1/* 2 * Copyright 2014 General Electric Company 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42/dts-v1/; 43 44#include "imx53.dtsi" 45#include <dt-bindings/input/input.h> 46 47/ { 48 model = "General Electric CS ONE"; 49 compatible = "ge,imx53-cpuvo", "fsl,imx53"; 50 51 aliases { 52 spi0 = &cspi; 53 spi1 = &ecspi1; 54 spi2 = &ecspi2; 55 }; 56 57 chosen { 58 stdout-path = "&uart1:115200n8"; 59 }; 60 61 memory@70000000 { 62 device_type = "memory"; 63 reg = <0x70000000 0x20000000>, 64 <0xb0000000 0x20000000>; 65 }; 66 67 cko2_11M: sgtl-clock-cko2 { 68 compatible = "fixed-clock"; 69 #clock-cells = <0>; 70 clock-frequency = <11289600>; 71 }; 72 73 sgtlsound: sound { 74 compatible = "fsl,imx53-cpuvo-sgtl5000", 75 "fsl,imx-audio-sgtl5000"; 76 model = "imx53-cpuvo-sgtl5000"; 77 ssi-controller = <&ssi2>; 78 audio-codec = <&sgtl5000>; 79 audio-routing = 80 "MIC_IN", "Mic Jack", 81 "Mic Jack", "Mic Bias", 82 "Headphone Jack", "HP_OUT"; 83 mux-int-port = <2>; 84 mux-ext-port = <6>; 85 }; 86 87 reg_sgtl5k: regulator-sgtl5k { 88 compatible = "regulator-fixed"; 89 regulator-name = "regulator-sgtl5k"; 90 regulator-min-microvolt = <3300000>; 91 regulator-max-microvolt = <3300000>; 92 regulator-always-on; 93 }; 94 95 reg_usb_otg_vbus: regulator-usb-otg-vbus { 96 compatible = "regulator-fixed"; 97 regulator-name = "usbotg_vbus"; 98 regulator-min-microvolt = <5000000>; 99 regulator-max-microvolt = <5000000>; 100 pinctrl-0 = <&pinctrl_usb_otg_vbus>; 101 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; 102 enable-active-high; 103 }; 104 105 reg_usb_vbus: regulator-usb-vbus { 106 compatible = "regulator-fixed"; 107 regulator-name = "usbh1_vbus"; 108 regulator-min-microvolt = <5000000>; 109 regulator-max-microvolt = <5000000>; 110 regulator-always-on; 111 }; 112 113 reg_usbh2_vbus: regulator-usbh2-vbus { 114 compatible = "regulator-fixed"; 115 regulator-name = "usbh2_vbus"; 116 regulator-min-microvolt = <5000000>; 117 regulator-max-microvolt = <5000000>; 118 pinctrl-names = "default"; 119 pinctrl-0 = <&pinctrl_usbh2_vbus>; 120 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; 121 enable-active-high; 122 }; 123 124 reg_usbh3_vbus: regulator-usbh3-vbus { 125 compatible = "regulator-fixed"; 126 regulator-name = "usbh3_vbus"; 127 regulator-min-microvolt = <5000000>; 128 regulator-max-microvolt = <5000000>; 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_usbh3_vbus>; 131 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; 132 enable-active-high; 133 }; 134 135 reg_tsiref: regulator-tsiref { 136 compatible = "regulator-fixed"; 137 regulator-name = "tsiref"; 138 regulator-min-microvolt = <2500000>; 139 regulator-max-microvolt = <2500000>; 140 regulator-always-on; 141 }; 142 143 reg_3v3: regulator-3v3 { 144 /* TPS54320 */ 145 compatible = "regulator-fixed"; 146 regulator-name = "3V3"; 147 regulator-min-microvolt = <3300000>; 148 regulator-max-microvolt = <3300000>; 149 regulator-always-on; 150 }; 151 152 reg_3v3_lcd: regulator-3v3-lcd { 153 /* MIC2009 */ 154 compatible = "regulator-fixed"; 155 regulator-name = "LCD_3V3"; 156 vin-supply = <®_3v3>; 157 regulator-min-microvolt = <3300000>; 158 regulator-max-microvolt = <3300000>; 159 regulator-always-on; 160 }; 161 162 pwm_bl: backlight { 163 compatible = "pwm-backlight"; 164 pwms = <&pwm2 0 50000>; 165 brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 166 38 40 43 45 48 51 53 56 58 61 63 66 68 71 167 73 76 79 81 84 86 89 91 94 96 99 102 104 168 107 109 112 114 117 119 122 124 127 130 169 132 135 137 140 142 145 147 150 153 155 170 