-gpio"; 72 sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 73 scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 74 i2c-gpio,delay-us = <2>; 75 #address-cells = <1>; 76 #size-cells = <0>; 77 78 cm36651@18 { 79 compatible = "capella,cm36651"; 80 reg = <0x18>; 81 interrupt-parent = <&gpx0>; 82 interrupts = <2 IRQ_TYPE_EDGE_FALLING>; 83 vled-supply = <&ps_als_reg>; 84 }; 85 }; 86}; 87 88&buck9_reg { 89 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; 90}; 91 92&cam_af_reg { 93 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; 94 status = "okay"; 95}; 96 97&cam_io_reg { 98 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; 99 status = "okay"; 100}; 101 102&dsi_0 { 103 status = "okay"; 104 105 panel@0 { 106 compatible = "samsung,s6e8aa0"; 107 reg = <0>; 108 vdd3-supply = <&lcd_vdd3_reg>; 109 vci-supply = <&ldo25_reg>; 110 reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; 111 power-on-delay= <50>; 112 reset-delay = <100>; 113 init-delay = <100>; 114 flip-horizontal; 115 flip-vertical; 116 panel-width-mm = <58>; 117 panel-height-mm = <103>; 118 119 display-timings { 120 timing-0 { 121 clock-frequency = <57153600>; 122 hactive = <720>; 123 vactive = <1280>; 124 hfront-porch = <5>; 125 hback-porch = <5>; 126 hsync-len = <5>; 127 vfront-porch = <13>; 128 vback-porch = <1>; 129 vsync-len = <2>; 130 }; 131 }; 132 }; 133}; 134 135&i2c_3 { 136 mms114-touchscreen@48 { 137 compatible = "melfas,mms114"; 138 reg = <0x48>; 139 interrupt-parent = <&gpm2>; 140 interrupts = <3 IRQ_TYPE_EDGE_FALLING>; 141 touchscreen-size-x = <720>; 142 touchscreen-size-y = <1280>; 143 avdd-supply = <&ldo23_reg>; 144 vdd-supply = <&ldo24_reg>; 145 }; 146}; 147 148&ldo25_reg { 149 regulator-name = "LCD_VCC_3.3V"; 150 regulator-min-microvolt = <2800000>; 151 regulator-max-microvolt = <2800000>; 152}; 153 154&pinctrl_0 { 155 camera_flash_host: camera-flash-host { 156 samsung,pins = "gpj1-0"; 157 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; 158 samsung,pin-val = <0>; 159 }; 160 161 camera_flash_isp: camera-flash-isp { 162 samsung,pins = "gpj1-0"; 163 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; 164 samsung,pin-val = <1>; 165 }; 166}; 167 168&s5c73m3 { 169 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ 170 vdda-supply = <&ldo17_reg>; 171 status = "okay"; 172}; 173 174&sound { 175 samsung,audio-routing = 176 "HP", "HPOUT1L", 177 "HP", "HPOUT1R", 178 179 "SPK", "SPKOUTLN", 180 "SPK", "SPKOUTLP", 181 "SPK", "SPKOUTRN", 182 "SPK", "SPKOUTRP", 183 184 "RCV", "HPOUT2N", 185 "RCV", "HPOUT2P", 186 187 "HDMI", "LINEOUT1N", 188 "HDMI", "LINEOUT1P", 189 190 "LINE", "LINEOUT2N", 191 "LINE", "LINEOUT2P", 192 193 "IN1LP", "MICBIAS1", 194 "IN1LN", "MICBIAS1", 195 "Main Mic", "MICBIAS1", 196 197 "IN1RP", "Sub Mic", 198 "IN1RN", "Sub Mic", 199 200 "IN2LP:VXRN", "MICBIAS2", 201 "Headset Mic", "MICBIAS2", 202 203 "IN2RN", "FM In", 204 "IN2RP:VXRP", "FM In"; 205}; 206 207&submic_bias_reg { 208 gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>; 209 enable-active-high; 210}; 211 212&touchkey_reg { 213 gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; 214 status = "okay"; 215}; 216