1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * PMC MSP EHCI (Host Controller Driver) for USB.
4  *
5  * (C) Copyright 2006-2010 PMC-Sierra Inc
6  */
7 
8 /* includes */
9 #include <linux/platform_device.h>
10 #include <linux/gpio.h>
11 #include <linux/usb.h>
12 #include <msp_usb.h>
13 
14 /* stream disable*/
15 #define USB_CTRL_MODE_STREAM_DISABLE	0x10
16 
17 /* threshold */
18 #define USB_CTRL_FIFO_THRESH		0x00300000
19 
20 /* register offset for usb_mode */
21 #define USB_EHCI_REG_USB_MODE		0x68
22 
23 /* register offset for usb fifo */
24 #define USB_EHCI_REG_USB_FIFO		0x24
25 
26 /* register offset for usb status */
27 #define USB_EHCI_REG_USB_STATUS		0x44
28 
29 /* serial/parallel transceiver */
30 #define USB_EHCI_REG_BIT_STAT_STS	(1<<29)
31 
32 /* TWI USB0 host device pin */
33 #define MSP_PIN_USB0_HOST_DEV		49
34 
35 /* TWI USB1 host device pin */
36 #define MSP_PIN_USB1_HOST_DEV		50
37 
38 
usb_hcd_tdi_set_mode(struct ehci_hcd * ehci)39 static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
40 {
41 	u8 *base;
42 	u8 *statreg;
43 	u8 *fiforeg;
44 	u32 val;
45 	struct ehci_regs *reg_base = ehci->regs;
46 
47 	/* get register base */
48 	base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
49 	statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
50 	fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
51 
52 	/* Disable controller mode stream */
53 	val = ehci_readl(ehci, (u32 *)base);
54 	ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
55 			(u32 *)base);
56 
57 	/* clear STS to select parallel transceiver interface */
58 	val = ehci_readl(ehci, (u32 *)statreg);
59 	val = val & ~USB_EHCI_REG_BIT_STAT_STS;
60 	ehci_writel(ehci, val, (u32 *)statreg);
61 
62 	/* write to set the proper fifo threshold */
63 	ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
64 
65 	/* set TWI GPIO USB_HOST_DEV pin high */
66 	gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
67 }
68 
69 /* called during probe() after chip reset completes */
ehci_msp_setup(struct usb_hcd * hcd)70 static int ehci_msp_setup(struct usb_hcd *hcd)
71 {
72 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
73 	int			retval;
74 
75 	ehci->big_endian_mmio = 1;
76 	ehci->big_endian_desc = 1;
77 
78 	ehci->caps = hcd->regs;
79 	hcd->has_tt = 1;
80 
81 	retval = ehci_setup(hcd);
82 	if (retval)
83 		return retval;
84 
85 	usb_hcd_tdi_set_mode(ehci);
86 
87 	return retval;
88 }
89 
90 
91 /* configure so an HC device and id are always provided
92  * always called with process context; sleeping is OK
93  */
94 
usb_hcd_msp_map_regs(struct mspusb_device * dev)95 static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
96 {
97 	struct resource *res;
98 	struct platform_device *pdev = &dev->dev;
99 	u32 res_len;
100 	int retval;
101 
102 	/* MAB register space */
103 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
104 	if (res == NULL)
105 		return -ENOMEM;
106 	res_len = resource_size(res);
107 	if (!request_mem_region(res->start, res_len, "mab regs"))
108 		return -EBUSY;
109 
110 	dev->mab_regs = ioremap_nocache(res->start, res_len);
111 	if (dev->mab_regs == NULL) {
112 		retval = -ENOMEM;
113 		goto err1;
114 	}
115 
116 	/* MSP USB register space */
117 	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
118 	if (res == NULL) {
119 		retval = -ENOMEM;
120 		goto err2;
121 	}
122 	res_len = resource_size(res);
123 	if (!request_mem_region(res->start, res_len, "usbid regs")) {
124 		retval = -EBUSY;
125 		goto err2;
126 	}
127 	dev->usbid_regs = ioremap_nocache(res->start, res_len);
128 	if (dev->usbid_regs == NULL) {
129 		retval = -ENOMEM;
130 		goto err3;
131 	}
132 
133 	return 0;
134 err3:
135 	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
136 	res_len = resource_size(res);
137 	release_mem_region(res->start, res_len);
138 err2:
139 	iounmap(dev->mab_regs);
140 err1:
141 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
142 	res_len = resource_size(res);
143 	release_mem_region(res->start, res_len);
144 	dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
145 	return retval;
146 }
147 
148 /**
149  * usb_hcd_msp_probe - initialize PMC MSP-based HCDs
150  * Context: !in_interrupt()
151  *
152  * Allocates basic resources for this USB host controller, and
153  * then invokes the start() method for the HCD associated with it
154  * through the hotplug entry's driver_data.
