1 // SPDX-License-Identifier: GPL-2.0
2 /* Various workarounds for chipset bugs.
3    This code runs very early and can't use the regular PCI subsystem
4    The entries are keyed to PCI bridges which usually identify chipsets
5    uniquely.
6    This is only for whole classes of chipsets with specific problems which
7    need early invasive action (e.g. before the timers are initialized).
8    Most PCI device specific workarounds can be done later and should be
9    in standard PCI quirks
10    Mainboard specific bugs should be handled by DMI entries.
11    CPU specific bugs in setup.c */
12 
13 #include <linux/pci.h>
14 #include <linux/acpi.h>
15 #include <linux/delay.h>
16 #include <linux/pci_ids.h>
17 #include <linux/bcma/bcma.h>
18 #include <linux/bcma/bcma_regs.h>
19 #include <linux/platform_data/x86/apple.h>
20 #include <drm/i915_drm.h>
21 #include <asm/pci-direct.h>
22 #include <asm/dma.h>
23 #include <asm/io_apic.h>
24 #include <asm/apic.h>
25 #include <asm/hpet.h>
26 #include <asm/iommu.h>
27 #include <asm/gart.h>
28 #include <asm/irq_remapping.h>
29 #include <asm/early_ioremap.h>
30 
fix_hypertransport_config(int num,int slot,int func)31 static void __init fix_hypertransport_config(int num, int slot, int func)
32 {
33 	u32 htcfg;
34 	/*
35 	 * we found a hypertransport bus
36 	 * make sure that we are broadcasting
37 	 * interrupts to all cpus on the ht bus
38 	 * if we're using extended apic ids
39 	 */
40 	htcfg = read_pci_config(num, slot, func, 0x68);
41 	if (htcfg & (1 << 18)) {
42 		printk(KERN_INFO "Detected use of extended apic ids "
43 				 "on hypertransport bus\n");
44 		if ((htcfg & (1 << 17)) == 0) {
45 			printk(KERN_INFO "Enabling hypertransport extended "
46 					 "apic interrupt broadcast\n");
47 			printk(KERN_INFO "Note this is a bios bug, "
48 					 "please contact your hw vendor\n");
49 			htcfg |= (1 << 17);
50 			write_pci_config(num, slot, func, 0x68, htcfg);
51 		}
52 	}
53 
54 
55 }
56 
via_bugs(int num,int slot,int func)57 static void __init via_bugs(int  num, int slot, int func)
58 {
59 #ifdef CONFIG_GART_IOMMU
60 	if ((max_pfn > MAX_DMA32_PFN ||  force_iommu) &&
61 	    !gart_iommu_aperture_allowed) {
62 		printk(KERN_INFO
63 		       "Looks like a VIA chipset. Disabling IOMMU."
64 		       " Override with iommu=allowed\n");
65 		gart_iommu_aperture_disabled = 1;
66 	}
67 #endif
68 }
69 
70 #ifdef CONFIG_ACPI
71 #ifdef CONFIG_X86_IO_APIC
72 
nvidia_hpet_check(struct acpi_table_header * header)73 static int __init nvidia_hpet_check(struct acpi_table_header *header)
74 {
75 	return 0;
76 }
77 #endif /* CONFIG_X86_IO_APIC */
78 #endif /* CONFIG_ACPI */
79 
nvidia_bugs(int num,int slot,int func)80 static void __init nvidia_bugs(int num, int slot, int func)
81 {
82 #ifdef CONFIG_ACPI
83 #ifdef CONFIG_X86_IO_APIC
84 	/*
85 	 * Only applies to Nvidia root ports (bus 0) and not to
86 	 * Nvidia graphics cards with PCI ports on secondary buses.
87 	 */
88 	if (num)
89 		return;
90 
91 	/*
92 	 * All timer overrides on Nvidia are
93 	 * wrong unless HPET is enabled.
