1/*
2 * Copyright 2013 Pavel Machek <pavel@denx.de>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License V2.
6 */
7
8/dts-v1/;
9#include "imx6q.dtsi"
10
11/ {
12	model = "MicroSys sbc6x board";
13	compatible = "microsys,sbc6x", "fsl,imx6q";
14
15	memory@10000000 {
16		reg = <0x10000000 0x80000000>;
17	};
18};
19
20
21&fec {
22	pinctrl-names = "default";
23	pinctrl-0 = <&pinctrl_enet>;
24	phy-mode = "rgmii";
25	status = "okay";
26};
27
28&iomuxc {
29	imx6q-sbc6x {
30		pinctrl_enet: enetgrp {
31			fsl,pins = <
32				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
33				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
34				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
35				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
36				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
37				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
38				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
39				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
40				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
41				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
42				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
43				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
44				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
45				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
46				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
47				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
48			>;
49		};
50
51		pinctrl_uart1: uart1grp {
52			fsl,pins = <
53				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
54				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
55			>;
56		};
57
58		pinctrl_usbotg: usbotggrp {
59			fsl,pins = <
60				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
61			>;
62		};
63
64		pinctrl_usdhc3: usdhc3grp {
65			fsl,pins = <
66				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
67				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
68				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
69				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
70				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
71				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
72			>;
73		};
74	};
75};
76
77&uart1 {
78	pinctrl-names = "default";
79	pinctrl-0 = <&pinctrl_uart1>;
80	status = "okay";
81};
82
83&usbotg {
84	pinctrl-names = "default";
85	pinctrl-0 = <&pinctrl_usbotg>;
86	disable-over-current;
87	status = "okay";
88};
89
90&usdhc3 {
91	pinctrl-names = "default";
92	pinctrl-0 = <&pinctrl_usdhc3>;
93	status = "okay";
94};
95