1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * arch/arm/mach-ixp4xx/include/mach/platform.h
4  *
5  * Constants and functions that are useful to IXP4xx platform-specific code
6  * and device drivers.
7  *
8  * Copyright (C) 2004 MontaVista Software, Inc.
9  */
10 
11 #ifndef __ASM_ARCH_HARDWARE_H__
12 #error "Do not include this directly, instead #include <mach/hardware.h>"
13 #endif
14 
15 #ifndef __ASSEMBLY__
16 
17 #include <linux/reboot.h>
18 
19 #include <asm/types.h>
20 
21 #ifndef	__ARMEB__
22 #define	REG_OFFSET	0
23 #else
24 #define	REG_OFFSET	3
25 #endif
26 
27 /*
28  * Expansion bus memory regions
29  */
30 #define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
31 
32 /*
33  * The expansion bus on the IXP4xx can be configured for either 16 or
34  * 32MB windows and the CS offset for each region changes based on the
35  * current configuration. This means that we cannot simply hardcode
36  * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
37  * as setup by the bootloader to determine our window size.
38  */
39 extern unsigned long ixp4xx_exp_bus_size;
40 
41 #define	IXP4XX_EXP_BUS_BASE(region)\
42 		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
43 
44 #define IXP4XX_EXP_BUS_END(region)\
45 		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
46 
47 /* Those macros can be used to adjust timing and configure
48  * other features for each region.
49  */
50 
51 #define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
52 #define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
53 #define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
54 #define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
55 #define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
56 #define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
57 #define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
58 
59 #define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
60 #define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
61 #define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
62 #define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
63 #define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
64 #define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
65 #define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
66 
67 #define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
68 #define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
69 #define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
70 
71 #define IXP4XX_FLASH_WRITABLE	(0x2)
72 #define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
73 #define IXP4XX_FLASH_WRITE	(0xbcd23c42)
74 
75 /*
76  * Clock Speed Definitions.
77  */
78 #define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66MHzi APB BUS   */
79 #define IXP4XX_UART_XTAL        	14745600
80 
81 /*
82  * This structure provide a means for the board setup code
83  * to give information to th pata_ixp4xx driver. It is
84  * passed as platform_data.
85  */
86 struct ixp4xx_pata_data {
87 	volatile u32	*cs0_cfg;
88 	volatile u32	*cs1_cfg;
89 	unsigned long	cs0_bits;
90 	unsigned long	cs1_bits;
91 	void __iomem	*cs0;
92 	void __iomem	*cs1;
93 };
94 
95 #define IXP4XX_ETH_NPEA		0x00
96 #define IXP4XX_ETH_NPEB		0x10
97 #define IXP4XX_ETH_NPEC		0x20
98 
99 /* Information about built-in Ethernet MAC interfaces */
100 struct eth_plat_info {
101 	u8 phy;		/* MII PHY ID, 0 - 31 */
102 	u8 rxq;		/* configurable, currently 0 - 31 only */
103 	u8 txreadyq;
104 	u8 hwaddr[6];
105 };
106 
107 /* Information about built-in HSS (synchronous serial) interfaces */
108 struct hss_plat_info {
109 	int (*set_clock)(int port, unsigned int clock_type);
110 	int (*open)(int port, void *pdev,
111 		    void (*set_carrier_cb)(void *pdev, int carrier));
112 	void (*close)(int port, void *pdev);
113 	u8 txreadyq;
114 };
115 
116 /*
117  * Frequency of clock used for primary clocksource
118  */
119 extern unsigned long ixp4xx_timer_freq;
120 
121 /*
122  * Functions used by platform-level setup code
123  */
124 extern void ixp4xx_map_io(void);
125 extern void ixp4xx_init_early(void);
126 extern void ixp4xx_init_irq(void);
127 extern void ixp4xx_sys_init(void);
128 extern void ixp4xx_timer_init(void);
129 extern void ixp4xx_restart(enum reboot_mode, const char *);
130 extern void ixp4xx_pci_preinit(void);
131 struct pci_sys_data;
132 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
133 extern struct pci_ops ixp4xx_ops;
134 
135 #endif // __ASSEMBLY__
136 
137