1/* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * Copyright 2011 Linaro Ltd. 4 * 5 * This file is dual-licensed: you can use it either under the terms 6 * of the GPL or the X11 license, at your option. Note that this dual 7 * licensing only applies to this file, and not this project as a 8 * whole. 9 * 10 * a) This file is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * version 2 as published by the Free Software Foundation. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include <dt-bindings/clock/imx6qdl-clock.h> 44#include <dt-bindings/gpio/gpio.h> 45#include <dt-bindings/input/input.h> 46 47/ { 48 chosen { 49 stdout-path = &uart2; 50 }; 51 52 memory@10000000 { 53 reg = <0x10000000 0x40000000>; 54 }; 55 56 regulators { 57 compatible = "simple-bus"; 58 #address-cells = <1>; 59 #size-cells = <0>; 60 61 reg_2p5v: regulator@0 { 62 compatible = "regulator-fixed"; 63 reg = <0>; 64 regulator-name = "2P5V"; 65 regulator-min-microvolt = <2500000>; 66 regulator-max-microvolt = <2500000>; 67 regulator-always-on; 68 }; 69 70 reg_3p3v: regulator@1 { 71 compatible = "regulator-fixed"; 72 reg = <1>; 73 regulator-name = "3P3V"; 74 regulator-min-microvolt = <3300000>; 75 regulator-max-microvolt = <3300000>; 76 regulator-always-on; 77 }; 78 79 reg_usb_otg_vbus: regulator@2 { 80 compatible = "regulator-fixed"; 81 reg = <2>; 82 regulator-name = "usb_otg_vbus"; 83 regulator-min-microvolt = <5000000>; 84 regulator-max-microvolt = <5000000>; 85 gpio = <&gpio3 22 0>; 86 enable-active-high; 87 }; 88 89 reg_can_xcvr: regulator@3 { 90 compatible = "regulator-fixed"; 91 reg = <3>; 92 regulator-name = "CAN XCVR"; 93 regulator-min-microvolt = <3300000>; 94 regulator-max-microvolt = <3300000>; 95 pinctrl-names = "default"; 96 pinctrl-0 = <&pinctrl_can_xcvr>; 97 gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; 98 }; 99 100 reg_1p5v: regulator@4 { 101 compatible = "regulator-fixed"; 102 reg = <4>; 103 regulator-name = "1P5V"; 104 regulator-min-microvolt = <1500000>; 105 regulator-max-microvolt = <1500000>; 106 regulator-always-on; 107 }; 108 109 reg_1p8v: regulator@5 { 110 compatible = "regulator-fixed"; 111 reg = <5>; 112 regulator-name = "1P8V"; 113 regulator-min-microvolt = <1800000>; 114 regulator-max-microvolt = <1800000>; 115 regulator-always-on; 116 }; 117 118 reg_2p8v: regulator@6 { 119 compatible = "regulator-fixed"; 120 reg = <6>; 121 regulator-name = "2P8V"; 122 regulator-min-microvolt = <2800000>; 123 regulator-max-microvolt = <2800000>; 124 regulator-always-on; 125 }; 126 127 reg_usb_h1_vbus: regulator@7 { 128 compatible = "regulator-fixed"; 129 reg = <7>; 130 pinctrl-names = "default"; 131 pinctrl-0 = <&pinctrl_usbh1>; 132 regulator-name = "usb_h1_vbus"; 133 regulator-min-microvolt = <3300000>; 134 regulator-max-microvolt = <3300000>; 135 gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; 136 enable-active-high; 137 }; 138 }; 139 140 mipi_xclk: mipi_xclk { 141 compatible = "pwm-clock"; 142 #clock-cells = <0>; 143 clock-frequency = <22000000>; 144 clock-output-names = "mipi_pwm3"; 145 pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */ 146 status = "okay"; 147 }; 148 149 gpio-keys { 150 compatible = "gpio-keys"; 151 pinctrl-names = "default"; 152 pinctrl-0 = <&pinctrl_gpio_keys>; 153 154 power { 155 label = "Power Button"; 156 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; 157 linux,code = <KEY_POWER>; 158 wakeup-source; 159 }; 160 161 menu { 162 label = "Menu"; 163 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 164 linux,code = <KEY_MENU>; 165 }; 166 167 home { 168 label = "Home"; 169 gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; 170 linux,code = <KEY_HOME>; 171 }; 172 173 back { 174 label = "Back"; 175 gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; 176 linux,code = <KEY_BACK>; 177 }; 178 179 volume-up { 180 label = "Volume Up"; 181 gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; 182 linux,code = <KEY_VOLUMEUP>; 183 }; 184 185 volume-down { 186 label = "Volume Down"; 187 gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; 188 linux,code = <KEY_VOLUMEDOWN>; 189 }; 190 }; 191 192 sound { 193 compatible = "fsl,imx6q-sabrelite-sgtl5000", 194 "fsl,imx-audio-sgtl5000"; 195 model = "imx6q-sabrelite-sgtl5000"; 196 ssi-controller = <&ssi1>; 197 audio-codec = <&codec>; 198 audio-routing = 199 "MIC_IN", "Mic Jack", 200 "Mic Jack", "Mic Bias", 201 "Headphone Jack", "HP_OUT"; 202 mux-int-port = <1>; 203 mux-ext-port = <4>; 204 }; 205 206 backlight_lcd: backlight-lcd { 207 compatible = "pwm-backlight"; 208 pwms = <&pwm1 0 5000000>; 209 brightness-levels = <0 4 8 16 32 64 128 255>; 210 default-brightness-level = <7>; 211 power-supply = <®_3p3v>; 212 status = "okay"; 213 }; 214 215 backlight_lvds: backlight-lvds { 216 compatible = "pwm-backlight"; 217 pwms = <&pwm4 0 5000000>; 218 brightness-levels = <0 4 8 16 32 64 128 255>; 219 default-brightness-level = <7>; 220 power-supply = <®_3p3v>; 221 status = "okay"; 222 }; 223 224 lcd_display: disp0 { 225 compatible = "fsl,imx-parallel-display"; 226 #address-cells = <1>; 227 #size-cells = <0>; 228 interface-pix-fmt = "bgr666"; 229 pinctrl-names = "default"; 230 pinctrl-0 = <&pinctrl_j15>; 231 status = "okay"; 232 233 port@0 { 234 reg = <0>; 235 236 lcd_display_in: endpoint { 237 remote-endpoint = <&ipu1_di0_disp0>; 238 }; 239 }; 240 241 port@1 { 242 reg = <1>; 243 244 lcd_display_out: endpoint { 245 remote-endpoint = <&lcd_panel_in>; 246 }; 247 }; 248 }; 249 250 panel-lcd { 251 compatible = "okaya,rs800480t-7x0gp"; 252 backlight = <&backlight_lcd>; 253 254 port { 255 lcd_panel_in: endpoint { 256 remote-endpoint = <&lcd_display_out>; 257 }; 258 }; 259 }; 260 261 panel-lvds0 { 262 compatible = "hannstar,hsd100pxn1"; 263 backlight = <&backlight_lvds>; 264 265 port { 266 panel_in: endpoint { 267 remote-endpoint = <&lvds0_out>; 268 }; 269 }; 270 }; 271}; 272 273&ipu1_csi0_from_ipu1_csi0_mux { 274 bus-width = <8>; 275 data-shift = <12>; /* Lines 19:12 used */ 276 hsync-active = <1>; 277 vync-active = <1>; 278}; 279 280&ipu1_csi0_mux_from_parallel_sensor { 281 remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; 282}; 283 284&ipu1_csi0 { 285 pinctrl-names = "default"; 286 pinctrl-0 = <&pinctrl_ipu1_csi0>; 287}; 288 289&audmux { 290 pinctrl-names = "default"; 291 pinctrl-0 = <&pinctrl_audmux>; 292 status = "okay"; 293}; 294 295&can1 { 296 pinctrl-names = "default"; 297 pinctrl-0 = <&pinctrl_can1>; 298 xceiver-supply = <®_can_xcvr>; 299 status = "okay"; 300}; 301 302&clks { 303 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 304 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 305 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 306 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 307}; 308 309&ecspi1 { 310 cs-gpios = <&gpio3 19 0>; 311 pinctrl-names = "default"; 312 pinctrl-0 = <&pinctrl_ecspi1>; 313 status = "okay"; 314 315 flash: m25p80@0 { 316 compatible = "sst,sst25vf016b", "jedec,spi-nor"; 317 spi-max-frequency = <20000000>; 318 reg = <0>; 319 }; 320}; 321 322&fec { 323 pinctrl-names = "default"; 324 pinctrl-0 = <&pinctrl_enet>; 325 phy-mode = "rgmii"; 326 phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; 327 txen-skew-ps = <0>; 328 txc-skew-ps = <3000>; 329 rxdv-skew-ps = <0>; 330 rxc-skew-ps = <3000>; 331 rxd0-skew-ps = <0>; 332 rxd1-skew-ps = <0>; 333 rxd2-skew-ps = <0>; 334 rxd3-skew-ps = <0>; 335 txd0-skew-ps = <0>; 336 txd1-skew-ps = <0>; 337 txd2-skew-ps = <0>; 338 txd3-skew-ps = <0>; 339 status = "okay"; 340}; 341 342&hdmi { 343 ddc-i2c-bus = <&i2c2>; 344 status = "okay"; 345}; 346 347&i2c1 { 348 clock-frequency = <100000>; 349 pinctrl-names = "default"; 350 pinctrl-0 = <&pinctrl_i2c1>; 351 status = "okay"; 352 353 codec: sgtl5000@a { 354 compatible = "fsl,sgtl5000"; 355 reg = <0x0a>; 356 clocks = <&clks IMX6QDL_CLK_CKO>; 357 VDDA-supply = <®_2p5v>; 358 VDDIO-supply = <®_3p3v>; 359 }; 360}; 361 362&i2c2 { 363 clock-frequency = <100000>; 364 pinctrl-names = "default"; 365 pinctrl-0 = <&pinctrl_i2c2>; 366 status = "okay"; 367 368 ov5640: camera@40 { 369 compatible = "ovti,ov5640"; 370 pinctrl-names = "default"; 371 pinctrl-0 = <&pinctrl_ov5640>; 372 reg = <0x40>; 373 clocks = <&mipi_xclk>; 374 clock-names = "xclk"; 375 DOVDD-supply = <®_1p8v>; 376 AVDD-supply = <®_2p8v>; 377 DVDD-supply = <®_1p5v>; 378 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */ 379 powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ 380 381 port { 382 ov5640_to_mipi_csi2: endpoint { 383 remote-endpoint = <&mipi_csi2_in>; 384 clock-lanes = <0>; 385 data-lanes = <1 2>; 386 }; 387 }; 388 }; 389 390 ov5642: camera@42 { 391 compatible = "ovti,ov5642"; 392 pinctrl-names = "default"; 393 pinctrl-0 = <&pinctrl_ov5642>; 394 clocks = <&clks IMX6QDL_CLK_CKO2>; 395 clock-names = "xclk"; 396 reg = <0x42>; 397 reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; 398 powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; 399 gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; 400 status = "disabled"; 401 402 port { 403 ov5642_to_ipu1_csi0_mux: endpoint { 404 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; 405 bus-width = <8>; 406 hsync-active = <1>; 407 vsync-active = <1>; 408 }; 409 }; 410 }; 411}; 412 413&i2c3 { 414 clock-frequency = <100000>; 415 pinctrl-names = "default"; 416 pinctrl-0 = <&pinctrl_i2c3>; 417 status = "okay"; 418}; 419 420&iomuxc { 421 pinctrl-names = "default"; 422 pinctrl-0 = <&pinctrl_hog>; 423 424 imx6q-sabrelite { 425 pinctrl_hog: hoggrp { 426 fsl,pins = < 427 /* SGTL5000 sys_mclk */ 428 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 429 >; 430 }; 431 432 pinctrl_audmux: audmuxgrp { 433 fsl,pins = < 434 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 435 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 436 