1/* 2 * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42#include <dt-bindings/gpio/gpio.h> 43#include <dt-bindings/interrupt-controller/irq.h> 44#include <dt-bindings/pwm/pwm.h> 45 46/ { 47 aliases { 48 can0 = &can2; 49 can1 = &can1; 50 display = &display; 51 i2c0 = &i2c2; 52 i2c1 = &i2c_gpio; 53 i2c2 = &i2c1; 54 i2c3 = &i2c3; 55 i2c4 = &i2c4; 56 lcdif-23bit-pins-a = &pinctrl_disp0_1; 57 lcdif-24bit-pins-a = &pinctrl_disp0_2; 58 pwm0 = &pwm5; 59 reg-can-xcvr = ®_can_xcvr; 60 serial2 = &uart5; 61 serial4 = &uart3; 62 spi0 = &ecspi2; 63 spi1 = &spi_gpio; 64 stk5led = &user_led; 65 usbh1 = &usbotg2; 66 usbotg = &usbotg1; 67 }; 68 69 chosen { 70 stdout-path = &uart1; 71 }; 72 73 memory@80000000 { 74 reg = <0x80000000 0>; /* will be filled by U-Boot */ 75 }; 76 77 clocks { 78 mclk: mclk { 79 compatible = "fixed-clock"; 80 #clock-cells = <0>; 81 clock-frequency = <26000000>; 82 }; 83 }; 84 85 backlight: backlight { 86 compatible = "pwm-backlight"; 87 pinctrl-names = "default"; 88 pinctrl-0 = <&pinctrl_lcd_rst>; 89 enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; 90 pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>; 91 power-supply = <®_lcd_pwr>; 92 /* 93 * a poor man's way to create a 1:1 relationship between 94 * the PWM value and the actual duty cycle 95 */ 96 brightness-levels = < 0 1 2 3 4 5 6 7 8 9 97 10 11 12 13 14 15 16 17 18 19 98 20 21 22 23 24 25 26 27 28 29 99 30 31 32 33 34 35 36 37 38 39 100 40 41 42 43 44 45 46 47 48 49 101 50 51 52 53 54 55 56 57 58 59 102 60 61 62 63 64 65 66 67 68 69 103 70 71 72 73 74 75 76 77 78 79 104 80 81 82 83 84 85 86 87 88 89 105 90 91 92 93 94 95 96 97 98 99 106 100>; 107 default-brightness-level = <50>; 108 }; 109 110 i2c_gpio: i2c-gpio { 111 compatible = "i2c-gpio"; 112 #address-cells = <1>; 113 #size-cells = <0>; 114 pinctrl-names = "default"; 115 pinctrl-0 = <&pinctrl_i2c_gpio>; 116 gpios = < 117 &gpio5 1 GPIO_ACTIVE_HIGH /* SDA */ 118 &gpio5 0 GPIO_ACTIVE_HIGH /* SCL */ 119 >; 120 clock-frequency = <400000>; 121 status = "okay"; 122 123 ds1339: rtc@68 { 124 compatible = "dallas,ds1339"; 125 reg = <0x68>; 126 status = "disabled"; 127 }; 128 }; 129 130 leds { 131 compatible = "gpio-leds"; 132 133 user_led: user { 134 label = "Heartbeat"; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pinctrl_led>; 137 gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; 138 linux,default-trigger = "heartbeat"; 139 }; 140 }; 141 142 reg_3v3_etn: regulator-3v3etn { 143 compatible = "regulator-fixed"; 144 regulator-name = "3V3_ETN"; 145 regulator-min-microvolt = <3300000>; 146 regulator-max-microvolt = <3300000>; 147 pinctrl-names = "default"; 148 pinctrl-0 = <&pinctrl_etnphy_power>; 149 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; 150 enable-active-high; 151 }; 152 153 reg_2v5: regulator-2v5 { 154 compatible = "regulator-fixed"; 155 regulator-name = "2V5"; 156 regulator-min-microvolt = <2500000>; 157 regulator-max-microvolt = <2500000>; 158 regulator-always-on; 159 }; 160 161 reg_3v3: regulator-3v3 { 162 compatible = "regulator-fixed"; 163 regulator-name = "3V3"; 164 regulator-min-microvolt = <3300000>; 165 regulator-max-microvolt = <3300000>; 166 regulator-always-on; 167 }; 168 169 reg_can_xcvr: regulator-canxcvr { 170 compatible = "regulator-fixed"; 171 regulator-name = "CAN XCVR"; 172 regulator-min-microvolt = <3300000>; 173 regulator-max-microvolt = <3300000>; 174 pinctrl-names = "default"; 175 pinctrl-0 = <&pinctrl_flexcan_xcvr>; 176 gpio = <&gpio3 5 GPIO_ACTIVE_LOW>; 177 }; 178 179 reg_lcd_pwr: regulator-lcdpwr { 180 compatible = "regulator-fixed"; 181 regulator-name = "LCD POWER"; 182 regulator-min-microvolt = <3300000>; 183 regulator-max-microvolt = <3300000>; 184 pinctrl-names = "default"; 185 pinctrl-0 = <&pinctrl_lcd_pwr>; 186 gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>; 187 enable-active-high; 188 regulator-boot-on; 189 regulator-always-on; 190 }; 191 192 reg_usbh1_vbus: regulator-usbh1vbus { 193 compatible = "regulator-fixed"; 194 regulator-name = "usbh1_vbus"; 195 regulator-min-microvolt = <5000000>; 196 regulator-max-microvolt = <5000000>; 197 pinctrl-names = "default"; 198 pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>; 199 gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; 200 enable-active-high; 201 }; 202 203 reg_usbotg_vbus: regulator-usbotgvbus { 204 compatible = "regulator-fixed"; 205 regulator-name = "usbotg_vbus"; 206 regulator-min-microvolt = <5000000>; 207 regulator-max-microvolt = <5000000>; 208 