94 	 * Unfortunately that's not true on many Asus boards.
95 	 * We don't know yet how to detect this automatically, but
96 	 * at least allow a command line override.
97 	 */
98 	if (acpi_use_timer_override)
99 		return;
100 
101 	if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
102 		acpi_skip_timer_override = 1;
103 		printk(KERN_INFO "Nvidia board "
104 		       "detected. Ignoring ACPI "
105 		       "timer override.\n");
106 		printk(KERN_INFO "If you got timer trouble "
107 			"try acpi_use_timer_override\n");
108 	}
109 #endif
110 #endif
111 	/* RED-PEN skip them on mptables too? */
112 
113 }
114 
115 #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
ati_ixp4x0_rev(int num,int slot,int func)116 static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
117 {
118 	u32 d;
119 	u8  b;
120 
121 	b = read_pci_config_byte(num, slot, func, 0xac);
122 	b &= ~(1<<5);
123 	write_pci_config_byte(num, slot, func, 0xac, b);
124 
125 	d = read_pci_config(num, slot, func, 0x70);
126 	d |= 1<<8;
127 	write_pci_config(num, slot, func, 0x70, d);
128 
129 	d = read_pci_config(num, slot, func, 0x8);
130 	d &= 0xff;
131 	return d;
132 }
133 
ati_bugs(int num,int slot,int func)134 static void __init ati_bugs(int num, int slot, int func)
135 {
136 	u32 d;
137 	u8  b;
138 
139 	if (acpi_use_timer_override)
140 		return;
141 
142 	d = ati_ixp4x0_rev(num, slot, func);
143 	if (d  < 0x82)
144 		acpi_skip_timer_override = 1;
145 	else {
146 		/* check for IRQ0 interrupt swap */
147 		outb(0x72, 0xcd6); b = inb(0xcd7);
148 		if (!(b & 0x2))
149 			acpi_skip_timer_override = 1;
150 	}
151 
152 	if (acpi_skip_timer_override) {
153 		printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
154 		printk(KERN_INFO "Ignoring ACPI timer override.\n");
155 		printk(KERN_INFO "If you got timer trouble "
156 		       "try acpi_use_timer_override\n");
157 	}
158 }
159 
ati_sbx00_rev(int num,int slot,int func)160 static u32 __init ati_sbx00_rev(int num, int slot, int func)
161 {
162 	u32 d;
163 
164 	d = read_pci_config(num, slot, func, 0x8);
165 	d &= 0xff;
166 
167 	return d;
168 }
169 
ati_bugs_contd(int num,int slot,int func)170 static void __init ati_bugs_contd(int num, int slot, int func)
171 {
172 	u32 d, rev;
173 
174 	rev = ati_sbx00_rev(num, slot, func);
175 	if (rev >= 0x40)
176 		acpi_fix_pin2_polarity = 1;
177 
178 	/*
179 	 * SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
180 	 * SB700: revisions 0x39, 0x3a, ...
181 	 * SB800: revisions 0x40, 0x41, ...
182 	 */
183 	if (rev >= 0x39)
184 		return;
185 
186 	if (acpi_use_timer_override)
187 		return;
188 
189 	/* check for IRQ0 interrupt swap */
190 	d = read_pci_config(num, slot, func, 0x64);
191 	if (!(d & (1<<14)))
192 		acpi_skip_timer_override = 1;
193 
194 	if (acpi_skip_timer_override) {
195 		printk(KERN_INFO "SB600 revision 0x%x\n", rev);
196 		printk(KERN_INFO "Ignoring ACPI timer override.\n");
197 		printk(KERN_INFO "If you got timer trouble "
198 		       "try acpi_use_timer_override\n");
199 	}
200 }
201 #else
ati_bugs(int num,int slot,int func)202 static void __init ati_bugs(int num, int slot, int func)
203 {
204 }
205 
ati_bugs_contd(int num,int slot,int func)206 static void __init ati_bugs_contd(int num, int slot, int func)
207 {
208 }
209 #endif
210 
intel_remapping_check(int num,int slot,int func)211 static void __init intel_remapping_check(int num, int slot, int func)
212 {
213 	u8 revision;
214 	u16 device;
215 
216 	device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
217 	revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
218 
219 	/*
220 	 * Revision <= 13 of all triggering devices id in this quirk
221 	 * have a problem draining interrupts when irq remapping is
222 	 * enabled, and should be flagged as broken. Additionally
223 	 * revision 0x22 of device id 0x3405 has this problem.
