1/* 2 * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> 3 * 4 * The code contained herein is licensed under the GNU General Public 5 * License. You may obtain a copy of the GNU General Public License 6 * Version 2 or later at the following locations: 7 * 8 * http://www.opensource.org/licenses/gpl-license.html 9 * http://www.gnu.org/copyleft/gpl.html 10 */ 11 12#include "imx27-eukrea-cpuimx27.dtsi" 13 14/ { 15 model = "Eukrea MBIMXSD27"; 16 compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27"; 17 18 display0: CMO-QVGA { 19 model = "CMO-QVGA"; 20 native-mode = <&timing0>; 21 bits-per-pixel = <16>; 22 fsl,pcr = <0xfad08b80>; 23 24 display-timings { 25 timing0: 320x240 { 26 clock-frequency = <6500000>; 27 hactive = <320>; 28 vactive = <240>; 29 hback-porch = <20>; 30 hsync-len = <30>; 31 hfront-porch = <38>; 32 vback-porch = <4>; 33 vsync-len = <3>; 34 vfront-porch = <15>; 35 }; 36 }; 37 }; 38 39 backlight { 40 compatible = "gpio-backlight"; 41 pinctrl-names = "default"; 42 pinctrl-0 = <&pinctrl_backlight>; 43 gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; 44 }; 45 46 leds { 47 compatible = "gpio-leds"; 48 pinctrl-names = "default"; 49 pinctrl-0 = <&pinctrl_gpioleds>; 50 51 led1 { 52 label = "system::live"; 53 gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; 54 linux,default-trigger = "heartbeat"; 55 }; 56 57 led2 { 58 label = "system::user"; 59 gpios = <&gpio6 19 GPIO_ACTIVE_LOW>; 60 }; 61 }; 62 63 regulators { 64 #address-cells = <1>; 65 #size-cells = <0>; 66 compatible = "simple-bus"; 67 68 reg_lcd: regulator@0 { 69 pinctrl-names = "default"; 70 pinctrl-0 = <&pinctrl_lcdreg>; 71 compatible = "regulator-fixed"; 72 reg = <0>; 73 regulator-name = "LCD"; 74 regulator-min-microvolt = <5000000>; 75 regulator-max-microvolt = <5000000>; 76 gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; 77 enable-active-high; 78 }; 79 }; 80}; 81 82&cspi1 { 83 pinctrl-0 = <&pinctrl_cspi1>; 84 cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; 85 status = "okay"; 86 87 ads7846@0 { 88 compatible = "ti,ads7846"; 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_touch>; 91 reg = <0>; 92 interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; 93 spi-cpol; 94 spi-max-frequency = <1500000>; 95 ti,keep-vref-on; 96 }; 97}; 98 99&fb { 100 pinctrl-names = "default"; 101 pinctrl-0 = <&pinctrl_imxfb>; 102 display = <&display0>; 103 lcd-supply = <®_lcd>; 104 fsl,dmacr = <0x00040060>; 105 fsl,lscr1 = <0x00120300>; 106 fsl,lpccr = <0x00a903ff>; 107 status = "okay"; 108}; 109 110&i2c1 { 111 codec: codec@1a { 112 compatible = "ti,tlv320aic23"; 113 reg = <0x1a>; 114 }; 115}; 116 117&kpp { 118 linux,keymap = < 119 MATRIX_KEY(0, 0, KEY_UP) 120 MATRIX_KEY(0, 1, KEY_DOWN) 121 MATRIX_KEY(1, 0, KEY_RIGHT) 122 MATRIX_KEY(1, 1, KEY_LEFT) 123 >; 124 status = "okay"; 125}; 126 127&sdhci1 { 128 pinctrl-names = "default"; 129 pinctrl-0 = <&pinctrl_sdhc1>; 130 bus-width = <4>; 131 status = "okay"; 132}; 133 134&ssi1 { 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pinctrl_ssi1>; 137 codec-handle = <&codec>; 138 status = "okay"; 