1Samsung Exynos SoC USB controller
2
3The USB devices interface with USB controllers on Exynos SOCs.
4The device node has following properties.
5
6EHCI
7Required properties:
8 - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
9   EHCI controller in host mode.
10 - reg: physical base address of the controller and length of memory mapped
11   region.
12 - interrupts: interrupt number to the cpu.
13 - clocks: from common clock binding: handle to usb clock.
14 - clock-names: from common clock binding: Shall be "usbhost".
15 - phys: from the *Generic PHY* bindings; array specifying phy(s) used
16   by the root port.
17 - phy-names: from the *Generic PHY* bindings; array of the names for
18   each phy for the root ports, must be a subset of the following:
19   "host", "hsic0", "hsic1".
20
21Optional properties:
22 - samsung,vbus-gpio:  if present, specifies the GPIO that
23   needs to be pulled up for the bus to be powered.
24
25Example:
26
27	usb@12110000 {
28		compatible = "samsung,exynos4210-ehci";
29		reg = <0x12110000 0x100>;
30		interrupts = <0 71 0>;
31		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
32
33		clocks = <&clock 285>;
34		clock-names = "usbhost";
35
36		phys = <&usb2phy 1>;
37		phy-names = "host";
38	};
39
40OHCI
41Required properties:
42 - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
43   OHCI companion controller in host mode.
44 - reg: physical base address of the controller and length of memory mapped
45   region.
46 - interrupts: interrupt number to the cpu.
47 - clocks: from common clock binding: handle to usb clock.
48 - clock-names: from common clock binding: Shall be "usbhost".
49 - phys: from the *Generic PHY* bindings; array specifying phy(s) used
50   by the root port.
51 - phy-names: from the *Generic PHY* bindings; array of the names for
52   each phy for the root ports, must be a subset of the following:
53   "host", "hsic0", "hsic1".
54
55Example:
56	usb@12120000 {
57		compatible = "samsung,exynos4210-ohci";
58		reg = <0x12120000 0x100>;
59		interrupts = <0 71 0>;
60
61		clocks = <&clock 285>;
62		clock-names = "usbhost";
63
64		phys = <&usb2phy 1>;
65		phy-names = "host";
66	};
67
68DWC3
69Required properties:
70 - compatible: should be one of the following -
71	       "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
72					    Exynos5250/5420.
73	       "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on
74					    Exynos5433.
75	       "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
76 - #address-cells, #size-cells : should be '1' if the device has sub-nodes
77				 with 'reg' property.
78 - ranges: allows valid 1:1 translation between child's address space and
79	   parent's address space
80 - clocks: Clock IDs array as required by the controller.
81 - clock-names: Names of clocks corresponding to IDs in the clock property.
82                Following clock names shall be provided for different
83                compatibles:
84                 - samsung,exynos5250-dwusb3: "usbdrd30",
85                 - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk",
86                                              "phyclk",
87                 - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk",
88                                           "usbdrd30_axius_clk"
89 - vdd10-supply: 1.0V powr supply
90 - vdd33-supply: 3.0V/3.3V power supply
91
92Sub-nodes:
93The dwc3 core should be added as subnode to Exynos dwc3 glue.
94- dwc3 :
95   The binding details of dwc3 can be found in:
96   Documentation/devicetree/bindings/usb/dwc3.txt
97
98Example:
99	usb@12000000 {
100		compatible = "samsung,exynos5250-dwusb3";
101		clocks = <&clock 286>;
102		clock-names = "usbdrd30";
103		#address-cells = <1>;
104		#size-cells = <1>;
105		ranges;
106		vdd10-supply = <&ldo11_reg>;
107		vdd33-supply = <&ldo9_reg>;
108
109		dwc3 {
110			compatible = "synopsys,dwc3";
111			reg = <0x12000000 0x10000>;
112			interrupts = <0 72 0>;
113			usb-phy = <&usb2_phy &usb3_phy>;
114		};
115	};
116