1 /*
2 * via686a.c - Part of lm_sensors, Linux kernel modules
3 * for hardware monitoring
4 *
5 * Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
6 * Kyösti Mälkki <kmalkki@cc.hut.fi>,
7 * Mark Studebaker <mdsxyz123@yahoo.com>,
8 * and Bob Dougherty <bobd@stanford.edu>
9 *
10 * (Some conversion-factor data were contributed by Jonathan Teh Soon Yew
11 * <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 */
27
28 /*
29 * Supports the Via VT82C686A, VT82C686B south bridges.
30 * Reports all as a 686A.
31 * Warning - only supports a single device.
32 */
33
34 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
35
36 #include <linux/module.h>
37 #include <linux/slab.h>
38 #include <linux/pci.h>
39 #include <linux/jiffies.h>
40 #include <linux/platform_device.h>
41 #include <linux/hwmon.h>
42 #include <linux/hwmon-sysfs.h>
43 #include <linux/err.h>
44 #include <linux/init.h>
45 #include <linux/mutex.h>
46 #include <linux/sysfs.h>
47 #include <linux/acpi.h>
48 #include <linux/io.h>
49
50
51 /*
52 * If force_addr is set to anything different from 0, we forcibly enable
53 * the device at the given address.
54 */
55 static unsigned short force_addr;
56 module_param(force_addr, ushort, 0);
57 MODULE_PARM_DESC(force_addr,
58 "Initialize the base address of the sensors");
59
60 static struct platform_device *pdev;
61
62 /*
63 * The Via 686a southbridge has a LM78-like chip integrated on the same IC.
64 * This driver is a customized copy of lm78.c
65 */
66
67 /* Many VIA686A constants specified below */
68
69 /* Length of ISA address segment */
70 #define VIA686A_EXTENT 0x80
71 #define VIA686A_BASE_REG 0x70
72 #define VIA686A_ENABLE_REG 0x74
73
74 /* The VIA686A registers */
75 /* ins numbered 0-4 */
76 #define VIA686A_REG_IN_MAX(nr) (0x2b + ((nr) * 2))
77 #define VIA686A_REG_IN_MIN(nr) (0x2c + ((nr) * 2))
78 #define VIA686A_REG_IN(nr) (0x22 + (nr))
79
80 /* fans numbered 1-2 */
81 #define VIA686A_REG_FAN_MIN(nr) (0x3a + (nr))
82 #define VIA686A_REG_FAN(nr) (0x28 + (nr))
83
84 /* temps numbered 1-3 */
85 static const u8 VIA686A_REG_TEMP[] = { 0x20, 0x21, 0x1f };
86 static const u8 VIA686A_REG_TEMP_OVER[] = { 0x39, 0x3d, 0x1d };
87 static const u8 VIA686A_REG_TEMP_HYST[] = { 0x3a, 0x3e, 0x1e };
88 /* bits 7-6 */
89 #define VIA686A_REG_TEMP_LOW1 0x4b
90 /* 2 = bits 5-4, 3 = bits 7-6 */
91 #define VIA686A_REG_TEMP_LOW23 0x49
92
93 #define VIA686A_REG_ALARM1 0x41
94 #define VIA686A_REG_ALARM2 0x42
95 #define VIA686A_REG_FANDIV 0x47
96 #define VIA686A_REG_CONFIG 0x40
97 /*
98 * The following register sets temp interrupt mode (bits 1-0 for temp1,
99 * 3-2 for temp2, 5-4 for temp3). Modes are:
100 * 00 interrupt stays as long as value is out-of-range
101 * 01 interrupt is cleared once register is read (default)
102 * 10 comparator mode- like 00, but ignores hysteresis
103 * 11 same as 00
104 */
105 #define VIA686A_REG_TEMP_MODE 0x4b
106 /* We'll just assume that you want to set all 3 simultaneously: */
107 #define VIA686A_TEMP_MODE_MASK 0x3F
108 #define VIA686A_TEMP_MODE_CONTINUOUS 0x00
109
110 /*
111 * Conversions. Limit checking is only done on the TO_REG
112 * variants.