158 160 163 165 168 170 173 175 178 181 171 183 186 188 191 193 196 198 201 204 206 172 209 211 214 216 219 221 224 226 229 232 173 234 237 239 242 244 247 249 252 255>; 174 default-brightness-level = <0>; 175 enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; 176 power-supply = <®_3v3_lcd>; 177 }; 178 179 leds { 180 compatible = "pwm-leds"; 181 182 alarm-brightness { 183 pwms = <&pwm1 0 100000>; 184 max-brightness = <255>; 185 }; 186 }; 187 188 gpio-poweroff { 189 compatible = "gpio-poweroff"; 190 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 191 }; 192 193 gpio-restart { 194 compatible = "gpio-restart"; 195 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 196 active-delay = <100>; 197 inactive-delay = <10>; 198 wait-delay = <100>; 199 }; 200 201 power-gpio-keys { 202 compatible = "gpio-keys"; 203 204 power-button { 205 label = "Power button"; 206 gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; 207 linux,code = <KEY_POWER>; 208 }; 209 }; 210 211 touch-lock-key { 212 compatible = "gpio-keys"; 213 214 touch-lock-button { 215 label = "Touch lock button"; 216 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 217 linux,code = <KEY_F12>; 218 }; 219 }; 220 221 usbphy2: usbphy-2 { 222 compatible = "usb-nop-xceiv"; 223 vcc-supply = <®_3v3>; 224 reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; 225 clock-names = "main_clk"; 226 clock-frequency = <24000000>; 227 clocks = <&clks IMX5_CLK_CKO2>; 228 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; 229 assigned-clock-parents = <&clks IMX5_CLK_OSC>; 230 }; 231 232 usbphy3: usbphy-3 { 233 compatible = "usb-nop-xceiv"; 234 vcc-supply = <®_3v3>; 235 reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; 236 clock-names = "main_clk"; 237 238 clock-frequency = <24000000>; 239 clocks = <&clks IMX5_CLK_CKO2>; 240 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; 241 assigned-clock-parents = <&clks IMX5_CLK_OSC>; 242 }; 243 244 panel-lvds0 { 245 compatible = "nvd,9128"; 246 power-supply = <®_3v3_lcd>; 247 248 port { 249 panel_in_lvds0: endpoint { 250 remote-endpoint = <&lvds0_out>; 251 }; 252 }; 253 }; 254}; 255 256&usbphy0 { 257 vcc-supply = <®_3v3>; 258}; 259 260&usbphy1 { 261 vcc-supply = <®_3v3>; 262}; 263 264&audmux { 265 pinctrl-names = "default"; 266 pinctrl-0 = <&pinctrl_audmux>; 267 status = "okay"; 268}; 269 270&cpu0 { 271 /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ 272 operating-points = < 273 /* kHz uV */ 274 166666 850000 275 400000 900000 276 800000 1050000 277 1000000 1200000 278 >; 279}; 280 281&ecspi1 { 282 pinctrl-names = "default"; 283 pinctrl-0 = <&pinctrl_ecspi1>; 284 cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW 285 &gpio4 10 GPIO_ACTIVE_LOW 286 &gpio4 11 GPIO_ACTIVE_LOW 287 &gpio4 12 GPIO_ACTIVE_LOW>; 288 status = "okay"; 289 290 spidev0: spi@0 { 291 compatible = "ge,achc"; 292 reg = <0>; 293 spi-max-frequency = <1000000>; 294 }; 295 296 spidev1: spi@1 { 297 compatible = "ge,achc"; 298 reg = <1>; 299 spi-max-frequency = <1000000>; 300 }; 301 302 gpioxra0: gpio@2 { 303 compatible = "exar,xra1403"; 304 reg = <2>; 305 gpio-controller; 306 #gpio-cells = <2>; 307 spi-max-frequency = <1000000>; 308 }; 309 310 gpioxra1: gpio@3 { 311 compatible = "exar,xra1403"; 312 reg = <3>; 313 gpio-controller; 314 #gpio-cells = <2>; 315 spi-max-frequency = <1000000>; 316 }; 317}; 318 319&ecspi2 { 320 pinctrl-names = "default"; 321 pinctrl-0 = <&pinctrl_ecspi2>; 322 num-chipselects = <1>; 323 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; 324 status = "okay"; 325 326 