155  *
156  */
usb_hcd_msp_probe(const struct hc_driver * driver,struct platform_device * dev)157 int usb_hcd_msp_probe(const struct hc_driver *driver,
158 			  struct platform_device *dev)
159 {
160 	int retval;
161 	struct usb_hcd *hcd;
162 	struct resource *res;
163 	struct ehci_hcd		*ehci ;
164 
165 	hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
166 	if (!hcd)
167 		return -ENOMEM;
168 
169 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
170 	if (res == NULL) {
171 		pr_debug("No IOMEM resource info for %s.\n", dev->name);
172 		retval = -ENOMEM;
173 		goto err1;
174 	}
175 	hcd->rsrc_start = res->start;
176 	hcd->rsrc_len = resource_size(res);
177 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
178 		retval = -EBUSY;
179 		goto err1;
180 	}
181 	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
182 	if (!hcd->regs) {
183 		pr_debug("ioremap failed");
184 		retval = -ENOMEM;
185 		goto err2;
186 	}
187 
188 	res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
189 	if (res == NULL) {
190 		dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
191 		retval = -ENOMEM;
192 		goto err3;
193 	}
194 
195 	/* Map non-EHCI register spaces */
196 	retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
197 	if (retval != 0)
198 		goto err3;
199 
200 	ehci = hcd_to_ehci(hcd);
201 	ehci->big_endian_mmio = 1;
202 	ehci->big_endian_desc = 1;
203 
204 
205 	retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
206 	if (retval == 0) {
207 		device_wakeup_enable(hcd->self.controller);
208 		return 0;
209 	}
210 
211 	usb_remove_hcd(hcd);
212 err3:
213 	iounmap(hcd->regs);
214 err2:
215 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
216 err1:
217 	usb_put_hcd(hcd);
218 
219 	return retval;
220 }
221 
222 
223 
224 /**
225  * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
226  * @dev: USB Host Controller being removed
227  * Context: !in_interrupt()
228  *
229  * Reverses the effect of usb_hcd_msp_probe(), first invoking
230  * the HCD's stop() method.  It is always called from a thread
231  * context, normally "rmmod", "apmd", or something similar.
232  *
233  * may be called without controller electrically present
234  * may be called with controller, bus, and devices active
235  */
usb_hcd_msp_remove(struct usb_hcd * hcd,struct platform_device * dev)236 void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
237 {
238 	usb_remove_hcd(hcd);
239 	iounmap(hcd->regs);
240 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
241 	usb_put_hcd(hcd);
242 }
243 
244 static const struct hc_driver ehci_msp_hc_driver = {
245 	.description =		hcd_name,
246 	.product_desc =		"PMC MSP EHCI",
247 	.hcd_priv_size =	sizeof(struct ehci_hcd),
248 
249 	/*
250 	 * generic hardware linkage
251 	 */
252 	.irq =			ehci_irq,
253 	.flags =		HCD_MEMORY | HCD_USB2 | HCD_BH,
254 
255 	/*
256 	 * basic lifecycle operations
257 	 */
258 	.reset			= ehci_msp_setup,
259 	.shutdown		= ehci_shutdown,
260 	.start			= ehci_run,
261 	.stop			= ehci_stop,
262 
263 	/*
264 	 * managing i/o requests and associated device resources
265 	 */
266 	.urb_enqueue		= ehci_urb_enqueue,
267 	.urb_dequeue		= ehci_urb_dequeue,
268 	.endpoint_disable	= ehci_endpoint_disable,
269 	.endpoint_reset		= ehci_endpoint_reset,
270 
271 	/*
272 	 * scheduling support
273 	 */
274 	.get_frame_number	= ehci_get_frame,
275 
276 	/*
277 	 * root hub support
278 	 */
279 	.hub_status_data	= ehci_hub_status_data,
280 	.hub_control		= ehci_hub_control,
281 	.bus_suspend		= ehci_bus_suspend,
282 	.bus_resume		= ehci_bus_resume,
283 	.relinquish_port	= ehci_relinquish_port,
284 	.port_handed_over	= ehci_port_handed_over,
285 
286 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
287 };
288 
ehci_hcd_msp_drv_probe(struct platform_device * pdev)289 static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
290 {
291 	int ret;
292 
293 	pr_debug("In ehci_hcd_msp_drv_probe");
294 
295 	if (usb_disabled())
296 		return -ENODEV;
297 
298 	gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
299 
300 	ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
301 
302 	return ret;
303 }
304 
ehci_hcd_msp_drv_remove(struct platform_device * pdev)305 static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
306 {
307 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
308 
309 	usb_hcd_msp_remove(hcd, pdev);
310 
311 	/* free TWI GPIO USB_HOST_DEV pin */
312 	gpio_free(MSP_PIN_USB0_HOST_DEV);
313 
314 	return 0;
315 }
316 
317 MODULE_ALIAS("pmcmsp-ehci");
318 
319 static struct platform_driver ehci_hcd_msp_driver = {
320 	.probe		= ehci_hcd_msp_drv_probe,
321 	.remove		= ehci_hcd_msp_drv_remove,
322 	.driver		= {
323 		.name	= "pmcmsp-ehci",
324 	},
325 };
326