113 *
114 ******** VOLTAGE CONVERSIONS (Bob Dougherty) ********
115 * From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
116 * voltagefactor[0]=1.25/2628; (2628/1.25=2102.4) // Vccp
117 * voltagefactor[1]=1.25/2628; (2628/1.25=2102.4) // +2.5V
118 * voltagefactor[2]=1.67/2628; (2628/1.67=1573.7) // +3.3V
119 * voltagefactor[3]=2.6/2628; (2628/2.60=1010.8) // +5V
120 * voltagefactor[4]=6.3/2628; (2628/6.30=417.14) // +12V
121 * in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
122 * That is:
123 * volts = (25*regVal+133)*factor
124 * regVal = (volts/factor-133)/25
125 * (These conversions were contributed by Jonathan Teh Soon Yew
126 * <j.teh@iname.com>)
127 */
IN_TO_REG(long val,int in_num)128 static inline u8 IN_TO_REG(long val, int in_num)
129 {
130 /*
131 * To avoid floating point, we multiply constants by 10 (100 for +12V).
132 * Rounding is done (120500 is actually 133000 - 12500).
133 * Remember that val is expressed in 0.001V/bit, which is why we divide
134 * by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
135 * for the constants.
136 */
137 if (in_num <= 1)
138 return (u8) clamp_val((val * 21024 - 1205000) / 250000, 0, 255);
139 else if (in_num == 2)
140 return (u8) clamp_val((val * 15737 - 1205000) / 250000, 0, 255);
141 else if (in_num == 3)
142 return (u8) clamp_val((val * 10108 - 1205000) / 250000, 0, 255);
143 else
144 return (u8) clamp_val((val * 41714 - 12050000) / 2500000, 0,
145 255);
146 }
147
IN_FROM_REG(u8 val,int in_num)148 static inline long IN_FROM_REG(u8 val, int in_num)
149 {
150 /*
151 * To avoid floating point, we multiply constants by 10 (100 for +12V).
152 * We also multiply them by 1000 because we want 0.001V/bit for the
153 * output value. Rounding is done.
154 */
155 if (in_num <= 1)
156 return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024);
157 else if (in_num == 2)
158 return (long) ((250000 * val + 1330000 + 15737 / 2) / 15737);
159 else if (in_num == 3)
160 return (long) ((250000 * val + 1330000 + 10108 / 2) / 10108);
161 else
162 return (long) ((2500000 * val + 13300000 + 41714 / 2) / 41714);
163 }
164
165 /********* FAN RPM CONVERSIONS ********/
166 /*
167 * Higher register values = slower fans (the fan's strobe gates a counter).
168 * But this chip saturates back at 0, not at 255 like all the other chips.
169 * So, 0 means 0 RPM
170 */
FAN_TO_REG(long rpm,int div)171 static inline u8 FAN_TO_REG(long rpm, int div)
172 {
173 if (rpm == 0)
174 return 0;
175 rpm = clamp_val(rpm, 1, 1000000);
176 return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
177 }
178
179 #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (val) == 255 ? 0 : 1350000 / \
180 ((val) * (div)))
181
182 /******** TEMP CONVERSIONS (Bob Dougherty) *********/
183 /*
184 * linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
185 * if(temp<169)
186 * return double(temp)*0.427-32.08;
187 * else if(temp>=169 && temp<=202)
188 * return double(temp)*0.582-58.16;
189 * else
190 * return double(temp)*0.924-127.33;
191 *
192 * A fifth-order polynomial fits the unofficial data (provided by Alex van
193 * Kaam <darkside@chello.nl>) a bit better. It also give more reasonable
194 * numbers on my machine (ie. they agree with what my BIOS tells me).
195 * Here's the fifth-order fit to the 8-bit data:
196 * temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
197 * 2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
198 *
199 * (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
200 * finding my typos in this formula!)
201 *
202 * Alas, none of the elegant function-fit solutions will work because we
203 * aren't allowed to use floating point in the kernel and doing it with
204 * integers doesn't provide enough precision. So we'll do boring old
205 * look-up table stuff. The unofficial data (see below) have effectively
206 * 7-bit resolution (they are rounded to the nearest degree). I'm assuming
207 * that the transfer function of the device is monotonic and smooth, so a
208 * smooth function fit to the data will allow us to get better precision.