da9053@0 { 327 compatible = "dlg,da9053-aa"; 328 reg = <0>; 329 interrupt-parent = <&gpio3>; 330 interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 331 spi-max-frequency = <1000000>; 332 dlg,tsi-as-adc; 333 tsiref-supply = <®_tsiref>; 334 335 regulators { 336 buck1_reg: buck1 { 337 regulator-name = "BUCKCORE"; 338 regulator-min-microvolt = <500000>; 339 regulator-max-microvolt = <2075000>; 340 regulator-always-on; 341 }; 342 343 buck2_reg: buck2 { 344 regulator-name = "BUCKPRO"; 345 regulator-min-microvolt = <500000>; 346 regulator-max-microvolt = <2075000>; 347 regulator-always-on; 348 }; 349 350 buck3_reg: buck3 { 351 regulator-name = "BUCKMEM"; 352 regulator-min-microvolt = <925000>; 353 regulator-max-microvolt = <2500000>; 354 regulator-always-on; 355 }; 356 357 buck4_reg: buck4 { 358 regulator-name = "BUCKPERI"; 359 regulator-min-microvolt = <1800000>; 360 regulator-max-microvolt = <3600000>; 361 regulator-always-on; 362 }; 363 364 ldo1_reg: ldo1 { 365 regulator-name = "ldo1_1v3"; 366 regulator-min-microvolt = <600000>; 367 regulator-max-microvolt = <1800000>; 368 regulator-always-on; 369 }; 370 371 ldo2_reg: ldo2 { 372 regulator-name = "ldo2_1v3"; 373 regulator-min-microvolt = <600000>; 374 regulator-max-microvolt = <1800000>; 375 regulator-always-on; 376 }; 377 378 ldo3_reg: ldo3 { 379 regulator-name = "ldo3_3v3"; 380 regulator-min-microvolt = <1725000>; 381 regulator-max-microvolt = <3300000>; 382 regulator-always-on; 383 }; 384 385 ldo4_reg: ldo4 { 386 regulator-name = "ldo4_2v775"; 387 regulator-min-microvolt = <1725000>; 388 regulator-max-microvolt = <3300000>; 389 regulator-always-on; 390 }; 391 392 ldo5_reg: ldo5 { 393 regulator-name = "ldo5_3v3"; 394 regulator-min-microvolt = <1200000>; 395 regulator-max-microvolt = <3600000>; 396 regulator-always-on; 397 }; 398 399 ldo6_reg: ldo6 { 400 regulator-name = "ldo6_1v3"; 401 regulator-min-microvolt = <1200000>; 402 regulator-max-microvolt = <3600000>; 403 regulator-always-on; 404 }; 405 406 ldo7_reg: ldo7 { 407 regulator-name = "ldo7_2v75"; 408 regulator-min-microvolt = <1200000>; 409 regulator-max-microvolt = <3600000>; 410 regulator-always-on; 411 }; 412 413 ldo8_reg: ldo8 { 414 regulator-name = "ldo8_1v8"; 415 regulator-min-microvolt = <1200000>; 416 regulator-max-microvolt = <3600000>; 417 regulator-always-on; 418 }; 419 420 ldo9_reg: ldo9 { 421 regulator-name = "ldo9_1v5"; 422 regulator-min-microvolt = <1250000>; 423 regulator-max-microvolt = <3650000>; 424 regulator-always-on; 425 }; 426 427 ldo10_reg: ldo10 { 428 regulator-name = "ldo10_1v3"; 429 regulator-min-microvolt = <1200000>; 430 regulator-max-microvolt = <3600000>; 431 regulator-always-on; 432 }; 433 }; 434 }; 435 436}; 437 438&esdhc3 { 439 pinctrl-names = "default"; 440 pinctrl-0 = <&pinctrl_esdhc3>; 441 bus-width = <8>; 442 status = "okay"; 443}; 444 445&fec { 446 pinctrl-names = "default"; 447 pinctrl-0 = <&pinctrl_fec>; 448 phy-supply = <®_3v3>; 449 phy-mode = "rmii"; 450 phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; 451 status = "okay"; 452}; 453 454&i2c1 { 455 pinctrl-names = "default", "gpio"; 456 pinctrl-0 = <&pinctrl_i2c1>; 457 pinctrl-1 = <&pinctrl_i2c1_gpio>; 458 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 459 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 460 status = "okay"; 461 462 i2c-switch@70 { 463 compatible = "nxp,pca9547"; 464 #address-cells = <1>; 465 #size-cells = <0>; 466 reg = <0x70>; 467 reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; 468 469 i2c4: i2c@0 { 470 #address-cells = <1>; 471 #size-cells = <0>; 472 reg = <0>; 473 474 sgtl5000: codec@a { 475 compatible = "fsl,sgtl5000"; 476 reg = <0xa>; 477 #sound-dai-cells = <0>; 478 VDDA-supply = <®_sgtl5k>; 479 VDDIO-supply = <®_sgtl5k>; 480 clocks = <&cko2_11M>; 481 status = "okay"; 482 }; 483 }; 484 485 i2c5: i2c@1 { 486 #address-cells = <1>; 487 #size-cells = <0>; 488 reg = <1>; 489 490 rtc@30 { 491 compatible = "sii,s35390a"; 492 reg = <0x30>; 493 }; 494 495 temp@48 { 496 compatible = "ti,tmp112"; 497 reg = <0x48>; 498 }; 499 500 mma8453q: accelerometer@1c { 501 compatible = "fsl,mma8453"; 502 reg = <0x1c>; 503 interrupt-parent = <&gpio1>; 504 interrupts = <6 IRQ_TYPE_NONE>; 505 interrupt-names = "INT1"; 506 }; 507 508 mpl3115: pressure-sensor@60 { 509 compatible = "fsl,mpl3115"; 510 reg = <0x60>; 511 }; 512 513 eeprom: eeprom@50 { 514 compatible = "atmel,24c08"; 515 reg = <0x50>; 516 }; 517 }; 518 519 i2c6: i2c@2 { 520 #address-cells = <1>; 521 #size-cells = <0>; 522 reg = <2>; 523 }; 524 525 i2c7: i2c@3 { 526 #address-cells = <1>; 527 #size-cells = <0>; 528 reg = <3>; 529 }; 530 531 i2c8: i2c@4 { 532 #address-cells = <1>; 533 #size-cells = <0>; 534 reg = <4>; 535 }; 536 537 i2c9: i2c@5 { 538 #address-cells = <1>; 539 #size-cells = <0>; 540 reg = <5>; 541 }; 542 543 i2c10: i2c@6 { 544 #address-cells = <1>; 545 #size-cells = <0>; 546 reg = <6>; 547 }; 548 549 i2c11: i2c@7 { 550 #address-cells = <1>; 551 #size-cells = <0>; 552 reg = <7>; 553 }; 554 }; 555}; 556 557&i2c2 { 558 pinctrl-names = "default", "gpio"; 559 pinctrl-0 = <&pinctrl_i2c2>; 560 pinctrl-1 = <&pinctrl_i2c2_gpio>; 561 sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 562 scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; 563 status = "okay"; 564 565 touchscreen@4b { 566 compatible = "atmel,maxtouch"; 567 reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; 568 reg = <0x4b>; 569 interrupt-parent = <&gpio5>; 570 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 571 }; 572}; 573 574&i2c3 { 575 pinctrl-names = "default", "gpio"; 576 pinctrl-0 = <&pinctrl_i2c3>; 577 pinctrl-1 = <&pinctrl_i2c3_gpio>; 578 sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 579 scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 580 status = "okay"; 581}; 582 583&ldb { 584 status = "okay"; 585 586 lvds0: lvds-channel@0 { 587 status = "okay"; 588 589 port@2 { 590 lvds0_out: endpoint { 591 remote-endpoint = <&panel_in_lvds0>; 592 }; 593 }; 594 }; 595}; 596 597&pmu { 598 secure-reg-access; 599}; 600 601&pwm1 { 602 pinctrl-names = "default"; 603 pinctrl-0 = <&pinctrl_pwm1>; 604 status = "okay"; 605}; 606 607&pwm2 { 608 pinctrl-names = "default"; 609 pinctrl-0 = <&pinctrl_pwm2>; 610 status = "okay"; 611}; 612 613&ssi2 { 614 status = "okay"; 615}; 616 617&uart1 { 618 pinctrl-names = "default"; 619 pinctrl-0 = <&pinctrl_uart1>; 620 status = "okay"; 621}; 622 623&uart2 { 624 pinctrl-names = "default"; 625 pinctrl-0 = <&pinctrl_uart2>; 626 status = "okay"; 627}; 628 629&uart3 { 630 pinctrl-names = "default"; 631 pinctrl-0 = <&pinctrl_uart3>; 632 uart-has-rtscts; 633 status = "okay"; 634}; 635 636&uart4 { 637 pinctrl-names = "default"; 638 pinctrl-0 = <&pinctrl_uart4>; 639 status = "okay"; 640}; 641 642&uart5 { 643 pinctrl-names = "default"; 644 pinctrl-0 = <&pinctrl_uart5>; 645 status = "okay"; 646}; 647 648&usbotg { 649 dr_mode = "otg"; 650 phy_type = "utmi"; 651 vbus-supply = <®_usb_otg_vbus>; 652 pinctrl-0 = <&pinctrl_usb_otg>; 653 status = "okay"; 654}; 655 656&usbh1 { 657 vbus-supply = <®_usb_vbus>; 658 phy_type = "utmi"; 659 dr_mode = "host"; 660 status = "okay"; 661}; 662 663&usbh2 { 664 pinctrl-names = "default"; 665 pinctrl-0 = <&pinctrl_usbh2>; 666 phy_type = "ulpi"; 667 dr_mode = "host"; 668 fsl,usbphy = <&usbphy2>; 669 vbus-supply = <®_usbh2_vbus>; 670 status = "okay"; 671}; 672 673&usbh3 { 674 pinctrl-names = "default"; 675 pinctrl-0 = <&pinctrl_usbh3>; 676 phy_type = "ulpi"; 677 dr_mode = "host"; 678 vbus-supply = <®_usbh3_vbus>; 679 fsl,usbphy = <&usbphy3>; 680 status = "okay"; 681}; 682 683&iomuxc { 684 pinctrl-names = "default"; 685 pinctrl-0 = <&pinctrl_hog_rev6>; 686 687 pinctrl_audmux: audmuxgrp { 688 fsl,pins = < 689 MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400 690 MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400 691 MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400 692 MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400 693 MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400 694 MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400 695 MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400 696 MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400 697 >; 698 }; 699 700 pinctrl_ecspi1: ecspi1grp { 701 fsl,pins = < 702 MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400 703 MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400 704 MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400 705 /* ECSPI1_SS0, must treat as GPIO for EzPort */ 706 MX53_PAD_DISP0_DAT23__GPIO5_17 0x400 707 MX53_PAD_KEY_COL2__GPIO4_10 0x0 708 MX53_PAD_KEY_ROW2__GPIO4_11 0x0 709 MX53_PAD_KEY_COL3__GPIO4_12 0x0 710 >; 711 }; 712 713 pinctrl_ecspi2: ecspi2grp { 714 fsl,pins = < 715 MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0 716 MX53_PAD_EIM_OE__ECSPI2_MISO 0x0 717 MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0 718 MX53_PAD_EIM_RW__GPIO2_26 0x0 719 >; 720 }; 721 722 pinctrl_esdhc1: esdhc1grp { 723 fsl,pins = < 724 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 725 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 726 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 727 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 728 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 729 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 730 >; 731 }; 732 733 pinctrl_esdhc3: esdhc3grp { 734 fsl,pins = < 735 MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 736 MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 737 MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 738 MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 739 MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 740 MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 741 MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 742 MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 743 MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 744 MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 745 >; 746 }; 747 748 pinctrl_fec: fecgrp { 749 fsl,pins = < 750 MX53_PAD_FEC_MDC__FEC_MDC 0x0 751 MX53_PAD_FEC_MDIO__FEC_MDIO 0x0 752 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0 753 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0 754 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0 755 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0 756 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0 757 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0 758 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0 759 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0 760 >; 761 }; 762 763 pinctrl_hog_rev6: hoggrp { 764 fsl,pins = < 765 /* CKO2 */ 766 MX53_PAD_GPIO_3__CCM_CLKO2 0x4 767 /* DEFIB_SYNC_MARKER_IN_IRQ */ 768 MX53_PAD_GPIO_5__GPIO1_5 0x0 769 /* ACCELEROMETER_DATA_RDY_N */ 770 MX53_PAD_GPIO_6__GPIO1_6 0x0 771 /* TEMPERATURE_ALERT_N */ 772 MX53_PAD_GPIO_7__GPIO1_7 0x0 773 /* BAROMETRIC_PRESSURE_DATA_RDY_N */ 774 MX53_PAD_GPIO_8__GPIO1_8 0x0 775 /* DOCKING_I2C_INTERFACE_IRQ_N */ 776 MX53_PAD_PATA_DATA4__GPIO2_4 0x0 777 /* PWR_OUT_TO_DOCK_FAULT_N */ 778 MX53_PAD_PATA_DATA5__GPIO2_5 0x0 779 /* ENABLE_PWR_TO_DOCK_N */ 780 MX53_PAD_PATA_DATA6__GPIO2_6 0x0 781 /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */ 782 MX53_PAD_PATA_DATA7__GPIO2_7 0x0 783 /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */ 784 MX53_PAD_PATA_DATA12__GPIO2_12 0x0 785 /* DOCK_PRESENT_N */ 786 MX53_PAD_PATA_DATA13__GPIO2_13 0x0 787 /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */ 788 MX53_PAD_PATA_DATA14__GPIO2_14 0x0 789 /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */ 790 MX53_PAD_PATA_DATA15__GPIO2_15 0x0 791 /* RESET_IMX535_ETHERNET_PHY_N */ 792 MX53_PAD_EIM_A22__GPIO2_16 0x0 793 /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */ 794 MX53_PAD_EIM_A21__GPIO2_17 0x0 795 /* RESET_I2C1_BUS_SEGMENT_MUX_N */ 796 MX53_PAD_EIM_A20__GPIO2_18 0x0 797 /* RESET_IMX535_USB_HOST3_PHY_N */ 798 MX53_PAD_EIM_A19__GPIO2_19 0x0 799 /* ESDHC3_EMMC_NAND_RST_N */ 800 MX53_PAD_EIM_A18__GPIO2_20 0x0 801 /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */ 802 MX53_PAD_EIM_A17__GPIO2_21 0x0 803 /* POWER_DOWN_LVDS0_DESERIALIZER_N */ 804 MX53_PAD_EIM_A16__GPIO2_22 0x0 805 /* POWER_DOWN_LVDS1_DESERIALIZER_N */ 806 MX53_PAD_EIM_LBA__GPIO2_27 0x0 807 /* RESET_DP0_TRANSMITTER_N */ 808 MX53_PAD_EIM_EB0__GPIO2_28 0x0 809 /* RESET_DP1_TRANSMITTER_N */ 810 MX53_PAD_EIM_EB1__GPIO2_29 0x0 811 /* ENABLE_SPDIF_AUDIO_TO_DP0 */ 812 MX53_PAD_EIM_DA0__GPIO3_0 0x0 813 /* ENABLE_SPDIF_AUDIO_TO_DP1 */ 814 MX53_PAD_EIM_DA1__GPIO3_1 0x0 815 /* LVDS1_MUX_CTRL */ 816 MX53_PAD_EIM_DA2__GPIO3_2 0x0 817 /* LVDS0_MUX_CTRL */ 818 MX53_PAD_EIM_DA3__GPIO3_3 0x0 819 /* DP1_TRANSMITTER_IRQ */ 820 MX53_PAD_EIM_DA4__GPIO3_4 0x0 821 /* DP0_TRANSMITTER_IRQ */ 822 MX53_PAD_EIM_DA5__GPIO3_5 0x0 823 /* USB_RESET_N */ 824 MX53_PAD_EIM_DA6__GPIO3_6 0x0 825 /* ENABLE_BATTERY_CHARGER */ 826 MX53_PAD_EIM_DA7__GPIO3_7 0x0 827 /* SOFTWARE_CONTROLLED_PWR_CYCLE */ 828 MX53_PAD_EIM_DA8__GPIO3_8 0x0 829 /* SOFTWARE_CONTROLLED_POWERDOWN */ 830 MX53_PAD_EIM_DA9__GPIO3_9 0x0 831 /* DC_PWR_IN_OK */ 832 MX53_PAD_EIM_DA10__GPIO3_10 0x0 833 /* BATT_PRESENT_N */ 834 MX53_PAD_EIM_DA11__GPIO3_11 0xe4 835 /* PMIC_IRQ_N */ 836 MX53_PAD_EIM_DA12__GPIO3_12 0x0 837 /* PMIC_VDD_FAULT_STATUS_N */ 838 MX53_PAD_EIM_DA13__GPIO3_13 0x0 839 /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */ 840 MX53_PAD_EIM_DA14__GPIO3_14 0x0 841 /* NOT USED - AVAILABLE 3.3V GPIO */ 842 MX53_PAD_EIM_DA15__GPIO3_15 0x0 843 /* NOT USED - AVAILABLE 3.3V GPIO */ 844 MX53_PAD_EIM_D22__GPIO3_22 0x0 845 /* NOT USED - AVAILABLE 3.3V GPIO */ 846 MX53_PAD_EIM_D24__GPIO3_24 0x0 847 /* NBP_PUMP_VALVE_PWR_ENABLE */ 848 MX53_PAD_EIM_D25__GPIO3_25 0x0 849 /* NIBP_RESET_N */ 850 MX53_PAD_EIM_D26__GPIO3_26 0x0 851 /* LATCHED_OVERPRESSURE_N */ 852 MX53_PAD_EIM_D27__GPIO3_27 0x0 853 /* NBP_SBWTCLK */ 854 MX53_PAD_EIM_D29__GPIO3_29 0x0 855 /* ENABLE_WIFI_MODULE */ 856 MX53_PAD_GPIO_11__GPIO4_1 0x400 857 /* WIFI_MODULE_IRQ_N */ 858 MX53_PAD_GPIO_12__GPIO4_2 0x400 859 /* ENABLE_BLUETOOTH_MODULE */ 860 MX53_PAD_GPIO_13__GPIO4_3 0x400 861 /* RESET_IMX535_USB_HOST2_PHY_N */ 862 MX53_PAD_GPIO_14__GPIO4_4 0x400 863 /* ONKEY_IS_DEPRESSED */ 864 MX53_PAD_KEY_ROW3__GPIO4_13 0x0 865 /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */ 866 MX53_PAD_EIM_WAIT__GPIO5_0 0x0 867 /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */ 868 MX53_PAD_EIM_A25__GPIO5_2 0x0 869 /* I2C_PCAP_TOUCHSCREEN_IRQ_N */ 870 MX53_PAD_EIM_A24__GPIO5_4 0x0 871 /* NOT USED - AVAILABLE 1.8V GPIO */ 872 MX53_PAD_DISP0_DAT13__GPIO5_7 0x400 873 /* NOT USED - AVAILABLE 1.8V GPIO */ 874 MX53_PAD_DISP0_DAT14__GPIO5_8 0x400 875 /* NOT USED - AVAILABLE 1.8V GPIO */ 876 MX53_PAD_DISP0_DAT15__GPIO5_9 0x400 877 /* HOST_CONTROLLED_RESET_TO_LCD_N */ 878 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0 879 /* HOST_CONTROLLED_RESET_TO_PCAP_N */ 880 MX53_PAD_CSI0_MCLK__GPIO5_19 0x0 881 /* LR_SCAN_CTRL */ 882 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0 883 /* UD_SCAN_CTRL */ 884 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0 885 /* DATA_WIDTH_CTRL */ 886 MX53_PAD_CSI0_DAT10__GPIO5_28 0x0 887 /* BACKLIGHT_ENABLE */ 888 MX53_PAD_CSI0_DAT11__GPIO5_29 0x0 889 /* MED_USB_PORT_1_HOST_SELECT */ 890 MX53_PAD_EIM_A23__GPIO6_6 0x0 891 /* MED_USB_PORT_2_HOST_SELECT */ 892 MX53_PAD_NANDF_CLE__GPIO6_7 0x0 893 /* MED_USB_PORT_3_HOST_SELECT */ 894 MX53_PAD_NANDF_ALE__GPIO6_8 0x0 895 /* MED_USB_PORT_4_HOST_SELECT */ 896 MX53_PAD_NANDF_WP_B__GPIO6_9 0x0 897 /* MED_USB_PORT_5_HOST_SELECT */ 898 MX53_PAD_NANDF_RB0__GPIO6_10 0x0 899 /* MED_USB_PORT_6_HOST_SELECT */ 900 MX53_PAD_NANDF_CS0__GPIO6_11 0x0 901 /* MED_USB_PORT_7_HOST_SELECT */ 902 MX53_PAD_NANDF_WE_B__GPIO6_12 0x0 903 /* MED_USB_PORT_8_HOST_SELECT */ 904 MX53_PAD_NANDF_RE_B__GPIO6_13 0x0 905 /* MED_USB_PORT_TO_IMX_SELECT_0 */ 906 MX53_PAD_NANDF_CS1__GPIO6_14 0x0 907 /* MED_USB_PORT_TO_IMX_SELECT_1 */ 908 MX53_PAD_NANDF_CS2__GPIO6_15 0x0 909 /* MED_USB_PORT_TO_IMX_SELECT_2 */ 910 MX53_PAD_NANDF_CS3__GPIO6_16 0x0 911 /* POWER_AND_BOOT_STATUS_INDICATOR */ 912 MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 913 /* ACTIVATE_ALARM_LIGHT_RED */ 914 MX53_PAD_PATA_DIOR__GPIO7_3 0x0 915 /* ACTIVATE_ALARM_LIGHT_YELLOW */ 916 MX53_PAD_PATA_DA_1__GPIO7_7 0x0 917 /* ACTIVATE_ALARM_LIGHT_CYAN */ 918 MX53_PAD_PATA_DA_2__GPIO7_8 0x0 919 /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ 920 MX53_PAD_GPIO_16__GPIO7_11 0x0 921 /* BATTERY_STATUS_INDICATOR_AMBER */ 922 MX53_PAD_GPIO_17__GPIO7_12 0x0 923 /* AUDIO_ALARMS_SILENCED_INDICATOR */ 924 MX53_PAD_GPIO_18__GPIO7_13 0x0 925 >; 926 }; 927 928 pinctrl_i2c1: i2c1grp { 929 fsl,pins = < 930 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 931 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 932 >; 933 }; 934 935 pinctrl_i2c1_gpio: i2c1gpiogrp { 936 fsl,pins = < 937 MX53_PAD_EIM_D28__GPIO3_28 0x1e4 938 MX53_PAD_EIM_D21__GPIO3_21 0x1e4 939 >; 940 }; 941 942 pinctrl_i2c2: i2c2grp { 943 fsl,pins = < 944 MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4 945 MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4 946 >; 947 }; 948 949 pinctrl_i2c2_gpio: i2c2gpiogrp { 950 fsl,pins = < 951 MX53_PAD_EIM_D16__GPIO3_16 0x1e4 952 MX53_PAD_EIM_EB2__GPIO2_30 0x1e4 953 >; 954 }; 955 956 pinctrl_i2c3: i2c3grp { 957 fsl,pins = < 958 MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4 959 MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4 960 >; 961 }; 962 963 pinctrl_i2c3_gpio: i2c3gpiogrp { 964 fsl,pins = < 965 MX53_PAD_EIM_D18__GPIO3_18 0x1e4 966 MX53_PAD_EIM_D17__GPIO3_17 0x1e4 967 >; 968 }; 969 970 pinctrl_pwm1: pwm1grp { 971 fsl,pins = < 972 MX53_PAD_GPIO_9__PWM1_PWMO 0x5 973 >; 974 }; 975 976 pinctrl_pwm2: pwm2grp { 977 fsl,pins = < 