pinctrl-names = "default"; 209 pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>; 210 gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; 211 enable-active-high; 212 }; 213 214 spi_gpio: spi-gpio { 215 #address-cells = <1>; 216 #size-cells = <0>; 217 compatible = "spi-gpio"; 218 pinctrl-names = "default"; 219 pinctrl-0 = <&pinctrl_spi_gpio>; 220 gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>; 221 gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>; 222 gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; 223 num-chipselects = <2>; 224 cs-gpios = < 225 &gpio1 29 GPIO_ACTIVE_HIGH 226 &gpio1 10 GPIO_ACTIVE_HIGH 227 >; 228 status = "disabled"; 229 230 spi@0 { 231 compatible = "spidev"; 232 reg = <0>; 233 spi-max-frequency = <660000>; 234 }; 235 236 spi@1 { 237 compatible = "spidev"; 238 reg = <1>; 239 spi-max-frequency = <660000>; 240 }; 241 }; 242 243 sound { 244 compatible = "karo,imx6ul-tx6ul-sgtl5000", 245 "simple-audio-card"; 246 simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio"; 247 simple-audio-card,format = "i2s"; 248 simple-audio-card,bitclock-master = <&codec_dai>; 249 simple-audio-card,frame-master = <&codec_dai>; 250 simple-audio-card,widgets = 251 "Microphone", "Mic Jack", 252 "Line", "Line In", 253 "Line", "Line Out", 254 "Headphone", "Headphone Jack"; 255 simple-audio-card,routing = 256 "MIC_IN", "Mic Jack", 257 "Mic Jack", "Mic Bias", 258 "Headphone Jack", "HP_OUT"; 259 260 cpu_dai: simple-audio-card,cpu { 261 sound-dai = <&sai2>; 262 }; 263 264 codec_dai: simple-audio-card,codec { 265 sound-dai = <&sgtl5000>; 266 }; 267 }; 268}; 269 270&can1 { 271 pinctrl-names = "default"; 272 pinctrl-0 = <&pinctrl_flexcan1>; 273 xceiver-supply = <®_can_xcvr>; 274 status = "okay"; 275}; 276 277&can2 { 278 pinctrl-names = "default"; 279 pinctrl-0 = <&pinctrl_flexcan2>; 280 xceiver-supply = <®_can_xcvr>; 281 status = "okay"; 282}; 283 284&ecspi2 { 285 pinctrl-names = "default"; 286 pinctrl-0 = <&pinctrl_ecspi2>; 287 cs-gpios = < 288 &gpio1 29 GPIO_ACTIVE_HIGH 289 &gpio1 10 GPIO_ACTIVE_HIGH 290 >; 291 status = "disabled"; 292 293 spidev0: spi@0 { 294 compatible = "spidev"; 295 reg = <0>; 296 spi-max-frequency = <60000000>; 297 }; 298 299 spidev1: spi@1 { 300 compatible = "spidev"; 301 reg = <1>; 302 spi-max-frequency = <60000000>; 303 }; 304}; 305 306&fec1 { 307 pinctrl-names = "default"; 308 pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; 309 phy-mode = "rmii"; 310 phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; 311 phy-supply = <®_3v3_etn>; 312 phy-handle = <&etnphy0>; 313 status = "okay"; 314 315 mdio { 316 #address-cells = <1>; 317 #size-cells = <0>; 318 319 etnphy0: ethernet-phy@0 { 320 compatible = "ethernet-phy-ieee802.3-c22"; 321 reg = <0>; 322 pinctrl-names = "default"; 323 pinctrl-0 = <&pinctrl_etnphy0_int>; 324 interrupt-parent = <&gpio5>; 325 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 326 status = "okay"; 327 }; 328 329 etnphy1: ethernet-phy@2 { 330 compatible = "ethernet-phy-ieee802.3-c22"; 331 reg = <2>; 332 pinctrl-names = "default"; 333 pinctrl-0 = <&pinctrl_etnphy1_int>; 334 interrupt-parent = <&gpio4>; 335 interrupts = <27 IRQ_TYPE_EDGE_FALLING>; 336 status = "okay"; 337 }; 338 }; 339}; 340 341&fec2 { 342 pinctrl-names = "default"; 343 pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; 344 phy-mode = "rmii"; 345 phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; 346 phy-supply = <®_3v3_etn>; 347 phy-handle = <&etnphy1>; 348 status = "disabled"; 349}; 350 351&gpmi { 352 pinctrl-names = "default"; 353 pinctrl-0 = <&pinctrl_gpmi_nand>; 354 nand-on-flash-bbt; 355 fsl,no-blockmark-swap; 356 status = "okay"; 357}; 358 359&i2c2 { 360 pinctrl-names = "default"; 361 pinctrl-0 = <&pinctrl_i2c2>; 362 clock-frequency = <400000>; 363 status = "okay"; 364 365 sgtl5000: codec@a { 366 compatible = "fsl,sgtl5000"; 367 reg = <0x0a>; 368 #sound-dai-cells = <0>; 369 VDDA-supply = <®_2v5>; 370 VDDIO-supply = <®_3v3>; 371 clocks = <&mclk>; 372 }; 373 374 polytouch: polytouch@38 { 375 compatible = "edt,edt-ft5x06"; 376 reg = <0x38>; 377 pinctrl-names = "default"; 378 pinctrl-0 = <&pinctrl_edt_ft5x06>; 379 interrupt-parent = <&gpio5>; 380 interrupts = <2 IRQ_TYPE_EDGE_FALLING>; 381 reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; 382 wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; 383 wakeup-source; 384 }; 385 386 touchscreen: touchscreen@48 { 387 compatible = "ti,tsc2007"; 388 reg = <0x48>; 389 pinctrl-names = "default"; 390 pinctrl-0 = <&pinctrl_tsc2007>; 391 interrupt-parent = <&gpio3>; 392 interrupts = <26 IRQ_TYPE_NONE>; 393 gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; 394 ti,x-plate-ohms = <660>; 395 wakeup-source; 396 }; 397}; 398 399&kpp { 400 pinctrl-names = "default"; 401 pinctrl-0 = <&pinctrl_kpp>; 402 /* sample keymap */ 403 /* row/col 0..3 are mapped to KPP row/col 4..7 */ 404 linux,keymap = < 405 MATRIX_KEY(4, 4, KEY_POWER) 406 MATRIX_KEY(4, 5, KEY_KP0) 407 MATRIX_KEY(4, 6, KEY_KP1) 408 MATRIX_KEY(4, 7, KEY_KP2) 409 MATRIX_KEY(5, 4, KEY_KP3) 410 MATRIX_KEY(5, 5, KEY_KP4) 411 MATRIX_KEY(5, 6, KEY_KP5) 412 MATRIX_KEY(5, 7, KEY_KP6) 413 MATRIX_KEY(6, 4, KEY_KP7) 414 MATRIX_KEY(6, 5, KEY_KP8) 415 MATRIX_KEY(6, 6, KEY_KP9) 416 >; 417 status = "okay"; 418}; 419 420&lcdif { 421 pinctrl-names = "default"; 422 pinctrl-0 = <&pinctrl_disp0_1>; 423 lcd-supply = <®_lcd_pwr>; 424 display = <&display>; 425 status = "okay"; 426 427 display: disp0 { 428 bits-per-pixel = <32>; 429 bus-width = <24>; 430 status = "okay"; 431 432 display-timings { 433 VGA { 434 clock-frequency = <25200000>; 435 hactive = <640>; 436 vactive = <480>; 437 hback-porch = <48>; 438 hsync-len = <96>; 439 hfront-porch = <16>; 440 vback-porch = <31>; 441 vsync-len = <2>; 442 vfront-porch = <12>; 443 hsync-active = <0>; 444 vsync-active = <0>; 445 de-active = <1>; 446 pixelclk-active = <1>; 447 }; 448 449 ETV570 { 450 clock-frequency = <25200000>; 451 hactive = <640>; 452 vactive = <480>; 453 hback-porch = <114>; 454 hsync-len = <30>; 455 hfront-porch = <16>; 456 vback-porch = <32>; 457 vsync-len = <3>; 458 vfront-porch = <10>; 459 hsync-active = <0>; 460 vsync-active = <0>; 461 de-active = <1>; 462 pixelclk-active = <1>; 463 }; 464 465 ET0350 { 466 clock-frequency = <6413760>; 467 hactive = <320>; 468 vactive = <240>; 469 hback-porch = <34>; 470 hsync-len = <34>; 471 hfront-porch = <20>; 472 vback-porch = <15>; 473 vsync-len = <3>; 474 vfront-porch = <4>; 475 hsync-active = <0>; 476 vsync-active = <0>; 477 de-active = <1>; 478 pixelclk-active = <1>; 479 }; 480 481 ET0430 { 482 clock-frequency = <9009000>; 483 hactive = <480>; 484 vactive = <272>; 485 hback-porch = <2>; 486 hsync-len = <41>; 487 hfront-porch = <2>; 488 vback-porch = <2>; 489 vsync-len = <10>; 490 vfront-porch = <2>; 491 hsync-active = <0>; 492 vsync-active = <0>; 493 de-active = <1>; 494 pixelclk-active = <0>; 495 }; 496 497 ET0500 { 498 clock-frequency = <33264000>; 499 hactive = <800>; 500 vactive = <480>; 501 hback-porch = <88>; 502 hsync-len = <128>; 503 hfront-porch = <40>; 504 vback-porch = <33>; 505 vsync-len = <2>; 506 vfront-porch = <10>; 507 hsync-active = <0>; 508 vsync-active = <0>; 509 de-active = <1>; 510 pixelclk-active = <1>; 511 }; 512 513 ET0700 { /* same as ET0500 */ 514 clock-frequency = <33264000>; 515 hactive = <800>; 516 vactive = <480>; 517 hback-porch = <88>; 518 hsync-len = <128>; 519 hfront-porch = <40>; 520 vback-porch = <33>; 521 vsync-len = <2>; 522 vfront-porch = <10>; 523 hsync-active = <0>; 524 vsync-active = <0>; 525 de-active = <1>; 526 pixelclk-active = <1>; 527 }; 528 529 ETQ570 { 530 clock-frequency = <6596040>; 531 hactive = <320>; 532 vactive = <240>; 533 hback-porch = <38>; 534 hsync-len = <30>; 535 hfront-porch = <30>; 536 vback-porch = <16>; 537 vsync-len = <3>; 538 vfront-porch = <4>; 539 hsync-active = <0>; 540 vsync-active = <0>; 541 de-active = <1>; 542 pixelclk-active = <1>; 543 }; 544 }; 545 }; 546}; 547 548&pwm5 { 549 pinctrl-names = "default"; 550 pinctrl-0 = <&pinctrl_pwm5>; 551 #pwm-cells = <3>; 552 status = "okay"; 553}; 554 555&sai2 { 556 pinctrl-names = "default"; 557 pinctrl-0 = <&pinctrl_sai2>; 558 status = "okay"; 559}; 560 561&uart1 { 562 pinctrl-names = "default"; 563 pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; 564 uart-has-rtscts; 565 status = "okay"; 566}; 567 568&uart2 { 569 pinctrl-names = "default"; 570 pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; 571 uart-has-rtscts; 572 status = "okay"; 573}; 574 575&uart5 { 576 pinctrl-names = "default"; 577 pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>; 578 uart-has-rtscts; 579 status = "okay"; 580}; 581 582&usbotg1 { 583 vbus-supply = <®_usbotg_vbus>; 584 dr_mode = "peripheral"; 585 disable-over-current; 586 status = "okay"; 587}; 588 589&usbotg2 { 590 vbus-supply = <®_usbh1_vbus>; 591 dr_mode = "host"; 592 disable-over-current; 593 status = "okay"; 594}; 595 596&usdhc1 { 597 pinctrl-names = "default"; 598 pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>; 