209 * I used the 5th-order poly fit described above and solved for
210 * VIA register values 0-255. I *10 before rounding, so we get tenth-degree
211 * precision. (I could have done all 1024 values for our 10-bit readings,
212 * but the function is very linear in the useful range (0-80 deg C), so
213 * we'll just use linear interpolation for 10-bit readings.) So, temp_lut
214 * is the temp at via register values 0-255:
215 */
216 static const s16 temp_lut[] = {
217 -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
218 -503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
219 -362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
220 -255, -246, -237, -229, -220, -212, -204, -196, -188, -180,
221 -173, -166, -159, -152, -145, -139, -132, -126, -120, -114,
222 -108, -102, -96, -91, -85, -80, -74, -69, -64, -59, -54, -49,
223 -44, -39, -34, -29, -25, -20, -15, -11, -6, -2, 3, 7, 12, 16,
224 20, 25, 29, 33, 37, 42, 46, 50, 54, 59, 63, 67, 71, 75, 79, 84,
225 88, 92, 96, 100, 104, 109, 113, 117, 121, 125, 130, 134, 138,
226 142, 146, 151, 155, 159, 163, 168, 172, 176, 181, 185, 189,
227 193, 198, 202, 206, 211, 215, 219, 224, 228, 232, 237, 241,
228 245, 250, 254, 259, 263, 267, 272, 276, 281, 285, 290, 294,
229 299, 303, 307, 312, 316, 321, 325, 330, 334, 339, 344, 348,
230 353, 357, 362, 366, 371, 376, 380, 385, 390, 395, 399, 404,
231 409, 414, 419, 423, 428, 433, 438, 443, 449, 454, 459, 464,
232 469, 475, 480, 486, 491, 497, 502, 508, 514, 520, 526, 532,
233 538, 544, 551, 557, 564, 571, 578, 584, 592, 599, 606, 614,
234 621, 629, 637, 645, 654, 662, 671, 680, 689, 698, 708, 718,
235 728, 738, 749, 759, 770, 782, 793, 805, 818, 830, 843, 856,
236 870, 883, 898, 912, 927, 943, 958, 975, 991, 1008, 1026, 1044,
237 1062, 1081, 1101, 1121, 1141, 1162, 1184, 1206, 1229, 1252,
238 1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462
239 };
240
241 /*
242 * the original LUT values from Alex van Kaam <darkside@chello.nl>
243 * (for via register values 12-240):
244 * {-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
245 * -30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
246 * -15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
247 * -3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
248 * 12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
249 * 22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
250 * 33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
251 * 45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
252 * 61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
253 * 85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
254 *
255 *
256 * Here's the reverse LUT. I got it by doing a 6-th order poly fit (needed
257 * an extra term for a good fit to these inverse data!) and then
258 * solving for each temp value from -50 to 110 (the useable range for
259 * this chip). Here's the fit:
260 * viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
261 * - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
262 * Note that n=161:
263 */
264 static const u8 via_lut[] = {
265 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
266 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40,
267 41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66,
268 69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100,
269 103, 105, 107, 110, 112, 115, 117, 119, 122, 124, 126, 129,
270 131, 134, 136, 138, 140, 143, 145, 147, 150, 152, 154, 156,
271 158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180,
272 182, 183, 185, 187, 188, 190, 192, 193, 195, 196, 198, 199,
273 200, 202, 203, 205, 206, 207, 208, 209, 210, 211, 212, 213,
274 214, 215, 216, 217, 218, 219, 220, 221, 222, 222, 223, 224,
275 225, 226, 226, 227, 228, 228, 229, 230, 230, 231, 232, 232,
276 233, 233, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
277 239, 240
278 };
279
280 /*
281 * Converting temps to (8-bit) hyst and over registers
282 * No interpolation here.
283 * The +50 is because the temps start at -50
284 */
TEMP_TO_REG(long val)285 static inline u8 TEMP_TO_REG(long val)
286 {
287 return via_lut[val <= -50000 ? 0 : val >= 110000 ? 160 :
288 (val < 0 ? val - 500 : val + 500) / 1000 + 50];
289 }
290
291 /* for 8-bit temperature hyst and over registers */
292 #define TEMP_FROM_REG(val) ((long)temp_lut[val] * 100)
293
294 /* for 10-bit temperature readings */
TEMP_FROM_REG10(u16 val)295 static inline long TEMP_FROM_REG10(u16 val)
296 {
297 u16 eight_bits = val >> 2;
298 u16 two_bits = val & 3;
299
300 /* no interpolation for these */
301 if (two_bits == 0 || eight_bits == 255)
302 return TEMP_FROM_REG(eight_bits);
303
304 /* do some linear interpolation */
305 return (temp_lut[eight_bits] * (4 - two_bits) +
306 temp_lut[eight_bits + 1] * two_bits) * 25;
307 }
308
309 #define DIV_FROM_REG(val) (1 << (val))
310 #define DIV_TO_REG(val) ((val) == 8 ? 3 : (val) == 4 ? 2 : (val) == 1 ? 0 : 1)
311
312 /*
313 * For each registered chip, we need to keep some data in memory.
314 * The structure is dynamically allocated.
