1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2016 Luxul Inc.
4 */
5
6/dts-v1/;
7
8#include "bcm47094.dtsi"
9#include "bcm5301x-nand-cs0-bch4.dtsi"
10
11/ {
12	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
13	model = "Luxul XWR-3100 V1";
14
15	chosen {
16		bootargs = "console=ttyS0,115200 earlycon";
17	};
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x00000000 0x08000000
22		       0x88000000 0x08000000>;
23	};
24
25	leds {
26		compatible = "gpio-leds";
27
28		power	{
29			label = "bcm53xx:green:power";
30			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
31			linux,default-trigger = "default-on";
32		};
33
34		lan3	{
35			label = "bcm53xx:green:lan3";
36			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
37		};
38
39		lan4	{
40			label = "bcm53xx:green:lan4";
41			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
42		};
43
44		wan	{
45			label = "bcm53xx:green:wan";
46			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
47		};
48
49		lan1	{
50			label = "bcm53xx:green:lan1";
51			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
52		};
53
54		lan2	{
55			label = "bcm53xx:green:lan2";
56			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
57		};
58
59		usb3	{
60			label = "bcm53xx:green:usb3";
61			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
62			trigger-sources = <&ohci_port1>, <&ehci_port1>,
63					  <&xhci_port1>;
64			linux,default-trigger = "usbport";
65		};
66
67		status	{
68			label = "bcm53xx:green:status";
69			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
70			linux,default-trigger = "timer";
71		};
72
73		2ghz {
74			label = "bcm53xx:green:2ghz";
75			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
76		};
77
78		5ghz {
79			label = "bcm53xx:green:5ghz";
80			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
81		};
82	};
83
84	gpio-keys {
85		compatible = "gpio-keys";
86
87		restart {
88			label = "Reset";
89			linux,code = <KEY_RESTART>;
90			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
91		};
92	};
93};
94
95&usb3 {
96	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
97};
98
99&spi_nor {
100	status = "okay";
101};
102
103&usb3_phy {
104	status = "okay";
105};
106
107&srab {
108	status = "okay";
109
110	ports {
111		#address-cells = <1>;
112		#size-cells = <0>;
113
114		port@0 {
115			reg = <0>;
116			label = "lan4";
117		};
118
119		port@1 {
120			reg = <1>;
121			label = "lan3";
122		};
123
124		port@2 {
125			reg = <2>;
126			label = "lan2";
127		};
128
129		port@3 {
130			reg = <3>;
131			label = "lan1";
132		};
133
134		port@4 {
135			reg = <4>;
136			label = "wan";
137		};
138
139		port@5 {
140			reg = <5>;
141			label = "cpu";
142			ethernet = <&gmac0>;
143		};
144	};
145};
146