224 	 */
225 	if (revision <= 0x13)
226 		set_irq_remapping_broken();
227 	else if (device == 0x3405 && revision == 0x22)
228 		set_irq_remapping_broken();
229 }
230 
231 /*
232  * Systems with Intel graphics controllers set aside memory exclusively
233  * for gfx driver use.  This memory is not marked in the E820 as reserved
234  * or as RAM, and so is subject to overlap from E820 manipulation later
235  * in the boot process.  On some systems, MMIO space is allocated on top,
236  * despite the efforts of the "RAM buffer" approach, which simply rounds
237  * memory boundaries up to 64M to try to catch space that may decode
238  * as RAM and so is not suitable for MMIO.
239  */
240 
241 #define KB(x)	((x) * 1024UL)
242 #define MB(x)	(KB (KB (x)))
243 
i830_tseg_size(void)244 static resource_size_t __init i830_tseg_size(void)
245 {
246 	u8 esmramc = read_pci_config_byte(0, 0, 0, I830_ESMRAMC);
247 
248 	if (!(esmramc & TSEG_ENABLE))
249 		return 0;
250 
251 	if (esmramc & I830_TSEG_SIZE_1M)
252 		return MB(1);
253 	else
254 		return KB(512);
255 }
256 
i845_tseg_size(void)257 static resource_size_t __init i845_tseg_size(void)
258 {
259 	u8 esmramc = read_pci_config_byte(0, 0, 0, I845_ESMRAMC);
260 	u8 tseg_size = esmramc & I845_TSEG_SIZE_MASK;
261 
262 	if (!(esmramc & TSEG_ENABLE))
263 		return 0;
264 
265 	switch (tseg_size) {
266 	case I845_TSEG_SIZE_512K:	return KB(512);
267 	case I845_TSEG_SIZE_1M:		return MB(1);
268 	default:
269 		WARN(1, "Unknown ESMRAMC value: %x!\n", esmramc);
270 	}
271 	return 0;
272 }
273 
i85x_tseg_size(void)274 static resource_size_t __init i85x_tseg_size(void)
275 {
276 	u8 esmramc = read_pci_config_byte(0, 0, 0, I85X_ESMRAMC);
277 
278 	if (!(esmramc & TSEG_ENABLE))
279 		return 0;
280 
281 	return MB(1);
282 }
283 
i830_mem_size(void)284 static resource_size_t __init i830_mem_size(void)
285 {
286 	return read_pci_config_byte(0, 0, 0, I830_DRB3) * MB(32);
287 }
288 
i85x_mem_size(void)289 static resource_size_t __init i85x_mem_size(void)
290 {
291 	return read_pci_config_byte(0, 0, 1, I85X_DRB3) * MB(32);
292 }
293 
294 /*
295  * On 830/845/85x the stolen memory base isn't available in any
296  * register. We need to calculate it as TOM-TSEG_SIZE-stolen_size.