315 */
316 struct via686a_data {
317 unsigned short addr;
318 const char *name;
319 struct device *hwmon_dev;
320 struct mutex update_lock;
321 char valid; /* !=0 if following fields are valid */
322 unsigned long last_updated; /* In jiffies */
323
324 u8 in[5]; /* Register value */
325 u8 in_max[5]; /* Register value */
326 u8 in_min[5]; /* Register value */
327 u8 fan[2]; /* Register value */
328 u8 fan_min[2]; /* Register value */
329 u16 temp[3]; /* Register value 10 bit */
330 u8 temp_over[3]; /* Register value */
331 u8 temp_hyst[3]; /* Register value */
332 u8 fan_div[2]; /* Register encoding, shifted right */
333 u16 alarms; /* Register encoding, combined */
334 };
335
336 static struct pci_dev *s_bridge; /* pointer to the (only) via686a */
337
338 static int via686a_probe(struct platform_device *pdev);
339 static int via686a_remove(struct platform_device *pdev);
340
via686a_read_value(struct via686a_data * data,u8 reg)341 static inline int via686a_read_value(struct via686a_data *data, u8 reg)
342 {
343 return inb_p(data->addr + reg);
344 }
345
via686a_write_value(struct via686a_data * data,u8 reg,u8 value)346 static inline void via686a_write_value(struct via686a_data *data, u8 reg,
347 u8 value)
348 {
349 outb_p(value, data->addr + reg);
350 }
351
352 static struct via686a_data *via686a_update_device(struct device *dev);
353 static void via686a_init_device(struct via686a_data *data);
354
355 /* following are the sysfs callback functions */
356
357 /* 7 voltage sensors */
show_in(struct device * dev,struct device_attribute * da,char * buf)358 static ssize_t show_in(struct device *dev, struct device_attribute *da,
359 char *buf) {
360 struct via686a_data *data = via686a_update_device(dev);
361 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
362 int nr = attr->index;
363 return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr));
364 }
365
show_in_min(struct device * dev,struct device_attribute * da,char * buf)366 static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
367 char *buf) {
368 struct via686a_data *data = via686a_update_device(dev);
369 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
370 int nr = attr->index;
371 return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr));
372 }
373
show_in_max(struct device * dev,struct device_attribute * da,char * buf)374 static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
375 char *buf) {
376 struct via686a_data *data = via686a_update_device(dev);
377 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
378 int nr = attr->index;
379 return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr));
380 }
381
set_in_min(struct device * dev,struct device_attribute * da,const char * buf,size_t count)382 static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
383 const char *buf, size_t count) {
384 struct via686a_data *data = dev_get_drvdata(dev);
385 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
386 int nr = attr->index;
387 unsigned long val;
388 int err;
389
390 err = kstrtoul(buf, 10, &val);
391 if (err)
392 return err;
393
394 mutex_lock(&data->update_lock);
395 data->in_min[nr] = IN_TO_REG(val, nr);
396 via686a_write_value(data, VIA686A_REG_IN_MIN(nr),
397 data->in_min[nr]);
398 mutex_unlock(&data->update_lock);
399 return count;
400 }
set_in_max(struct device * dev,struct device_attribute * da,const char * buf,size_t count)401 static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
402 const char *buf, size_t count) {
403 struct via686a_data *data = dev_get_drvdata(dev);
404 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
405 int nr = attr->index;
406 unsigned long val;
407 int err;
408
409 err = kstrtoul(buf, 10, &val);
410 if (err)
411 return err;
412
413 mutex_lock(&data->update_lock);
414 data->in_max[nr] = IN_TO_REG(val, nr);
415 via686a_write_value(data, VIA686A_REG_IN_MAX(nr),
416 data->in_max[nr]);
417 mutex_unlock(&data->update_lock);
418 return count;
419 }
420 #define show_in_offset(offset) \
421 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
422 show_in, NULL, offset); \
423 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
424 show_in_min, set_in_min, offset); \
425 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
426 show_in_max, set_in_max, offset);
427
428 show_in_offset(0);
429 show_in_offset(1);
430 show_in_offset(2);
431 show_in_offset(3);
432 show_in_offset(4);
433
434 /* 3 temperatures */
show_temp(struct device * dev,struct device_attribute * da,char * buf)435 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