978 MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5 979 >; 980 }; 981 982 pinctrl_uart1: uart1grp { 983 fsl,pins = < 984 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 985 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 986 >; 987 }; 988 989 pinctrl_uart2: uart2grp { 990 fsl,pins = < 991 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 992 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 993 >; 994 }; 995 996 pinctrl_uart3: uart3grp { 997 fsl,pins = < 998 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 999 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 1000 MX53_PAD_EIM_D23__UART3_CTS 0x1e4 1001 MX53_PAD_EIM_EB3__UART3_RTS 0x1e4 1002 >; 1003 }; 1004 1005 pinctrl_uart4: uart4grp { 1006 fsl,pins = < 1007 MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 1008 MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 1009 >; 1010 }; 1011 1012 pinctrl_uart5: uart5grp { 1013 fsl,pins = < 1014 MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 1015 MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 1016 >; 1017 }; 1018 1019 pinctrl_usb_otg_vbus: usb-otg-vbusgrp { 1020 fsl,pins = < 1021 /* USB_HS_OTG_VBUS_ENABLE */ 1022 MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4 1023 >; 1024 }; 1025 1026 pinctrl_usbh2: usbh2grp { 1027 fsl,pins = < 1028 /* USB H2 */ 1029 MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180 1030 MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180 1031 MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180 1032 MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180 1033 MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180 1034 MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180 1035 MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180 1036 MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180 1037 MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180 1038 MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180 1039 MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180 1040 MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5 1041 MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180 1042 >; 1043 }; 1044 1045 pinctrl_usbh2_vbus: usbh2-vbusgrp { 1046 fsl,pins = < 1047 /* USB_HS_HOST2_VBUS_ENABLE */ 1048 MX53_PAD_EIM_D31__GPIO3_31 0x0 1049 >; 1050 }; 1051 1052 pinctrl_usbh3_vbus: usbh3-vbusgrp { 1053 fsl,pins = < 1054 /* USB_HS_HOST3_VBUS_ENABLE */ 1055 MX53_PAD_CSI0_DAT9__GPIO5_27 0x0 1056 >; 1057 }; 1058 1059 pinctrl_usbh3: usbh3grp { 1060 fsl,pins = < 1061 /* USB H3 */ 1062 MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180 1063 MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180 1064 MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180 1065 MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180 1066 MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180 1067 MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180 1068 MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180 1069 MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180 1070 MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5 1071 MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180 1072 MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180 1073 MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180 1074 MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180 1075 >; 1076 }; 1077 1078 pinctrl_usb_otg: usbotggrp { 1079 fsl,pins = < 1080 /* USB_OTG_FAULT_N */ 1081 MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 1082 >; 1083 }; 1084}; 1085