599 bus-width = <4>; 600 no-1-8-v; 601 cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; 602 fsl,wp-controller; 603 status = "okay"; 604}; 605 606&iomuxc { 607 pinctrl-names = "default"; 608 pinctrl-0 = <&pinctrl_hog>; 609 610 pinctrl_hog: hoggrp { 611 }; 612 613 pinctrl_led: ledgrp { 614 fsl,pins = < 615 MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */ 616 >; 617 }; 618 619 pinctrl_disp0_1: disp0grp-1 { 620 fsl,pins = < 621 MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ 622 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ 623 MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ 624 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ 625 /* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */ 626 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10 627 MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 628 MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 629 MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 630 MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 631 MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 632 MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 633 MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10 634 MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10 635 MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 636 MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 637 MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 638 MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 639 MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 640 MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 641 MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10 642 MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10 643 MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 644 MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 645 MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 646 MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 647 MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 648 MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 649 >; 650 }; 651 652 pinctrl_disp0_2: disp0grp-2 { 653 fsl,pins = < 654 MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ 655 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ 656 MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ 657 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ 658 MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x10 659 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x10 660 MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 661 MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 662 MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 663 MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 664 MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 665 MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 666 MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x10 667 MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x10 668 MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 669 MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 670 MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 671 MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 672 MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 673 MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 674 MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x10 675 MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x10 676 MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 677 MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 678 MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 679 MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 680 MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 681 MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 682 >; 683 }; 684 685 pinctrl_ecspi2: ecspi2grp { 686 fsl,pins = < 687 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */ 688 MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */ 689 MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x0b0b0 /* CSPI_MOSI */ 690 MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x0b0b0 /* CSPI_MISO */ 691 MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x0b0b0 /* CSPI_SCLK */ 692 >; 693 }; 694 695 pinctrl_edt_ft5x06: edt-ft5x06grp { 696 fsl,pins = < 697 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* Interrupt */ 698 MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* Reset */ 699 MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Wake */ 700 >; 701 }; 702 703 pinctrl_enet1: enet1grp { 704 fsl,pins = < 705 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x000b0 706 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x000b0 707 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x000b0 708 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x000b0 709 MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x000b0 710 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x000b0 711 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x000b0 712 MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 713 >; 714 }; 715 716 pinctrl_enet2: enet2grp { 717 fsl,pins = < 718 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x000b0 719 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x000b0 720 MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x000b0 721 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x000b0 722 MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x000b0 723 MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x000b0 724 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x000b0 725 MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x400000b1 726 >; 727 }; 728 729 pinctrl_enet1_mdio: enet1-mdiogrp { 730 fsl,pins = < 731 MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0b0b0 732 MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 733 >; 734 }; 735 736 pinctrl_etnphy_power: etnphy-pwrgrp { 737 fsl,pins = < 738 MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 /* ETN PHY POWER */ 739 >; 740 }; 741 742 pinctrl_etnphy0_int: etnphy-intgrp-0 { 743 fsl,pins = < 744 MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */ 745 >; 746 }; 747 748 pinctrl_etnphy0_rst: etnphy-rstgrp-0 { 749 fsl,pins = < 750 MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */ 751 >; 752 }; 753 754 pinctrl_etnphy1_int: etnphy-intgrp-1 { 755 fsl,pins = < 756 MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */ 757 >; 758 }; 759 760 pinctrl_etnphy1_rst: etnphy-rstgrp-1 { 761 fsl,pins = < 762 MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */ 763 >; 764 }; 765 766 pinctrl_flexcan1: flexcan1grp { 767 fsl,pins = < 768 MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 769 MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 770 >; 771 }; 772 773 pinctrl_flexcan2: flexcan2grp { 774 fsl,pins = < 775 MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 776 MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 777 >; 778 }; 779 780 pinctrl_flexcan_xcvr: flexcan-xcvrgrp { 781 fsl,pins = < 782 MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0b0b0 /* Flexcan XCVR enable */ 783 >; 784 }; 785 786 pinctrl_gpmi_nand: gpminandgrp { 787 fsl,pins = < 788 MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 789 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 790 MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 791 MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 792 MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 793 MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 794 MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 795 MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 796 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 797 MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 798 MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 799 MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 800 MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 801 MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 802 MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 803 >; 804 }; 805 806 pinctrl_i2c_gpio: i2c-gpiogrp { 807 fsl,pins = < 808 MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x4001b8b1 /* I2C SCL */ 809 MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x4001b8b1 /* I2C SDA */ 810 >; 811 }; 812 813 pinctrl_i2c2: i2c2grp { 814 fsl,pins = < 815 MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b1 816 MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b1 817 >; 818 }; 819 820 pinctrl_kpp: kppgrp { 821 fsl,pins = < 822 MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x1b0b0 823 MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x1b0b0 824 MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x1b0b0 825 MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x1b0b0 826 MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x1b0b0 827 MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x1b0b0 