436 char *buf) {
437 struct via686a_data *data = via686a_update_device(dev);
438 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
439 int nr = attr->index;
440 return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr]));
441 }
show_temp_over(struct device * dev,struct device_attribute * da,char * buf)442 static ssize_t show_temp_over(struct device *dev, struct device_attribute *da,
443 char *buf) {
444 struct via686a_data *data = via686a_update_device(dev);
445 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
446 int nr = attr->index;
447 return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr]));
448 }
show_temp_hyst(struct device * dev,struct device_attribute * da,char * buf)449 static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *da,
450 char *buf) {
451 struct via686a_data *data = via686a_update_device(dev);
452 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
453 int nr = attr->index;
454 return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr]));
455 }
set_temp_over(struct device * dev,struct device_attribute * da,const char * buf,size_t count)456 static ssize_t set_temp_over(struct device *dev, struct device_attribute *da,
457 const char *buf, size_t count) {
458 struct via686a_data *data = dev_get_drvdata(dev);
459 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
460 int nr = attr->index;
461 long val;
462 int err;
463
464 err = kstrtol(buf, 10, &val);
465 if (err)
466 return err;
467
468 mutex_lock(&data->update_lock);
469 data->temp_over[nr] = TEMP_TO_REG(val);
470 via686a_write_value(data, VIA686A_REG_TEMP_OVER[nr],
471 data->temp_over[nr]);
472 mutex_unlock(&data->update_lock);
473 return count;
474 }
set_temp_hyst(struct device * dev,struct device_attribute * da,const char * buf,size_t count)475 static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da,
476 const char *buf, size_t count) {
477 struct via686a_data *data = dev_get_drvdata(dev);
478 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
479 int nr = attr->index;
480 long val;
481 int err;
482
483 err = kstrtol(buf, 10, &val);
484 if (err)
485 return err;
486
487 mutex_lock(&data->update_lock);
488 data->temp_hyst[nr] = TEMP_TO_REG(val);
489 via686a_write_value(data, VIA686A_REG_TEMP_HYST[nr],
490 data->temp_hyst[nr]);
491 mutex_unlock(&data->update_lock);
492 return count;
493 }
494 #define show_temp_offset(offset) \
495 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
496 show_temp, NULL, offset - 1); \
497 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
498 show_temp_over, set_temp_over, offset - 1); \
499 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
500 show_temp_hyst, set_temp_hyst, offset - 1);
501
502 show_temp_offset(1);
503 show_temp_offset(2);
504 show_temp_offset(3);
505
506 /* 2 Fans */
show_fan(struct device * dev,struct device_attribute * da,char * buf)507 static ssize_t show_fan(struct device *dev, struct device_attribute *da,
508 char *buf) {
509 struct via686a_data *data = via686a_update_device(dev);
510 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
511 int nr = attr->index;
512 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
513 DIV_FROM_REG(data->fan_div[nr])));
514 }
show_fan_min(struct device * dev,struct device_attribute * da,char * buf)515 static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
516 char *buf) {
517 struct via686a_data *data = via686a_update_device(dev);
518 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
519 int nr = attr->index;
520 return sprintf(buf, "%d\n",
521 FAN_FROM_REG(data->fan_min[nr],
522 DIV_FROM_REG(data->fan_div[nr])));
523 }
show_fan_div(struct device * dev,struct device_attribute * da,char * buf)524 static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
525 char *buf) {
526 struct via686a_data *data = via686a_update_device(dev);
527 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
528 int nr = attr->index;
529 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
530 }
set_fan_min(struct device * dev,struct device_attribute * da,const char * buf,size_t count)531 static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
532 const char *buf, size_t count) {
533 struct via686a_data *data = dev_get_drvdata(dev);
534 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
535 int nr = attr->index;
536 unsigned long val;
537 int err;
538
539 err = kstrtoul(buf, 10, &val);
540 if (err)
541 return err;
542
543 mutex_lock(&data->update_lock);