139}; 140 141&uart1 { 142 uart-has-rtscts; 143 pinctrl-names = "default"; 144 pinctrl-0 = <&pinctrl_uart1>; 145 status = "okay"; 146}; 147 148&uart2 { 149 uart-has-rtscts; 150 pinctrl-names = "default"; 151 pinctrl-0 = <&pinctrl_uart2>; 152 status = "okay"; 153}; 154 155&uart3 { 156 uart-has-rtscts; 157 pinctrl-names = "default"; 158 pinctrl-0 = <&pinctrl_uart3>; 159 status = "okay"; 160}; 161 162&iomuxc { 163 imx27-eukrea-cpuimx27-baseboard { 164 pinctrl_cspi1: cspi1grp { 165 fsl,pins = < 166 MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 167 MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 168 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 169 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */ 170 >; 171 }; 172 173 pinctrl_backlight: backlightgrp { 174 fsl,pins = < 175 MX27_PAD_PWMO__GPIO5_5 0x0 176 >; 177 }; 178 179 pinctrl_gpioleds: gpioledsgrp { 180 fsl,pins = < 181 MX27_PAD_PC_PWRON__GPIO6_16 0x0 182 MX27_PAD_PC_CD2_B__GPIO6_19 0x0 183 >; 184 }; 185 186 pinctrl_imxfb: imxfbgrp { 187 fsl,pins = < 188 MX27_PAD_LD0__LD0 0x0 189 MX27_PAD_LD1__LD1 0x0 190 MX27_PAD_LD2__LD2 0x0 191 MX27_PAD_LD3__LD3 0x0 192 MX27_PAD_LD4__LD4 0x0 193 MX27_PAD_LD5__LD5 0x0 194 MX27_PAD_LD6__LD6 0x0 195 MX27_PAD_LD7__LD7 0x0 196 MX27_PAD_LD8__LD8 0x0 197 MX27_PAD_LD9__LD9 0x0 198 MX27_PAD_LD10__LD10 0x0 199 MX27_PAD_LD11__LD11 0x0 200 MX27_PAD_LD12__LD12 0x0 201 MX27_PAD_LD13__LD13 0x0 202 MX27_PAD_LD14__LD14 0x0 203 MX27_PAD_LD15__LD15 0x0 204 MX27_PAD_LD16__LD16 0x0 205 MX27_PAD_LD17__LD17 0x0 206 MX27_PAD_CONTRAST__CONTRAST 0x0 207 MX27_PAD_OE_ACD__OE_ACD 0x0 208 MX27_PAD_HSYNC__HSYNC 0x0 209 MX27_PAD_VSYNC__VSYNC 0x0 210 >; 211 }; 212 213 pinctrl_lcdreg: lcdreggrp { 214 fsl,pins = < 215 MX27_PAD_CLS__GPIO1_25 0x0 216 >; 217 }; 218 219 pinctrl_sdhc1: sdhc1grp { 220 fsl,pins = < 221 MX27_PAD_SD1_CLK__SD1_CLK 0x0 222 MX27_PAD_SD1_CMD__SD1_CMD 0x0 223 MX27_PAD_SD1_D0__SD1_D0 0x0 224 MX27_PAD_SD1_D1__SD1_D1 0x0 225 MX27_PAD_SD1_D2__SD1_D2 0x0 226 MX27_PAD_SD1_D3__SD1_D3 0x0 227 >; 228 }; 229 230 pinctrl_ssi1: ssi1grp { 231 fsl,pins = < 232 MX27_PAD_SSI4_CLK__SSI4_CLK 0x0 233 MX27_PAD_SSI4_FS__SSI4_FS 0x0 234 MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1 235 MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1 236 >; 237 }; 238 239 pinctrl_touch: touchgrp { 240 fsl,pins = < 241 MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */ 242 >; 243 }; 244 245 pinctrl_uart1: uart1grp { 246 fsl,pins = < 247 MX27_PAD_UART1_TXD__UART1_TXD 0x0 248 MX27_PAD_UART1_RXD__UART1_RXD 0x0 249 MX27_PAD_UART1_CTS__UART1_CTS 0x0 250 MX27_PAD_UART1_RTS__UART1_RTS 0x0 251 >; 252 }; 253 254 pinctrl_uart2: uart2grp { 255 fsl,pins = < 256 MX27_PAD_UART2_TXD__UART2_TXD 0x0 257 MX27_PAD_UART2_RXD__UART2_RXD 0x0 258 MX27_PAD_UART2_CTS__UART2_CTS 0x0 259 MX27_PAD_UART2_RTS__UART2_RTS 0x0 260 >; 261 }; 262 263 pinctrl_uart3: uart3grp { 264 fsl,pins = < 265 MX27_PAD_UART3_TXD__UART3_TXD 0x0 266 MX27_PAD_UART3_RXD__UART3_RXD 0x0 267 MX27_PAD_UART3_CTS__UART3_CTS 0x0 268 MX27_PAD_UART3_RTS__UART3_RTS 0x0 269 >; 270 }; 271 }; 272}; 273