297  */
i830_stolen_base(int num,int slot,int func,resource_size_t stolen_size)298 static resource_size_t __init i830_stolen_base(int num, int slot, int func,
299 					       resource_size_t stolen_size)
300 {
301 	return i830_mem_size() - i830_tseg_size() - stolen_size;
302 }
303 
i845_stolen_base(int num,int slot,int func,resource_size_t stolen_size)304 static resource_size_t __init i845_stolen_base(int num, int slot, int func,
305 					       resource_size_t stolen_size)
306 {
307 	return i830_mem_size() - i845_tseg_size() - stolen_size;
308 }
309 
i85x_stolen_base(int num,int slot,int func,resource_size_t stolen_size)310 static resource_size_t __init i85x_stolen_base(int num, int slot, int func,
311 					       resource_size_t stolen_size)
312 {
313 	return i85x_mem_size() - i85x_tseg_size() - stolen_size;
314 }
315 
i865_stolen_base(int num,int slot,int func,resource_size_t stolen_size)316 static resource_size_t __init i865_stolen_base(int num, int slot, int func,
317 					       resource_size_t stolen_size)
318 {
319 	u16 toud = 0;
320 
321 	toud = read_pci_config_16(0, 0, 0, I865_TOUD);
322 
323 	return toud * KB(64) + i845_tseg_size();
324 }
325 
gen3_stolen_base(int num,int slot,int func,resource_size_t stolen_size)326 static resource_size_t __init gen3_stolen_base(int num, int slot, int func,
327 					       resource_size_t stolen_size)
328 {
329 	u32 bsm;
330 
331 	/* Almost universally we can find the Graphics Base of Stolen Memory
332 	 * at register BSM (0x5c) in the igfx configuration space. On a few
333 	 * (desktop) machines this is also mirrored in the bridge device at
334 	 * different locations, or in the MCHBAR.
335 	 */
336 	bsm = read_pci_config(num, slot, func, INTEL_BSM);
337 
338 	return bsm & INTEL_BSM_MASK;
339 }
340 
gen11_stolen_base(int num,int slot,int func,resource_size_t stolen_size)341 static resource_size_t __init gen11_stolen_base(int num, int slot, int func,
342 						resource_size_t stolen_size)
343 {
344 	u64 bsm;
345 
346 	bsm = read_pci_config(num, slot, func, INTEL_GEN11_BSM_DW0);
347 	bsm &= INTEL_BSM_MASK;
348 	bsm |= (u64)read_pci_config(num, slot, func, INTEL_GEN11_BSM_DW1) << 32;
349 
350 	return bsm;
351 }
352 
i830_stolen_size(int num,int slot,int func)353 static resource_size_t __init i830_stolen_size(int num, int slot, int func)
354 {
355 	u16 gmch_ctrl;
356 	u16 gms;
357 
358 	gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
359 	gms = gmch_ctrl & I830_GMCH_GMS_MASK;
360 
361 	switch (gms) {
362 	case I830_GMCH_GMS_STOLEN_512:	return KB(512);
363 	case I830_GMCH_GMS_STOLEN_1024:	return MB(1);
364 	case I830_GMCH_GMS_STOLEN_8192:	return MB(8);
365 	/* local memory isn't part of the normal address space */
366 	case I830_GMCH_GMS_LOCAL:	return 0;
367 	default:
368 		WARN(1, "Unknown GMCH_CTRL value: %x!\n", gmch_ctrl);
369 	}
370 
371 	return 0;
372 }
373 
gen3_stolen_size(int num,int slot,int func)374 static resource_size_t __init gen3_stolen_size(int num, int slot, int func)
375 {
376 	u16 gmch_ctrl;
377 	u16 gms;
378 
379 	gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
380 	gms = gmch_ctrl & I855_GMCH_GMS_MASK;
381 
382 	switch (gms) {
383 	case I855_GMCH_GMS_STOLEN_1M:	return MB(1);
384 	case I855_GMCH_GMS_STOLEN_4M:	return MB(4);
385 	case I855_GMCH_GMS_STOLEN_8M:	return MB(8);
386 	case I855_GMCH_GMS_STOLEN_16M:	return MB(16);
387 	case I855_GMCH_GMS_STOLEN_32M:	return MB(32);
388 	case I915_GMCH_GMS_STOLEN_48M:	return MB(48);
389 	case I915_GMCH_GMS_STOLEN_64M:	return MB(64);
390 	case G33_GMCH_GMS_STOLEN_128M:	return MB(128);