544 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
545 via686a_write_value(data, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
546 mutex_unlock(&data->update_lock);
547 return count;
548 }
set_fan_div(struct device * dev,struct device_attribute * da,const char * buf,size_t count)549 static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
550 const char *buf, size_t count) {
551 struct via686a_data *data = dev_get_drvdata(dev);
552 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
553 int nr = attr->index;
554 int old;
555 unsigned long val;
556 int err;
557
558 err = kstrtoul(buf, 10, &val);
559 if (err)
560 return err;
561
562 mutex_lock(&data->update_lock);
563 old = via686a_read_value(data, VIA686A_REG_FANDIV);
564 data->fan_div[nr] = DIV_TO_REG(val);
565 old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
566 via686a_write_value(data, VIA686A_REG_FANDIV, old);
567 mutex_unlock(&data->update_lock);
568 return count;
569 }
570
571 #define show_fan_offset(offset) \
572 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
573 show_fan, NULL, offset - 1); \
574 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
575 show_fan_min, set_fan_min, offset - 1); \
576 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
577 show_fan_div, set_fan_div, offset - 1);
578
579 show_fan_offset(1);
580 show_fan_offset(2);
581
582 /* Alarms */
alarms_show(struct device * dev,struct device_attribute * attr,char * buf)583 static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
584 char *buf)
585 {
586 struct via686a_data *data = via686a_update_device(dev);
587 return sprintf(buf, "%u\n", data->alarms);
588 }
589
590 static DEVICE_ATTR_RO(alarms);
591
show_alarm(struct device * dev,struct device_attribute * attr,char * buf)592 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
593 char *buf)
594 {
595 int bitnr = to_sensor_dev_attr(attr)->index;
596 struct via686a_data *data = via686a_update_device(dev);
597 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
598 }
599 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
600 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
601 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
602 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
603 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
604 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
605 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11);
606 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 15);
607 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
608 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
609
name_show(struct device * dev,struct device_attribute * devattr,char * buf)610 static ssize_t name_show(struct device *dev, struct device_attribute
611 *devattr, char *buf)
612 {
613 struct via686a_data *data = dev_get_drvdata(dev);
614 return sprintf(buf, "%s\n", data->name);
615 }
616 static DEVICE_ATTR_RO(name);
617
618 static struct attribute *via686a_attributes[] = {
619 &sensor_dev_attr_in0_input.dev_attr.attr,
620 &sensor_dev_attr_in1_input.dev_attr.attr,
621 &sensor_dev_attr_in2_input.dev_attr.attr,
622 &sensor_dev_attr_in3_input.dev_attr.attr,
623 &sensor_dev_attr_in4_input.dev_attr.attr,
624 &sensor_dev_attr_in0_min.dev_attr.attr,
625 &sensor_dev_attr_in1_min.dev_attr.attr,
626 &sensor_dev_attr_in2_min.dev_attr.attr,
627 &sensor_dev_attr_in3_min.dev_attr.attr,
628 &sensor_dev_attr_in4_min.dev_attr.attr,
629 &sensor_dev_attr_in0_max.dev_attr.attr,
630 &sensor_dev_attr_in1_max.dev_attr.attr,
631 &sensor_dev_attr_in2_max.dev_attr.attr,
632 &sensor_dev_attr_in3_max.dev_attr.attr,
633 &sensor_dev_attr_in4_max.dev_attr.attr,
634 &sensor_dev_attr_in0_alarm.dev_attr.attr,
635 &sensor_dev_attr_in1_alarm.dev_attr.attr,
636 &sensor_dev_attr_in2_alarm.dev_attr.attr,
637 &sensor_dev_attr_in3_alarm.dev_attr.attr,
638 &sensor_dev_attr_in4_alarm.dev_attr.attr,
639
640 &sensor_dev_attr_temp1_input.dev_attr.attr,
641 &sensor_dev_attr_temp2_input.dev_attr.attr,
642 &sensor_dev_attr_temp3_input.dev_attr.attr,
643 &sensor_dev_attr_temp1_max.dev_attr.attr,
644 &sensor_dev_attr_temp2_max.dev_attr.attr,
645 &sensor_dev_attr_temp3_max.dev_attr.attr,
646 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
647 &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
648 &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
649 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
650 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