828 MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x1b0b0 829 MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x1b0b0 830 >; 831 }; 832 833 pinctrl_lcd_pwr: lcd-pwrgrp { 834 fsl,pins = < 835 MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 /* LCD Power Enable */ 836 >; 837 }; 838 839 pinctrl_lcd_rst: lcd-rstgrp { 840 fsl,pins = < 841 MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 /* LCD Reset */ 842 >; 843 }; 844 845 pinctrl_pwm5: pwm5grp { 846 fsl,pins = < 847 MX6UL_PAD_NAND_DQS__PWM5_OUT 0x0b0b0 848 >; 849 }; 850 851 pinctrl_sai2: sai2grp { 852 fsl,pins = < 853 MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0b0b0 /* SSI1_RXD */ 854 MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0b0b0 /* SSI1_TXD */ 855 MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0b0b0 /* SSI1_CLK */ 856 MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x0b0b0 /* SSI1_FS */ 857 >; 858 }; 859 860 pinctrl_spi_gpio: spi-gpiogrp { 861 fsl,pins = < 862 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x0b0b0 /* CSPI_SS */ 863 MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0b0b0 /* CSPI_SS */ 864 MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x0b0b0 /* CSPI_MOSI */ 865 MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x0b0b0 /* CSPI_MISO */ 866 MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x0b0b0 /* CSPI_SCLK */ 867 >; 868 }; 869 870 pinctrl_tsc2007: tsc2007grp { 871 fsl,pins = < 872 MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x1b0b0 /* Interrupt */ 873 >; 874 }; 875 876 pinctrl_uart1: uart1grp { 877 fsl,pins = < 878 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0b0b0 879 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0b0b0 880 >; 881 }; 882 883 pinctrl_uart1_rtscts: uart1-rtsctsgrp { 884 fsl,pins = < 885 MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0b0b0 886 MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x0b0b0 887 >; 888 }; 889 890 pinctrl_uart2: uart2grp { 891 fsl,pins = < 892 MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0b0b0 893 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0b0b0 894 >; 895 }; 896 897 pinctrl_uart2_rtscts: uart2-rtsctsgrp { 898 fsl,pins = < 899 MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x0b0b0 900 MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x0b0b0 901 >; 902 }; 903 904 pinctrl_uart5: uart5grp { 905 fsl,pins = < 906 MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x0b0b0 907 MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0b0b0 908 >; 909 }; 910 911 pinctrl_uart5_rtscts: uart5-rtsctsgrp { 912 fsl,pins = < 913 MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x0b0b0 914 MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0b0b0 915 >; 916 }; 917 918 pinctrl_usbh1_oc: usbh1-ocgrp { 919 fsl,pins = < 920 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x17059 /* USBH1_OC */ 921 >; 922 }; 923 924 pinctrl_usbh1_vbus: usbh1-vbusgrp { 925 fsl,pins = < 926 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0b0b0 /* USBH1_VBUSEN */ 927 >; 928 }; 929 930 pinctrl_usbotg_oc: usbotg-ocgrp { 931 fsl,pins = < 932 MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x17059 /* USBOTG_OC */ 933 >; 934 }; 935 936 pinctrl_usbotg_vbus: usbotg-vbusgrp { 937 fsl,pins = < 938 MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1b0b0 /* USBOTG_VBUSEN */ 939 >; 940 }; 941 942 pinctrl_usdhc1: usdhc1grp { 943 fsl,pins = < 944 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1 945 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099 946 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1 947 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1 948 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1 949 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1 950 >; 951 }; 952 953 pinctrl_usdhc1_cd: usdhc1cdgrp { 954 fsl,pins = < 955 MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x170b0 /* SD1 CD */ 956 >; 957 }; 958 959 pinctrl_usdhc2: usdhc2grp { 960 fsl,pins = < 961 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x070b1 962 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x070b1 963 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x070b1 964 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x070b1 965 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x070b1 966 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x070b1 967 /* eMMC RESET */ 968 MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0 969 >; 970 }; 971}; 972