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 437 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 438 >; 439 }; 440 441 pinctrl_can1: can1grp { 442 fsl,pins = < 443 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 444 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 445 >; 446 }; 447 448 pinctrl_can_xcvr: can-xcvrgrp { 449 fsl,pins = < 450 /* Flexcan XCVR enable */ 451 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 452 >; 453 }; 454 455 pinctrl_ecspi1: ecspi1grp { 456 fsl,pins = < 457 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 458 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 459 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 460 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */ 461 >; 462 }; 463 464 pinctrl_enet: enetgrp { 465 fsl,pins = < 466 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 467 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 468 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 469 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 470 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 471 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 472 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 473 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 474 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 475 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 476 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 477 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 478 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 479 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 480 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 481 /* Phy reset */ 482 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 483 >; 484 }; 485 486 pinctrl_gpio_keys: gpio-keysgrp { 487 fsl,pins = < 488 /* Power Button */ 489 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 490 /* Menu Button */ 491 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 492 /* Home Button */ 493 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 494 /* Back Button */ 495 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 496 /* Volume Up Button */ 497 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 498 /* Volume Down Button */ 499 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 500 >; 501 }; 502 503 pinctrl_i2c1: i2c1grp { 504 fsl,pins = < 505 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 506 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 507 >; 508 }; 509 510 pinctrl_i2c2: i2c2grp { 511 fsl,pins = < 512 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 513 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 514 >; 515 }; 516 517 pinctrl_i2c3: i2c3grp { 518 fsl,pins = < 519 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 520 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 521 >; 522 }; 523 524 pinctrl_ipu1_csi0: ipu1csi0grp { 525 fsl,pins = < 526 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 527 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 528 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 529 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 530 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 531 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 532 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 533 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 534 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 535 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 536 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 537 MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 538 >; 539 }; 540 541 pinctrl_j15: j15grp { 542 fsl,pins = < 543 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 544 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 545 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 546 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 547 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 548 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 549 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 550 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 551 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 552 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 553 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 554 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 555 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 556 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 557 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 558 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 559 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 560 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 561 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 562 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 563 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 