391 	case G33_GMCH_GMS_STOLEN_256M:	return MB(256);
392 	case INTEL_GMCH_GMS_STOLEN_96M:	return MB(96);
393 	case INTEL_GMCH_GMS_STOLEN_160M:return MB(160);
394 	case INTEL_GMCH_GMS_STOLEN_224M:return MB(224);
395 	case INTEL_GMCH_GMS_STOLEN_352M:return MB(352);
396 	default:
397 		WARN(1, "Unknown GMCH_CTRL value: %x!\n", gmch_ctrl);
398 	}
399 
400 	return 0;
401 }
402 
gen6_stolen_size(int num,int slot,int func)403 static resource_size_t __init gen6_stolen_size(int num, int slot, int func)
404 {
405 	u16 gmch_ctrl;
406 	u16 gms;
407 
408 	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
409 	gms = (gmch_ctrl >> SNB_GMCH_GMS_SHIFT) & SNB_GMCH_GMS_MASK;
410 
411 	return gms * MB(32);
412 }
413 
gen8_stolen_size(int num,int slot,int func)414 static resource_size_t __init gen8_stolen_size(int num, int slot, int func)
415 {
416 	u16 gmch_ctrl;
417 	u16 gms;
418 
419 	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
420 	gms = (gmch_ctrl >> BDW_GMCH_GMS_SHIFT) & BDW_GMCH_GMS_MASK;
421 
422 	return gms * MB(32);
423 }
424 
chv_stolen_size(int num,int slot,int func)425 static resource_size_t __init chv_stolen_size(int num, int slot, int func)
426 {
427 	u16 gmch_ctrl;
428 	u16 gms;
429 
430 	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
431 	gms = (gmch_ctrl >> SNB_GMCH_GMS_SHIFT) & SNB_GMCH_GMS_MASK;
432 
433 	/*
434 	 * 0x0  to 0x10: 32MB increments starting at 0MB
435 	 * 0x11 to 0x16: 4MB increments starting at 8MB
436 	 * 0x17 to 0x1d: 4MB increments start at 36MB
437 	 */
438 	if (gms < 0x11)
439 		return gms * MB(32);
440 	else if (gms < 0x17)
441 		return (gms - 0x11) * MB(4) + MB(8);
442 	else
443 		return (gms - 0x17) * MB(4) + MB(36);
444 }
445 
gen9_stolen_size(int num,int slot,int func)446 static resource_size_t __init gen9_stolen_size(int num, int slot, int func)
447 {
448 	u16 gmch_ctrl;
449 	u16 gms;
450 
451 	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
452 	gms = (gmch_ctrl >> BDW_GMCH_GMS_SHIFT) & BDW_GMCH_GMS_MASK;
453 
454 	/* 0x0  to 0xef: 32MB increments starting at 0MB */
455 	/* 0xf0 to 0xfe: 4MB increments starting at 4MB */
456 	if (gms < 0xf0)
457 		return gms * MB(32);
458 	else
459 		return (gms - 0xf0) * MB(4) + MB(4);
460 }
461 
462 struct intel_early_ops {
463 	resource_size_t (*stolen_size)(int num, int slot, int func);
464 	resource_size_t (*stolen_base)(int num, int slot, int func,
465 				       resource_size_t size);
466 };
467 
468 static const struct intel_early_ops i830_early_ops __initconst = {
469 	.stolen_base = i830_stolen_base,
470 	.stolen_size = i830_stolen_size,
471 };
472 
473 static const struct intel_early_ops i845_early_ops __initconst = {
474 	.stolen_base = i845_stolen_base,
475 	.stolen_size = i830_stolen_size,
476 };
477 
478 static const struct intel_early_ops i85x_early_ops __initconst = {
479 	.stolen_base = i85x_stolen_base,
480 	.stolen_size = gen3_stolen_size,
481 };
482 
483 static const struct intel_early_ops i865_early_ops __initconst = {
484 	.stolen_base = i865_stolen_base,
485 	.stolen_size = gen3_stolen_size,
486 };
487 
488 static const struct intel_early_ops gen3_early_ops __initconst = {
489 	.stolen_base = gen3_stolen_base,
490 	.stolen_size = gen3_stolen_size,
491 };
492 
493 static const struct intel_early_ops gen6_early_ops __initconst = {
494 	.stolen_base = gen3_stolen_base,
495 	.stolen_size = gen6_stolen_size,
496 };
497 
498 static const struct intel_early_ops gen8_early_ops __initconst = {
499 	.stolen_base = gen3_stolen_base,
500 	.stolen_size = gen8_stolen_size,