651 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
652
653 &sensor_dev_attr_fan1_input.dev_attr.attr,
654 &sensor_dev_attr_fan2_input.dev_attr.attr,
655 &sensor_dev_attr_fan1_min.dev_attr.attr,
656 &sensor_dev_attr_fan2_min.dev_attr.attr,
657 &sensor_dev_attr_fan1_div.dev_attr.attr,
658 &sensor_dev_attr_fan2_div.dev_attr.attr,
659 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
660 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
661
662 &dev_attr_alarms.attr,
663 &dev_attr_name.attr,
664 NULL
665 };
666
667 static const struct attribute_group via686a_group = {
668 .attrs = via686a_attributes,
669 };
670
671 static struct platform_driver via686a_driver = {
672 .driver = {
673 .name = "via686a",
674 },
675 .probe = via686a_probe,
676 .remove = via686a_remove,
677 };
678
679
680 /* This is called when the module is loaded */
via686a_probe(struct platform_device * pdev)681 static int via686a_probe(struct platform_device *pdev)
682 {
683 struct via686a_data *data;
684 struct resource *res;
685 int err;
686
687 /* Reserve the ISA region */
688 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
689 if (!devm_request_region(&pdev->dev, res->start, VIA686A_EXTENT,
690 via686a_driver.driver.name)) {
691 dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
692 (unsigned long)res->start, (unsigned long)res->end);
693 return -ENODEV;
694 }
695
696 data = devm_kzalloc(&pdev->dev, sizeof(struct via686a_data),
697 GFP_KERNEL);
698 if (!data)
699 return -ENOMEM;
700
701 platform_set_drvdata(pdev, data);
702 data->addr = res->start;
703 data->name = "via686a";
704 mutex_init(&data->update_lock);
705
706 /* Initialize the VIA686A chip */
707 via686a_init_device(data);
708
709 /* Register sysfs hooks */
710 err = sysfs_create_group(&pdev->dev.kobj, &via686a_group);
711 if (err)
712 return err;
713
714 data->hwmon_dev = hwmon_device_register(&pdev->dev);
715 if (IS_ERR(data->hwmon_dev)) {
716 err = PTR_ERR(data->hwmon_dev);
717 goto exit_remove_files;
718 }
719
720 return 0;
721
722 exit_remove_files:
723 sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
724 return err;
725 }
726
via686a_remove(struct platform_device * pdev)727 static int via686a_remove(struct platform_device *pdev)
728 {
729 struct via686a_data *data = platform_get_drvdata(pdev);
730
731 hwmon_device_unregister(data->hwmon_dev);
732 sysfs_remove_group(&pdev->dev.kobj, &via686a_group);
733
734 return 0;
735 }
736
via686a_update_fan_div(struct via686a_data * data)737 static void via686a_update_fan_div(struct via686a_data *data)
738 {
739 int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
740 data->fan_div[0] = (reg >> 4) & 0x03;
741 data->fan_div[1] = reg >> 6;
742 }
743
via686a_init_device(struct via686a_data * data)744 static void via686a_init_device(struct via686a_data *data)
745 {
746 u8 reg;
747
748 /* Start monitoring */
749 reg = via686a_read_value(data, VIA686A_REG_CONFIG);
750 via686a_write_value(data, VIA686A_REG_CONFIG, (reg | 0x01) & 0x7F);
751
752 /* Configure temp interrupt mode for continuous-interrupt operation */
753 reg = via686a_read_value(data, VIA686A_REG_TEMP_MODE);
754 via686a_write_value(data, VIA686A_REG_TEMP_MODE,
755 (reg & ~VIA686A_TEMP_MODE_MASK)
756 | VIA686A_TEMP_MODE_CONTINUOUS);
757
758 /* Pre-read fan clock divisor values */
759 via686a_update_fan_div(data);
760 }
761
via686a_update_device(struct device * dev)762 static struct via686a_data *via686a_update_device(struct device *dev)
763 {
764 struct via686a_data *data = dev_get_drvdata(dev);
765 int i;
766
767 mutex_lock(&data->update_lock);
768
769 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
770 || !data->valid) {
771 for (i = 0; i <= 4; i++) {
772 data->in[i] =
773 via686a_read_value(data, VIA686A_REG_IN(i));
774 data->in_min[i] = via686a_read_value(data,
775 VIA686A_REG_IN_MIN
776 (i));
777 data->in_max[i] =
778 via686a_read_value(data, VIA686A_REG_IN_MAX(i));
779 }
780 for (i = 1; i <= 2; i++) {
781 data->fan[i - 1] =
782 via686a_read_value(data, VIA686A_REG_FAN(i));
783 data->fan_min[i - 1] = via686a_read_value(data,
784 VIA686A_REG_FAN_MIN(i));
785 }
786 for (i = 0; i <= 2; i++) {
787 data->temp[i] = via686a_read_value(data,
788 VIA686A_REG_TEMP[i]) << 2;
789 data->temp_over[i] =
790 via686a_read_value(data,
791 VIA686A_REG_TEMP_OVER[i]);
792 data->temp_hyst[i] =
793 via686a_read_value(data,
794 VIA686A_REG_TEMP_HYST[i]);
795 }
796 /*
797 * add in lower 2 bits
798 * temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
