1config USB_DWC2
2	tristate "DesignWare USB2 DRD Core Support"
3	depends on HAS_DMA
4	depends on USB || USB_GADGET
5	depends on HAS_IOMEM
6	help
7	  Say Y here if your system has a Dual Role Hi-Speed USB
8	  controller based on the DesignWare HSOTG IP Core.
9
10	  For host mode, if you choose to build the driver as dynamically
11	  linked modules, the core module will be called dwc2.ko, the PCI
12	  bus interface module (if you have a PCI bus system) will be
13	  called dwc2_pci.ko, and the platform interface module (for
14	  controllers directly connected to the CPU) will be called
15	  dwc2_platform.ko. For all modes(host, gadget and dual-role), there
16	  will be an additional module named dwc2.ko.
17
18if USB_DWC2
19
20choice
21	bool "DWC2 Mode Selection"
22	default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
23	default USB_DWC2_HOST if (USB && !USB_GADGET)
24	default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
25
26config USB_DWC2_HOST
27	bool "Host only mode"
28	depends on USB=y || (USB_DWC2=m && USB)
29	help
30	  The Designware USB2.0 high-speed host controller
31	  integrated into many SoCs. Select this option if you want the
32	  driver to operate in Host-only mode.
33
34comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
35
36config USB_DWC2_PERIPHERAL
37	bool "Gadget only mode"
38	depends on USB_GADGET=y || USB_GADGET=USB_DWC2
39	help
40	  The Designware USB2.0 high-speed gadget controller
41	  integrated into many SoCs. Select this option if you want the
42	  driver to operate in Peripheral-only mode. This option requires
43	  USB_GADGET to be enabled.
44
45config USB_DWC2_DUAL_ROLE
46	bool "Dual Role mode"
47	depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET)
48	help
49	  Select this option if you want the driver to work in a dual-role
50	  mode. In this mode both host and gadget features are enabled, and
51	  the role will be determined by the cable that gets plugged-in. This
52	  option requires USB_GADGET to be enabled.
53endchoice
54
55config USB_DWC2_PCI
56	tristate "DWC2 PCI"
57	depends on USB_PCI
58	depends on USB_GADGET || !USB_GADGET
59	default n
60	select NOP_USB_XCEIV
61	help
62	  The Designware USB2.0 PCI interface module for controllers
63	  connected to a PCI bus.
64
65config USB_DWC2_DEBUG
66	bool "Enable Debugging Messages"
67	help
68	  Say Y here to enable debugging messages in the DWC2 Driver.
69
70config USB_DWC2_VERBOSE
71	bool "Enable Verbose Debugging Messages"
72	depends on USB_DWC2_DEBUG
73	help
74	  Say Y here to enable verbose debugging messages in the DWC2 Driver.
75	  WARNING: Enabling this will quickly fill your message log.
76	  If in doubt, say N.
77
78config USB_DWC2_TRACK_MISSED_SOFS
79	bool "Enable Missed SOF Tracking"
80	help
81	  Say Y here to enable logging of missed SOF events to the dmesg log.
82	  WARNING: This feature is still experimental.
83	  If in doubt, say N.
84
85config USB_DWC2_DEBUG_PERIODIC
86	bool "Enable Debugging Messages For Periodic Transfers"
87	depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE
88	default y
89	help
90	  Say N here to disable (verbose) debugging messages to be
91	  logged for periodic transfers. This allows better debugging of
92	  non-periodic transfers, but of course the debug logs will be
93	  incomplete. Note that this also disables some debug messages
94	  for which the transfer type cannot be deduced.
95endif
96