501 };
502 
503 static const struct intel_early_ops gen9_early_ops __initconst = {
504 	.stolen_base = gen3_stolen_base,
505 	.stolen_size = gen9_stolen_size,
506 };
507 
508 static const struct intel_early_ops chv_early_ops __initconst = {
509 	.stolen_base = gen3_stolen_base,
510 	.stolen_size = chv_stolen_size,
511 };
512 
513 static const struct intel_early_ops gen11_early_ops __initconst = {
514 	.stolen_base = gen11_stolen_base,
515 	.stolen_size = gen9_stolen_size,
516 };
517 
518 static const struct pci_device_id intel_early_ids[] __initconst = {
519 	INTEL_I830_IDS(&i830_early_ops),
520 	INTEL_I845G_IDS(&i845_early_ops),
521 	INTEL_I85X_IDS(&i85x_early_ops),
522 	INTEL_I865G_IDS(&i865_early_ops),
523 	INTEL_I915G_IDS(&gen3_early_ops),
524 	INTEL_I915GM_IDS(&gen3_early_ops),
525 	INTEL_I945G_IDS(&gen3_early_ops),
526 	INTEL_I945GM_IDS(&gen3_early_ops),
527 	INTEL_VLV_IDS(&gen6_early_ops),
528 	INTEL_PINEVIEW_IDS(&gen3_early_ops),
529 	INTEL_I965G_IDS(&gen3_early_ops),
530 	INTEL_G33_IDS(&gen3_early_ops),
531 	INTEL_I965GM_IDS(&gen3_early_ops),
532 	INTEL_GM45_IDS(&gen3_early_ops),
533 	INTEL_G45_IDS(&gen3_early_ops),
534 	INTEL_IRONLAKE_D_IDS(&gen3_early_ops),
535 	INTEL_IRONLAKE_M_IDS(&gen3_early_ops),
536 	INTEL_SNB_D_IDS(&gen6_early_ops),
537 	INTEL_SNB_M_IDS(&gen6_early_ops),
538 	INTEL_IVB_M_IDS(&gen6_early_ops),
539 	INTEL_IVB_D_IDS(&gen6_early_ops),
540 	INTEL_HSW_IDS(&gen6_early_ops),
541 	INTEL_BDW_IDS(&gen8_early_ops),
542 	INTEL_CHV_IDS(&chv_early_ops),
543 	INTEL_SKL_IDS(&gen9_early_ops),
544 	INTEL_BXT_IDS(&gen9_early_ops),
545 	INTEL_KBL_IDS(&gen9_early_ops),
546 	INTEL_CFL_IDS(&gen9_early_ops),
547 	INTEL_GLK_IDS(&gen9_early_ops),
548 	INTEL_CNL_IDS(&gen9_early_ops),
549 	INTEL_ICL_11_IDS(&gen11_early_ops),
550 };
551 
552 struct resource intel_graphics_stolen_res __ro_after_init = DEFINE_RES_MEM(0, 0);
553 EXPORT_SYMBOL(intel_graphics_stolen_res);
554 
555 static void __init
intel_graphics_stolen(int num,int slot,int func,const struct intel_early_ops * early_ops)556 intel_graphics_stolen(int num, int slot, int func,
557 		      const struct intel_early_ops *early_ops)
558 {
559 	resource_size_t base, size;
560 	resource_size_t end;
561 
562 	size = early_ops->stolen_size(num, slot, func);
563 	base = early_ops->stolen_base(num, slot, func, size);
564 
565 	if (!size || !base)
566 		return;
567 
568 	end = base + size - 1;
569 
570 	intel_graphics_stolen_res.start = base;
571 	intel_graphics_stolen_res.end = end;
572 
573 	printk(KERN_INFO "Reserving Intel graphics memory at %pR\n",
574 	       &intel_graphics_stolen_res);
575 
576 	/* Mark this space as reserved */
577 	e820__range_add(base, size, E820_TYPE_RESERVED);
578 	e820__update_table(e820_table);
579 }
580 
intel_graphics_quirks(int num,int slot,int func)581 static void __init intel_graphics_quirks(int num, int slot, int func)
582 {
583 	const struct intel_early_ops *early_ops;
584 	u16 device;
585 	int i;
586 
587 	device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
588 
589 	for (i = 0; i < ARRAY_SIZE(intel_early_ids); i++) {
590 		kernel_ulong_t driver_data = intel_early_ids[i].driver_data;
591 
592 		if (intel_early_ids[i].device != device)
593 			continue;
594 
595 		early_ops = (typeof(early_ops))driver_data;
596 
597 		intel_graphics_stolen(num, slot, func, early_ops);
598 
599 		return;
600 	}
601 }
602 
force_disable_hpet(int num,int slot,int func)603 static void __init force_disable_hpet(int num, int slot, int func)
604 {
605 #ifdef CONFIG_HPET_TIMER
606 	boot_hpet_disable = true;