564 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 565 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 566 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 567 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 568 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 569 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 570 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 571 >; 572 }; 573 574 pinctrl_ov5640: ov5640grp { 575 fsl,pins = < 576 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 577 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 578 >; 579 }; 580 581 pinctrl_ov5642: ov5642grp { 582 fsl,pins = < 583 MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 584 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 585 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 586 MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 587 >; 588 }; 589 590 pinctrl_pwm1: pwm1grp { 591 fsl,pins = < 592 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 593 >; 594 }; 595 596 pinctrl_pwm3: pwm3grp { 597 fsl,pins = < 598 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 599 >; 600 }; 601 602 pinctrl_pwm4: pwm4grp { 603 fsl,pins = < 604 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 605 >; 606 }; 607 608 pinctrl_uart1: uart1grp { 609 fsl,pins = < 610 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 611 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 612 >; 613 }; 614 615 pinctrl_uart2: uart2grp { 616 fsl,pins = < 617 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 618 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 619 >; 620 }; 621 622 pinctrl_usbh1: usbh1grp { 623 fsl,pins = < 624 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 625 >; 626 }; 627 628 pinctrl_usbotg: usbotggrp { 629 fsl,pins = < 630 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 631 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 632 /* power enable, high active */ 633 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 634 >; 635 }; 636 637 pinctrl_usdhc3: usdhc3grp { 638 fsl,pins = < 639 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 640 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 641 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 642 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 643 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 644 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 645 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ 646 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */ 647 >; 648 }; 649 650 pinctrl_usdhc4: usdhc4grp { 651 fsl,pins = < 652 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 653 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 654 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 655 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 656 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 657 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 658 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ 659 >; 660 }; 661 }; 662}; 663 664&ipu1_di0_disp0 { 665 remote-endpoint = <&lcd_display_in>; 666}; 667 668&ldb { 669 status = "okay"; 670 671 lvds-channel@0 { 672 status = "okay"; 673 674 port@4 { 675 reg = <4>; 676 677 lvds0_out: endpoint { 678 remote-endpoint = <&panel_in>; 679 }; 680 }; 681 }; 682}; 683 684&pcie { 685 status = "okay"; 686}; 687 688&pwm1 { 689 pinctrl-names = "default"; 690 pinctrl-0 = <&pinctrl_pwm1>; 691 status = "okay"; 692}; 693 694&pwm3 { 695 pinctrl-names = "default"; 696 pinctrl-0 = <&pinctrl_pwm3>; 697 status = "okay"; 698}; 699 700&pwm4 { 701 pinctrl-names = "default"; 702 pinctrl-0 = <&pinctrl_pwm4>; 703 status = "okay"; 704}; 705 706&ssi1 { 707 status = "okay"; 708}; 709 710&uart1 { 711 pinctrl-names = "default"; 712 pinctrl-0 = <&pinctrl_uart1>; 713 status = "okay"; 714}; 715 716&uart2 { 717 pinctrl-names = "default"; 718 pinctrl-0 = <&pinctrl_uart2>; 719 status = "okay"; 720}; 721 722&usbh1 { 723 vbus-supply = <®_usb_h1_vbus>; 724 status = "okay"; 725}; 726 727&usbotg { 728 vbus-supply = <®_usb_otg_vbus>; 729 pinctrl-names = "default"; 730 pinctrl-0 = <&pinctrl_usbotg>; 731 disable-over-current; 732 status = "okay"; 733}; 734 735&usdhc3 { 736 pinctrl-names = "default"; 737 pinctrl-0 = <&pinctrl_usdhc3>; 738 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 739 wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 740 vmmc-supply = <®_3p3v>; 741 status = "okay"; 742}; 743 744&usdhc4 { 745 pinctrl-names = "default"; 746 pinctrl-0 = <&pinctrl_usdhc4>; 747 cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; 748 vmmc-supply = <®_3p3v>; 749 status = "okay"; 750}; 751 752&mipi_csi { 753 status = "okay"; 754 755 port@0 { 756 reg = <0>; 757 758 mipi_csi2_in: endpoint { 759 remote-endpoint = <&ov5640_to_mipi_csi2>; 760 clock-lanes = <0>; 761 data-lanes = <1 2>; 762 }; 763 }; 764}; 765
