1 /*
2  * pata_ns87410.c 	- National Semiconductor 87410 PATA for new ATA layer
3  *			  (C) 2006 Red Hat Inc
4  *
5  *  This program is free software; you can redistribute it and/or modify
6  *  it under the terms of the GNU General Public License as published by
7  *  the Free Software Foundation; either version 2, or (at your option)
8  *  any later version.
9  *
10  *  This program is distributed in the hope that it will be useful,
11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  *  GNU General Public License for more details.
14  *
15  *  You should have received a copy of the GNU General Public License
16  *  along with this program; see the file COPYING.  If not, write to
17  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
18  */
19 
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/blkdev.h>
24 #include <linux/delay.h>
25 #include <scsi/scsi_host.h>
26 #include <linux/libata.h>
27 
28 #define DRV_NAME "pata_ns87410"
29 #define DRV_VERSION "0.4.6"
30 
31 /**
32  *	ns87410_pre_reset		-	probe begin
33  *	@link: ATA link
34  *	@deadline: deadline jiffies for the operation
35  *
36  *	Check enabled ports
37  */
38 
ns87410_pre_reset(struct ata_link * link,unsigned long deadline)39 static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)
40 {
41 	struct ata_port *ap = link->ap;
42 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
43 	static const struct pci_bits ns87410_enable_bits[] = {
44 		{ 0x43, 1, 0x08, 0x08 },
45 		{ 0x47, 1, 0x08, 0x08 }
46 	};
47 
48 	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
49 		return -ENOENT;
50 
51 	return ata_sff_prereset(link, deadline);
52 }
53 
54 /**
55  *	ns87410_set_piomode	-	set initial PIO mode data
56  *	@ap: ATA interface
57  *	@adev: ATA device
58  *
59  *	Program timing data. This is kept per channel not per device,
60  *	and only affects the data port.
61  */
62 
ns87410_set_piomode(struct ata_port * ap,struct ata_device * adev)63 static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
64 {
65 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
66 	int port = 0x40 + 4 * ap->port_no;
67 	u8 idetcr, idefr;
68 	struct ata_timing at;
69 
70 	static const u8 activebits[15] = {
71 		0, 1, 2, 3, 4,
72 		5, 5, 6, 6, 6,
73 		6, 7, 7, 7, 7
74 	};
75 
76 	static const u8 recoverbits[12] = {
77 		0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7
78 	};
79 
80 	pci_read_config_byte(pdev, port + 3, &idefr);
81 
82 	if (ata_pio_need_iordy(adev))
83 		idefr |= 0x04;	/* IORDY enable */
84 	else
85 		idefr &= ~0x04;
86 
87 	if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {
88 		dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode);
89 		return;
90 	}
91 
92 	at.active = clamp_val(at.active, 2, 16) - 2;
93 	at.setup = clamp_val(at.setup, 1, 4) - 1;
94 	at.recover = clamp_val(at.recover, 1, 12) - 1;
95 
96 	idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];
97 
98 	pci_write_config_byte(pdev, port, idetcr);
99 	pci_write_config_byte(pdev, port + 3, idefr);
100 	/* We use ap->private_data as a pointer to the device currently
101 	   loaded for timing */
102 	ap->private_data = adev;
103 }
104 
105 /**
106  *	ns87410_qc_issue	-	command issue
107  *	@qc: command pending
108  *
109  *	Called when the libata layer is about to issue a command. We wrap
110  *	this interface so that we can load the correct ATA timings if
111  *	necessary.
112  */
113 
ns87410_qc_issue(struct ata_queued_cmd * qc)114 static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)
115 {
116 	struct ata_port *ap = qc->ap;
117 	struct ata_device *adev = qc->dev;
118 
119 	/* If modes have been configured and the channel data is not loaded
120 	   then load it. We have to check if pio_mode is set as the core code
121 	   does not set adev->pio_mode to XFER_PIO_0 while probing as would be
122 	   logical */
123 
124 	if (adev->pio_mode && adev != ap->private_data)
125 		ns87410_set_piomode(ap, adev);
126 
127 	return ata_sff_qc_issue(qc);
128 }
129 
130 static struct scsi_host_template ns87410_sht = {
131 	ATA_PIO_SHT(DRV_NAME),
132 };
133 
134 static struct ata_port_operations ns87410_port_ops = {
135 	.inherits	= &ata_sff_port_ops,
136 	.qc_issue	= ns87410_qc_issue,
137 	.cable_detect	= ata_cable_40wire,
138 	.set_piomode	= ns87410_set_piomode,
139 	.prereset	= ns87410_pre_reset,
140 };
141 
ns87410_init_one(struct pci_dev * dev,const struct pci_device_id * id)142 static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
143 {
144 	static const struct ata_port_info info = {
145 		.flags = ATA_FLAG_SLAVE_POSS,
146 		.pio_mask = ATA_PIO3,
147 		.port_ops = &ns87410_port_ops
148 	};
149 	const struct ata_port_info *ppi[] = { &info, NULL };
150 	return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0);
151 }
152 
153 static const struct pci_device_id ns87410[] = {
154 	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), },
155 
156 	{ },
157 };
158 
159 static struct pci_driver ns87410_pci_driver = {
160 	.name 		= DRV_NAME,
161 	.id_table	= ns87410,
162 	.probe 		= ns87410_init_one,
163 	.remove		= ata_pci_remove_one,
164 #ifdef CONFIG_PM_SLEEP
165 	.suspend	= ata_pci_device_suspend,
166 	.resume		= ata_pci_device_resume,
167 #endif
168 };
169 
170 module_pci_driver(ns87410_pci_driver);
171 
172 MODULE_AUTHOR("Alan Cox");
173 MODULE_DESCRIPTION("low-level driver for Nat Semi 87410");
174 MODULE_LICENSE("GPL");
175 MODULE_DEVICE_TABLE(pci, ns87410);
176 MODULE_VERSION(DRV_VERSION);
177