607 	pr_info("x86/hpet: Will disable the HPET for this platform because it's not reliable\n");
608 #endif
609 }
610 
611 #define BCM4331_MMIO_SIZE	16384
612 #define BCM4331_PM_CAP		0x40
613 #define bcma_aread32(reg)	ioread32(mmio + 1 * BCMA_CORE_SIZE + reg)
614 #define bcma_awrite32(reg, val)	iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg)
615 
apple_airport_reset(int bus,int slot,int func)616 static void __init apple_airport_reset(int bus, int slot, int func)
617 {
618 	void __iomem *mmio;
619 	u16 pmcsr;
620 	u64 addr;
621 	int i;
622 
623 	if (!x86_apple_machine)
624 		return;
625 
626 	/* Card may have been put into PCI_D3hot by grub quirk */
627 	pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
628 
629 	if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
630 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
631 		write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr);
632 		mdelay(10);
633 
634 		pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
635 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
636 			pr_err("pci 0000:%02x:%02x.%d: Cannot power up Apple AirPort card\n",
637 			       bus, slot, func);
638 			return;
639 		}
640 	}
641 
642 	addr  =      read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
643 	addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32;
644 	addr &= PCI_BASE_ADDRESS_MEM_MASK;
645 
646 	mmio = early_ioremap(addr, BCM4331_MMIO_SIZE);
647 	if (!mmio) {
648 		pr_err("pci 0000:%02x:%02x.%d: Cannot iomap Apple AirPort card\n",
649 		       bus, slot, func);
650 		return;
651 	}
652 
653 	pr_info("Resetting Apple AirPort card (left enabled by EFI)\n");
654 
655 	for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++)
656 		udelay(10);
657 
658 	bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
659 	bcma_aread32(BCMA_RESET_CTL);
660 	udelay(1);
661 
662 	bcma_awrite32(BCMA_RESET_CTL, 0);
663 	bcma_aread32(BCMA_RESET_CTL);
664 	udelay(10);
665 
666 	early_iounmap(mmio, BCM4331_MMIO_SIZE);
667 }
668 
669 #define QFLAG_APPLY_ONCE 	0x1
670 #define QFLAG_APPLIED		0x2
671 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
672 struct chipset {
673 	u32 vendor;
674 	u32 device;
675 	u32 class;
676 	u32 class_mask;
677 	u32 flags;
678 	void (*f)(int num, int slot, int func);
679 };
680 
681 static struct chipset early_qrk[] __initdata = {
682 	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
683 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
684 	{ PCI_VENDOR_ID_VIA, PCI_ANY_ID,
685 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
686 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
687 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
688 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
689 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
690 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
691 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
692 	{ PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
693 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
694 	{ PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST,
695 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
696 	{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
697 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
698 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
699 	  QFLAG_APPLY_ONCE, intel_graphics_quirks },
700 	/*
701 	 * HPET on the current version of the Baytrail platform has accuracy
702 	 * problems: it will halt in deep idle state - so we disable it.