799 * temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
800 * temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
801 */
802 data->temp[0] |= (via686a_read_value(data,
803 VIA686A_REG_TEMP_LOW1)
804 & 0xc0) >> 6;
805 data->temp[1] |=
806 (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
807 0x30) >> 4;
808 data->temp[2] |=
809 (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
810 0xc0) >> 6;
811
812 via686a_update_fan_div(data);
813 data->alarms =
814 via686a_read_value(data,
815 VIA686A_REG_ALARM1) |
816 (via686a_read_value(data, VIA686A_REG_ALARM2) << 8);
817 data->last_updated = jiffies;
818 data->valid = 1;
819 }
820
821 mutex_unlock(&data->update_lock);
822
823 return data;
824 }
825
826 static const struct pci_device_id via686a_pci_ids[] = {
827 { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
828 { }
829 };
830 MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
831
via686a_device_add(unsigned short address)832 static int via686a_device_add(unsigned short address)
833 {
834 struct resource res = {
835 .start = address,
836 .end = address + VIA686A_EXTENT - 1,
837 .name = "via686a",
838 .flags = IORESOURCE_IO,
839 };
840 int err;
841
842 err = acpi_check_resource_conflict(&res);
843 if (err)
844 goto exit;
845
846 pdev = platform_device_alloc("via686a", address);
847 if (!pdev) {
848 err = -ENOMEM;
849 pr_err("Device allocation failed\n");
850 goto exit;
851 }
852
853 err = platform_device_add_resources(pdev, &res, 1);
854 if (err) {
855 pr_err("Device resource addition failed (%d)\n", err);
856 goto exit_device_put;
857 }
858
859 err = platform_device_add(pdev);
860 if (err) {
861 pr_err("Device addition failed (%d)\n", err);
862 goto exit_device_put;
863 }
864
865 return 0;
866
867 exit_device_put:
868 platform_device_put(pdev);
869 exit:
870 return err;
871 }
872
via686a_pci_probe(struct pci_dev * dev,const struct pci_device_id * id)873 static int via686a_pci_probe(struct pci_dev *dev,
874 const struct pci_device_id *id)
875 {
876 u16 address, val;
877
878 if (force_addr) {
879 address = force_addr & ~(VIA686A_EXTENT - 1);
880 dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address);
881 if (PCIBIOS_SUCCESSFUL !=
882 pci_write_config_word(dev, VIA686A_BASE_REG, address | 1))
883 return -ENODEV;
884 }
885 if (PCIBIOS_SUCCESSFUL !=
886 pci_read_config_word(dev, VIA686A_BASE_REG, &val))
887 return -ENODEV;
888
889 address = val & ~(VIA686A_EXTENT - 1);
890 if (address == 0) {
891 dev_err(&dev->dev,
892 "base address not set - upgrade BIOS or use force_addr=0xaddr\n");
893 return -ENODEV;
894 }
895
896 if (PCIBIOS_SUCCESSFUL !=
897 pci_read_config_word(dev, VIA686A_ENABLE_REG, &val))
898 return -ENODEV;
899 if (!(val & 0x0001)) {
900 if (!force_addr) {
901 dev_warn(&dev->dev,
902 "Sensors disabled, enable with force_addr=0x%x\n",
903 address);
904 return -ENODEV;
905 }
906
907 dev_warn(&dev->dev, "Enabling sensors\n");
908 if (PCIBIOS_SUCCESSFUL !=
909 pci_write_config_word(dev, VIA686A_ENABLE_REG,
910 val | 0x0001))
911 return -ENODEV;
912 }
913
914 if (platform_driver_register(&via686a_driver))
915 goto exit;
916
917 /* Sets global pdev as a side effect */
918 if (via686a_device_add(address))
919 goto exit_unregister;
920
921 /*
922 * Always return failure here. This is to allow other drivers to bind
923 * to this pci device. We don't really want to have control over the
924 * pci device, we only wanted to read as few register values from it.
925 */
926 s_bridge = pci_dev_get(dev);
927 return -ENODEV;
928
929 exit_unregister:
930 platform_driver_unregister(&via686a_driver);
931 exit:
932 return -ENODEV;
933 }
934
935 static struct pci_driver via686a_pci_driver = {
936 .name = "via686a",
937 .id_table = via686a_pci_ids,
938 .probe = via686a_pci_probe,
939 };
940
sm_via686a_init(void)941 static int __init sm_via686a_init(void)
942 {
943 return pci_register_driver(&via686a_pci_driver);
944 }
945
sm_via686a_exit(void)946 static void __exit sm_via686a_exit(void)
947 {
948 pci_unregister_driver(&via686a_pci_driver);
949 if (s_bridge != NULL) {
950 platform_device_unregister(pdev);
951 platform_driver_unregister(&via686a_driver);
952 pci_dev_put(s_bridge);
953 s_bridge = NULL;
954 }
955 }
956
957 MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, "
958 "Mark Studebaker <mdsxyz123@yahoo.com> "
959 "and Bob Dougherty <bobd@stanford.edu>");
960 MODULE_DESCRIPTION("VIA 686A Sensor device");
961 MODULE_LICENSE("GPL");
962
963 module_init(sm_via686a_init);
964 module_exit(sm_via686a_exit);
965