703 	 *
704 	 * More details can be found in section 18.10.1.3 of the datasheet:
705 	 *
706 	 *    http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf
707 	 */
708 	{ PCI_VENDOR_ID_INTEL, 0x0f00,
709 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
710 	{ PCI_VENDOR_ID_BROADCOM, 0x4331,
711 	  PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
712 	{}
713 };
714 
715 static void __init early_pci_scan_bus(int bus);
716 
717 /**
718  * check_dev_quirk - apply early quirks to a given PCI device
719  * @num: bus number
720  * @slot: slot number
721  * @func: PCI function
722  *
723  * Check the vendor & device ID against the early quirks table.
724  *
725  * If the device is single function, let early_pci_scan_bus() know so we don't
726  * poke at this device again.
727  */
check_dev_quirk(int num,int slot,int func)728 static int __init check_dev_quirk(int num, int slot, int func)
729 {
730 	u16 class;
731 	u16 vendor;
732 	u16 device;
733 	u8 type;
734 	u8 sec;
735 	int i;
736 
737 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
738 
739 	if (class == 0xffff)
740 		return -1; /* no class, treat as single function */
741 
742 	vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
743 
744 	device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
745 
746 	for (i = 0; early_qrk[i].f != NULL; i++) {
747 		if (((early_qrk[i].vendor == PCI_ANY_ID) ||
748 			(early_qrk[i].vendor == vendor)) &&
749 			((early_qrk[i].device == PCI_ANY_ID) ||
750 			(early_qrk[i].device == device)) &&
751 			(!((early_qrk[i].class ^ class) &
752 			    early_qrk[i].class_mask))) {
753 				if ((early_qrk[i].flags &
754 				     QFLAG_DONE) != QFLAG_DONE)
755 					early_qrk[i].f(num, slot, func);
756 				early_qrk[i].flags |= QFLAG_APPLIED;
757 			}
758 	}
759 
760 	type = read_pci_config_byte(num, slot, func,
761 				    PCI_HEADER_TYPE);
762 
763 	if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
764 		sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS);
765 		if (sec > num)
766 			early_pci_scan_bus(sec);
767 	}
768 
769 	if (!(type & 0x80))
770 		return -1;
771 
772 	return 0;
773 }
774 
early_pci_scan_bus(int bus)775 static void __init early_pci_scan_bus(int bus)
776 {
777 	int slot, func;
778 
779 	/* Poor man's PCI discovery */
780 	for (slot = 0; slot < 32; slot++)
781 		for (func = 0; func < 8; func++) {
782 			/* Only probe function 0 on single fn devices */
783 			if (check_dev_quirk(bus, slot, func))
784 				break;
785 		}
786 }
787 
early_quirks(void)788 void __init early_quirks(void)
789 {
790 	if (!early_pci_allowed())
791 		return;
792 
793 	early_pci_scan_bus(0);
794 }
795